The Whistler Group SC01 200CH HANDHELD RADIO SCANNER User Manual
The Whistler Group 200CH HANDHELD RADIO SCANNER
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2235456 |
| Application ID | IbkMKKS1BLc1/zE7sRud6A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 164.98kB (2062213 bits) |
| Date Submitted | 2014-04-07 00:00:00 |
| Date Available | 2014-10-04 00:00:00 |
| Creation Date | 2009-03-27 12:06:32 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2014-03-18 14:25:41 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS2 (4.0) |
User’s Guide PRO-649 Handheld Radio Scanner Thank you for purchasing your Handheld Radio Scanner from RadioShack. Please read this user’s guide before installing, setting up, and using your new scanner Package Contents Scanner Antenna Belt Clip User’s Guide Quick Start Guide Alkaline Battery Holder Rechargeable Battery Holder www.radioshack.com Contents Features.................................................... 4 Understanding Your Scanner..............................5 Channel Storage Banks....................................6 Service Banks...................................................6 Preprogrammed Service Bank Frequencies.......6 Marine Service Bank.........................................6 Fire/Police Service Bank...................................8 Aircraft Service Bank........................................9 Ham Amateur Radio Service Bank...................9 Weather Channels............................................9 Understanding the Keypad..............................10 Understanding the Display...............................12 Additional Display Messages.........................13 Sub Bank Messages.......................................13 Setup...................................................... 14 Power Sources..................................................14 Using Batteries...............................................14 Charging Rechargeable Batteries..................16 Using External Power.....................................17 Connecting the Antenna..................................18 Connecting an Outdoor Antenna..................18 Connecting Headphones.................................18 Connecting an Extension Speaker.................19 Attaching/Removing the Belt Clip.................19 Basic Operation...................................... 20 Turning on the Scanner and Setting Squelch......20 Programming Known Frequencies into Channels...........................................................20 Searching for Active Frequencies....................21 Tune Search....................................................21 Service Bank Search.......................................22 Signal Stalker II Search...................................22 Storing Found Frequencies into Channels.......23 Scanning the Stored Channels.........................24 Turning Channel-Storage Banks On and Off......24 Monitoring a Stored Channel...........................25 Clearing a Stored Channel.............................25 Listening to the Marine Bank...........................25 Weather Features................................... 26 Listening to a Weather Channel.......................26 Weather Alerts.................................................26 Receiving All Weather Alerts.........................26 Receiving Alerts for Specific Areas................27 About SAME Signals....................................27 SAME Standby Mode...................................27 Skywarn..........................................................28 Settings................................................... 29 Setting Delay....................................................29 Locking Out Channels and Frequencies..........29 Reviewing and Removing Lock-outs..............30 Stored Channels...........................................30 Marine Service Bank.....................................30 Other Service Banks and Signal Stalker II....30 Removing Lock-outs from All Frequencies in a Service Bank..........................................31 Using Priority....................................................31 Using the Display Backlight.............................32 Turning the Key Tone On and Off....................32 Using the Key Lock...........................................32 Additional Information............................ 33 Cloning the Programmed Data........................33 Programming with a Personal Computer.........33 Initializing the Scanner.....................................33 Troubleshooting...............................................34 Birdie Frequencies............................................35 FCC Notice.......................................................35 Scanning Legally..............................................36 Care..................................................................37 Service and Repair...........................................37 Specifications...................................................37 Limited Warranty..............................................39 Features Features Your new PRO-649 Handheld Scanner lets you scan conventional transmissions and is preprogrammed with search banks of the most common frequencies used by public service agencies. Service Banks are accessed by pressing a one-touch search key—no complicated programming required. Your new scanner gives you direct access to over 25,000 frequencies, including those used by police and fire departments, ambulance services, aircraft, and amateur radio services. Your PRO-649 scanner also has these special features: Signal Stalker II – a powerful tool to rapidly detect, monitor, and store frequencies from nearby radio transmissions. Service Banks – easily locate types of calls by searching preprogrammed frequencies in separate marine, fire/ police, aircraft, ham, and weather banks. Display Backlight – makes the display easy to read in low-light situations. Lock-out Function – skip over specified channels or frequencies when scanning or searching. Ten Channel-Storage Banks – group and store 20 channels in each bank (200 total channels). Tune – tune to new and unlisted frequencies starting from a specified frequency. SAME/FIPS Weather Alert – displays the weather event and sounds an alert for the specific cities or counties you choose. Memory Backup – frequencies remain stored in memory for an extended time even without batteries. Scan Delay – delays scanning for two seconds before moving