Thomson 2-8108AH INTERCOM SPEAKER User Manual USERS MANUAL

Thomson Inc. INTERCOM SPEAKER USERS MANUAL

USERS MANUAL

Model 28108 00023528 (Rev. 0 DOM E) 08-10 Printed in ChinaYour telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company.The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.• This equipment may not be used on coin service provided by the telephone company.• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.101 West 103rd StreetIndianapolis, IN 46290-1102© 2008 Thomson Inc. Trademark(s) ® RegisteredMarca(s) Registrada(s)• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualied installer. Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.Privacy of Communications may not be ensured when using this product.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Ofce, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.Notice: The changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This telephone system meets FCC standards for Hearing Aid Compatibility.Licensed under US Patent 6,427,009.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This intercom speaker is compliant with the DECT 6.0 standard which operates in the 1.92GHz to 1.93GHz frequency range. Installation of this equipment is subject to notication and coordination withUTAM. Any relocation of this equipment must be coordinated through and approved by UTAM. UTAM may be contacted at 1-800-429-8826.Make sure your package includes the items shown here.If one or more GE-28108’s becomes lost, you should de-register all GE-28108’s to ensure proper system operation. Follow the steps below to de-register all GE-28108’s at the same time.1. Disconnect power from the telephone base by pulling the plug out of the back of the unit.2. Press and hold the  button and while holding the page button reconnect the power.3. Continue to hold the  button until the Charge/in use indicator ashes rapidly.4. Release the  button.5. Press and release the  button on the telephone base once. All handsets or the GE-28108 are de-registered and NEEDS REGISTRATION shows in the GE-28108 display.The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu: Set Language, Ring Melodies, Ringer Volume, Key Tone, and Default setting.1. Make sure your phone is  (not in TALK mode).2. Press the  button to go to the main menu.3. Use the  ( 3or 4) button to scroll to  sub-menu.4. Press the  button to enter the menu. SET LANGUAGE 1ENG 2FRA 3ESP shows in the display. The default setting is 1ENG.5. Use the  ( 3or 4) button to scroll to the desired language. 6. Press the  button to save your selection. You will hear a conrmation tone and the selected language shows in the display.You may choose from ten different melodies.1. Use the  ( 3or 4) button to scroll to  sub-menu.2. Press the  button to enter the menu. RING MELODY 01 shows in the display. The default setting is 01.3. Use the  ( 3or 4) button to scroll to the desired setting (01 through 10). You will hear a sample of the ringer melody you select.4. Press the  button to save your selection. You will hear a conrmation tone and the selected melody shows in the display.1. Use the  ( 3or 4) button to scroll to  sub-menu.2. Press the  button to enter the menu. SET RINGER LEVEL 5 shows in the display. The default setting is LEVEL 5.3. Use the  ( 3or 4) button to scroll to your selection.4. Press the  button to save your selection. You will hear a conrmation tone and the new volume setting shows in the display.ringer off1. Use the  ( 3or 4) button to scroll to  sub-menu.2. Press the  button to enter the menu. SET KEY TONE 1ON 2 OFF shows in the display. The default setting is 1ON.3. Use the  ( 3or 4) button to scroll to your selection. 4. Press the  button to conrm and the key tone setting shows in the display.As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.1. Use the  ( 3or 4) button to scroll to  sub-menu. 2. Press the  button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is 2NO.3. Use the  ( 3or 4) button to  or . 4. Press the  button to save your selection. You will hear a conrmation tone. 1. When the phone rings, press the  button on the GE-28108.2. When nished, press the  button again to hang up.341. Press the  button on the GE-28108 rst.2. Dial the number on your handset or telephone base.3. Press  on the handset or telephone base to transfer the call to the GE-28108.4. When nished, press the  button to hang up.1. Initiate the intercom from your handset or telephone base.2. Locate the GE-28108 from your list of registered handsets on your handset or telephone base.3. When the GE-28108 is being paged, it will immediately join the intercom conversation, you can talk to the intercom party freely without pressing any buttons.4. When nished, press the  or  button on the original handset or telephone base to end the intercom call.1. Make sure the GE-28108 is  (not in TALK mode).2. Press the  button on the GE-28108.3. Use the  ( 3or 4) button to select the handset you want to page.4. Wait for the person at the receiving handset to press the  button.NO ANSWER5. When nished, press the  or  button on the GE-28108 to end the intercom call.1. During an external call, press the  button on GE-28108 to conrm. 