Tiinlab Acoustic Technology LYXQEJ02JY Mi Bluetooth Neckband Earphones Basic User Manual 15 LYXQEJ02JY UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3973924
Application ID	sDtp+kTwHbZ273dk59lkkA==
Document Description	15_LYXQEJ02JY UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.74kB (1046811 bits)
Date Submitted	2018-08-22 00:00:00
Date Available	2018-08-22 00:00:00
Creation Date	2018-08-10 09:47:30
Producing Software	Adobe Acrobat Pro DC 18.11.20055
Document Lastmod	2018-08-21 16:44:22
Document Title	15_LYXQEJ02JY UserMan
Document Creator	Adobe Acrobat Pro DC 18.11.20055

Reconnecting
After turned on, the unit will reconnect to the last paired device. If
there's no prior connection history, or that it fails to reconnect to
any device, the unit will enter standby mode and wait for
connection.
Mi Bluetooth Neckband Earphones Basic
Functions
Incoming calls
Press: volume +
Press and hold: track backward
Clearing Connection History
When turned on, press and hold both Volume + and Volume buttons for 5 seconds to clear all connection history. Then the unit
enters standby mode and waits for connection.
Connection Lost
Music
Press: volume Press and hold: track forward
Press: answer
Press and hold: decline
Press × 1: play/pause
When your phone turns off Bluetooth feature or is out of wireless
range, the unit will enter standby mode. If connection is not restored
within 5 minutes, the unit will turn off automatically.
Manufacutred for: Xiaomi Communications Co., Ltd.
Manufactured by: TiinLab Acoustic Technology (Shenzhen) Co., Ltd.
(a Mi Ecosystem company)
For further information, please go to www.mi.com
For warranty information, please visit mi.com.
Note:
Power and volume display: iOS support, may not support other
devices.
Do not use power bank to charge Mi Bluetooth Neckband
Earphones Basic.
Product Overview
Turning on
Specifications
Press and hold the power button for 3 seconds, followed by one blue
flash to turn on the unit.
The unit is ready to be paired when turned on for the first time.
Model: LYXQEJ02JY
Charging time: 50 minutes
Input: 5 V 1.0 A
Playback time: 7 h
Weight: 35 g
Charging port: Micro-USB
Wireless range: 10 m
Dimensions: 198 × 170 × 38 mm
Wireless connectivity: Bluetooth 4.2
Bluetooth profiles: HFP/HSP/A2DP/AVRCP
Turning off
Press and hold the power button for 3 seconds, followed by one red
flash to turn off the unit.
Charging
The indicator light turns red when charging, and goes off when fully
charged. When turned on, the unit will reboot when you charge it.
Micro-USB charging port
Volume +
Volume Indicator
Power button
Mic/Indicator
Connecting
Connecting to a new Bluetooth device
When turned off, press and hold the power button for 3 seconds,
followed by blue light flashing, and the unit is ready to be connected.
Turn on Bluetooth feature on your phone and locate "Mi Bluetooth
Neckband Earphones Basic". If your phone prompts for a password,
enter "0000", and the indicator turns blue breath light.
WEEE
Electrical and electronic equipment, parts and batteries marked
with this symbol must not be disposed of with normal household
wastage, it must be collected and disposed of separately to protect
the environment.
Your Tiinlab retailer will advise you of the correct way of disposal in
your country.
CE
Hereby, Tiinlab, declares that this equipment is in compliance with
the applicable Directives and European Norms, and amendments.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.mi.com/en/service/support/declaration.html
Safety Caution:
Do not expose batteries or battery packs to excessive heat such as
sunshine, fire or the like.
FCC Warning:
FCC ID: 2AN5MLYXQEJ02JY
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:08:10 09:47:30+08:00
Creator                         : Adobe Acrobat Pro DC 18.11.20055
Modify Date                     : 2018:08:21 16:44:22+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2018:08:21 16:44:22+08:00
Creator Tool                    : Adobe Acrobat Pro DC 18.11.20055
Format                          : application/pdf
Document ID                     : uuid:0e51fab7-bbbb-44a5-9705-40eec8659adb
Instance ID                     : uuid:686dc32d-1040-4e8e-ab15-c3848457bef5
Producer                        : Adobe Acrobat Pro DC 18.11.20055
Page Count                      : 2
For                             : Administrator,
Bounding Box                    : 66 -469 941 -71
Container Version               : 11
Creator Version                 : 21

EXIF Metadata provided by EXIF.tools