Therma Tru Msds Topcoat User Manual

User Manual: Therma Tru Msds Topcoat MSDS_Topcoat Original Stain - 2000-2008 Hand Applied Finish Safety Data Sheet manuals technical-manuals customer-support

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Conforms to ANSI Z400.1-2004 Standard (United States, Canada).

Material Safety Data Sheet
Therma-Tru Finishing Kit Topcoat

1.

Product and company identification

Common name
Code
Material uses
Supplier/Manufacturer

In case of emergency

2.

: Therma-Tru Finishing Kit Topcoat
: MATT24TOP, MATTGTOP, MATT12LO, MATT12NO, MATT12EW, MATT12CD,
MATT12CH, MATT12WL, MATT12AW, MATT12MP, MAFSPAK
: Not available.
: Therma-Tru Corporation
108 Mutzfeld Road
Butler, IN, 46721
: CHEMTREC, U.S. : (800) 424-9300 International: (703) 527-3887

Hazards identification

Physical state
Odor
Color
Hazard status

:
:
:
:

Emergency overview

Liquid. [Colloidial.]
Ammoniacal. [Slight]
White.
This material is classified hazardous under OSHA regulations in the United States and the
WHMIS Controlled Product Regulation in Canada.
: WARNING !
CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. CONTAINS MATERIAL
THAT CAN CAUSE TARGET ORGAN DAMAGE. BIRTH DEFECT HAZARD CONTAINS MATERIAL WHICH CAN CAUSE BIRTH DEFECTS.
Avoid exposure - obtain special instructions before use. Do not breathe vapor or mist.
Avoid contact with eyes, skin and clothing. Contains material that can cause target organ
damage. Contains material which can cause birth defects. Avoid exposure during
pregnancy. Use only with adequate ventilation. Keep container tightly closed and sealed
until ready for use. Wash thoroughly after handling.

Potential acute health effects
Eyes
: Irritating to eyes.
Skin
: Irritating to skin.
Inhalation
: Irritating to respiratory system. Exposure to decomposition products may cause a health
hazard. Serious effects may be delayed following exposure.
: No known significant effects or critical hazards.
Ingestion
Potential chronic health
: CARCINOGENIC EFFECTS: Classified A3 (Proven for animals.) by ACGIH [2effects
Butoxyethanol]. Classified 3 (Not classifiable for humans.) by IARC [2-Butoxyethanol].
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
Medical conditions
aggravated by overexposure

: Pre-existing disorders involving any target organs mentioned in this MSDS as being at risk
may be aggravated by over-exposure to this product.

See toxicological information (section 11)

Date of issue

: 05/30/2007

Page: 1/8

Therma-Tru Finishing Kit Topcoat

3.

Composition/information on ingredients
United States

Name

CAS number

N-Methyl-2-pyrrolidone
Dipropylene glycol methyl ether
3-Butoxypropan-2-ol

872-50-4
34590-94-8
5131-66-8

%
1-5
1-5
1-5

Canada
Name

CAS number

N-Methyl-2-pyrrolidone
Dipropylene glycol methyl ether
3-Butoxypropan-2-ol

872-50-4
34590-94-8
5131-66-8

4.

%
1-5
1-5
1-5

First aid measures

Eye contact

: Check for and remove any contact lenses. In case of contact with eyes, rinse
immediately with plenty of water. Get medical attention if symptoms occur.

Skin contact

: Wash with soap and water. Get medical attention if symptoms occur.

Inhalation

: If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical
attention if symptoms appear.
: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms appear.
: No specific antidote. Medical staff must contact Poison Control Center.

Ingestion
Notes to physician

5.

Fire-fighting measures

Flammability of the product
Products of combustion

Extinguishing media
Suitable
Not suitable
Special exposure hazards

Special protective
equipment for fire-fighters

6.