to another channel in order to hear replies. Priority Channel – set the scanner to check one channel every two seconds while scanning. Data Cloning – transfer the programmed data to another PRO-649 scanner. Key Lock – lock the scanner’s keys to help prevent accidentally changing the scanner’s programming. Flexible Antenna with BNC Connector – provides good reception of strong local signals. You can also connect an external antenna for improved reception of distant or weak signals. Three Power Options – power the scanner using batteries (rechargeable or non-rechargeable), external AC power (using an AC adapter, not supplied), or DC power (using a DC adapter, not supplied). Your PRO-649 scanner can receive these bands: Frequency Range Types of Transmissions 29–54 MHz 10-Meter Ham, VHF Lo, 6-Meter Ham 108–136.9875 MHz Aircraft 137–174 MHz Military Land Mobile, 2Meter Ham, VHF Hi 380–512 MHz UHF Aircraft, Federal Government, 70-cm Ham, UHF Standard, UHF “T” Note: See “Specifications” on page 37 for more information about frequency steps. Understanding Your Scanner Once you understand a few simple terms used in this manual and familiarize yourself with your scanner’s features, you can put the scanner to work for you. Simply determine the type of communications you want to receive, then set the scanner to scan them. A frequency is the receiving signal location (expressed in kHz or MHz). To find active frequencies, use the search function or consult an online resource such as www.radioreference.com. You can also search the Service Banks, which are preset groups of frequencies categorized by type of service. When you find a frequency, you can store it into a programmable memory location called a channel, Features Liquid-Crystal Display – easy to view and change programming information. Features which is grouped with other channels in a channelstorage bank. You can then scan the channel-storage banks to see if there is activity on the frequencies stored there. Each time the scanner finds an active frequency, it stays on that channel until the transmission ends. Channel Storage Banks To make it easier to identify and select the channels you want to listen to, your scanner divides the channels into 10 banks (1 to 10) with 20 channels each, for a total of 200 channels. You can use each channel-storage bank to group frequencies, such as those used by the police department, fire department, ambulance services, or aircraft. For example, you could program the frequencies used by your local police department starting with Channel 1 (the first channel in bank 1) and program the fire department frequencies starting with Channel 21 (the first channel in bank 2). Service Banks The scanner is preprogrammed with the frequencies allocated to marine, fire/police, aircraft, ham radio, and weather services. This is handy for quickly finding active frequencies instead of searching through an entire bank (see “Service Bank Search” on page 22). Preprogrammed Service Bank Frequencies Marine Service Bank Channel Frequency (MHz) Channel Frequency (MHz) 01 156.0500 63 156.1750 02 156.2500 64 156.2250 06 156.3000 07 156.3500 65 156.2750 08 156.4000 66 156.3250 09 156.4500 67 156.3750 10 156.5000 68 156.4250 160.8250 Channel Frequency (MHz) Channel Frequency (MHz) 156.5500 69 156.4750 12 156.6000 70 156.5250 13 156.6500 71 156.5750 14 156.7000 72 156.6250 15 156.7500 73 156.6750 16 156.8000 74 156.7250 17 156.8500 77 156.8750 18 156.9000 78 156.9250 19 156.9500 79 156.9750 20 157.0000 80 157.0250 161.6000 81 157.0750 21 157.0500 82 157.1250 22 157.1000 83 157.1750 23 157.1500 84 157.2250 24 157.2000 161.8250 161.8000 25 85 157.2500 161.8750 161.8500 26 86 157.3000 87 157.3500 157.3750 161.9750 161.9500 28 157.3250 161.9250 161.9000 27 157.2750 88 157.4250 157.4000 162.0000 n Note: Both frequencies (transmission and reception) are shown for marine channels used for duplex transmission. Features 11 Features Fire/Police Service Bank Group Frequency Range (MHz) Step (kHz) 33.420-33.980 20 37.020-37.420 20 39.020-39.980 20 42.020-42.940 20 44.620-45.860 40 45.880 45.900-46.060 40 46.080-46.500 20 153.770-154.130 60 154.145-154.445 15 154.650-154.950 15 155.010-155.370 60 155.415-155.700 15 155.730-156.210 60 158.730-159.210 60 166.250 170.150 453.0375-453.9625 12.5 458.0375-458.9625 12.5 460.0125-460.6375 12.5 465.0125-465.6375 12.5 Aircraft Service Bank Frequency Range (MHz) Step (kHz) 108.000-118.000 12.5 118.0125-136.9875 12.5 Ham Amateur Radio Service Bank Group Frequency Range (MHz) Step (kHz) 29.000-29.700 50.000-54.000 144.000-148.000 420.000-450.000 12.5 Weather Channels Channel Frequency (MHz) 162.400 162.425 162.450 162.475 162.500 162.525 162.550 Features Group Features Understanding the Keypad (Marine) Search the preprogrammed marine bank. (Fire Department/Police Department) Search the preprogrammed fire/police bank. (Aircraft) Search the preprogrammed aircraft bank. (HAM) Search the preprogrammed amateur radio bank. (Weather / Skywarn) - Search the seven preprogrammed weather channels. - Press and hold to jump to the Skywarn channel (channel 200). You must first program your local Skywarn frequency into channel 200 (see page 20). SCAN / MAN (Manual) - Enter Scan mode to scan programmed channels. - Enter Manual mode to stop scanning, directly enter a channel number, or monitor a single channel. PRI / ALERT - Enable and disable the priority feature. - Enable and disable SAME standby mode when monitoring a weather channel. TUNE / CLEAR - Enter Tune search. - Clear an incorrect entry. ed Select the direction for searching and scanning. L/O / L/O RVW - Lock-out selected channels or frequencies. - Review locked-out frequencies. - Turn the backlight on and off. - Press and hold to lock and unlock the keypad. PGM Program frequencies into channels. 10 PSE (Pause) Stop and restart a search or tune. 0–9 - Input a number when entering frequencies and selecting banks (0 selects bank 10). - The range of numbers above the key (1–20, 21–40, 41-60, etc.) indicates the channels stored in that bank. • / DELAY - Input a decimal point when entering frequencies. - Program a two-second delay for the selected channel. ENT (Enter) Complete the entry of frequencies. 