Thomson 2-7673A 2.4 GHz Single-Line Cordless Telephone User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	268446
Application ID	ZBzZ2O+HYD4D4F24m74ZYA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	186.85kB (2335681 bits)
Date Submitted	2002-09-06 00:00:00
Date Available	2002-09-05 00:00:00
Creation Date	2017-12-24 12:46:57
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-24 12:46:57
Document Title	users manual
Document Creator	C:SCANDALLSCANDALL.EXE

ATLINKS USA/27673XXX-A
FCC ID: G9H2-7673A
Marstech Report No. 22217D
MARSTE CH LIMITED
EXHIBIT A
[FCC Ref. 2.1033(b)(3)]
"Installation and Operating Instructions
Furnished to the User"
Exhibit A(I) - User‘s Guide
EXHIBIT A
27673
40-Channel 2.4 GHz Caller ID
Digital CordlessTeIephone
User’s Guide
FCC ID: G9H2-7673A
Marstcch Report No. 222171)
EXHIBIT A(I)
Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with
parts 15 and 68, FCC Rules and Regulations and theTechnicaI Requirements lorTelephoneTerminal Equipment published
by ACTA.
1 Notification to the LocalTeIephone Company
On the bottom of this equipment is a label indicating, among other information, the US number and Ringer
Equivalence Number lRENl forthe equipment.Vou must, upon request, provide this information to your telephone
company.
The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these
devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected
to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN,
you should contact your local telephone company.
Notes
- This equipment may not be used on coin service provided by the telephone company.
- Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are
on a party line. Check with your local telephone company.
- Notice must be given to the telephone company upon permanent disconnection of yourtelephone from your line.
2 Rights of theTelephone Company
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,
where practicable, notify you that temporary discontinuance of service may be required,Where prior notice is not
practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service
immediately. In case of such temporary discontinuance, the telephone company must: ill promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a
complaint to the Commission pursuant to procedures set forth in Subpart E of Fan 88, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations or procedures where
such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these
changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you
adequate notice, in writing, to allow you to maintain uninterrupted service.
I TERFERENCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation IS subject to the following two conditions: (1lThis device may not
cause harmful interlerence; and (ZlThis device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, it not installed and used in accordance with the
instructions, may cause harmful interference to radio communications, However. there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, whidi can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna (that is, the antenna for radio ortelevision that is "receiving" the interference).
0 Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna,
0 Connect the telecommunicatiuns equipment into an outlet on a circuit different from that to whidt the receiving antenna is
connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television
technician for additional suggestions, Also, the Federal Communications Commission has prepared a heIpIul booklet,
”HowTo Identify and Resolve Radio/TV Interference Problems." This booklet is available from the US. Government Printing
0ffice,Washington, DC. 20402. Please specify stock number 004-000-00345-4 when ordering copies.
HEARING AID COMPATIBILITY
This telephone system meets FCC standards for Hearing Aid Compatibility.
TABLE OF CONTENTS
EQUIPMENT APPROVAL INFORMATION
INTERFERENCE INFORMATION ..
HEARING AID COMPATIBILITY
INTRODUCTION ..
INSTALLATION AND ETUP
MODULAR JACK REQUIREMENTS
DIGITAL SECURITY SVSTEM
DESKTOP INSTALLATION
SET UP .....................
SETTING THE DISPLAY LANGUAGE ......
SETTING THE LOCAL AREA CODE (LAC)
SETTING THE REGIONAL AREA CODE (RAC)
SETTING THE RINGERTONE ........
SETTING THEVOICE MAIL NUMBER
SETTING THE INFORMATION SERVICES
LDCDCOWQNQG’OUINNN
NUMBER.... . 10
SETTING THE DEFAULT . . 10
TELEPHONE OPERATION 11
RECEIVING A CALL
MAKING A CALL.
AUTO STANDBV .
PRE-DIALING
DELETING THE PRE-DIAL NUMBER
DIALING
ADJUSTING THE ANDSET OLUME
REDIAL ..................................
FLASH ..............
CHANNEL BU'I'I'ON .
HOLD ..
EXIT ..
FINDING THE HANDSET
WARNING:TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSETHIS PRODUCT TO
RAIN OR MOISTURE.
HANDSET RINGER VOLUME SWITCH 14
MUTE .................
VOICE MESSAGING .
Low BATTERY WARNING .
CALLER ID FEATURES ........
CALLER ID WITH CALL WAITING
RECEIVING AND STORING CALLS
DELETING RECORDS .............