: May be combustible at high temperature.
: Decomposition products may include the following materials:
carbon oxides
nitrogen oxides
: Use an extinguishing agent suitable for the surrounding fire.
: None known.
: Promptly isolate the scene by removing all persons from the vicinity of the incident if there
is a fire. No action shall be taken involving any personal risk or without suitable training.
In a fire or if heated, a pressure increase will occur and the container may burst.
: Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Accidental release measures

Personal precautions

: No action shall be taken involving any personal risk or without suitable training. Evacuate
surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not
touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate
ventilation. Wear appropriate respirator when ventilation is inadequate. Put on
appropriate personal protective equipment (see section 8).

Environmental precautions

: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).

Date of issue

: 05/30/2007

Page: 2/8

Therma-Tru Finishing Kit Topcoat
Methods for cleaning up

7.

: Stop leak if without risk. Move containers from spill area. Approach release from upwind.
Prevent entry into sewers, water courses, basements or confined areas. Wash spillages
into an effluent treatment plant or proceed as follows. Contain and collect spillage with
non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
and place in container for disposal according to local regulations (see section 13).
Dispose of via a licensed waste disposal contractor. Contaminated absorbent material
may pose the same hazard as the spilled product. Note: see section 1 for emergency
contact information and section 13 for waste disposal.

Handling and storage

Handling

: Put on appropriate personal protective equipment (see section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Avoid exposure during pregnancy. Do not get in eyes or on skin or clothing. Do not
breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear
appropriate respirator when ventilation is inadequate. Keep in the original container or an
approved alternative made from a compatible material, kept tightly closed when not in
use. Empty containers retain product residue and can be hazardous. Do not reuse
container.

Storage

: Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see section 10) and food and drink. Keep container tightly closed and sealed until ready
for use. Containers that have been opened must be carefully resealed and kept upright
to prevent leakage. Do not store in unlabeled containers. Use appropriate containment
to avoid environmental contamination.

8.

Exposure controls/personal protection
United States

Product name
N-Methyl-2-pyrrolidone
Dipropylene glycol methyl ether

Exposure limits
AIHA WEEL (United States, 1/2006). Skin
TWA: 10 ppm 8 hour(s).
ACGIH TLV (United States, 1/2006). Skin
STEL: 909 mg/m³ 15 minute(s).
STEL: 150 ppm 15 minute(s).
TWA: 606 mg/m³ 8 hour(s).
TWA: 100 ppm 8 hour(s).
NIOSH REL (United States, 12/2001). Skin
STEL: 900 mg/m³ 15 minute(s).
STEL: 150 ppm 15 minute(s).
TWA: 600 mg/m³ 10 hour(s).
TWA: 100 ppm 10 hour(s).
OSHA PEL (United States, 11/2006). Skin
TWA: 600 mg/m³ 8 hour(s).
TWA: 100 ppm 8 hour(s).

Canada
Product name
Dipropylene glycol methyl ether

Date of issue

: 05/30/2007

Exposure limits
ACGIH TLV (United States, 1/2006). Skin
STEL: 909 mg/m³ 15 minute(s).
STEL: 150 ppm 15 minute(s).
TWA: 606 mg/m³ 8 hour(s).
TWA: 100 ppm 8 hour(s).

Page: 3/8

Therma-Tru Finishing Kit Topcoat
Engineering measures

Eyes
Skin
Respiratory
Hands

: Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor or
mist, use process enclosures, local exhaust ventilation or other engineering controls to
keep worker exposure to airborne contaminants below any recommended or statutory
limits.
:
:
:
:

Safety glasses.
Lab coat.
A respirator is not needed under normal and intended conditions of use.
Natural rubber (latex).

HMIS Code/Personal
: B
protective equipment
Personal protection in case : Safety glasses, goggles or face shield. Impervious gloves. Full suit. Boots. Wear NIOSHof a large spill
approved self-contained breathing apparatus or equivalent and full protective gear.
Hygiene measures
: Wash hands, forearms and face thoroughly after handling compounds and before eating,
smoking and using the lavatory and at the end of the day. Follow good industrial hygiene
practice.

9.