11 Features (Signal Stalker II) Activate the Signal Stalker II function. Features Understanding the Display Row 1 – Signal Stalker II search is active. BANK – Appears with numbers (1–10) to indicate the scan bank. The bar under the bank number shows banks that are turned on for scanning. – Keypad locked. Row 2 WX – Searching weather channels. MAR – Searching the marine bank. FD/PD – Searching the fire/police bank. AIR – Searching the aircraft bank. HAM – Searching the amateur radio bank. Row 3 – Skywarn channel active. 000 – Channel number the scanner is tuned to. CH – Appears with channel number (1–200) or P (priority channel). 000.000 0 – Frequency the scanner is tuned to. – Batteries are low. L/0 – A locked out channel/frequency is manually selected or reviewed. Row 4 e d (Up/Down) – Search or scan direction. SRCH – Searching a service bank. SCAN – Scan mode. MAN – Manual mode. PGM – Program mode. PRI – Priority feature is active. DLY – Two-second delay is active. 12 Additional Display Messages ALL CH L-out – All channels locked out during scan or marine band search . b X Ch-FULL – All displayed bank channels are full. b X StorE – Frequency programmed into displayed bank’s channel. CLOnE – Clone mode. -dUPL- – Frequency is already stored in another channel. Error – Entry error. FLo ALL-CL – All the locked-out frequencies removed during a FD/PD, AIRCRAFT, HAM, or Signal Stalker II search. L-r – Review the locked-out frequencies. L-O Fr-FULL – Maximum of 50 frequencies already locked out. oFF tonE – Key tone deactivated. On tonE – Key tone activated. P – Scanner is tuned to the priority channel. -t- – Tune mode. Sub Bank Messages Lo VHF – Sub-bank 1 of the fire/police bank. Hi VHF – Sub-bank 2 of the fire/police bank. UHF – Sub-bank 3 of the fire/police bank. 10 M – Sub-bank 1 of the HAM bank. 6 M – Sub-bank 2 of the HAM bank. 2 M – Sub-bank 3 of the HAM bank. 70CM – Sub-bank 4 of the HAM bank. 13 Features Row 1 Row 2 Row 3 Row 4 Setup Power Sources You can power your scanner from one of three sources: • Rechargeable or non-rechargeable batteries (not supplied). • Standard AC power using an optional AC adapter (not supplied). Setup • Vehicle power using an optional DC adapter (not supplied). Using Batteries You can power the scanner with four AA batteries (not supplied). For the longest operation and best performance, we recommend alkaline batteries. If you use rechargeable batteries, we recommend nickel-metal hydride (Ni-MH) batteries. Use the black battery holder for non-rechargeable batteries. Use the yellow holder for rechargeable batteries. w Warning: Never install non-rechargeable batteries in the rechargeable yellow battery holder. Nonrechargeable batteries can get hot or explode if you try to recharge them. To install batteries 1. Slide open the battery compartment cover on the back of the scanner. 2. Place 4 AA batteries into the correct battery holder matching polarity symbols (+ / –): Black – Alkaline (non-rechargeable) Yellow – Rechargeable Ni-MH or Ni-Cd 3. Place the battery holder into the battery compartment. The battery holder fits only one way. Do not force it. 4. Replace the cover. 14 • Remove old or weak batteries. If you will not use the scanner with batteries for a month, remove the batteries. Batteries can leak chemicals that destroy electronic circuits. • In the event that a battery leaks, shows transformation, discoloration, or abnormal generation of heat, stop operation and replace the batteries. • Always dispose of old batteries promptly and properly. Do not bury or burn them. Setup Charging Rechargeable Batteries 1. Install rechargeable batteries using the yellow battery holder. 2. Connect an external power source to the PWR DC 9V jack using a 9V 400mA AC/DC adapter (not supplied). The average charging times are listed below. Battery Current Charge Time Ni-MH 1600 mAh 16 hours Ni-Cd 600 mAh 6 hours Ni-Cd 850 mAh 8 hours b Recharging Notes: • Do not overcharge batteries. Overcharging shortens battery life. • Using the scanner while charging will increase charge time. • Rechargeable batteries last longer and deliver more power if you let them fully discharge once a month. To do this, use the scanner until B appears. Recycle Rechargeable Batteries Placing rechargeable batteries in the trash can be harmful to the environment. Instead, recycle old rechargeable batteries at your local RadioShack store free of charge. RadioShack participates in the RBRC© battery recycling program, and is committed to preserving the environment and conserving natural resources. Call 1-800-THE-SHACK (1-800-843-7422) for more information. 16 Using External Power You can power your scanner using a power source that supplies 9V DC and delivers at least 400mA. Its center tip must be set to positive and its plug must fit the scanner’s PWR DC 9V jack. To use an external power source: 1. Connect the adapter (not supplied) to the scanner’s PWR DC 9V jack. 3. To disconnect, unplug the adapter from the power source first. If you use an external power source for regular operation, install alkaline batteries for emergencies. Rechargeable batteries will self-discharge, even when not used, and could have no usable power. n Notes: • Connecting an AC or DC adapter to the scanner disconnects internal batteries when you use the black non-rechargeable battery holder, but it does not disconnect internal batteries when you use the yellow rechargeable battery holder. • If the scanner stops working properly after connecting it to power, try resetting it (see “Initializing the Scanner” on page 33). • If you are powering from your vehicle’s power port and your vehicle’s engine is running, you might hear electrical noise from the engine while scanning. This is normal. w Caution: You must use a Class 2 power source that supplies 9V DC and delivers at least 400mA. Its center tip must be set to positive and its plug must fit the scanner’s PWR DC 9V jack. Using an adapter that does not meet these specifications could damage the scanner or the adapter. 