DELETING THE CURRENT RECORD .
DELETING ALL RECORDS
DIALING A CALLER ID NUMBER
CHANGING THE NUMBER FORMAT
CALL WAITING DELUXE
CID 2.0/2.5 SWITCH .I
MEMORY ........................................
STORING A NAME AND NUMBER IN
MEMORv ..
INSERTING A PAUSE IN THE DIALING
SEQUENCE
CHANGING A STORED NUMBER.
DIALING A STORED NUMBER . ..
CHAIN DIALING FROM MEMORv ............ 20
REVIEWING AND DELETING STORED
NUMBERS .
msummuumsu uuwnnmsnucmsmmr lRiExcuMAIIIm
mnwuwmu ELEMIcancx,L-unnvmnvs mwvwnmnm
wwmwmuum anmammuuuw ImANELEISA
ISAWARNWE sIsR svaEEAsIEnmswsme Am WARNING sum
AIEAlInEvnuur
‘nANuERm/s
vaAEE' msm m
vRumlET
ssmuwcmwufliusimci AIznwsm-I nr
renown IMPDI'ANY
wsTRuchNs
Amwmmn ms
Mum/u
SEE MARKING DN BOTTOM [BACK OF FRDDUCI
CLASS SERVICES KEY OPERATION .
VOICE MA|L (VOICE MAIL) ..
REPEAT DIAL (REPEAT DIAL) u 4
AUTOMATIC REDIAL (AUTO REDIAL) ......
3-WAY CONFERENCE (FLASH/3-WAY/
EXIT) ............
CANCEL CALL WAITING .
CHANGING THE BATI’EHV
BATTERY SAFETY PRECAUTIONS
MESSAGE |NDICATORS ................
TROUBLEsnoonNG TIPS .
CALLER ID
TELEPHONE ..
CAusEs OF POOR R
GENERAL PRODUCT CARE ..
SERVICE
|NDEX ..
ACCESSORV RDER FORM .
LIMITED WARRANTV ......
327
.28
.29
INTRODUCTION
This telephone has been designed to be simple to use, however, you can
reach its full potential more quickly by taking a few minutes to read this
User’s Guide.This telephone is a multifunction product for use with the
Call Waiting and Caller ID services available from your local telephone
company.
Your Caller ID Call Waiting phone allows you to:
View the name and telephone number of a caller (CallWaiting Caller ID).
Identify callers before you answer the phone.
View the time and date of each incoming call.
Record up to 50 Caller ID messages sequentially.
Know who called while you are on the other line when you were away.
Screen unwanted calls, eliminate harassment from annoying calls, or to
get prepared before answering a call.
IMPORTANT: Because cordless phones operate on electricity, you should
have at least one phone in your home that isn’t cordless, in case the power in
your home goes out.
IMPORTANT: In order to use all of the features of this telephone, you must
subscribe to two separate services available from your local telephone
company: the standard Name/Number Caller ID Service to know who is
calling when the phone rings and Caller ID with Call Waiting Service to know
who is calling while you are on the phone.
INSTALLATION AND SETUP
Make sure your package includes the items shown here.
Missing belt clip
and battery
Dictures
Handset Power supply Telephone line cord
MODULAR JACK REQUIREMENTS .
You need an RJ11 type modular phone jack, which is the most 9;
common type of phone jack and might look like the one E1]
pictured here. If you don’t have a modularjack, call your local
phone company to find out how to get one installed. —
INSTALLATION NOTE: Some cordless telephones operate at frequencies
that may cause interference to nearby TVs, microwave ovens, and VCRs. To
minimize or prevent such interference, the base of the cordless telephone
should not be placed near or on top ofa TV, microwave oven, or VCR. If such
interference continues, move the cordless telephone farther away from these
appliances. Certain other communications devices may also use the 2.4 GHZ
frequency for communication, and, if not properly set, these devices may
interfere with each other and/or your new telephone. If you are concerned
with interference, please refer to the owner’s manual for these devices on how
to properly set channels to avoid interference. Typical devices that may use the
2.4 GHz frequency for communication include wireless audio/video senders,
wireless computer networks, multi—handset cordless telephone systems, and
some long—range cordless telephone systems.
DIGITAL SECURITY SYSTEM
Your cordless phone uses a digital security system to provide protection
against false ringing, unauthorized access, and charges to your phone line.
When you place the handset in the base, the unit verifies its security code.
After a power outage or battery replacement, you should place the
handset in the base for about 20 seconds to reset the code.