Physical and chemical properties

Physical state
Color
Odor
pH
Boiling/condensation point
Relative density
Vapor pressure
Vapor density
Solubility

:
:
:
:
:
:
:
:
:

Liquid. [Colloidial.]
White.
Ammoniacal. [Slight]
8
100°C (212°F)
1.05
0.13 kPa (1 mm Hg)
1 [Air = 1]
Easily soluble in the following materials: cold water and hot water.

10 . Stability and reactivity
Stability and reactivity
Incompatibility with various
substances
Hazardous decomposition
products
Hazardous polymerization
Conditions of reactivity

Date of issue

: The product is stable.
: Reactive or incompatible with the following materials: oxidizing materials, acids and
alkalis.
: Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
: Will not occur.
: Slightly flammable in the presence of the following materials or conditions: open flames,
sparks and static discharge and heat.

: 05/30/2007

Page: 4/8

Therma-Tru Finishing Kit Topcoat

11 . Toxicological information
Toxicity data
Product/ingredient name
N-Methyl-2-pyrrolidone

Test / Route
LD50 Dermal
LD50 Intraperitoneal
LD50 Intravenous
LD50 Oral
LD50 Subcutaneous
LD50 Unreported
LD50 Oral
LD50 Oral
LD50 Dermal
LD50 Oral

Dipropylene glycol methyl ether
3-Butoxypropan-2-ol
Acute Effects
Eyes
Skin
Inhalation
Ingestion
Potential chronic health
effects
Target organs

Species
Rabbit
Rat
Rat
Rat
Rat
Rat
Rat
Rat
Rabbit
Rat

Result
8 g/kg
2472 mg/kg
80500 ug/kg
3914 mg/kg
>2 g/kg
7 g/kg
5.5 ml/kg
5400 uL/kg
3100 mg/kg
5660 uL/kg

: Irritating to eyes.
: Irritating to skin.
: Irritating to respiratory system. Exposure to decomposition products may cause a health
hazard. Serious effects may be delayed following exposure.
: No known significant effects or critical hazards.
: CARCINOGENIC EFFECTS: Classified A3 (Proven for animals.) by ACGIH [2Butoxyethanol]. Classified 3 (Not classifiable for humans.) by IARC [2-Butoxyethanol].
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
: Contains material which causes damage to the following organs: upper respiratory tract,
central nervous system (CNS), eye, lens or cornea.

12 . Ecological information
Environmental precautions
Products of degradation

: No known significant effects or critical hazards.
: Products of degradation: carbon oxides (CO, CO2) and water, nitrogen oxides (NO, NO2
etc.).

13 . Disposal considerations
Waste disposal

: The generation of waste should be avoided or minimized wherever possible. Dispose of
surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of
this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any regional
local authority requirements. Avoid dispersal of spilled material and runoff and contact
with soil, waterways, drains and sewers.

14 . Transport information
Regulatory information
UN/ IMDG/ IATA DOT/ TDG : Not regulated.

Date of issue

: 05/30/2007

Page: 5/8

Therma-Tru Finishing Kit Topcoat

15 . Regulatory information
United States
HCS Classification
U.S. Federal regulations

: Irritating material
Target organ effects
: TSCA 4(a) final test rules: Dipropylene glycol methyl ether
TSCA 8(a) PAIR: Dipropylene glycol methyl ether
United States inventory (TSCA 8b): Not determined.
TSCA 8(d) H and S data reporting: 3-Butoxypropan-2-ol: 1994
TSCA 12(b) one-time export: Dipropylene glycol methyl ether
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: N-Methyl-2-pyrrolidone; Dipropylene
glycol methyl ether
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: NMethyl-2-pyrrolidone: Fire hazard, Immediate (acute) health hazard, Delayed (chronic)
health hazard; Dipropylene glycol methyl ether: Fire hazard, Immediate (acute) health
hazard
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: Sodium hydroxide
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.