17 Setup 2. Plug the adapter into the power source (standard AC power or your vehicle’s power port). Connecting the Antenna To attach the supplied flexible antenna: 1. Align the slots around the antenna’s connector with the tabs on the antenna jack. 2. Press the antenna down over the jack. Setup 3. Turn the antenna’s base clockwise until it locks into place. Connecting an Outdoor Antenna To connect an external antenna, follow the installation instructions supplied with the antenna. Use 50ohm coaxial cable to connect your scanner to the outdoor antenna. For lengths between 50 and 100 feet, use RG-8X low-loss dielectric coaxial cable. For lengths over 100 feet, use RG8. You also may need a BNC adapter (available at your local RadioShack store). w Warning: Use extreme caution when installing or removing an outdoor antenna. If the antenna starts to fall, let it go! It could contact overhead power lines. If the antenna touches a power line, touching the antenna, mast, cable, or guy wires can cause electrocution and death. Call the power company to remove the antenna. DO NOT attempt to do so yourself. Connecting Headphones For private listening, you can plug an Çinch (3.5-mm) mini-plug earphone or headphones (not supplied), into the HEADPHONE jack on the top of the scanner. This automatically disconnects the internal speaker. 18 Listening Safely Do not wear headphones, earphones, or earbuds while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be illegal in some areas. To protect your hearing, follow these guidelines: • Do not listen at high volume levels. Extended highvolume listening can lead to permanent hearing loss. • Avoid increasing the volume. Your ears will adapt to the volume level, so a level that does not cause discomfort could still damage your hearing. Connecting an Extension Speaker In a noisy area, an amplified extension speaker (available from your local RadioShack store or www.RadioShack.com), might provide more comfortable listening. Plug the speaker cable’s Ç inch (3.5 mm) miniplug into your scanner’s HEADPHONE jack. n Note: Use an amplified speaker with this scanner. Non-amplified speakers do not provide sufficient volume for comfortable listening. Attaching/Removing the Belt Clip You can attach the belt clip to the back of the scanner for hands-free carrying. Slide the supplied belt clip down on the back of the scanner. To remove the belt clip, pull the tab out and slide the clip upward. 19 Setup • Set the volume to the lowest setting. Then turn on your audio device and adjust the volume to a comfortable level. Basic Operation Turning on the Scanner and Setting Squelch 1. Turn SQUELCH counterclockwise until the indicator points to MIN. 2. Turn VOLUME clockwise to turn on the scanner. A welcome message appears. After about 3 seconds, you might hear a hissing sound. Then adjust VOLUME to a comfortable listening level. 3. Turn SQUELCH clockwise, just until the hissing sound stops. To perform a quick check of scanner operation, press . If you are near a NOAA weather station, you should hear weather information. Basic Operation n Notes: • Make sure the scanner’s antenna is connected before you turn it on. • To listen to a weak or distant station, turn SQUELCH counterclockwise. • If reception is poor, turn SQUELCH clockwise to cut out weak transmissions. • If SQUELCH is adjusted so you always hear a hissing sound, the scanner will not scan or search properly. Programming Known Frequencies into Channels 1. Press PGM. PGM appears. Enter the channel number (1–200) where you want to store a frequency, then press PGM again. 2. Use the number keys and • to enter the frequency (including the decimal point). 3. Press ENT to store the frequency into the channel. 4. To program the next channel in sequence, press PGM and repeat Steps 2 and 3. 20 n Notes: • If you made a mistake entering the frequency, Error appears and the scanner beeps three times when you press ENT. Start again from Step 2. • Your scanner automatically rounds the entered frequency down to the closest valid frequency. For example, if you enter a frequency of 151.473, your scanner accepts it as 151.470. • If you entered a frequency that is already stored in another channel, the scanner beeps three times and displays the lowest channel number where the frequency is already stored, while -dUPL(duplicate) and the frequency flashes. Press ENT if you still want to store the frequency. Press TUNE/ CLEAR to cancel. • Press •/DELAY to set a two-second delay on this channel. The scanner stores this setting in the channel. Searching for Active Frequencies Tune Search During a tune search, the scanner tunes up or down starting from a frequency you specify. 1. Press TUNE. PSE and the starting frequency appear. 2. If you want to change the starting frequency, enter a new frequency and press ENT. 3. Press PSE to start tune search. -t- appears on the display. 4. To change the tuning direction, press e or d. n Notes: • Press •/Delay to turn the two-second delay feature on and off. • Press L/O to lock-out a frequency. • Press PSE to pause searching. Press PSE again to resume. 21 Basic Operation If you do not have a list of frequencies in your area, use a Tune search or a Service Bank search to find transmissions. Or refer to an online resource such as www.radioreference.com. Service Bank Search Your scanner contains groups of preset frequencies called Service Banks. You can search for marine, fire/ police, aircraft, ham, and weather transmissions even if you do not know the specific frequencies that are used in your area. Then you can store the frequencies you find into the scanner’s channels (except for weather and marine banks, which are already stored as channels). 1. Press , , , , or . MAr, FIrE POLICE, AIr, HAM, or WEAtHEr appears respectively. After about two seconds, the service search starts. 2. To search for another active frequency in the selected bank, press e or d. See “Preprogrammed Service Bank Frequencies” on page 6 for a list of the frequencies. Basic Operation n Notes: • Press •/Delay to turn the two-second delay feature on and off. • Press L/O to lock-out a frequency. • Press PSE to pause searching. Press PSE again to resume. • To reverse the search direction at any time, press e or d. • If necessary, you can select search groups using the number keys. • The frequencies in the scanner’s Service Banks are preset. You cannot change them. Signal Stalker II Search Signal Stalker II is a powerful tool to rapidly detect, monitor, store, or lock-out frequencies from nearby radio transmissions. You can search for activity on all banks, Police/Fire, Aircraft, or Ham Service Banks. • When the scanner is in manual, scan, or tune mode, press to search for activity on all banks. 22 • When the scanner is in the Police/Fire, Aircraft, or Ham Service Bank, press to search for activity on the corresponding bank. • Activate and deactivate frequency sub-banks by pressing the corresponding number key while Signal Stalker II is searching. Once an active frequency is found, the transmission is played and you can store it in the scanner’s channelstorage banks. n Note: Priority mode is not available while using Signal Stalker II. Storing Found Frequencies into Channels Once you find interesting frequencies during a Tune, Service Bank, or Signal Stalker II search, you can store them in the scanner’s channel-storage banks. 