Therma Tru Dr599 DR 599, 8 0 Glazed Fiberglass Impact Resistant Doors, Inswing & Outswing, Singles Doubles With And Without User Manual
2017-08-03
User Manual: Therma Tru Dr599 dr599 TDI approval data buildingcodes traderesources
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
Product Evaluation DR599 | 0716 Engineering Services Program The following product has been evaluated for compliance with the wind loads specified in the International Residential Code (IRC) and the International Building Code (IBC). This product evaluation is not an endorsement of this product or a recommendation that this product be used. The Texas Department of Insurance has not authorized the use of any information contained in the product evaluation for advertising, or other commercial or promotional purpose. This product evaluation is intended for use by those individuals who are following the design wind load criteria in Chapter 3 of the IRC and Section 1609 of the IBC. The design loads determined for the building or structure shall not exceed the design load rating specified for the products shown in the limitations section of this product evaluation. This product evaluation does not relieve a Texas licensed engineer of his responsibilities as outlined in the Texas Insurance Code, the Texas Administrative Code, and the Texas Engineering Practice Act. For more information, contact TDI Engineering Services Program at (800) 248-6032. Evaluation ID: DR-599 Product Name: 8"- 0" Glazed Fiberglass Impact Resistant Doors, Inswing & Outswing, Singles & Doubles with and without Impact Resistant Sidelites Manufacturer: Therma-Tru Corporation 118 Industrial Drive Edgerton, OH 43517 (419) 298-1740 General Description: System 1 2 3 4 5 Effective Date: Re-evaluation Date: Description 3'-0" x 8'-0" Glazed Fiberglass Single Door Inswing/Outswing (X) 3'-0" x 8'-0" Glazed Fiberglass Single Door w/ Boxed Sidelite & Combination Reinforced Mullion Inswing/Outswing (XO), (OX) 3'-0" x 8'-0" Glazed Fiberglass Single Door w/ Boxed Sidelites & Combination Reinforced Mullion Inswing/Outswing (OXO) 6'-0" x 8'-0" Glazed Fiberglass Double Door, Inswing/Outswing (XX) 6'-0" x 8'-0" Glazed Fiberglass Double Door, w/ Boxed Sidelites & Combination Mullion Inswing/Outswing (OXXO) Label Rating Inswing +50/-50 psf Outswing +50/-50 psf Inswing +47/-47 psf Outswing +47/-47 psf Inswing +47/-47 psf Outswing +47/-47 psf Inswing +50/-50 psf Outswing +50/-50 psf Inswing +50/-50 psf Outswing +50/-50 psf July 1, 2016 July 2020 Drawing Number TX-4195 Rev 1 TX-4196 Rev 1 TX-4197 Rev 1 TX-4198 Rev 1 TX-4199 Rev 1 Texas Department of Insurance | 333 Guadalupe Street | Austin, Texas 78714 | (800) 248-6032 | www.tdi.texas.gov | @TexasTDI DR599 | 0716 Dimensions: System 1 2 3 Overall Size Inswing: 37-3/4" x 98" Outswing: 37-3/4" x 96-3/4" Inswing: 76-3/4" x 98" Outswing: 76-3/4" x 96-3/4" Inswing: 115-3/4" x 98” Outswing: 115-3/4" x 96-3/4" 4 Inswing: 74-1/2" x 98” Outswing: 74-1/2" x 96-3/4" 5 Inswing: 151" x 98” Outswing: 151" x 96-3/4" Sidelite Panel Size 36" x 95-1/4" NA 36" x 95-1/4" 36" x 95-1/4" 36" x 95-1/4" 36" x 95-1/4" 36" x 95-1/4" 36-3/4" x 95-1/4" (with astragal) 36" x 95-1/4" 36-3/4" x 95-1/4" (with astragal) Hardware Description and Installation: System Component 1-5 Door Panel Size NA Door: 21" x 78-3/4" Sidelite: NA 36" x 95-1/4" Door: 21" x 78-3/4" Sidelite: 21" x 78-3/4" Quantity Attachment Method 4" Butt Hinges 4 Lock and deadbolt strike plate 1 per lockset and deadbolt Kwikset 200 Series Lock and Kwikset 780 