. Remove the battery compartment door on the handset, insert the battery
pack, plug the cord into the jack (inside the compartment), and replace
the compartment door.
2. Set the RINGER switch (on the handset) to ON, and place handset in the
cradle on the base.
3. Plug the power supply into the power jack on the back of base and the
other end into an electrical outlet.The “charge” indicator comes on
verifying the battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don't
properly charge the phone, battery performance will be compromised.
4. Plug the telephone line cord into theTEL LlNE jack on the back of the
base and into a modular phone jack.
NOTE : The phone automatically defaults to touch—tone dialing. To change to
pulse (rotary) dialing, see “Tone/Pulse Dialing.” Ifyou don’t know which type
of service you have, check with the phone company.
CAUTION: Use only the ATLINKS USA, Inc. 5-85—31- power supply
A that is compatible with this unit. Using other power supplies may
damage the unit.
SET UP
Page button VOICE MAIL button
7-10-11 REDIAL
REPEAT DIAL button PAUSE button
INFO button AUTO REDIAL
button
Arrow down button
Arrow up button
MUTE / PROG button
HOLD button
TALK button
CHANNEL button FLASH / 3-WAY/
EXIT button
MEMORY button CAN CEL/ CALL WAITING button
CHARGE indicator
There are seven programmable menus available: Language, Local Area
Code, Regional Area Code, RingerTone, Voice Mail no., Info service no.,
and Default.
SETTING THE DISPLAY LANGUAGE
1. Make sure the phone is OFF.
2. Press the MUTE/FROG button. 1 = ENGLISH 2 = FHA 3 = ESP shows in
the display.
3. Press the eiBfl-eview-iup or down arrow) button or the 1, 2, or 3
number key.
4. Select the desired language.
5. Press the MUTE/FROG button to confirm.
NOTE: The language setting on the handset should match the language
setting on the base,
SETTING THE LOCAL AREA CODE (LAC)
For proper Caller ID operation, you must enter your local area code.
1. Make sure the phone is OFF (not in talk mode).
2. Press ”MUTE/FROG" until [SET LOCAL AREA CODE] shows on the display.
3. Enter your 3 digit area code using the number keys.
4. Press "MUTE/FROG" button to confirm.
SETTING THE REGIONAL AREA CODE (RAC)
You may enter multiple Regional Area Codes to assist the dial back feature
for 10-digit caller lD records.
1. Make sure the phone is OFF (not in talk mode).
2. Press “MUTE/FROG” until [SET REGIONAL AREA CODE - 1] shows on
the display.
3. Press the up or down arrow button to select the desired location (1-6) to
store your regional area code.
4. Enter your 3 digits area code using the number keys.
5. Press ”MUTE/FROG” button to confirm.
SETTING THE RINGER TONE
1. Make sure the phone is OFF (not in talk mode).
2. Press “MUTE/FROG" until [SET HINGEFl TONE] shows on the display.
3. Press the up or down arrow button or the 1, 2, or 3 number key to select
the desired ringer tone.
4. Press “MUTE/FROG” button to confirm.
SETTING THE VOICE MAIL NUMBER
1. Make sure the phone is OFF (not in talk mode).
2. Press "MUTE/FROG" until [SET VOICE MAIL #] shows on the display.The
corresponding voice mail number shows in the display if the number
has been programmed.
3. Use the number keys to enter your voice mail service number
(maximum 20 digits).
4. Press "MUTE/FROG" button to confirm.
SETTING THE INFORMATION SERVICES NUMBER
1. Make sure the phone is OFF (not in talk mode).
2. Press ”MUTE/PROG" until [SET INFO SVCS #] shows on the display, The
corresponding information service number shows in the display if the
number has been set (Default is 411).
3. Use the number keys to enter the information service number of the
telephone company (maximum 11 digits).
4. Press ”MUTE/FROG" button to confirm.
SETTING THE DEFAULT
1. Make sure the phone is OFF. 1NO 2YES
2. Press the MUTE/FROG button until DEFAULT SETTING fi‘ES-Efieshows
in the display.
3. Press the Gl'B-review-(up or down arrow) button or the 1 or 2 number
key to select.
4. Press MUTE/FROG button to confirm.
10
TELEPHONE OPERATION
VOICE MAIL button
REPEAT/ DIAL button
display
7-10411/REDIAL/PAUSE
INFO button
button
AUTO REDIAL button
Arrow down button Arrow up button
MUTE/FROG b“"°“ HOLD/DELETE button
TALK button
CHANNEL button FIASH / 3-WAY/ EXIT button
MEMORY button CANCEL CALL WAITING button
RECEIVING A CALL
1. Check the display to see who is calling.
2. Press theTALK on the handset to answer a call.
3. Press theTALK on the handset to hang up.
MAKING A CALL
To make a call, press theTALK button before you dial and pressTALK again
to hang up.