2. If you want to change banks, enter the new bank number. 3. Press ENT to store the frequency. The channel and frequency flash twice. To cancel the operation, press TUNE/CLEAR. n Notes: • The frequency is automatically stored in the first empty channel of the selected bank. • If the scanner displays -dUPL-, the frequency is already stored in another channel. Press ENT if you want to continue storing the frequency. Press TUNE/CLEAR to cancel. • If there are no empty channels in the bank, Ch-FULL appears. You can select another bank or clear some channels in the current bank (see “Clearing a Stored Channel” on page 25). 23 Basic Operation 1. Press ENT when you find a frequency. The bank number and StorE appear. Scanning the Stored Channels Press SCAN/MAN until SCAN appears to continuously scan through all channels with stored frequencies. If the scanner finds an active frequency, it stops and displays that channel and frequency number, then it automatically begins scanning again when the transmission on that frequency ends. Basic Operation n Notes: • Press e or d to reverse the scanning direction. • Press •/DELAY to set the scanner to remain on the current channel for two seconds after the transmission ends. • To set the scanner to remain on the current channel, even after the transmission stops, press SCAN/ MAN at any time during the transmission so MAN appears and SCAN disappears (see “Monitoring a Stored Channel” below). • Press L/O to lock-out a channel. Turning Channel-Storage Banks On and Off To turn a channel-storage bank on or off, press the bank’s number key (1–0, using 0 for bank 10) during scanning. The channel-storage banks are on when they have a bar underneath them and off when no bar appears underneath them. n Notes: • The scanner does not scan any of the channels within the banks you have turned off. • You cannot turn off all banks; there must be at least one active bank. • You can manually select any channel in a bank, even if the bank is turned off. • When you turn on a bank during scanning, the scanner moves to the selected bank and scans it. • If no transmission is found, the scanner continues to scan through all selected banks. 24 Monitoring a Stored Channel You can continuously monitor a specific channel without scanning. This could be useful if you hear a transmission on a channel and do not want to miss any details, even though there might be periods of silence. 1. Press SCAN/MAN until MAN appears. 2. Enter the channel number (1–200). 3. Press SCAN/MAN again. Clearing a Stored Channel To remove a frequency stored in a channel. 1. Press SCAN/MAN to stop scanning. 2. Press the number keys to enter the channel number (1–200). 3. Press PGM. PGM appears. 5. To clear another channel, use the number keys to enter that channel number then press PGM again. Or, repeatedly press PGM until the desired channel number appears. Repeat Step 4. Listening to the Marine Bank Press to search the marine bank. MAr appears about two seconds, then the scanner starts searching from marine channel 16. To change the search direction, press e or d. Press PSE to stop searching. SRCH disappears and MAN appears. • To change the channel manually, press e or d. • To select a channel directly, enter the two-digit channel number. See “Marine Service Bank” on page 6 for a list of channels. • To lock-out a frequency, press L/O. Press PSE again to restart the marine bank search. 25 Basic Operation 4. Press 0 then ENT. The frequency number changes to 000.000 0 to indicate the channel is cleared. Weather Features The FCC (Federal Communications Commission) has allocated channels for use by the National Oceanic and Atmospheric Administration (NOAA). Regulatory agencies in other countries have also allocated channels for use by their weather reporting agencies. The NOAA and your local weather reporting agency broadcast the local forecast and regional weather information on one or more of these channels. Listening to a Weather Channel Basic Operation Press to hear your local forecast and regional weather information. WEAthEr appears for about two seconds, then the scanner starts searching the weather bank. Press PSE to stop searching the channels. SRCH disappears and MAN appears. To change the channel manually, press e or d. n Note: Your scanner incorporates weather alert as one of its features and is an extremely sensitive high quality receiver on the weather frequencies. However, the included flex antenna is optimized for general purpose scanning. If you use this scanner as your only means for receiving weather alerts, please make sure you are receiving a clear signal on the flex antenna or switch to an external antenna that gives you clear reception of a local NOAA weather broadcast. Weather Alerts Receiving All Weather Alerts To program the scanner to search for weather alerts every two seconds, set a weather channel as the priority channel. 1. Press 2. Select the weather channel you want to set as the priority channel. 3. Press and hold ENT then PRI/ALERT. P ChAnnEL is displayed momentarily. Then P CH flashes and 000.000 0 (or the previously-stored frequency) appears. 26 4. Press ENT to store the priority channel. The display flashes twice. Press TUNE/CLEAR to cancel. 5. Press PRI/ALERT during scanning or searching to turn on the priority feature. PRI appears. If the scanner detects a 1050 Hz weather alert tone on the programmed channel, the scanner sounds the alert tone and ALErt flashes. Press any key to turn off the alarm. Receiving Alerts for Specific Areas About SAME Signals The National Weather Service precedes each weather alert with a digitally encoded SAME (Specific Area Message Encoding) signal, then a 1050 Hz tone. The SAME signal includes a FIPS (Federal Information Processing Standard) code and an event code that corresponds with the type of alert being sent. Subdivisions State County 0-9 (0=entire area) 01-50 (00=all states) XXX (000=all counties) Example: 048439 (0=All; 48=Texas; 439=Tarrant County) A current list of FIPS codes is located at www.NWS.NOAA.gov/NWR. SAME Standby Mode In SAME Standby mode, your scanner monitors weather channels for SAME alerts for up to seven areas you specify by entering the FIPS codes. To program your scanner for SAME Standby mode: 1. Press 2. Press PGM to access the FIPS code entry mode. 3. Use e or d to select the desired FIPS code storage location. 