Third Millennium Systems AV00 Access Control Reader, Model AV00 User Manual Users manual
Third Millennium Systems Ltd. Access Control Reader, Model AV00 Users manual
Users manual
3M Inline style or technology - now you can have both MANUAL Product Features Designed to embrace cutting-edge RFID technologies in a stylish and innovative package, this advanced access control reader offers a refreshing breakthrough in the access security marketplace. Shaped in a sleek mullion style design, the reader may be mounted to most plain wall finishes. This powerfully secure and innovative reader has a beautifully clean aesthetic, and a bright RGB LED that can be applied to many applications such as colour coded access levels, migration status or mood lighting. The reader housing is moulded using tough polycarbonate plastic, and includes a shadow-line backplate, a subtle and simple mechanical design feature that makes the reader, when fixed, appear to float against the wall. • 125KHz • Bluetooth LE • • • • • • • Black textured moulding Slim profile RGB LED Fully encapsulated electronics Wide range of output formats 5 year limited warranty Read range up to 10cm (4 inches) Proximity Images shown in this document are for illustrative purposes only. The features, colours, style and appearance may change without notice. © 3millID 100-02635-A 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 www.3millid.com +1 303 475 4972 sales@3millid.com 3M Inline style or technology - now you can have both MANUAL CONTENTS SECTION TITLE 1. Parts List 2. Specification 3. Installation Guide 3millID acknowledges all copyrights and registered trademarks used by third parties. No affiliation is implied, or should be inferred, to the use of any tradename or reference to copyright material. Any reference to copyright material or registered trademarks within this document is used purely to depict or identify such material for the purpose of comment, description or comparison, and to assist in the evaluation of products or services described herein. UTJ-AV00 No part of this publication may be reproduced or translated into other languages or transmitted into a language used by data processing machines without the express written consent of 3millID. E&OE We do our best to provide accurate and reliable information at the time of publication, but due to continuous developments we cannot be held responsible for clerical errors, omissions or outdated information, and we reserve the right to amend, alter or withdraw such information, without notice. PAGE These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. These devices contains: FCC ID: TCZ-10103751G1 EQUIPMENT ******* These RFID proximity readers comply with the essential requirements and relevant provisions of: EU Directive 2014/53/EC Together with information provided by suppliers and subcontractors, these devices comply with the requirements and relevant provisions of: EU Directive 2011/65/EC Images shown in this document are for illustrative purposes only. The features, colours, style and appearance may change without notice. © 3millID 100-02635-A This symbol on the product or on its packaging indicates that the product must not be disposed of with normal household waste. Instead, it is your responsibility to dispose of your waste equipment by arranging to return it to a designated collection point for the recycling of waste electrical and electronic equipment. By separating and recycling your waste equipment at the time of disposal you will help to conserve natural resources and ensure that the equipment is recycled in a manner that protects human health and the environment. EU Directive 2012/19/EC 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 www.3millid.com +1 303 475 4972 sales@3millid.com 3M Inline 1. 2. MANUAL parts list 1 x reader MODULE 1 x reader BACKPLATE 1 x 3 x 10mm black cross-head securing screw + 66 - 35 specification up to 5yrs 10cm performance level for access control This product complies with the following UL294 Access Control Performance Levels: Destructive Attack Level I Line Security Level I Endurance Level IV Standby Power Level I See the UL Listed access control unit controller installation instructions for reader compatibility. UL Ref. Number ?????? environmental Operating Temperature Humidity Ingress Protection -35°C to +66°C 85 ±5% at 30 ±2°C IP65 Positioning Suitable for INDOOR and OUTDOOR use. electrical Power supply Current 35mA typical Data Voltage Rest >4Vdc / Active <1Vdc Data Output Wiegand, Clock & Data, Custom Outputs Indication 1 RGB LED Sounder Integral speaker dimensions 96mm x 52mm x 21mm (3.8 x 2.1 x 0.8 inches) polymeric materials Potting compound Mouldings UL R/C (QMFZ2) UL746C wiring Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction. Recommended cable BELDEN 953x (or equivalent UL listed) - Wiegand BELDEN 9502 (or equivalent UL listed) - RS485 All cable and wiring must be Listed and suitable for use. Cable length must not exceed 30 metres maximum (98.5 feet) for UL not less than 26 AWG (0.24mm²) Cable length Minimum permissible wire size connections Screw terminal 52mm 2.1 inches (All readers in this series use this terminal connection) 10 100-02635-A 21mm 0.8 inch 96mm 3.8 inches Power is to be provided by a UL294 Listed, low-voltage Class 2 power limited supply or control panel, capable of 4 hours standby. +10Vdc to +16Vdc Voltage © 3millID (-31°F to + 151°F) (86 ±3°F) (not evaluated by UL) 0V +Vdc DATA1/CLK DATA0/DAT GREEN RED Buzzer TMPR/CP RS485RS485+ Supply voltage ground Supply voltage (+10Vdc to +16Vdc) Wiegand or Clock/Data output Wiegand or Clock/Data output Green LED control input Red LED control input Buzzer control input Tamper or Card Present output RS485 Bus RS485 Bus 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 www.3millid.com +1 303 475 4972 sales@3millid.com 3M Inline MANUAL 3. installation guide Remove module securement screw. Lever bottom edge of reader module away from the backplate, and lift up. Backplate FIXING TEMPLATE. If printed full scale, you may use the drawing below as a fixing template. MEASURE and CHECK DIMENSIONS before use. Fix reader BACKPLATE to a plain surface finish, using suitable screw fixings having a diameter no greater than 0.15 in. (4mm). Mounting this reader on (or near) metal may impair the read range of the unit. 2.7 in. (65mm) 1.9 in. (49mm) Once the backplate is secured, make wire connections to the reader, in accordance with the screw terminal connections shown on Page 3 of this document and your control panel requirements. Ensure the cable does not impair or 0.5 in. (13mm) prevent the reader module being secured. Fasten the reader module, ensuring the top-edge fixing lugs engage correctly with the recesses at the top of the backplate. Swing the bottom edge of the module down and forward until you feel the unit ‘snap’ shut. 1.4 in. (34.4mm) Secure the module to the backplate using the M3x10mm screw supplied. If required, you may opt to use a security screw to the sizes shown here. Following installation, it is recommended the access control system and control units are subjected to a maintenance and operational test procedure. TEST COMPLETE SYSTEM AT LEAST ONCE A YEAR © 3millID 100-02635-A 3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129 www.3millid.com +1 303 475 4972 sales@3millid.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : Yes Create Date : 2016:12:05 10:57:19Z Creator : (Xara.com) Modify Date : 2016:12:05 10:57:19Z Producer : (Xara.com) PDF export 8,0,0,6 Page Mode : UseNone Page Count : 4 PDF Version : 1.4EXIF Metadata provided by EXIF.tools