SARA 313
Form R - Reporting
requirements
Supplier notification

Product name
: N-Methyl-2-pyrrolidone

CAS number
872-50-4

: N-Methyl-2-pyrrolidone

872-50-4

Concentration
1-5
1-5

SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall
include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.
State regulations
: Connecticut Carcinogen Reporting: None of the components are listed.
Connecticut Hazardous Material Survey: None of the components are listed.
Florida substances: None of the components are listed.
Illinois Chemical Safety Act: None of the components are listed.
Illinois Toxic Substances Disclosure to Employee Act: None of the components are
listed.
Louisiana Reporting: None of the components are listed.
Louisiana Spill: None of the components are listed.
Massachusetts Spill: None of the components are listed.
Massachusetts Substances: The following components are listed: N-Methyl-2pyrrolidone
Michigan Critical Material: None of the components are listed.
Minnesota Hazardous Substances: None of the components are listed.
New Jersey Hazardous Substances: None of the components are listed.
New Jersey Spill: None of the components are listed.
New Jersey Toxic Catastrophe Prevention Act: None of the components are listed.
New York Acutely Hazardous Substances: None of the components are listed.
New York Toxic Chemical Release Reporting: None of the components are listed.
Pennsylvania RTK Hazardous Substances: The following components are listed: NMethyl-2-pyrrolidone
Rhode Island Hazardous Substances: None of the components are listed.

Date of issue

: 05/30/2007

Page: 6/8

Therma-Tru Finishing Kit Topcoat
WARNING: This product contains a chemical known to the State of California to cause
birth defects or other reproductive harm.
Ingredient name

Cancer

Reproductive

No significant risk
level

N-Methyl-2-pyrrolidone

No.

Yes.

No.

Canada
WHMIS (Canada)

Maximum
acceptable dosage
level
3200 μg/day
(inhalation)

: Class D-2B: Material causing other toxic effects (Toxic).

Canada inventory

: Canada inventory: Not determined.
CEPA Toxic substances: None of the components are listed.
Canadian ARET: None of the components are listed.
Canadian NPRI: The following components are listed: NMethyl-2-pyrrolidone
Alberta Designated Substances: None of the components are
listed.
Ontario Designated Substances: None of the components
are listed.
Quebec Designated Substances: None of the components
are listed.

This product has been classified in accordance with the hazard criteria of the Canadian CPR and the United States
OSHA. This MSDS contains all the information required by the CPR and OSHA, the American National Standard
Institute (ANSI) Z400.1.
International lists

: This product, (and its ingredients) is (are) listed on national inventories, or is (are)
exempted from being listed, in Australia (AICS), in Europe (EINECS/ELINCS), in Korea
(TCCL), in Japan (METI), in the Philippines (RA6969).

16 . Other information
Label requirements (U.S.A.)

: CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. CONTAINS MATERIAL
THAT CAN CAUSE TARGET ORGAN DAMAGE. BIRTH DEFECT HAZARD CONTAINS MATERIAL WHICH CAN CAUSE BIRTH DEFECTS.

Hazardous Material
Information System (U.S.A.)

:

National Fire Protection
Association (U.S.A.)

HAZARD RATINGS

HMIS RATING
*

Health

1

Fire hazard

1

Physical Hazard

0

Personal protection

B

:

Flammability

1
Health

1

4- Extreme
3- Serious
2- Moderate
1- Slight
0- Minimal
See section 8 for more detailed
information on personal protection.

0

Reactivity
Special

Date of issue

: 05/30/2007

Page: 7/8

Therma-Tru Finishing Kit Topcoat
References

: ANSI Z400.1, MSDS Standard, 2004. - Manufacturer's Material Safety Data Sheet. 29CFR Part1910.1200 OSHA MSDS Requirements. - 49CFR Table List of Hazardous
Materials, UN#, Proper Shipping Names, PG. - Canada Gazette Part II, Vol. 122, No. 2.
Registration SOR/88-64, 31 December 1987. Hazardous Products Act "Ingredient
Disclosure List" - Canadian Transport of Dangerous Goods, Regulations and Schedules,
Clear Language version 2005.

Date of issue
Date of previous issue
Version

: 05/30/2007
: 03/30/2007
: 1.1

Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named
supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material is the sole responsibility of the user.
All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist.

Date of issue

: 05/30/2007

Page: 8/8