The Singing Machine SML385U CD+G/MP3+G Bluetooth Karaoke Player User Manual SML385U

Download:
Mirror Download [FCC.gov]
Document ID	3899944
Application ID	W18V3gQ3XrndAXxJB3HLvg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	394.79kB (4934881 bits)
Date Submitted	2018-06-25 00:00:00
Date Available	2018-06-25 00:00:00
Creation Date	2018-06-22 17:31:04
Document Lastmod	2018-06-22 17:31:04
Document Title	SML385U_User manual
Document Creator	Doro PDF Writer [1.92] [http://j.mp/the_sz]

TM
SML385UBK / SML385UW
INSTRUCTION MANUAL/ MANUAL DE INSTRUCCIONES
/ MODE D’EMPLOI
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
The Singing Machine® es marca registrada de The Singing Machine Co., Inc.
The Singing Machine® est une marque déposée de The Singing Machine Co., Inc.
Warnings
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Caution
marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not
be impeded for intended use.
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR CHAPTER 1,
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURED.
Warnings:
• This CD player employs a laser light beam. Only a qualified service person
should remove the cover or attempt to service this device, due to
possible eye injury.
• The use of controls, adjustments, or procedures other than those
specified herein might result in hazardous radiation exposure.
• The apparatus shall be used in an open area.
CAUTION!
Invisible laser radiation when open and interlocks defeated. Avoid exposure
to beam.
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the back of the unit.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada Iicense-exempt RSS
standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
Important Safety Information
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
1.
Read these Instructions.
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all Instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings. Install in accordance
with the Manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
14. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. Do not place objects filled with
water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and it
should remain readily accessible and operable during intended use. In
order to completely disconnect the apparatus from power, the mains
plug should be completely removed from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
— E1 —
Included
Please make sure that the following items are included.
Main Unit
Wired Microphone
AC Adapter
Manual
Audio/Video Cables
— E2 —
Location of Controls (Top/Front)
v w x yUV
at
ak
al
am
ar
as
bt
bk
bl
am
bm
bn
bo
bp
bq
br
1. LED Display
2. CD Door
3. MASTER VOLUME
Control
4. CDG/BT/USB Button
5. Skip  Button
Button
6. Play/Pause
7. Skip  Button
8. Skip +10 Button
9. Stop /Pair Button
10. REPEAT/PROGRAM
Button
11. DISCO LIGHT Slide
Switch
12. PROGRAM indicator
an
ao
ap
aq
13. Mic Holders
14. MIC Volume Control
15. ECHO Control
16. REPEAT indicator
17. MIC 2 Jack
18. ON/OFF indicator
19. Power ON/OFF Button
20. Record indicator
21. Record Button
22. USB slot
23. Auto Voice Control
24. PLAY/PAUSE indicator
22. BALANCE Control
23. CDG indicator
— E3 —
24.
25.
26.
27.
28.
MIC 1 Jack
Balance Button
CDG indicator
MIC 1 Jack
Speaker
Location of Controls (Rear)
bp
bq
br
bs
ct
26.
27.
28.
29.
30.
VIDEO OUT Jack
LINE IN Jack
AUDIO OUT Jack (R)
DC IN Jack (5.8V)
AUDIO OUT Jack (L)
— E4 —
Connection
Connecting the Microphone(s)
Microphones:
Connect a microphone into Mic jack 1 u
as well as Mic jack 2 v (when desired).
Note: Do not drop or tap the Mic as
damage to the Mic or speakers may occur.
Do not twirl the microphone cord as it will
cause damage to the encased wiring.
uv
Connecting the Unit to a TV
To output the video, lyrics and
audio to your TV, perform the
following steps:
REAR VIEW OF TV
VIDEO OUT
(yellow)
AUDIO OUT
(white - L
red - R)
VIDEO
INPUT
AUDIO
INPUT
RCA cables
Connect the RCA video cable
(Yellow) to the VIDEO OUT jack
and the audio cables (White
and Red) to the AUDIO OUT
jacks located on the back of the
Singing Machine.
Connect the opposite end of
the RCA video cable (Yellow) to
the VIDEO IN jack and the audio
cables (White and Red) to the
AUDIO IN on your TV.
Notes:
• This unit can be used with or without a TV, but it is highly recommended to use a TV in
order to utilize all the features.