4. Use the number keys to enter the FIPS code, then press ENT to store the code. 27 Basic Operation The FIPS code format is: 5. Repeat steps 3-4 for all the FIPS codes that you wish to store. 6. Press to exit FIPS code entry mode. The scanner displays F showing that FIPS codes are enabled. 7. Press PRI/ALERT to initiate SAME Standby mode. The scanner displays F [1-7] CH StAndby. The scanner will monitor weather channels for alerts with matching FIPS codes. To exit SAME Standby mode, press PRI/ALERT again. Basic Operation n Notes: • Press L/O during step 4 to lock-out FIPS entries; L/0 appears in the display. Press L/O again to enable FIPS entries; L/0 disappears. • If you do not enter any FIPS codes, or if your FIPS codes are locked out, when you enter SAME Standby mode the scanner receives alerts and warning messages for all receivable areas. • When a weather channel is set as the priority channel and priority operation is enabled (PRI shows in the display), all alerts are received and FIPS settings are ignored. • The scanner sounds an alert when it receives the SAME code. To stop the alert and ready the scanner to receive a new alert signal, press any key except • If you do not stop the alert within five minutes, the alert stops and the scanner beeps every ten seconds. If the scanner receives a new weather alert after five minutes, it sounds the new alert. Skywarn Many areas of the country have amateur radio repeaters that have been designated as “Skywarn” repeaters. During times of severe weather, these repeaters are used to relay reports of severe weather directly to meteorologists at a local National Weather Service forecast office. Using the Skywarn feature in your scanner, you can easily jump to your local Skywarn frequency and monitor these reports, in many cases hearing about severe weather in your area instantly as it occurs. 28 1. Before using this feature, you must program the Skywarn frequency into channel 200 (see “Programming Known Frequencies into Channels” on page 20). 2. To activate Skywarn, press and hold about two seconds. for 3. The scanner jumps to channel 200 and displays n Note: Refer to www.radioreference.com to find the skywarn frequencies in your area. Settings Setting Delay To avoid missing a reply in conversations, a two-second delay is automatically set for each channel. The scanner stops for two seconds after a transmission ends before it resumes scanning or searching. DLY appears in the display when the delay function is active. To turn delay off, press •/DELAY while the scanner is monitoring a channel or frequency. DLY disappears. To turn delay on: • If the scanner is scanning and stops on an active channel, quickly press •/DELAY before it resumes. • If the desired channel is not selected, manually select the channel, then press •/DELAY. Locking Out Channels and Frequencies You can increase the scanning or search speed by locking out channels or frequencies that have a continuous transmission, such as control channels, weather channels, or birdie frequencies. Press L/O when the scanner stops on a channel or frequency while scanning or searching. The scanner locks out the channel/frequency then continues scanning/searching. 29 Settings • If the scanner is searching, press •/DELAY. DLY appears and the scanner adds a two-second delay to every transmission it stops on in that bank. To manually lock-out a channel, select the channel then press L/O. L/0 appears in the display. n Notes: • Your scanner automatically locks out empty channels. • You can still manually select locked-out channels. • You can lock-out a maximum of 50 frequencies during a search. If you try to lock-out more, L-O FrFULL appears. • The scanner uses same lock-out list between the Service Banks and Signal Stalker II. Reviewing and Removing Lock-outs Stored Channels Manually select the channel and press L/O until L/0 disappears. Marine Service Bank 1. Press PSE during the Marine Service Bank search. 2. Press e or d to select channels manually. L/0 appears next to locked-out channels. 3. To remove the lock-out, press L/O until L/0 disappears. Settings Other Service Banks and Signal Stalker II 1. Hold down L/O/L/O RVW for about two seconds during a Service Bank or Signal Stalker II search. 2. Press e or d repeatedly to scroll through the list of locked-out frequencies. L-r and L/0 appear in the display. 3. Press L/O to remove the lock-out. The list scrolls to the next locked-out frequency. n Notes: • When you reach the highest locked-out frequency, the scanner beeps twice and rolls to the lowest locked-out frequency. • If the Service Bank has no locked-out frequencies, EMPty appears. 30 Removing Lock-outs from All Frequencies in a Service Bank 1. Hold down L/O/L/O RVW for about two seconds during a Service Bank or Signal Stalker II search. L-r appears. 2. While holding down TUNE/CLEAR, press L/O. FLo ALL–CL appears for about two seconds. Then the display alternates with YES ---Ent and No --CLEAr. 3. Press ENT. L-r EMPty appears. The scanner clears lock-outs from all frequencies in the Service Bank. Using Priority The priority feature sets the scanner to check one channel every two seconds while scanning. You can program one frequency into the priority channel. 1. Press PGM, then press PRI/ALERT. PCH and 000.000 0 or the previously stored frequency appear. 2. Enter the frequency you want stored in the priority channel, then press ENT. The display flashes twice. To turn on the priority feature, press PRI/ALERT during scanning or searching. PRI appears. The scanner checks the priority channel every two seconds and stays on the channel if there is activity. To turn off the priority feature, press PRI/ALERT. PRI disappears. 31 Settings To program a weather channel as the priority channel (see “Receiving All Weather Alerts “on page 26). Using the Display Backlight To turn the display backlight on and off: Press to turn on the backlight for five seconds. To turn it off sooner, press again. Press and hold PGM then press to turn on the display’s backlight for an extended time. To turn it off, press again. Turning the Key Tone On and Off The scanner is preset to sound a tone each time you press one of its keys (except ). To turn the key tone on and off: 1. If the scanner is on, turn it off then back on again. 