Therma Tru Msds Topcoat User Manual

User Manual: Therma Tru Msds Topcoat MSDS_Topcoat Original Stain - 2000-2008 Hand Applied Finish Safety Data Sheet manuals technical-manuals customer-support

Open the PDF directly: View PDF .
Page Count: 8

Therma-Tru Finishing Kit Topcoat

Material Safety Data Sheet

Product and company identification1 .

Common name Therma-Tru Finishing Kit Topcoat

MATT24TOP, MATTGTOP, MATT12LO, MATT12NO, MATT12EW, MATT12CD,

MATT12CH, MATT12WL, MATT12AW, MATT12MP, MAFSPAK

Not available.Material uses

Code

In case of emergency

:

:

:

:

Supplier/Manufacturer :

CHEMTREC, U.S. : (800) 424-9300 International: (703) 527-3887

Conforms to ANSI Z400.1-2004 Standard (United States, Canada).

Therma-Tru Corporation

108 Mutzfeld Road

Butler, IN, 46721

Hazards identification

Potential acute health effects

Irritating to respiratory system. Exposure to decomposition products may cause a health

hazard. Serious effects may be delayed following exposure.

Irritating to eyes.

No known significant effects or critical hazards.

Irritating to skin.

Eyes

Skin

Inhalation

Ingestion

Physical state Liquid. [Colloidial.]

See toxicological information (section 11)

:

:

:

:

:

Medical conditions

aggravated by over-

exposure

Pre-existing disorders involving any target organs mentioned in this MSDS as being at risk

may be aggravated by over-exposure to this product.

:

Odor : Ammoniacal. [Slight]

2 .

Emergency overview :WARNING !

CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. CONTAINS MATERIAL

THAT CAN CAUSE TARGET ORGAN DAMAGE. BIRTH DEFECT HAZARD -

CONTAINS MATERIAL WHICH CAN CAUSE BIRTH DEFECTS.

Avoid exposure - obtain special instructions before use. Do not breathe vapor or mist.

Avoid contact with eyes, skin and clothing. Contains material that can cause target organ

damage. Contains material which can cause birth defects. Avoid exposure during

pregnancy. Use only with adequate ventilation. Keep container tightly closed and sealed

until ready for use. Wash thoroughly after handling.

Potential chronic health

effects

CARCINOGENIC EFFECTS: Classified A3 (Proven for animals.) by ACGIH [2-

Butoxyethanol]. Classified 3 (Not classifiable for humans.) by IARC [2-Butoxyethanol].

MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available.

:

Color : White.

This material is classified hazardous under OSHA regulations in the United States and the

WHMIS Controlled Product Regulation in Canada.

Hazard status :

Date of issue :05/30/2007 Page: 1/8

Therma-Tru Finishing Kit Topcoat

Composition/information on ingredients

N-Methyl-2-pyrrolidone 872-50-4 1 - 5

Dipropylene glycol methyl ether 34590-94-8 1 - 5

3-Butoxypropan-2-ol 5131-66-8 1 - 5

Name CAS number %

Canada

3 .

%Name CAS number

United States

N-Methyl-2-pyrrolidone 872-50-4 1 - 5

Dipropylene glycol methyl ether 34590-94-8 1 - 5

3-Butoxypropan-2-ol 5131-66-8 1 - 5

First aid measures4 .

Eye contact

Skin contact

Inhalation

Ingestion

Notes to physician

:

:

:

:

:No specific antidote. Medical staff must contact Poison Control Center.

Check for and remove any contact lenses. In case of contact with eyes, rinse

immediately with plenty of water. Get medical attention if symptoms occur.

Do not induce vomiting. Never give anything by mouth to an unconscious person. Get

medical attention if symptoms appear.

If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical

attention if symptoms appear.

Wash with soap and water. Get medical attention if symptoms occur.

May be combustible at high temperature.

Decomposition products may include the following materials:

carbon oxides

nitrogen oxides

Use an extinguishing agent suitable for the surrounding fire.

Fire-fighting measures

Flammability of the product

Products of combustion

Extinguishing media

Promptly isolate the scene by removing all persons from the vicinity of the incident if there

is a fire. No action shall be taken involving any personal risk or without suitable training.

In a fire or if heated, a pressure increase will occur and the container may burst.

Special protective

equipment for fire-fighters

Fire-fighters should wear appropriate protective equipment and self-contained breathing

apparatus (SCBA) with a full face-piece operated in positive pressure mode.

