Therma Tru Dr599 DR 599, 8 0 Glazed Fiberglass Impact Resistant Doors, Inswing & Outswing, Singles Doubles With And Without User Manual

User Manual: Therma Tru Dr599 dr599 TDI approval data buildingcodes traderesources

Open the PDF directly: View PDF .
Page Count: 4

Product Evaluation

DR599 | 0716 Engineering Services Program

Texas Department of Insurance | 333 Guadalupe Street | Austin, Texas 78714 | (800) 248-6032 | www.tdi.texas.gov | @TexasTDI

The following product has been evaluated for compliance with the wind loads specified in the International

Residential Code (IRC) and the International Building Code (IBC).

This product evaluation is not an endorsement of this product or a recommendation that this product be used.

The Texas Department of Insurance has not authorized the use of any information contained in the product

evaluation for advertising, or other commercial or promotional purpose.

This product evaluation is intended for use by those individuals who are following the design wind load criteria in

Chapter 3 of the IRC and Section 1609 of the IBC. The design loads determined for the building or structure shall

not exceed the design load rating specified for the products shown in the limitations section of this product

evaluation. This product evaluation does not relieve a Texas licensed engineer of his responsibilities as outlined

in the Texas Insurance Code, the Texas Administrative Code, and the Texas Engineering Practice Act.

For more information, contact TDI Engineering Services Program at (800) 248-6032.

Evaluation ID: DR-599 Effective Date: July 1, 2016

Re-evaluation Date: July 2020

Product Name: 8"- 0" Glazed Fiberglass Impact Resistant Doors, Inswing & Outswing, Singles & Doubles

with and without Impact Resistant Sidelites

Manufacturer: Therma-Tru Corporation

118 Industrial Drive

Edgerton, OH 43517

(419) 298-1740

General Description:

System

Description

Label

Rating

Drawing

Number

1

3'-0" x 8'-0" Glazed Fiberglass

Single Door Inswing/Outswing (X)

Inswing +50/-50 psf

Outswing +50/-50 psf

TX-4195

Rev 1

2

3'-0" x 8'-0" Glazed Fiberglass

Single Door w/ Boxed Sidelite & Combination

Reinforced Mullion Inswing/Outswing (XO), (OX)

Inswing +47/-47 psf

Outswing +47/-47 psf

TX-4196

Rev 1

3

3'-0" x 8'-0" Glazed Fiberglass

Single Door w/ Boxed Sidelites & Combination

Reinforced Mullion Inswing/Outswing (OXO)

Inswing +47/-47 psf

Outswing +47/-47 psf

TX-4197

Rev 1

4

6'-0" x 8'-0" Glazed Fiberglass Double Door,

Inswing/Outswing (XX)

Inswing +50/-50 psf

Outswing +50/-50 psf

TX-4198

Rev 1

5

6'-0" x 8'-0" Glazed Fiberglass Double Door, w/

Boxed Sidelites & Combination Mullion

Inswing/Outswing (OXXO)

Inswing +50/-50 psf

Outswing +50/-50 psf

TX-4199

Rev 1

DR599 | 0716

Texas Department of Insurance | www.tdi.texas.gov Page 2 of 4

Dimensions:

System

Overall Size

Door

Panel Size

Sidelite

Panel Size

Max Daylight Opening

size

1

Inswing: 37-3/4" x 98"

Outswing: 37-3/4" x 96-3/4"

36" x 95-1/4"

NA

Door: 21" x 78-3/4"

Sidelite: NA

2

Inswing: 76-3/4" x 98"

Outswing: 76-3/4" x 96-3/4"

36" x 95-1/4"

36" x 95-1/4"

Door: 21" x 78-3/4"

Sidelite: 21" x 78-3/4"

3

Inswing: 115-3/4" x 98”

Outswing: 115-3/4" x 96-3/4"

36" x 95-1/4"

36" x 95-1/4"

Door: 21" x 78-3/4"

Sidelite: 21" x 78-3/4"

4

Inswing: 74-1/2" x 98”

Outswing: 74-1/2" x 96-3/4"

36" x 95-1/4"

36-3/4" x 95-1/4"

(with astragal)

NA

Door: 21" x 78-3/4"

Sidelite: NA

5

Inswing: 151" x 98”

Outswing: 151" x 96-3/4"

36" x 95-1/4"

36-3/4" x 95-1/4"

(with astragal)

36" x 95-1/4"

Door: 21" x 78-3/4"

Sidelite: 21" x 78-3/4"

Hardware Description and Installation:

System

Component

Quantity

Attachment Method

1-5

4" Butt Hinges

4

For proper installation of

Hardware and components refer

to Therma-Tru Corporation

Drawings: TX-4195 Rev 1, TX-4196

Rev 1, TX-4197 Rev 1, TX-4198

Rev 1, and TX-4199 Rev 1, dated

7/17/2012, signed and sealed by

Lyndon F. Schmidt, P.E. on

7/22/2015.