2. WELCOME SCAnnInG rECEIVEr appears. 3. While the welcome message is on the screen, press 1 to turn on the key tone or press 2 to turn it off. Using the Key Lock Use the key lock feature to protect your scanner from accidental program changes. When the keypad is locked, the only controls that operate are VOLUME, and SQUELCH. Settings To turn on the key lock on and off: Hold down for about three seconds until the scanner beeps three times and appears or disappears. n Note: The key lock does not prevent the scanner from scanning channels or monitoring a single channel (whichever feature you last selected). 32 Additional Information Cloning the Programmed Data You can transfer the programmed data to and from a PRO-649 scanner using an optional connecting cable with Ç-inch (3.5mm) stereo phone plugs on both ends (available from your local RadioShack store or www.RadioShack.com). 1. Turn on both scanners. 2. Connect the connecting cable to each scanner’s PC/IF jack. CLOnE and UP to SEnd appears. 3. Press e on the host scanner. 4. SEndInG appears at the host scanner. The scanner sends the data. To exit the clone mode, remove the cable. CLOnE and Error may alternately appear when the scanner receives data from a scanner other than a PRO-649. If this happens when the scanner is receiving data from another PRO-649, turn off the scanner and turn it on again. Programming with a Personal Computer You can also upload or download programmed data to or from a PC using a USB cable available from your local RadioShack store or www.RadioShack.com. The application software is available online. Use a search engine to find “scanner programming software.” Follow instructions in the software package to upload and download data. Initializing the Scanner n Important: This procedure clears all information you stored in the scanner’s memory. Only initialize the scanner when you are sure the scanner is not working properly. 33 Additional Info If the scanner’s display locks up or does not work properly after you connect a power source, you might need to initialize the scanner. 1. Turn off the scanner, then turn it on again. WELCOME SCAnnInG rECEIVEr appears. 2. Press 0, then press 1 while the welcome message is on the screen. InItIAL appears for about two seconds, then YES --Ent and No --CLEAr appear alternately. 3. Press ENT. WAIt appears for about two seconds. n Note: Do not turn off the scanner until the initialization is complete. When the initialization is complete, 1CH 000.000 0 appears on the display. Troubleshooting The scanner is not working at all. • The AC or DC adapter might not be connected. Be sure the adapter’s barrel plug is fully inserted into the PWR DC 9V jack. The center tip of the adapter’s barrel plug must be set to positive. • The batteries might be dead or need to be recharged. Recharge the rechargeable batteries or replace the alkaline batteries. The scanner does not receive any stations or reception is poor. • An antenna is not connected or is connected incorrectly. Be sure an antenna is properly connected to the scanner. The scanner is on but does not scan. • The squelch might not be adjusted correctly. Turn SQUELCH clockwise. • Only one channel or no channels are stored. Store frequencies into more than one channel. Additional Info The keypad does not work. • Keylock is turned on. Turn off keylock by holding down for about three seconds • The scanner might need to be reset or initialized. Turn the scanner off then on again, or initialize the scanner (see “Initializing the Scanner” on page 33). 34 While scanning, the scanner locks on frequencies that have an unclear transmission. • Some frequencies programmed into the scanner might be the same as birdie frequencies. Avoid programming birdie frequencies or only listen to them manually. Birdie Frequencies Every scanner has birdie frequencies. Birdies are signals created inside the scanner’s receiver, which may interfere with transmissions on the same frequencies. If you program one of these frequencies, you hear only noise on that frequency. If the interference is not severe, you might be able to turn Squelch clockwise to omit the birdie. To find the birdies in your scanner, disconnect the antenna and move it away from the scanner. Make sure that no other nearby radio or TV sets are turned on near the scanner. Use the Tune to search every frequency range from its lowest frequency to the highest. Occasionally, the searching will stop as if it has found a signal, often without any sound. This is a birdie. Make a list of all the birdies in your scanner for future reference. FCC Notice 35 Additional Info This equipment has been tested and found to comply with the limits for a scanning receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Scanning Legally Your scanner covers frequencies used by many different groups including police and fire departments, ambulance services, government agencies, private companies, amateur radio services, military operations, pager services, and wireline (telephone and telegraph) service providers. It is legal to listen to almost every transmission your scanner can receive. However, there are some transmissions you should never intentionally listen to. These include: • Telephone conversations (cellular, cordless, or other private means of telephone signal transmission) • Pager transmissions • Any scrambled or encrypted transmissions Additional Info According to the Electronic Communications Privacy Act (ECPA), as amended, you are subject to fines and possible imprisonment for intentionally listening to, using, or divulging the contents of such a transmission unless you have the consent of a party to the communication (unless such activity is otherwise illegal). This scanner is designed to prevent reception of illegal transmissions, in compliance with the law which requires that scanners be manufactured in such a way as to not be easily modifiable to pick up those transmissions. Do not open your scanner’s case to make any modifications that could allow it to pick up transmissions that are not legal to listen to. Doing so could subject you to legal penalties. In some areas, mobile use of this scanner is unlawful or requires a permit. Check the laws in your area. We encourage responsible, legal scanner use. 36 Care Your scanner is not waterproof. Do not expose it to rain, moisture, or extremely high humidity. If the scanner gets