TiVo Solutions d b a TiVo AG0100 TiVo Wireless G USB Network Adapter User Manual YadaInstructionsOutside ai

TiVo Inc. TiVo Wireless G USB Network Adapter YadaInstructionsOutside ai

Users Manual

If you have not yet set up your TiVo box...If your TiVo box is set up and running...Connecting Your TiVo® Wireless G USB Adapter Check the software versionYou can tell whether you have the correct software version by looking at the Welcome Screen (the first Guided Setup screen):The TiVo Wireless USB Adapter requires TiVo software version 7.2.1 or higher. To check the software version on your TiVo box, go to TiVo Central, select Messages and Setup, then System Information. If the Software Version is 7.2.1 or higher, you can skip to Step .If the Welcome screen looks like this, there are a few extra steps to take. After you follow the instructions on the Start Here poster and complete Guided Setup, continue with Step  to the right.If the Welcome screen looks like this, Guided Setup includes steps for configuring your TiVo Box to work with your Wireless USB Adapter. After Guided Setup, go to TiVo Central, select Messages and Settings, then System Information. If the Software Version is lower than 7.2.1, only perform Step  to the right (to make sure you have the latest software).  Get new softwareTo get new software from the TiVo service:a. From TiVo Central, select Messages & Setup, then Settings, then Phone & Network. b. Select "Connect to the TiVo service now." The connection and download may take some time. c. After the download, check the Phone & Network screen to make sure the last status is "Pending Restart."d. If the last status is not "Pending Restart" go to www.tivo.com/adapters for further instructions.e. Restart the TiVo Box (from TiVo Central, select Messages & Setup, then Restart System).Check out the Troubleshooting chapter in the TiVo Viewer’s Guide for more help with connecting your TiVo DVR, completing Guided Setup, and using the TiVo service. Visit www.tivo.com/support to find Installation Self-Help, Frequently Asked Questions, step-by-step troubleshooting, and to get interactive help from expert users. www.tivo.com/supportCLICKUSB 2.0Plug the USB 2.0 cable (included) into the adapter. Place the adapter on a flat surface in an open area.Open the adapter until it clicks into place. This is the optimum angle for wireless performance.Plug the other end of the USB cable into one of the USB ports on the TiVo box. The power indicator ( ) lights when the cable is connected. Complete the Network Settings From TiVo Central, select Messages & Settings, then Settings, then Phone & Network. Select Change Phone & Network Settings, then Network Settings. The onscreen instructions will help you configure the adapter for your network. You'll need to know your network name and WEP key (if applicable). Connect to a phone lineConnect the TiVo Box to a phone line.The adapter's link indicator ( ) blinks slowly while it searches for your network. Once the adapter is connected, the link indicator stops blinking. During data transmission, the indicator flickers rapidly. If you need help setting up your adapter, visit www.tivo.com/getready.

Navigation menu