The Watt Stopper d b a Qmotion ZIG24DECO Zigbee 2.4 Deco Remote User Manual 15 0094 Exhibit Cover

Qmotion Incorporated Zigbee 2.4 Deco Remote 15 0094 Exhibit Cover

Manual

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598Certification ExhibitFCC ID: 2ABLX-ZIG24DECOIC: 8832A-ZIG24DECOFCC Rule Part: 15.247IC Radio Standards Specification: RSS-210ACS Project Number: 15-0094Manufacturer: Qmotion IncorporatedModel: QZR-ZIG2400
PRELIMINARY FCC COMPLIANCE Warning: Changes or modifications to this device not expressly approved by Qmotion™ Incorporated could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.RF EXPOSUREThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment is in direct contact with the body of the user under normal operatingconditions. This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.IMPORTANTRead and understand all instructions before installing. Always wear personal protection equipment including safety glasses and gloves. Use a ladder per its manufacturer’s instructions. Work safely!QADVANCED USER GUIDEQMOTION ZIGBEE 2.4 DECO REMOTEPARTSThe ZigBee 2.4 Deco Remote is used to control ZigBee window coverings. In order to use the remote it must first be joined into the ZigBee network through a ZigBee compliant router (sold separately), in addition to the window coverings. Window coverings or treatments may be any one or a combination of Venetian vertical or horizontal blinds, roller shades, roman shades, cellular or honeycomb blinds, drapes, transitional blinds, etc.To join your Qmotion ZigBee window coverings to the ZigBee network follow the manufacturer’s instruction on the router and Qmotion’s procedures for the remote and window coverings. Once the remote and window treatments are joined you will now be able to operate the devices.Channel ButtonVarriablePositionButttonsChannel/Mode Reverse SideMode Select ButtonUp/Down ButtonsINDUSTRY CANADA COMPLIANCE Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement

Navigation menu