:

:

:

5 .

Special exposure hazards :

None known.

Suitable :

Not suitable :

No action shall be taken involving any personal risk or without suitable training. Evacuate

surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not

touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate

ventilation. Wear appropriate respirator when ventilation is inadequate. Put on

appropriate personal protective equipment (see section 8).

Environmental precautions

Accidental release measures

:Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and

sewers. Inform the relevant authorities if the product has caused environmental pollution

(sewers, waterways, soil or air).

Personal precautions :

6 .

Date of issue :05/30/2007 Page: 2/8

Therma-Tru Finishing Kit Topcoat

Stop leak if without risk. Move containers from spill area. Approach release from upwind.

Prevent entry into sewers, water courses, basements or confined areas. Wash spillages

into an effluent treatment plant or proceed as follows. Contain and collect spillage with

non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth

and place in container for disposal according to local regulations (see section 13).

Dispose of via a licensed waste disposal contractor. Contaminated absorbent material

may pose the same hazard as the spilled product. Note: see section 1 for emergency

contact information and section 13 for waste disposal.

Methods for cleaning up :

Store in accordance with local regulations. Store in original container protected from

direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials

(see section 10) and food and drink. Keep container tightly closed and sealed until ready

for use. Containers that have been opened must be carefully resealed and kept upright

to prevent leakage. Do not store in unlabeled containers. Use appropriate containment

to avoid environmental contamination.

Put on appropriate personal protective equipment (see section 8). Eating, drinking and

smoking should be prohibited in areas where this material is handled, stored and

processed. Workers should wash hands and face before eating, drinking and smoking.

Avoid exposure during pregnancy. Do not get in eyes or on skin or clothing. Do not

breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear

appropriate respirator when ventilation is inadequate. Keep in the original container or an

approved alternative made from a compatible material, kept tightly closed when not in

use. Empty containers retain product residue and can be hazardous. Do not reuse

container.

Handling and storage

Handling

Storage

:

:

7 .

N-Methyl-2-pyrrolidone AIHA WEEL (United States, 1/2006). Skin

TWA: 10 ppm 8 hour(s).

Dipropylene glycol methyl ether ACGIH TLV (United States, 1/2006). Skin

STEL: 909 mg/m³ 15 minute(s).

STEL: 150 ppm 15 minute(s).

TWA: 606 mg/m³ 8 hour(s).

TWA: 100 ppm 8 hour(s).

NIOSH REL (United States, 12/2001). Skin

STEL: 900 mg/m³ 15 minute(s).

STEL: 150 ppm 15 minute(s).

TWA: 600 mg/m³ 10 hour(s).

TWA: 100 ppm 10 hour(s).

OSHA PEL (United States, 11/2006). Skin

TWA: 600 mg/m³ 8 hour(s).

TWA: 100 ppm 8 hour(s).

Exposure controls/personal protection

Product name Exposure limits

Dipropylene glycol methyl ether ACGIH TLV (United States, 1/2006). Skin

STEL: 909 mg/m³ 15 minute(s).

STEL: 150 ppm 15 minute(s).

TWA: 606 mg/m³ 8 hour(s).

TWA: 100 ppm 8 hour(s).

United States

Canada

8 .

Product name Exposure limits

Date of issue :05/30/2007 Page: 3/8

Therma-Tru Finishing Kit Topcoat

Engineering measures : Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor or

mist, use process enclosures, local exhaust ventilation or other engineering controls to

keep worker exposure to airborne contaminants below any recommended or statutory

limits.

Hygiene measures :

Personal protection in case

of a large spill

:Safety glasses, goggles or face shield. Impervious gloves. Full suit. Boots. Wear NIOSH-

approved self-contained breathing apparatus or equivalent and full protective gear.

Wash hands, forearms and face thoroughly after handling compounds and before eating,

smoking and using the lavatory and at the end of the day. Follow good industrial hygiene

practice.

HMIS Code/Personal

protective equipment

:B

Natural rubber (latex).

A respirator is not needed under normal and intended conditions of use.

Lab coat.

Safety glasses.Eyes

:

Skin

Respiratory

:

:

:

Hands

100°C (212°F)

Liquid. [Colloidial.]

8

1.05

1 [Air = 1]

0.13 kPa (1 mm Hg)

Ammoniacal. [Slight]

White.

Boiling/condensation point

Physical and chemical properties

Physical state

pH

Relative density

Vapor pressure

Vapor density

Odor

Color

:

:

:

:

:

:

:

:

9 .