AUTO STANDBY
While the handset is on, place it in the base and it will automatically hang up.
PRE-DIALING
1. Make sure the phone is OFF.
2. Enter the telephone number you wish to call.The telephone number
shows in the handset display.
3. Press the TALK button on the handset.The telephone number and
TALK shows in the hand - display.
NOTE: You may enter up to 7' pre—dial digits.
DELETING THE PRE-DIAL NUMBER
0 While entering the telephone number in pre-dialing mode, press
DELETE button to delete the phone number.
DIALING
1. Press theTALK button on the handset. TALK shows on the handset
and display.
2. Enter the telephone number.The telephone number, channel, time, and
volume level shows on the handset display.
ADJUSTING THE HANDSET VOLUME
1. Make sure the phone is ON (handset is in use).
2. Press the up / down arrow button on the handset to select the desire
volume Ievel.The volume level will be shown on the display.
REDIAL
1. Make sure the phone is turned ON.
2. PressTALK on the handset.
3. Press the 7~10~11/REDIAL/PAUSE button to redial the last number you
dialed (up to 32 digits).
12
FLASH
Use the FLASH/3 WAY/EXIT button to activate custom calling services such
as call waiting or call transfer, which are available through your local
phone company.
on't use the TALK button to activate custom callin rvices such as call
g, or you’ll hang up the phone.
CHANNEL BUTTON
While talking, you might need to manually change the channel in order to
get rid of static. Press and release the CHANNEL button to switch to the
next clear channel.
HOLD
Press the hold button to put a call on hold.The handset antenna indicator
flashes.To release a line on hold, press the hold button again or pick up an
extension phone.
EXIT
Press the EXIT button to cancel any command you initiated.
FINDING THE HANDSET
This feature helps to locate a misplaced handset.
Press and release the PAGE button on base. PA %shows on the handset
display, and the handset beeps until you press an? utton on handset or
press the PAGE button on base. Otherwise, the handset will beeps
continuously about 2 minutes.
NOTE: You can still page the handset with the finger off.
13
HANDSET RINGER VOLUME SWITCH
The RINGER switch must be ON for the handset to ring during incoming calls.
MUTE
To prevent the person you are speaking to from hearing you while on a call,
press the mute buttonIThe telephone number you dialed, MUTE, the timer,
and volume level shows in either display. Press mute again to cancel.
VOICE MESSAGING
Provided your phone company offers voice messaging service and you
subscribe to it, the voice mail indicator on the base will flash to indicate
there is a message waiting. The indicator will stop flashing after the
message has been reviewed.
Low BATTERY WARNING
If the battery is low, a warning tone will sound from the handset when in
TALK mode. LOW BATTERY, the selected channel, the timer, and volume
level shows in the display.
CALLER ID FEATURES
_—____
This unit receives and displays information transmitted by your local
phone company.This information can include the phone number, date, and
time; or the name, phone number, date, and time.The unit can store up to
50 calls for later review.
Time Date Number of calls
: /'El °§“._..'
l-:lll‘_',l:i:l:-l tjju
_l 0.1 4.0- Cu: "n
5111 I TH JDHH
ELIE'i‘ L'lJNF TL'l UM FLS HLD DEEP
Caller 1D phone
number
Caller ID name
14
CALLER ID WITH CALL WAITING
Provided you subscribe to Caller ID with CallWaiting service from your
phone company, you are able to see who is calling when you hear the call
waiting beep.The caller identification information appears in the display
after you hear the tone.
- Press the FLASH/3 WAY button to put the current person on hold so that
you can answer the incoming call.
VERY IMPORTANT: The Caller ID feature of this product requires a
subscription to Caller ID service from your telephone company.
RECEIVING AND STORING CALLS
When you receive a call, the information is transmitted by the phone
company to your Caller lDTeIephone between the first and second ring.
When the memory is full, a new call automatically replaces the oldest call
in memory. NEW appears in the display for calls received that have not
been reviewed.
NOTE: Check with your local phone company regarding name service
availability.
IMPORTANT: You cannot receive Call Waiting Caller ID records while using
the conference features.
DELETING RECORDS
Use the HOLD/DELETE button to erase the record currently shown in the
display or all records.