• Also refer to the TV’s User Guide.
• To see the lyrics on the screen, you must use a CD+G disc or MP3+G files.
— E5 —
Connection
Connecting to AC Power
Insert the AC power cord into a
conveniently located AC outlet having
120V AC, 60Hz.
Note:
Make all connections before connecting to
AC power.
Connecting to Line In Jack
Connect an external device by using an
appropriate cable (3.5mm audio cable not
included) as shown.
To External Unit
AUDIO OUTPUT
/ HEADPHONE JACK
Note:
See page E13 to select and use the Line In
function.
LINE IN
Disco Lights
— E6 —
To illuminate the disco light and get
your desired lighting effect, slide the
Disco Light slide switch from the OFF
position to your desired level.
Operation
Playing a CDG
Connect the unit as described previously;
if using a CD+G, it is recommended to
connect to a TV. Press the ON/OFF
button to turn the unit on.
Lift open the CD door and insert a CD
or a CD+G by gently pressing it on the
center spindle. Then close the CD door.
Note:
• What is a CD+G?
A CD+G (CD+Graphics) is the standard
format for most karaoke discs that will
display the words on the screen.
Repeatedly press the CDG/BT/USB
button to select the CDG/CD mode;
“--” will appear when searching the disc
and then the total number of tracks will
appear. When a CDG disc is inserted, the
CDG indicator will light.
button to
Press the PLAY/PAUSE
start playback; if listening to a CD+G file,
the image and lyrics will appear on the
TV screen (if connected) and the PLAY/
PAUSE Indicator will light.
— E7 —
Operation
Playing a CDG (Continued)
Adjust the volume to a comfortable level
using the MASTER VOLUME control.
Notes:
• Never place anything other than a CD in
the compartment, as foreign objects can
damage the unit.
• If no disc is inserted, “No” will appear on
the display.
• If connected to a TV and/or other audio
source, adjust the volume of the external
unit using its own volume control.
Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
Rotate the ECHO control to add an echo
effect to your voice. Rotate towards
MAX to increase the echo effect.
AUTO VOICE CONTROL can be activated
by rotating the AUTO VOICE CONTROL.
The higher this control is set to, the more
the vocals on the multiplex recording
will be muted when the singer starts to
sing through the microphone. When the
singer stops singing, the recorded vocals
on the multiplex recording will resume to
normal.
— E8 —
Operation
Playing a CDG (Continued)
10
Rotate the BALANCE control
clockwise to hear the music and
recorded vocals from a multiplex
recording or counterclockwise to
hear the music only from a multiplex
recording.
Note: To use the BALANCE control, a
CD+G disc must be used, otherwise
it will operate as a standard Balance
control.
at
ak
11
SKIP: Advance or go back one track
by pressing the SKIP Back/SKIP
Forward  buttons.
12
REPEAT: During playback, press
the REPEAT/PROG button once to
repeatedly play the selected song;
the Repeat indicator will blink. Press
the REPEAT/PROG button a second
time to repeatedly play the whole
CD; the Repeat indicator will light
solid. Press it again to cancel Repeat
function, the Repeat indicator turns
off.
al
— E9 —
Operation
Playing a CDG (Continued)
am
13
am
PROGRAM: You can program up to
20 tracks on any disc for playback in
any desired order. While in the Stop
mode, press the REPEAT/PROG
button; the Program indicator will
blink and “00” will appear. Select the
first track using the SKIP Back/
SKIP Forward buttons. Press
the REPEAT/PROG button again to
confirm the entry. After selecting the
desired tracks the display will show
01, 02, etc. recognizing the tracks
selected have been programmed and
the program indicator will illuminate
solid red. Repeat to set up to 20
tracks into memory. When done,
press the PLAY/PAUSE
button
to start playback.
Note:
• Press the STOP /PAIR button TWICE
to stop and clear the program.
an
ao
14
PAUSE: During playback, if you
wish to pause the disc momentarily,
button;
press the PLAY/PAUSE
the PLAY/PAUSE indicator will
blink. Press again to resume normal
playback.
15
Press the STOP/PAIR button to
stop playback.
— E10 —
Operation
Playing a CDG (Continued)
16
aq
ap
RECORD YOUR SINGING:
To record your singing as well as the
music, press the RECORD button.
