Tiger Products Co Ltd John Deere 5083E Users Manual

2015-02-02

• Assembly JD5101E LYNX.pdf
  • Assembly JD5101E LYNX.pdf
    • TRACTOR PREPARATION
    • CRANKSHAFT ADAPTER
    • DRIVESHAFT & FRONT PUMP MOUNTING
    • ADJUSTING REAR WHEELS
    • 4WD FRONT TIRE ADJUSTMENT
    • POLYCARBONATE SAFETY WINDOW
    • MAIN FRAME INSTALLATION
      • ASSEMBLY SECTION
    • CABLE CONTROL LEVER STAND (SVC ONLY UNITS)
    • CABLE CONTROL LEVER STAND
    • SWITCH BOX WIRING
    • VALVE MOUNTING
    • VALVE PLUMBING (SVC ONLY UNITS)
    • VALVE PLUMBING (WITH MID-MOUNT VALVE)
    • MANUAL LIFT VALVE PORTS
    • MANUAL SWITCH BOX MOUNTING
    • HOSE AND WIRE ROUTING
    • HYDRAULIC TANK INSTALLATION
    • FILLING HYDRAULIC RESERVOIR
    • WHEEL SPACER WITH WHEEL WELL TANK
    • INSTALLING O-RING FITTINGS
    • GENERAL HOSE INSTALLATION
    • HOSE COVERING
    • REAR STOW LYNX HOSE ROUTING
    • TEMPERATURE GAUGE MOUNTING (OPTIONAL)
    • WHEEL WEIGHT MOUNTING
    • SINGLE COLUMN BOOM REST MOUNTING
    • 3-POINT BOOM REST MOUNTING
    • AXLE BRACE MOUNTING
    • MAIN BOOM INSTALLATION
    • DECK ATTACHMENT
    • FINAL PREPARATION FOR OPERATION
    • MOWER TESTING
• Boom Op.pdf
  • TIGER BOOM MOWER
  • OPERATING INSTRUCTIONS
    • 1. OPERATOR REQUIREMENTS
    • 2. TRACTOR REQUIREMENTS
      • Tractor Requirements and Capabilities
      • 2.1 ROPS and Seat Belt
      • 2.2 Operator Thrown Object Protection
      • 2.3 Tractor Lighting and SMV Emblem
      • 2.4 Tractor Ballast
    • 3. GETTING ON AND OFF THE TRACTOR
      • 3.1 Boarding the Tractor
      • 3.2 Dismounting the Tractor
    • 4. STARTING THE TRACTOR
    • 5. CONNECTING ATTACHING HEADS TO THE BOOM
    • 6. PRE-OPERATION INSPECTION AND SERVICE
      • 6.1 Tractor Pre-Operation Inspection/Service
      • 6.2 Boom Unit Pre-Operation Inspection and Service
      • 6.3 Cutting Component Inspection
        • Table 1:
      • 6.4 Switchbox
    • 7. Joystick Controlled Mowers
      • 7.1 Switch Box and Joystick Control
        • Joystick Control
    • 8. DRIVING THE TRACTOR AND IMPLEMENT
      • 8.1 Starting the Tractor
      • 8.2 Brake and Differential Lock Setting
      • 8.3 Driving the Tractor and Boom
    • 9. OPERATING THE BOOM UNIT AND ATTACHED HEAD
      • 9.1 Foreign Debris Hazards/Overhead Obstructions
      • 9.2 Operating Speed and Ground Speed
      • 9.3 Operating the Attached Mower Heads
      • 9.5 50” & 60” Boom Rotary
      • 9.6 50” Boom Flail
      • 9.7 63” Boom Flail
      • 9.8 Shutting Down the Attached Head- For Standard Equipment
    • 10. TRACTOR, BOOM, AND ATTACHED HEAD STORAGE
    • 11. TRANSPORTING THE TRACTOR AND IMPLEMENT
      • 11.1 Placing Boom Arm on Boom Arm Rest - For Standard Equipment
      • 11.2 Transporting on Public Roadways
      • 11.3 Hauling the Tractor and Implement
        • OPERATION SECTION