NOTE: Deleting Caller ID records on the handset and base is done separately.
15
DELETING THE CURRENT RECORD
1. Make sure the phone if OFF
2. Use the elB-revic-w-lup or down arrow) button to find the record you want
to delete. MEMGllfi Means-MW
3. While the record IS displayed, press the HOLD/DELETE button. HEM,
te-lephenembeflnel DELETE? shows in the display.
4. Press the HOLD/DELETE button again to delete the call record. DELETED
shows in the display.
DELETING ALL RECORDS
1. Make sure the phone is OFF.
2. Use the Gl-Bfl-eriew-lup or down arrow) button to find the record you want
to delete. WWW-drapin-
3. Press and hold the HOLD/DELETE button. Malcolm
and DELETE ALL? shows in the display.
4. Press HOLD/DELETE button again to erase all records. BEL-EFEBA'L-L-
shows in the display. N0 Cans
DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF.
2. Use the eta-review-(up or down arrow) button to scroll to the desired
Caller ID record.
3. Press theTALK button on the handset.
CHANGING THE NUMBER FORMAT
The 7-10—11/REDIAL/PAUSE button lets you change the format of the
displayed number.The available formats are as follows.
16
7-digit 7—digit telephone number.
10-digit 3-digit area code + 7-digit telephone number.
11-digit long distance code ”‘I " + 3-digit area code + 7-digit telephone
number.
1. Use the Gl-B-rev'rew-tup or down arrow) button to scroll to the number
you want to call back.
2. Ifthe number will not dial as shown, press the 7-10—11/REDlAL/PAUSE
button. Repeat if necessary, until the correct number of digits are shown.
3. Press the TALK button on the handset.
NOTE: If you find it necessary to dial all local calls with the area codes
included, press the program/flash button on the base until SETAREA CODE
shows on the display. Then press delete/ redial to erase the area code‘ The
display shows “— — -."
CALL WAITING DELUXE
If you do not press the ” FLASH ” button or any other buttons within 10
seconds to answer the call waiting, the menu appears in the display and
you may select the function you prefer.
BUSY — Press to connect the waiting party with a specified announcement
provided by the telephone company and remain connected to your current
phone call.
CONF — Press to connect the waiting party to the existing conversion ifl-a
Sweat-h
T0 VM - Press to forward the waiting party to a voice mail account
provided by the telephone company while you remain connected to your
current phone call.
17
PLS HOLD — Press to connect the waiting party to a hold announcement
provided by the telephone company.
DROP — Press to disconnect your current call and accept the waiting call.
CID 2.0/2.5 SWITCH
There is a CaIIWaitingType selection switch on the back of the unit. When
the telephone company provides Call Waiting Type 2.5 service, you may set
the switch toType 2.5 position to activate the 2.5 ACTION buttons.
MEMORY
You may store up to twenty 24-digit numbers in memory for quick dialing.
The memory locations for the base and handset are separate, with 10
locations for each. This memow feature is in addition to the 40 Caller ID
records that can be stored in memory.
STORING A NAME AND NUMBER IN MEMORY
The phone must be OFF when you store names and numbers in memory.
1. Press the MEMORY button. MEMO # and MEMORY shows in the
display.
2. Press the desired memory location (0 through 9) or use the Gl-B-review
(up or down arrow) button to find the stored memory. For example,
select memory location 1 by pressing the 1 number key.
3. Press the MEMORY button.The display shows ENTER NAME.
4. Use the number keys on the handset to enter the name (up to 15
characters) and press the memory button to save. More than one letter
is stored in each of the number keys. For example, to enter the name
Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times
for the letter |. Press the 5 key 3 times for the letter L and wait for the
18
flashing cursor to automatically move to the next position. Press the 5
key 3 times for the second letter L, and wait 3 seconds for the flashing
cursor to automatically move to the next position. Press the 7 key 4
times for the letter 8; press the 6 key once for the letter M; press the 4
key 3 times for the letter I; press the 8 key for the letterT; press the 4
key twice for the letter H.
NOTE: The cursor will automatically move to the next position if another
number key is pressed.
6. Press the MEMORY button to save the name. The display shows
MEMO# and ENTER TEL HUM-BER! NUMBR
7. Use the number keypad to enter the telephone number you want to
store (up to 24 digits).
8. Press MEMORY button again to store the number.You will hear ‘eNlong
confirmation tone.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the 7-10-11/REDIAL/PAUSE button to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a
dial tone (for example after you dial 9 for an outside line, or to wait for a
computer access tone). Each pause counts as 1 digit in the dialing sequence.