Series Deadbolt 1 each For proper installation of Hardware and components refer to Therma-Tru Corporation Drawings: TX-4195 Rev 1, TX-4196 Rev 1, TX-4197 Rev 1, TX-4198 Rev 1, and TX-4199 Rev 1, dated 7/17/2012, signed and sealed by Lyndon F. Schmidt, P.E. on 7/22/2015. Product Identification (Manufacturer Label on Door): System Certification Agency Manufacturer’s Name or Code Name 1 Max Daylight Opening size Door: 21" x 78-3/4" Sidelite: NA Door: 21" x 78-3/4" Sidelite: 21" x 78-3/4" Door: 21" x 78-3/4" Sidelite: 21" x 78-3/4" Product Name Test Standards Texas Department of Insurance | www.tdi.texas.gov Self-labeled by manufacturer Therma-Tru Corporation, Edgerton, OH Glazed Fiberglass Single Door (Smooth Star, Fiber Classic, Classic Craft, Classic Craft Rustic) ASTM E330-02; ASTM E 1886-02; ASTM E 1996-02 Page 2 of 4 DR599 | 0716 Product Identification (Manufacturer Label on Door) - Continued: System Certification Agency Self-labeled by manufacturer Manufacturer’s Name or Code Name Therma-Tru Corporation, Edgerton, OH Glazed Fiberglass Single Door w/ Boxed Sidelite & Combination Reinforced 2 Product Name Mullion (Smooth Star, Fiber Classic, Classic Craft, Classic Craft Rustic) ASTM E330-02; ASTM E 1886-02; Test Standards ASTM E 1996-02 Certification Agency Self-labeled by manufacturer Manufacturer’s Name or Code Name Therma-Tru Corporation, Edgerton, OH Glazed Fiberglass Single Door w/ Boxed Sidelites & Combination Reinforced 3 Product Name Mullion (Smooth Star, Fiber Classic, Classic Craft, Classic Craft Rustic) ASTM E330-02; ASTM E 1886-02; Test Standards ASTM E 1996-02 Certification Agency Self-labeled by manufacturer Manufacturer’s Name or Code Name Therma-Tru Corporation, Edgerton, OH Glazed Fiberglass Double Door 4 Product Name (Smooth Star, Fiber Classic, Classic Craft, Classic Craft Rustic) ASTM E330-02; ASTM E 1886-02; Test Standards ASTM E 1996-02 Certification Agency Self-labeled by manufacturer Manufacturer’s Name or Code Name Therma-Tru Corporation, Edgerton, OH Glazed Fiberglass Double Door, w/ Boxed Sidelites & Combination Mullion 5 Product Name (Smooth Star, Fiber Classic, Classic Craft, Classic Craft Rustic) ASTM E330-02; ASTM E 1886-02; Test Standards ASTM E 1996-02 Impact Resistance: System Impact Resistant 1-5 Glazed Doors & Sidelites Yes Texas Department of Insurance | www.tdi.texas.gov Requirement These products satisfy the Texas Department of Insurance’s criteria for protection from windborne debris in the Inland I and Seaward zone. The assemblies may be installed at any height on the structure as long as the design pressure rating for the assemblies is not exceeded. Page 3 of 4 DR599 | 0716 Acceptance of Smaller Assemblies: Door assemblies with dimensions equal to, or smaller than those specified are acceptable with the limitations specified in this report. Sidelites: Sidelites must only be used with doors. Sidelites must not be installed individually. Installation: System 1-5 Type of Installation Wall Framing Fasteners Fastener Embedment Fastener Location/Spacing For proper installation of doors and sidelites refer to ThermaTru Corporation drawings: TX-4195 Rev 1, TX-4196 Rev 1, TX4197 Rev 1, TX-4198 Rev 1, and TX-4199 Rev 1, dated 7/17/2012, signed and sealed by Lyndon F. Schmidt, P.E. on 7/22/2015. Note: Keep the manufacturer’s installation instructions at the job site during installation. Use corrosion resistant fasteners as specified in the IRC, the IBC, and the Texas Revisions. Texas Department of Insurance | www.tdi.texas.gov Page 4 of 4