wet, wipe it dry immediately. Use and store the scanner only in normal temperature environments. Handle the scanner carefully; do not drop it. Keep the scanner away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Service and Repair If your scanner is not performing as it should, take it to your local RadioShack store for assistance. To locate your nearest RadioShack, use the store locator feature on RadioShack’s website (www.radioshack.com), or call 1-800-The Shack (800-843-7422) and follow the menu options. Modifying or tampering with the scanner’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. Specifications Frequency Coverage (MHz) 10 Meter Amateur Radio.................29–30 (in 5 kHz steps) VHF Lo..............................................30–50 (in 5 kHz steps) 6 Meter Amateur Radio...................50–54 (in 5 kHz steps) Aircraft............................108–136.9875 (in 12.5 kHz steps) Government............................137–144 (in 12.5 kHz steps) 2 Meter Amateur Radio...............144–148 (in 5 kHz steps) VHF Hi...................................148–150.8 (in 12.5 kHz steps) VHF Hi........................................ 150.8-162 (in 5 kHz steps) VHF Hi...................................... 162-174 (in 12.5 kHz steps) Amateur Radio/Government 380–450 (in 12.5 kHz steps) UHF Standard.........................450–470 (in 12.5 kHz steps) UHF “T”...................................470–512 (in 12.5 kHz steps) Channels of Operation.................................. 200 channels 37 Additional Info Sensitivity (S+N)/N 20 dB 29–54 MHz..................................................................0.5 uV 108–136.9875 MHz.....................................................1.0 uV 137–174 MHz..............................................................0.5 uV 380–512 MHz..............................................................0.7 uV Spurious Rejection (FM @154 MHz)......................... 50 dB Selectivity ±8 kHz......................................................................... –6 dB ±17 kHz..................................................................... –50 dB Search Speed...................................... Up to 80 Steps/Sec Scan Speed................................... Up to 40 Channels/Sec Delay Time......................................................... 2 Seconds IF Frequencies 1st IF..................................................................... 10.7 MHz 2nd IF.......................................................................455 kHz IF Interference Ratio (10.7 MHz)........... 70 dB at 154 MHz Squelch Sensitivity Threshold..................................................Less than 0.5 uV Tight (FM).................................................. (S + N)/N 25 dB Tight (AM)................................................. (S + N)/N 20 dB Antenna Impedance.............................................50 Ohms Audio Output Power (10% THD)...........180 mW Nominal Built-In Speaker.................1 3/8 Inches (36 mm), 8 Ohms Operating Temperature......... 14° to 140°F (–10° to 60°C) Power Requirements...................................4 AA Batteries ............................................9V AC Adapter (not supplied) ............................................9V DC Adapter (not supplied) Current Drain (Squelched)....................................... 45 mA Dimensions (HWD)..............................5 Ð x 2 È x 1 Ï In ...............................................................(145 x 63 x 40 mm) Weight (without antenna)................approx. 7.8 oz (220 g) Additional Info Specifications and depictions are subject to change and improvement without notice. Actual product may vary from the images found in this document. 38 Limited Warranty 39 Additional Info RadioShack warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase from a RadioShack-owned store or an authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. You may contact RadioShack at: RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 04/08 Protect the environment by recycling your used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. ©2009. RadioShack Corporation. All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2009:03:27 12:06:32+08:00 Creator : Adobe InDesign CS2 (4.0) Modify Date : 2014:03:18 14:25:41+09:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:9ba8895c-3c99-4297-9e64-c10fa95c104a Document ID : adobe:docid:indd:e066e00d-1858-11de-a8c4-a140362e2103 Rendition Class : proof:pdf Derived From Instance ID : 562dbc8a-0960-11de-8208-f8ec529ed068 Derived From Document ID : adobe:docid:indd:13b755ac-088a-11de-9643-9492b6e88b53 Manifest Link Form : DirectStream, DirectStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, DirectStream, DirectStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:7de32607-374e-465a-bab5-8f386eac211f, uuid:62a42bc6-6068-4f53-b415-16cb2a770b73, uuid:775F3BF05DF7DD11AF18D958021E4A91, uuid:360727A9A2E8DD119E799B97A66FB740, uuid:40952c8d-80be-4508-9260-a2ab73c296fe, uuid:45342E003820DC1193FC9485FA6A132D, uuid:DD42014E3820DC1193FC9485FA6A132D, uuid:98B74CC7A4E7DD11B9C8CD7D49F358E5, uuid:EB4F1991D3FCDD11BEC09ED4E5AC1008, uuid:ED6DE521E2E3DD119703A7B2A6902011, uuid:11E63213A0E7DD11B9C8CD7D49F358E5, uuid:360727A9A2E8DD119E799B97A66FB740, uuid:801BDD79A73BDD11843F850020D708F0, uuid:801BDD79A73BDD11843F850020D708F0, uuid:90D6B7899DE7DD11B9C8CD7D49F358E5, uuid:9CB74CC7A4E7DD11B9C8CD7D49F358E5, uuid:62a42bc6-6068-4f53-b415-16cb2a770b73, uuid:1F68EA87959FDD11997DAD7C8D2BBCDD Manifest Reference Document ID : uuid:4139C56CDB5CDC118A88842AD511B794, uuid:4339C56CDB5CDC118A88842AD511B794, uuid:765F3BF05DF7DD11AF18D958021E4A91, uuid:D68832259AE7DD11B9C8CD7D49F358E5, uuid:80CE584FC2F6DD1184C0B6647031788C, uuid:D2D65342EA04DC11BDD59E2C20A0E2F4, uuid:7D3FDE10EE04DC11BDD59E2C20A0E2F4, uuid:97B74CC7A4E7DD11B9C8CD7D49F358E5, uuid:EA4F1991D3FCDD11BEC09ED4E5AC1008, uuid:EC6DE521E2E3DD119703A7B2A6902011, uuid:10E63213A0E7DD11B9C8CD7D49F358E5, uuid:D68832259AE7DD11B9C8CD7D49F358E5, uuid:CE5D4FBB7B31DD11B8CAD66E8C0EBC70, uuid:CE5D4FBB7B31DD11B8CAD66E8C0EBC70, uuid:8FD6B7899DE7DD11B9C8CD7D49F358E5, uuid:9BB74CC7A4E7DD11B9C8CD7D49F358E5, uuid:4339C56CDB5CDC118A88842AD511B794, uuid:1E68EA87959FDD11997DAD7C8D2BBCDD Metadata Date : 2014:03:18 14:25:41+09:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6432 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 40EXIF Metadata provided by EXIF.tools