CHANGING A STORED NUMBER
Use the same procedure to change a stored number as you do to store a
name and number in memory—you’re just replacing the phone number
with a different one.
19
DIALING A STORED NUMBER
1. Make sure the phone is ON by pressing theTALK button on the handset.
2, Press the MEMORY button.
3. Press a number (0-9) for the desired memory location.The number
dials automatically,
OR
. Make sure the phone is OFF.
2. Press the memory button.
3. Use the GlB-re-riew-iup or down) button to scroll to the desired memory
location.
4. Press the TALK button on the handset.
CHAIN DIALING FROM MEMORY
Use this feature to make calls which require a sequence of numbers such
as using a calling card for a frequently called long distance number.
Basically, you dial each part of the sequence from memory.The following
example shows how you can use chain dialing to make a call through a
long distance service:
_|
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is ON.
2. Press memory and then press 7.
3. When you hear the access tone, press memory and then press 8.
4. At the next access tone, press memory and then 9.
TIP: Wait for the access tones before pressing the next memory button, or
your call might not go through.
20
REVIEWING AND DELETING STORED NUMBERS
1. Make sure the phone is OFF.
2, Press the MEMORY button.
3. Use the GlB-refiew-lup or down) arrow button to scroll through the
numbers stored in memory until the desired number is shown. For
example, press the number 1 key if the number is stored in memory
location 1. MEMO#, the selected telephone number and name shows in
the display.
4. While the entry is displayed, press HOLD/DELETE to delete the
entry. The display shows MEMO#, the selected telephone number,
and DELETE?
5. Press HOLD/DELETE again to delete the entry. DELETEDshows in the display.
CLASS SERVICES KEY OPERATION
VOICE MAIL (VOICE MAIL)
1. You must program the voice mail service number into the unit before
you can use this button. If no number is entered, the display shows ”NO
NUMBER" on the display.
2. Once you have programmed the voice mail service number, you can call
to the mailbox anytime by pressing the VOICE MAIL button once.The
unit will dial the programmed number automatically.
3. Follow the voice instructions to listen to your voice mail messages.
REPEAT DIAL (REPEAT DIAL)
Repeat Dial is an outgoing CLASS service that allows you to automatically
redial the last outgoing caII.You can request this service anytime after
placing an outgoing call.
The busy/idle status of the calling and called lines are monitored, and
call setup is attempted when both calling and called lines are detected
to be idle.
21
0 Refer to the operation instructions from the service provider.
Press the REPEAT DIAL button to access this function automatically.
AUTOMATIC REDIAL (AUTO REDIAL)
Automatic Redial is a CLASS service that allows you to automatically
return a call to the last incoming caI|.You can request this service anytime
without knowing the calling number.
The busy/idle status of the calling and called lines are monitored, and
call setup is attempted when both calling and called lines are detected
to be idle.
' Refer to the operation instruction from the service provider.
Press AUTO REDIAL button to access this function automatically.
3-WAY CONFERENCE (FLASH / 3-WAY/ EXIT)
1. Call the first party to setup the call.
2. Press FLASH/3 WAY/EXIT button to put the first party on hold.
3. Call the second party.
4. Press FLASH/3 WAY/EXIT button and 3-way conference is established.
CANCEL CALL WAITING
Press CANCEL CALL WAITING button to stop the call waiting service.
22
CHANGING THE BATTERY
Make sure the phone is OFF before you replace the battery.
1. Remove the battery compartment door.
2. Disconnect the cord attached to the battery pack and
remove the battery pack from the handset.
3. Insert the new battery pack and connect the cord into
the jack inside the handset.
4. Put the battery compartment door back on.
5. Place the handset in the base to charge. If you don't
charge the handset battery properly (for 12 hours) when
you first set up the phone and/or when you install a
new battery pack, the battery's long-term performance
will be compromised.
BATTERY SAFETY PRECAUTIONS
- Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
0 To reduce the risk of fire or personal injury, use only the battery listed in
the User’s Guide.
0 Keep batteries out of the reach of children.
0 Remove batteries if storing over 30 days.
0 reduce the risk of fire or personal injury, use only the
battery listed in the instruction book.
23
MESSAGE INDICATORS
“
The following indicators show the status of a message or of the unit.
ERROR
ENTER NAME
DELETE ALL?
DELETE?
END OF LIST
NEW
UNKNOWN
PAGING
BLOCKED
NUMBER
NO DATA
24
Caller information has been interrupted during
transmission or the phone is excessively noisy.