Recording will begin and the record
indicator will light solid.
When done recording, press the
RECORD button again; the record
indicator will turn off.
Notes:
• The recorded audio file will record onto the
USB drive.
• See section “Playing Songs from the USB”
to play back your recorded files.
17
— E11 —
Press the ON/OFF button to turn the
unit off.
Operation
Playing Songs from the USB
Connect the unit as described
previously. Press the ON/OFF button
to turn the unit on.
Insert a USB flash drive into the USB
port on the unit so it faces upward.
Make sure to download music from
the Karaoke store, see “Where to
Download MP3+G Files”.
Repeatedly press the CDG/USB/BT
button to select the USB mode; “usb”
will appear when searching the drive
and then the total number of files will
appear.
Note: The USB mode cannot be accessed
until a flash drive is inserted.
Press the PLAY/PAUSE
button
to start playback; if listening to an
MP3+G file, the image and lyrics
will appear on the TV screen (if
connected).
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
Note: If connected to a TV or other audio
source, adjust the volume of the TV
using its own volume control.
— E12 —
Operation
Playing Songs from the USB (Continued)
Connect microphone(s) and
slide the ON/OFF switch on the
microphone to the ON position.
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
Rotate the ECHO control to add an
echo effect to your voice. Rotate
towards MAX to increase the echo
effect.
AUTO VOICE CONTROL can be
activated by rotating the AVC
control. The higher this control is
set to, the more the vocals on the
multiplex recording will be muted
when the singer starts to sing
through the microphone. When the
singer stops singing, the recorded
vocals on the multiplex recording
will resume to normal.
10
Rotate the BALANCE control
clockwise to hear the music and
recorded vocals from a multiplex
recording or counterclockwise
to hear the music only from a
multiplex recording.
at
— E13 —
Operation
Playing Songs from the USB (Continued)
ak
11
SKIP: Advance or go back one track
by pressing the  or  buttons.
You can also skip ahead 10 files/
tracks using the Skip10+ button.
SEARCH: When playing any audio
from the USB, press and hold the
 or buttons. The USB will
search at high speed in the forward
or backward direction. Normal play
will continue when you release the
button.
During Stop mode you can also
select a file using the  or 
buttons to scroll right/left.
12
REPEAT: During playback, press
the REPEAT/PROG button once
during playback, the Repeat
indicator will blink and the current
track will be repeated. Press the
REPEAT/PROG button twice, the
Repeat indicator will blink, all MP3
tracks inside the current folder will
be repeated continuously. Press the
REPEAT/PROG button three time,
the Repeat indicator will light solid,
all MP3 tracks will be repeatedly.
To stop repeat function by press
the button again, the Repeat
indicator will turns off.
al
am
— E14 —
Operation
Playing Songs from the USB (Continued)
13
an
ao
am
ap
PROGRAM: You can program
up to 20 tracks for playback in
any desired order. While in Stop
mode, press the REPEAT/PROG
button; Program indicator will
blink and “P00”appear. Select the
first track using SKIP Back  or
SKIP Forward  buttons, then
press the REPEAT/PROG button.
Repeat to set up to 20 tracks into
memory. When done, press the
button to start
PLAY/PAUSE
playback.
Note: Press the STOP/PAIR button
TWICE to stop and clear the
program.
14
PAUSE: During playback, if
you wish to pause the music
momentarily, press the PLAY/
PAUSE
/ENTER button. Press
again to resume normal playback.
15
Press the STOP/PAIR button to
stop playback.
16
Press the ON/OFF button to turn
the unit off.
— E15 —
Operation
Using a Bluetooth Device
Connect the unit as described previously.
Press the ON/OFF button to turn the
unit on.
Repeatedly press the CDG/BT/USB
button to select the Bluetooth; “bt”
will blink in the display as the unit
automatically searches for and pairs a
previously paired Bluetooth device (if
previously paired). If no previously paired
devices are present, connect as shown in
the next step.
Note: You can also press the STOP/PAIR
button to disconnect any paired devices in
order to pair another device.
Turn on your device’s Bluetooth option
in settings to search for a discoverable
device with a Bluetooth signal. Select
“Singing Machine” from the device
results on the Bluetooth menu.
Note: Also refer to the user manual of your
Bluetooth device for detailed instructions.
