The Singing Machine SMK250 SING-ALONG WITH BLUETOOTH MUSIC User Manual

The Singing Machine Company, Inc. SING-ALONG WITH BLUETOOTH MUSIC

Users Manual

V 1.0SMK250 USER’S GUIDE SING-ALONG WITH BLUETOOTH MUSIC PLEASE READ BEFORE OPERATING THIS EQUIPMENT
WarningsCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Caution marking is located on the bottom panel.DANGEROUS VOLTAGE: The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of suf cient magnitude to constitute a risk of electric shock to persons.WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modi cations to this equipment may cause harmful interference unless the modi cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modi cation is made.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.INDUSTRY CANADA NOTICE:This device complies with Industry Canada Iicense-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects lled with liquids, such as vases, shall be placed on the product.VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use.SAFETY VERIFICATION: This device is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services and also with FDA Radiation Performance Standards 21 CFR Subchapter.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.• The rating information is located at the bottom of the unit.Important Safety Information1. Read these Instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all Instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in accordance with the Manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. Do not place objects lled with water, such as a vase, on the apparatus.16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket.17. CAUTION: To reduce the risk of re or explosion, do not expose batteries to excessive heat such as sunshine, rehto ro erheat sources.CAN ICES-3(B)/NMB-3(B)CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN1The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
• Bluetooth wireless stereo audio streaming• Support A2DP Profiles for most smart phones / laptops• Mic Volume Controls• Echo Control• Microphone Jacks, 3.5mm x2• Line in jack 3.5mm (Aux input / Audio input)• Light EffectFeatureFeature / Included• Built-in speakers• Power: Requires AC power adapter or Batteries• Singalong unit • Microphones• AC power adapter• User ManualMicrophoneAC AdapterSing along unitIncluded2
FRONT VIEWIntroduction REAR VIEW 123456789101181213143
1. POWER Indicator: Will be light when unit turn on.2. ON/OFF Button: Press this button to turn on / off unit.3. ECHO Dial: Rotate to adjust echo sound effect.Location Controls4. BT Indicator: Will flash when unit turn to BT (Bluetooth mode) pairing.Will be light when Bluetooth pairing successfully.5. PAIR Button:Press to Pair the BT device or reconnect BT device6. LIGHT RING: Will show the light effect7. SPEAKER8. MIC Holder: Place the microphone on the holder9. MIC VOLUME Dial: Rotate to adjust the volume from the MIC input.10. LIGHTS Button: Press this button to show different lights effect and on /off11. MASTER VOLUME Dial: Rotate to adjust the main volume sound level.12. DC INPUT Jack: Connect power adapter for AC power.13. LINE IN (Aux in / Audio in) : Connect to external device audio output.14. MIC Inputs: Mic1 and Mic2 input jackInstall the mic holder to hold the Microphone onto unit. Setup Mic holder Install Mic holder4
Setup PowerConnect Power AdapterPlug the included AC adapter into the standard AC power outlet to power the Sing along unit. Connect small end to DC INPUT jack of main unit. After adapter connection, Press the ON/OFF button to turn on/off the Sing along unit. To turn on the unit, press the ON/OFF button, the Power indicator will light up.To turn it off, press the ON/OFF button again, the Power indicator is off.It is a four stages switch. Toggle press the LIGHTS button get the different brightness lights effect and on/off the lights. Sing along with the music by plugging in the provided microphone into either one of the microphone sockets on the unit.Adjust the ECHOdialof Sing alongUnitto enhance your voice for a concert hall effect.Connect Microphones require a microphone into the MIC 1 Input Socket or MIC 2 Input SocketSlide the ON/OFF switch of the MICROPHONE on and use the unit’s MIC VOLUME to adjust the volume of audio sound from the microphone.Requires a microphone (included) 1. Plug the microphone (see below figure) into the MIC 1 INPUT or MIC 2INPUT.2. Slide the ON /OFF switch of MICROPHONE,3. Use theMIC VOLUMEdial of Sing along Unit to adjust the volume of audio5sound from the microphone.Turning ON/OFFLights FunctionSing along FunctionEchoMicrophones
External devices that have a built-in Bluetooth feature can connect wirelessly to the Sing alongUnit.Bluetooth OperationPairing a Bluetooth device (No LINE IN device is plugged)1. Power on the unit by press the ON/OFF button, Power indicator will light.2. Set the Bluetooth function of your external device to ON and begin searching for devices. NOTE: The effective distance between your external device and this apparatus is 10 meters (30 feet).3. Once “SMK250” appears on the paired device list of your external device, select it.4. If you are asked for a password, enter “0000”.5. “Connected” will be heard and Pair indicator light blue steadily that indicates a connection has been established.6. A few seconds later your Bluetooth connection should be ready to use.Note: After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or your find it is unable to connect, repeat the above steps or press & hold the PAIR button again.1ˊFollow the “Getting Connected” steps above to pair your external device.2ˊTurn on the music player program on your external device and set it to play. 3ˊAudio played through the connected Bluetooth Device will now be heard through the speakers.4ˊAdjust the MASTER VOLUME to obtain the desired volume level.Getting ConnectedPlaying Music from an External Bluetooth DeviceExternal (auxiliary) audio sources or MP3 players can connect to the Sing Along unit via LINE IN. 1. Connect a 3.5mm Auxiliary Cable (not included) to the LINE IN jack at the left side of unitand to the Audio Output or Phones on the audio device you wish to play.2. Turn on both units. (The sound “Aux mode” can be heard) .3. After the connection, the external device will sound from speakers of your unit.Please note:-If not use the this function, please unplug it.LINE IN( AUDIOIN) Auxiliary Operation6
AC PowerAdapter Connect DC JackUse included adapter AC~ Input 100-240V 50/60 Hz , DC Output 5V, 0.8$$Bluetooth For Music Share V2.1 + EDR Master Power Output 1.8W x 2RMS Loud Speakers Spec 3 Inch,3 Watt , 4 OhmSpecifications are typical, individual units might vary. They are subject to continuous improvement without notice and without incurring any obligation.Specification7

Navigation menu