Prompt telling you to enter number in one of the
memory locations.
Prompt asking you if you want to erase all Caller
ID records or memory locations.
Prompt asking you if you want to erase the current Caller
ID record or memory location that is shown on the display.
Indicates that there is no additional information in Caller
ID memory.
Indicates call or calls have not been reviewed.
The incoming call is from an area not serviced by Caller
ID or the information was not sent.
Someone has pressed the PAGE button on the base.
The person is calling from a number that has been
blocked from transmission.
No Caller ID information was received.
TROUBLESHOOTING TIPS
CALLER ID
Problem Solution
No Display ' Is battery fully charged?Try replacing the battery.
' If you are using AC power, make sure that the unit
is connected to a non-switched electrical outlet.
Disconnect the unit from the plug and plug it
in again.
0 Did you order Caller ID service from your local
telephone company?The display won't work
unless you order Caller ID service from your
phone company.
Caller lD Error Message 0 The unit displays this message if it detects anything
other than valid Caller ID information during the
silent period after the first ring.This message
indicates either the presence of noises on the line,
or that an invalid message has been sent from the
telephone company.
TELEPHONE
No dial tone 0 Check installation:
— ls the base power cord connected to a working outlet?
— ls the telephone line cord connected to the base
unit and the wall jack?
- Disconnect the base from the wall jack and connect
another phone to the same jack. If there is no dial tone
in the second phone, the problem might be your
wiring or local service.
0 Is the handset out of range of the base?
0 Make sure the battery is properly charged (12 hours).
- Is the battery pack installed correctly?
0 Did the handset beep when you pressed theTALK
button? Did the CHARGE/ ltN-UGE indicator come on?
The battery may need to be charged.
25
seen-dialect
H HIEF SE . . PFEIE
Handset does not ring
0 Make sure the RlNGER switch on the handset is
turned to ON.
0 You may have too many extension phones on your
Iine.Try unplugging some phones.
0 See solutions for ”No dial tone."
You experience static,
noise, or fading in
and out
' Change channels.
- ls handset out of range? Move closer to the base.
0 Does the base need to be relocated?
0 Charge battery.
- Make sure base is not plugged into an outlet with
another household appliance.
Unit beeps
Memory Dialing
. Place handset in base for a maximum of 20 seconds to
reset the security code. If that doesn’t work, charge
battery for 12 hours.
' Clean charging contacts on handset and base with a
soft cloth, or an eraser.
0 See solutions for ”No dial tone.”
0 Replace battery.
' Did you program the memory location keys correctly?
' Did you follow proper dialing sequence?
.” ¥ElEF SE . . iFElE
F SE . . .
0 Did you reprogram numbers into memory after power
outage or battery replacement?
26
CAUSES OF POOR RECEPTION
' Aluminum siding.
0 Foil backing on insulation.
0 Heating ducts and other metal construction can shield radio signals.
0 You’re too close to appliances such as microwaves, stoves,
computers, etc.
- Atmospheric conditions, such as strong storms.
. Base is installed in the basement or lower floor of the house.
' Base is plugged into an AC outlet with other electronic devices.
0 Baby monitor is using the same frequency.
- Handset battery is low.
. You’re out of range of the base.
GENERAL PRODUCT CARE
To keep your telephone working and looking good, follow these guidelines:
- Avoid putting the phone near heating appliances and devices that
generate electrical noise (for example, motors or fluorescent lamps).
- DO NOT expose to direct sunlight or moisture.
0 Avoid dropping the phone, and other rough treatment to the phone.
- Clean the phone with a soft cloth.
0 Never use a strong cleaning agent or abrasive powder because this will
damage the finish.
0 Retain the original packaging in case you need to ship the phone at a
later date.
0 Periodically clean the charge contacts on the handset and base with a
clean pencil eraser.
27
SERVICE
_—_
This product may be serviced only by the manufacturer or its authorized
service agents. Changes or modifications not expressly approved by
ATLINKS USA, Inc. could void the user’s authority to operate this product.
For instructions on how to obtain service, refer to the warranty included in
this guide or call customer service at 1-800-448-0329.
Or refer inquiries to:
ATLINKS USA, Inc.
Manager, Consumer Relations
P 0 Box 1976
Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference or jot down the
date this product was purchased or received as a gift.This information will
be valuable if service should be required during the warranty period.