2. Use the  ( 3or 4) button to scroll to the handset you want to page. 3. Press the  button on GE-2108 to conrm. You will hear a paging tone and PAGING shows in the GE-28108 display.PAGING FROM... 4. When the receiving handset connects, press the  button on the GE-28108 to conference with the receiving handset and the external caller. CONFERENCE shows in the display on the GE-28108 and receiving handset.During an external call, you may transfer the external call to another handset or GE-28108.1. Press the  button on the GE-28108 to conrm.2. Use the  ( 3or 4) button to select Handset # then press the  button on GE-2108 to conrm. You will hear a paging tone. PAGING shows on the GE-28108’s display, and PAGING FROM... shows on the receiving handset’s display.3. When the receiving handset connects, press the  button on the GE-28108 to transfer the call. -OR-4. Press the  button on the GE-28108 to transfer the call. If the receiving handset does not answer within 30 seconds, the GE-28108 rings back and displays CALLBACK. If the GE-28108 does not answer within 20 seconds, the call is automatically dropped.1. Initiate room monitor from your handset or telephone base.2. Locate the GE-28108 from the list of registered handsets on your handset or telephone base.3. The GE-28108 will turn on the microphone and the initiating handset or telephone base will turn on the speakerphone to monitor sound from GE-28108.4. If you receive an incoming call during room monitor mode, the caller ID information will be displayed on GE-28108 and other registered handsets or telephone base, press the  button to quit room monitor mode and answer the incoming call.If trouble is experienced with this equipment, for warranty information, please contact customer service at . If the equipment is causing harm to the telephone network, the telephone company may require that you disconnect the equipment until the problem is resolved.Any unauthorized repairs, changes or modications not expressly approved by Thomson Inc. could void the user’s authority to operate this product. For instructions on how to obtain a replacement unit, refer to the warranty included in this guide or call customer service at .Or refer inquiries to:Attach your sales receipt to this booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period.Purchase Date Name of Store1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the GE-28108.2. Locate the battery compartment on the back of the GE-28108.3. Plug the battery pack cord into the jack inside the compartment.4. Insert the battery pack.5. Close the battery compartment by pushing the door up until it snaps into place.6. Plug the AC power adaptor cord into the power jack on the back of the GE-28108 and the other end into an electrical outlet. The Charge/in use indicator turns on, verifying the battery is charging.7. Allow the GE-28108 to charge (for  hours) prior to rst use.After the optional GE-28108 has charged for 16 hours on the extra charger, NEEDS REGISTRATION1. Press the  button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS SPEAKER MENU shows in the display. (Your GE-28108 should be held near the telephone base during registration process.)2. Press and hold the  button on the telephone base unit until the Charge/in use indicator ashes. Press the GE-28108  button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the GE-28108 display, where X is the GE-28108 number. 1. Press the  ( 3or 4) button to scroll to the DEREGISTRATION sub-menu.2. Press the  button to enter the menu. DEREGISTRATION 1YES 42NO - - - shows in the display. The default setting is "2NO".3. Use the  ( 3or 4) button to scroll to 1YES or 2NO.4. Select , if you do not want to de-register.5. If you select 1YES, press the  button and MOVE NEAR TO BASE displays for 2 seconds, then CONFIRM? 1YES 2NO appears in the display.6. Use the  ( 3or 4) button to scroll to 1YES or 2NO.7. If you select , press the  button to conrm. DE-REGISTER... shows in the display. You will hear a conrmation tone. Then HANDSET X DEREGISTERED shows in the display to conrm the GE-28108 is de-registered.NEEDS REGISTRATION• Defects in materials or workmanship.• One year, from date of purchase. (The warranty period for rental units begins with the rst rental or 45 days from date of shipment to the rental rm, whichever comes rst.)• Provide you with a new unit. The exchange unit is under warranty for the remainder of the original product’s warranty period.• Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials.• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be presented to obtain warranty service.” For rental rms, proof of rst rental is also required. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to:    • Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case of damage or loss.• A new unit will be shipped to you freight prepaid.does not• Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user controls. Any additional information, should be obtained from your dealer.)• Installation and setup service adjustments.• Batteries.• Damage from misuse or neglect.• Products which have been modied or incorporated into other products.• Products purchased or serviced outside the USA.• Acts of nature, such as but not limited to lightning damage.• Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage.  • Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you.• This warranty gives you specic legal rights, and you also may have other rights that vary from state to state.• This warranty does not apply. Contact your dealer for warranty information.To place order, have your Visa, MasterCard, or Discover Card ready and call toll-free .A shipping and handling fee will be charged upon ordering.We are required by law to collect appropriate sales tax for each individual state, country, and locality to which the merchandise is being sent.Items are subject to availability.    

Navigation menu