“bt” will light solid in the display and a
successful pairing sound will be heard..
Notes:
• If your Bluetooth prompts you for a
passcode during the pairing process, please
enter “0000” to connect.
• On some Bluetooth devices, once pairing is
complete, select your Bluetooth device as
“Use as Audio Device” or similar.
• If connection is lost after successful
pairing, check to make sure the distance
between speaker and Bluetooth-enabled
device does not exceed 30 feet/10
meters.
• Nothing will appear on the connected TV
when using the Bluetooth mode.
— E16 —
Operation
Using a Bluetooth Device (Continued)
To control your Bluetooth device from
this unit, press the PLAY/PAUSE
button to start playback. Press the
PLAY/PAUSE
button during
playback to pause the song.
Adjust the volume to a comfortable level
using the MASTER VOLUME control on
this unit as well as the volume on your
Bluetooth device.
Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
Rotate the ECHO control to add an echo
effect to your voice. Rotate towards
MAX to increase the echo effect.
al
10
ak
11
at
12
RECORD YOUR SINGING: To record
your singing as well as the music,
press the RECORD button. Recording
will begin and the record indicator
will light solid. When done recording,
press the RECORD button again; the
record indicator will turn off.
13
Press the ON/OFF button to turn the
unit off.
— E17 —
Adjust the balance between the
speakers using the BALANCE control.
SKIP: Advance or go back one track
by pressing the SKIP /SKIP 
buttons.
Operation
Using the LINE IN Jack
Connect the unit as described previously.
Press the ON/OFF button to turn the
unit on.
Connect the external unit to the LINE IN
Jack on the back of this unit. Connecting
an external unit will allow the audio to
be played through your Singing Machine.
LINE IN function is automatically selected
once the audio cable is plugged in.
Notes:
• It is highly recommended to set the volume
on the auxiliary unit to 1/3 or lower to
avoid distortion.
• Skipping files/tracks is not possible on this
unit when using an external device.
Adjust the volume using the MASTER
VOLUME control on this unit or your
external device’s volume control.
Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
— E18 —
Operation
Using the LINE IN Jack (Continued)
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
Rotate the ECHO control to add an echo
effect to your voice. Rotate towards
MAX to increase the echo effect.
Adjust the balance between the
speakers using the BALANCE control.
RECORD YOUR SINGING: To record
your singing as well as the music, press
the RECORD button. Recording will
begin and the record indicator will light
solid. When done recording, press the
RECORD button again; the record
indicator will turn off.
Press the ON/OFF button to turn the
unit off.
— E19 —
Operation
Where to Download MP3+G Files
Helpful Hints:
The .mp3 and .cdg files are delivered for download in
a single, compressed MP3+G.zip file. The MP3+G file
cannot be played as a .zip file on a USB flash drive.
To play karaoke songs using a USB flash drive, the
MP3+G .zip file must be unzipped as follows:
• Connect a USB flash drive to your computer.
• Download the MP3+G file from your Digital
Locker and save the .zip* file to a folder on your
computer.
• Double click the .zip file to open the .zip (you
will see the .mp3 and .cdg files).
• Drag and drop the .mp3 and .cdg files to the
USB flash drive.
• Remove (eject) the USB flash drive from your
computer.
Turn on the Singing Machine and connect the USB
flash drive.
FAQ
• Where can I get additional help with the
file formats?
Visit http://singingmachine.com/smcmusic/ to get additional resources about
the right type of FILE FORMAT for your
system.
To purchase and download karaoke music,
please visit http://store.singingmachine.
com to access over 13,000+ of your
favorite karaoke songs. You will need a USB
flash drive (not included) to transfer the
downloads to this unit.
Follow these easy steps:
Go to http://store.singingmachine.com
using your internet browser, and then
register.
Select and purchase your favorite
karaoke music from the Singing
Machine Download Store.
Download your selected purchase(s)
from the Singing Machine Digital
Locker to your USB flash drive.
Insert the USB flash drive as shown on
page E12 and enjoy!
Note: Your downloaded songs can also be
burned to a blank CDR/CDRW.
— E20 —
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
• Power is not on; press the ON/OFF button to turn power on.
• Confirm the AC adapter is connected securely to the back of the unit.
• Connect the unit to a different outlet.
No Sound – General
• MASTER VOLUME is set to minimum; raise volume.