Lock and deadbolt strike plate

1 per lockset and

deadbolt

Kwikset 200 Series Lock

and

Kwikset 780 Series Deadbolt

1 each

Product Identification (Manufacturer Label on Door):

System

1

Certification Agency

Self-labeled by manufacturer

Manufacturer’s Name or Code Name

Therma-Tru Corporation, Edgerton, OH

Product Name

Glazed Fiberglass Single Door

(Smooth Star, Fiber Classic, Classic Craft, Classic

Craft Rustic)

Test Standards

ASTM E330-02; ASTM E 1886-02;

ASTM E 1996-02

DR599 | 0716

Texas Department of Insurance | www.tdi.texas.gov Page 3 of 4

Product Identification (Manufacturer Label on Door) - Continued:

System

2

Certification Agency

Self-labeled by manufacturer

Manufacturer’s Name or Code Name

Therma-Tru Corporation, Edgerton, OH

Product Name

Glazed Fiberglass Single Door

w/ Boxed Sidelite & Combination Reinforced

Mullion

(Smooth Star, Fiber Classic, Classic Craft, Classic

Craft Rustic)

Test Standards

ASTM E330-02; ASTM E 1886-02;

ASTM E 1996-02

3

Certification Agency

Self-labeled by manufacturer

Manufacturer’s Name or Code Name

Therma-Tru Corporation, Edgerton, OH

Product Name

Glazed Fiberglass Single Door

w/ Boxed Sidelites & Combination Reinforced

Mullion

(Smooth Star, Fiber Classic, Classic Craft, Classic

Craft Rustic)

Test Standards

ASTM E330-02; ASTM E 1886-02;

ASTM E 1996-02

4

Certification Agency

Self-labeled by manufacturer

Manufacturer’s Name or Code Name

Therma-Tru Corporation, Edgerton, OH

Product Name

Glazed Fiberglass Double Door

(Smooth Star, Fiber Classic, Classic Craft, Classic

Craft Rustic)

Test Standards

ASTM E330-02; ASTM E 1886-02;

ASTM E 1996-02

5

Certification Agency

Self-labeled by manufacturer

Manufacturer’s Name or Code Name

Therma-Tru Corporation, Edgerton, OH

Product Name

Glazed Fiberglass Double Door, w/ Boxed

Sidelites & Combination Mullion

(Smooth Star, Fiber Classic, Classic Craft, Classic

Craft Rustic)

Test Standards

ASTM E330-02; ASTM E 1886-02;

ASTM E 1996-02

Impact Resistance:

System

Impact Resistant

Requirement

1-5

Glazed

Doors &

Sidelites

Yes

These products satisfy the Texas Department of Insurance’s

criteria for protection from windborne debris in the Inland I and

Seaward zone. The assemblies may be installed at any height on

the structure as long as the design pressure rating for the

assemblies is not exceeded.

DR599 | 0716

Texas Department of Insurance | www.tdi.texas.gov Page 4 of 4

Acceptance of Smaller Assemblies: Door assemblies with dimensions equal to, or smaller than those

specified are acceptable with the limitations specified in this report.

Sidelites: Sidelites must only be used with doors. Sidelites must not be installed individually.

Installation:

System

1-5

Type of Installation

For proper installation of doors and sidelites refer to Therma-

Tru Corporation drawings: TX-4195 Rev 1, TX-4196 Rev 1, TX-

4197 Rev 1, TX-4198 Rev 1, and TX-4199 Rev 1, dated

7/17/2012, signed and sealed by Lyndon F. Schmidt, P.E. on

7/22/2015.

Wall Framing

Fasteners

Fastener Embedment

Fastener

Location/Spacing

Note: Keep the manufacturer’s installation instructions at the job site during installation. Use corrosion

resistant fasteners as specified in the IRC, the IBC, and the Texas Revisions.