TiVo Solutions d b a TiVo AG0100 TiVo Wireless G USB Network Adapter User Manual YadaInstructionsOutside ai
TiVo Inc. TiVo Wireless G USB Network Adapter YadaInstructionsOutside ai
Users Manual
Connecting Your TiVo Wireless G USB Adapter ® CLICK USB 2.0 Open the adapter until it clicks into place. This is the optimum angle for wireless performance. Plug the USB 2.0 cable (included) into the adapter. Place the adapter on a flat surface in an open area. Plug the other end of the USB cable into one of the USB ports on the TiVo box. The power indicator ( ) lights when the cable is connected. If you have not yet set up your TiVo box... If your TiVo box is set up and running... You can tell whether you have the correct software version by looking at the Welcome Screen (the first Guided Setup screen): Check the software version The TiVo Wireless USB Adapter requires TiVo software version 7.2.1 or higher. To check the software version on your TiVo box, go to TiVo Central, select Messages and Setup, then System Information. If the Software Version is 7.2.1 or higher, you can skip to Step . Connect to a phone line Connect the TiVo Box to a phone line. If the Welcome screen looks like this, Guided Setup includes steps for configuring your TiVo Box to work with your Wireless USB Adapter. After Guided Setup, go to TiVo Central, select Messages and Settings, then System Information. If the Software Version is lower than 7.2.1, only perform Step to the right (to make sure you have the latest software). Get new software To get new software from the TiVo service: a. From TiVo Central, select Messages & Setup, then Settings, then Phone & Network. b. Select "Connect to the TiVo service now." The connection and download may take some time. c. After the download, check the Phone & Network screen to make sure the last status is "Pending Restart." d. If the last status is not "Pending Restart" go to www.tivo.com/adapters for further instructions. e. Restart the TiVo Box (from TiVo Central, select Messages & Setup, then Restart System). Complete the Network Settings If the Welcome screen looks like this, there are a few extra steps to take. After you follow the instructions on the Start Here poster and complete Guided Setup, continue with Step to the right. From TiVo Central, select Messages & Settings, then Settings, then Phone & Network. Select Change Phone & Network Settings, then Network Settings. The onscreen instructions will help you configure the adapter for your network. You'll need to know your network name and WEP key (if applicable). The adapter's link indicator ( ) blinks slowly while it searches for your network. Once the adapter is connected, the link indicator stops blinking. During data transmission, the indicator flickers rapidly. If you need help setting up your adapter, visit www.tivo.com/getready. Check out the Troubleshooting chapter in the TiVo Viewer’s Guide for more help with connecting your TiVo DVR, completing Guided Setup, and using the TiVo service. Visit www.tivo.com/support to find Installation Self-Help, Frequently Asked Questions, step-by-step troubleshooting, and to get interactive help from expert users. www.tivo.com/support
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2005:08:01 13:05:50Z Modify Date : 2005:08:02 17:33:10+08:00 Page Count : 2 Creation Date : 2005:08:01 13:05:50Z Author : pconrad Producer : Acrobat PDFWriter 5.0 for Windows NT Mod Date : 2005:08:02 17:33:10+08:00 Metadata Date : 2005:08:02 17:33:10+08:00 Title : YadaInstructionsOutside.ai Creator : pconradEXIF Metadata provided by EXIF.tools