• Correct Function was not selected; select using the CDG/BT/USB button.
• If using an external device, raise the volume.
• Check if the LINE IN jack is still connected by a cable.
No Sound – If connected to a TV
• Volume on the TV is muted or too low.
• Correct source (usually AV) was not selected on the TV’s menu.
Lyrics do not appear on the TV screen
• If connected to a TV, Video plug is not connected properly; see page E5.
• If connected to a TV, select the correct source on the TV (usually AV).
• The file/track being played is not a track recording with lyrics. These are the only files
that allow you to view the lyrics on the TV screen.
• Nothing will appear on the TV screen when using Line In or Bluetooth.
File(s) on USB Jack not playing
• The file is corrupted; replace the file.
• The file is not in a format this unit will play.
• The connected USB device is not supported by the product.
No sound from the microphone
• Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
• Make sure the ON/OFF switch on the Mic is set to the ON position.
• Make sure the mic’s volume is not set too low.
• MASTER VOLUME is set to minimum; raise volume.
• Adjust the ECHO control past the mid point on the Singing Machine.
The Bluetooth device cannot be paired or connected with the unit
• You have not activated the Bluetooth function of your device; see page E16 or refer to
the Bluetooth device user’s manual.
• The system is not in pairing mode; press the STOP/PAIR button to restart pairing.
The Music is not available on the unit after successfully connecting the Bluetooth
• Ensure your Bluetooth device can support the A2DP Bluetooth profile.
• The volume on the external Bluetooth device is set to low or muted; raise as desired.
— E21 —
Specifications
AUDIO
OUTPUT POWER (MAXIMUM)................................................................................ 3.5 Watts (RMS)
OUTPUT IMPEDANCE ..................................................................................................................3 Ohms
CD PLAYER SECTION
FREQUENCY RESPONSE .............................................................................................. 100Hz - 20kHz
SIGNAL-TO-NOISE RATIO .............................................................................................................. 50dB
NUMBER OF PROGRAMS..................................................20 Step Random Access Programming
SAMPLING SYSTEM ........................................................................................8 Times Over Sampling
BLUETOOTH
Bluetooth Version ....................................................................................................................V2.1+EDR
Working Distance ..........................................Up to 30 feet/10 meters measured in open space
USB
Format..................................................................................................................................................FAT32
Maximum Compatibility...................................................................................................................32GB
AUX IN SECTION .......................................................................... 3.5 mm Stereo Headphone Jack
MICROPHONE ....................-74db 600 Ohm Impedance with 6.3 mm Dynamic Microphone
POWER SECTION ............................................................................................................ DC 5.8V 1.5A
POWER CONSUMPTION.............................................................................................................. 8.7 W
DIMENSIONS (HxWxD) .......................... 13.2 x 10.5 x 9.3 inches / 33.6 x 26.6 x 23.5 cm
WEIGHT...........................................................................................................................7.2 lbs / 3.3 kgs
Specifications are subject to change without notice.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks and logos by The Singing Machine Company, Inc. is under
license. Other trademarks and trade names are those of their respective owners.
— E22 —
Visit Our Website: www.singingmachine.com
Visite nuestro sitio web: www.singingmachine.com
Visitez notre site Web : www.singingmachine.com
Responsible Party Information as follow:
Company NameÿThe Singing Machine Company, Inc.
Addressÿ6301 NW 5th Way, Suite 2900, Fort Lauderdale, FL 33309, USA
Contact nameÿGary Atkinson
Telephoneÿ954-596-1000
Websiteÿwww.singingmachine.com
Copyright © 2018 All Rights Reserved.
Derechos de autor © 2018 Todos los derechos reservados.
Droit d’auteur © 2018 Tous Droits Réservés.
PRINTED IN CHINA
IMPRESO EN CHINA
IMPRIMÉ EN CHINE
385U-xxxx-ESF01-US

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 24
Creator                         : Doro PDF Writer [1.92] [http://j.mp/the_sz]
Create Date                     : 2018:06:22 17:31:04+08:00
Modify Date                     : 2018:06:22 17:31:04+08:00
Title                           : SML385U_User manual
Subject                         : SML385U_User manual
Author                          : 
Producer                        : 
Keywords                        : SML385U_User, manual

EXIF Metadata provided by EXIF.tools