Easily soluble in the following materials: cold water and hot water.Solubility :

The product is stable.

Reactive or incompatible with the following materials: oxidizing materials, acids and

alkalis.

Will not occur.

Under normal conditions of storage and use, hazardous decomposition products should

not be produced.

Stability and reactivity

Stability and reactivity

Incompatibility with various

substances

Hazardous decomposition

products

Hazardous polymerization

:

:

:

:

10 .

Slightly flammable in the presence of the following materials or conditions: open flames,

sparks and static discharge and heat.

Conditions of reactivity :

Date of issue :05/30/2007 Page: 4/8

Therma-Tru Finishing Kit Topcoat

Toxicological information11 .

Eyes : Irritating to eyes.

Skin : Irritating to skin.

Inhalation : Irritating to respiratory system. Exposure to decomposition products may cause a health

hazard. Serious effects may be delayed following exposure.

Ingestion :No known significant effects or critical hazards.

Acute Effects

Potential chronic health

effects

:CARCINOGENIC EFFECTS: Classified A3 (Proven for animals.) by ACGIH [2-

Butoxyethanol]. Classified 3 (Not classifiable for humans.) by IARC [2-Butoxyethanol].

MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available.

Target organs :Contains material which causes damage to the following organs: upper respiratory tract,

central nervous system (CNS), eye, lens or cornea.

Toxicity data

Product/ingredient name Test / Route ResultSpecies

N-Methyl-2-pyrrolidone LD50 Dermal Rabbit 8 g/kg

LD50 Intraperitoneal Rat 2472 mg/kg

LD50 Intravenous Rat 80500 ug/kg

LD50 Oral Rat 3914 mg/kg

LD50 Subcutaneous Rat >2 g/kg

LD50 Unreported Rat 7 g/kg

Dipropylene glycol methyl ether LD50 Oral Rat 5.5 ml/kg

LD50 Oral Rat 5400 uL/kg

3-Butoxypropan-2-ol LD50 Dermal Rabbit 3100 mg/kg

LD50 Oral Rat 5660 uL/kg

Products of degradation: carbon oxides (CO, CO2) and water, nitrogen oxides (NO, NO2

etc.).

Ecological information

Products of degradation :

Environmental precautions : No known significant effects or critical hazards.

12 .

The generation of waste should be avoided or minimized wherever possible. Dispose of

surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of

this product, solutions and any by-products should at all times comply with the

requirements of environmental protection and waste disposal legislation and any regional

local authority requirements. Avoid dispersal of spilled material and runoff and contact

with soil, waterways, drains and sewers.

Waste disposal

Disposal considerations

:

13 .

Transport information14 .

IATA :DOT/ TDGIMDG/ Not regulated.

Regulatory information

UN/

Date of issue :05/30/2007 Page: 5/8

Therma-Tru Finishing Kit Topcoat

Regulatory information

Clean Water Act (CWA) 307: No products were found.

Clean Water Act (CWA) 311: Sodium hydroxide

Clean Air Act (CAA) 112 accidental release prevention: No products were found.

Clean Air Act (CAA) 112 regulated flammable substances: No products were found.

Clean Air Act (CAA) 112 regulated toxic substances: No products were found.

SARA 302/304/311/312 extremely hazardous substances: No products were found.

SARA 302/304 emergency planning and notification: No products were found.

SARA 302/304/311/312 hazardous chemicals: N-Methyl-2-pyrrolidone; Dipropylene

glycol methyl ether

SARA 311/312 MSDS distribution - chemical inventory - hazard identification: N-

Methyl-2-pyrrolidone: Fire hazard, Immediate (acute) health hazard, Delayed (chronic)

health hazard; Dipropylene glycol methyl ether: Fire hazard, Immediate (acute) health

hazard

SARA 313

United States

Product name CAS number Concentration

SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall

include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.

15 .

N-Methyl-2-pyrrolidone 872-50-4 1 - 5

N-Methyl-2-pyrrolidone 872-50-4 1 - 5

Form R - Reporting

requirements

Supplier notification

:

:

HCS Classification Irritating material

Target organ effects

U.S. Federal regulations TSCA 4(a) final test rules: Dipropylene glycol methyl ether

TSCA 8(a) PAIR: Dipropylene glycol methyl ether

United States inventory (TSCA 8b): Not determined.