Purchase date
Name of store
28
INDEX
——_—_
Symbols
S—WAY Conference (FLASH/3-WAY/
EXIT) 22
Accessory Order Form 31
Adjusting the Handset Volume 12
Auto Standby 11
Automatic Redial (AUTO REDlAL) 22
Battery Safety Precautions 23
CaIIWaiting Deluxe 17
Caller ID 25
Caller ID Features 14
Caller ID with CaIIWaiting 15
Cancel CaIIWaiting 22
Causes of Poor Reception 27
Chain Dialing from Memory 20
Changing a Stored Number 19
Changing the Battery 23
Changing the Number Format 16
Channel Button 13
Class Services Key Operation 21
Deleting All Records 16
Deleting Records 15
Deleting the Current Record 16
Deleting the Pre—Dial Number 12
Desktop Installation 7
Dialing 12
Dialing a Caller ID Number 16
Dialing a Stored Number 20
Digital Security System 6
EquipmentApprovaI Information 2
Exit 13
Finding the Handset 13
Flash 13
General Product Care 27
Handset Ringer Volume Switch 14
Hearing Aid Compatibility 2
Hold 13
Inserting a Pause in the Dialing
Sequence 19
Installation and Setup 6
Interference Information 2
Introduction 5
Limited Warranty 32
Low Battery Warning 14
29
M Setting the Display Language 8
Setting the Information Sen/ices
Making a Call 11 Number 10
Memory 18 Setting the Local Area Code (LAC) 9
Message Indicators 24 Setting the Regional Area Code (RAC) 9
Modular Jack Requirements 6 Setting the RingerTone 9
Mute 14 Setting theVoice Mail Number 10
Storing a Name and Number in
P Memory 18
Pre-Dialing 12 T
R Telephone 25
Telephone Operation 11
Receiving a Call 11 TroubleshootingTips 25
Receiving and Storing Calls 15
Redial 12 V
Repeat Dial (REPEAT DIAL) 21
Reviewing and Deleting Stored Voice Mail (V0|CE MAIL) 21
Numbers 21 Voice Messaging 14
Service 28
Set Up 8
Setting the Default 10
30
, ifft. ,_ 5.55 5325:
n=N 25m 36
,E< $833
mEmz
234“an 5. 5:5“.
23 5.5 6x
EuEEaun 5.5 __ms_
.u=_ 3—5 =E =flm====.
”2 dz. EvazzE cemEofiE wEm>ma wqu
32:53 .m.: z: xumcu 5 555 >wcoE man 58:55 _ ms.
...vmmo_ocm EsoE< 58.
zmsacmzmcaazm
._n_==__ 55.3235“ m 5.7 _s 25 .n_._au==._u
22.3 .>. 5:55 5 EEE Eu 3.5325: =< 5.30 5 new a: ,>_=e 35:3
.m.= =_ 2. 5... x35 5 5.2. 552. 3222; 52. E 5 ES 3.25 a «m; an:
25.5 2 355.2»
E— >_____u 3 3:5 in» n a u_ $55.35... 2: _. Ez— 5153251253
is“ _n= 52: in“. E. 5 5: 25525.» a... so. a 235 E as as an a;
m;
w:
53, mme
..wm__u:m;u‘_ws_ 5qu
(SEE ESE; 032.9 2 Eur...“ so “out“...
Econ—Etc.- tE 1a. k 5.1: an: E?» «T: 22: «Eu can:- cane—n
85965 umNtozS<
DHDu
“3:83 PE 22
Emu 5.3.2 9: cc mEm:
50> m>onm 33:5: 9: 300
5555
gaaaumE 5 E5 5qu
50> E0: SnEac Escuow ”$2qu0 59> >nou
HDHD
“3:96 Emu >E
550 50> Eat 52:5: Encoum 92558 5c> 38
52:0 93 meg“, __m $805 E 2353: 8m 2226;
50> “Em Emv cozmcaxm m: gmnEsc Emu 28sz EwEEou 50>
£3.35; 28 ESE E
5:2 BED $5 32950 a 2.5 $5383 5: 28.828.— __8 52° 8.
455... >._._._.z<==
ENE
mm 52
gums—Es 3.2.5".
325m
35 in
2.23 532. 3
29.5.5wa
50m 5.an wmommmuni
YWMZEQNEOQ 0204
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.1
Linearized                      : No
Page Count                      : 33
Create Date                     : Thu Aug 22 14:44:15 2002.
Producer                        : Pixel Translations (PIXPDF Ver.1.38)
Creator                         : C:SCANDALLSCANDALL.EXE

EXIF Metadata provided by EXIF.tools