TSCA 8(d) H and S data reporting: 3-Butoxypropan-2-ol: 1994

TSCA 12(b) one-time export: Dipropylene glycol methyl ether

:

:

State regulations Connecticut Carcinogen Reporting: None of the components are listed.

Connecticut Hazardous Material Survey: None of the components are listed.

Florida substances: None of the components are listed.

Illinois Chemical Safety Act: None of the components are listed.

Illinois Toxic Substances Disclosure to Employee Act: None of the components are

listed.

Louisiana Reporting: None of the components are listed.

Louisiana Spill: None of the components are listed.

Massachusetts Spill: None of the components are listed.

Massachusetts Substances: The following components are listed: N-Methyl-2-

pyrrolidone

Michigan Critical Material: None of the components are listed.

Minnesota Hazardous Substances: None of the components are listed.

New Jersey Hazardous Substances: None of the components are listed.

New Jersey Spill: None of the components are listed.

New Jersey Toxic Catastrophe Prevention Act: None of the components are listed.

New York Acutely Hazardous Substances: None of the components are listed.

New York Toxic Chemical Release Reporting: None of the components are listed.

Pennsylvania RTK Hazardous Substances: The following components are listed: N-

Methyl-2-pyrrolidone

Rhode Island Hazardous Substances: None of the components are listed.

:

Date of issue :05/30/2007 Page: 6/8

Therma-Tru Finishing Kit Topcoat

WARNING: This product contains a chemical known to the State of California to cause

birth defects or other reproductive harm.

International lists :

Canada

N-Methyl-2-pyrrolidone No. Yes. No. 3200 μg/day

(inhalation)

Ingredient name Cancer Reproductive No significant risk

level

Maximum

acceptable dosage

level

WHMIS (Canada)

CEPA Toxic substances: None of the components are listed.

Canadian ARET: None of the components are listed.

Canadian NPRI: The following components are listed: N-

Methyl-2-pyrrolidone

Alberta Designated Substances: None of the components are

listed.

Ontario Designated Substances: None of the components

are listed.

Quebec Designated Substances: None of the components

are listed.

Class D-2B: Material causing other toxic effects (Toxic).:

This product, (and its ingredients) is (are) listed on national inventories, or is (are)

exempted from being listed, in Australia (AICS), in Europe (EINECS/ELINCS), in Korea

(TCCL), in Japan (METI), in the Philippines (RA6969).

This product has been classified in accordance with the hazard criteria of the Canadian CPR and the United States

OSHA. This MSDS contains all the information required by the CPR and OSHA, the American National Standard

Institute (ANSI) Z400.1.

Canada inventory Canada inventory: Not determined.:

Other information

Hazardous Material

Information System (U.S.A.)

National Fire Protection

Association (U.S.A.)

Health

Special

Reactivity

Flammability

CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. CONTAINS MATERIAL

THAT CAN CAUSE TARGET ORGAN DAMAGE. BIRTH DEFECT HAZARD -

CONTAINS MATERIAL WHICH CAN CAUSE BIRTH DEFECTS.

Label requirements (U.S.A.) :

:

:

16 .

0

1

1

4- Extreme

3- Serious

2- Moderate

1- Slight

0- Minimal

See section 8 for more detailed

information on personal protection.

HAZARD RATINGS

HMIS RATING

Physical Hazard

Health * 1

1

Fire hazard

Personal protection B

0

Date of issue :05/30/2007 Page: 7/8

Therma-Tru Finishing Kit Topcoat

ReferencesReferences

Date of issue

Date of previous issue

Version :

:

:

:

05/30/2007

03/30/2007

1.1

:ANSI Z400.1, MSDS Standard, 2004. - Manufacturer's Material Safety Data Sheet. -

29CFR Part1910.1200 OSHA MSDS Requirements. - 49CFR Table List of Hazardous

Materials, UN#, Proper Shipping Names, PG. - Canada Gazette Part II, Vol. 122, No. 2.

Registration SOR/88-64, 31 December 1987. Hazardous Products Act "Ingredient

Disclosure List" - Canadian Transport of Dangerous Goods, Regulations and Schedules,

Clear Language version 2005.

Notice to reader

To the best of our knowledge, the information contained herein is accurate. However, neither the above named

supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the

information contained herein. Final determination of suitability of any material is the sole responsibility of the user.

All materials may present unknown hazards and should be used with caution. Although certain hazards are

described herein, we cannot guarantee that these are the only hazards that exist.

Date of issue :05/30/2007 Page: 8/8