TomTom 4BA63 GPS Navigation System with WLAN and BT/BLE User Manual TomTom GO Basic

TomTom International BV GPS Navigation System with WLAN and BT/BLE TomTom GO Basic

User Manual

TomTom GO Basic User Manual 17.5
2 Contents Welcome to navigation with TomTom 6 What's new 7 New in this release ................................................................................................ 7 Video workshops ................................................................................................... 7 Get going 9 Installing in your car .............................................................................................. 9 Positioning the device ............................................................................................ 9 Switching on and off .............................................................................................. 9 Setting up ......................................................................................................... 10 GPS reception .................................................................................................... 10 Sending information to TomTom .............................................................................. 10 Device not starting .............................................................................................. 11 Charging your device ............................................................................................ 11 Finding the memory card slot ................................................................................. 11 Caring for your TomTom GO ................................................................................... 11 What's on the screen 12 The map view..................................................................................................... 12 The guidance view ............................................................................................... 14 The route bar ..................................................................................................... 15 Distances and the route bar ............................................................................... 16 The quick menu .................................................................................................. 16 Navigation buttons............................................................................................... 17 Main Menu smaller buttons and symbols ..................................................................... 18 Volume control ................................................................................................... 20 Using gestures .................................................................................................... 20 Changing the text and button size ............................................................................ 21 Reordering the Main Menu buttons ........................................................................... 21 Syncing using TomTom MyDrive 22 About TomTom MyDrive ........................................................................................ 22 Logging in to your TomTom account ......................................................................... 22 Finding and syncing locations using MyDrive ................................................................ 22 Syncing My Places locations with MyDrive ................................................................... 23 Importing a community POI list - MyDrive - NOT CONNECTED ........................................... 23 Deleting a community POI list ................................................................................. 23 Importing a track GPX file...................................................................................... 23 Deleting a track GPX file ....................................................................................... 24 Saving and restoring your personal navigation information .............................................. 24 Using step by step search 25 About search ...................................................................................................... 25 Entering search terms ........................................................................................... 25 Working with search results ................................................................................... 26 About postcodes ................................................................................................. 27 List of POI type icons ............................................................................................ 28
3 Planning a route using step by step search 32 Planning a route to an address ................................................................................ 32 Planning a route to a POI ....................................................................................... 33 Planning a route to a city centre ............................................................................. 35 Planning a route to a POI using online search .............................................................. 37 Planning a route using the map ............................................................................... 38 Planning a route using My Places ............................................................................. 40 Planning a route using coordinates using step by step search ........................................... 41 Planning a route in advance ................................................................................... 42 Finding a car park ............................................................................................... 43 Finding a petrol station ......................................................................................... 45 Changing your route 48 The Current Route menu ....................................................................................... 48 Avoiding a blocked road ........................................................................................ 50 Avoiding part of a route ........................................................................................ 50 Types of route .................................................................................................... 51 Avoiding an incident or route feature using the route bar ............................................... 51 Adding a stop to your route from the current route menu ............................................... 52 Adding a stop to your route using the map ................................................................. 52 Deleting a stop from your route ............................................................................... 52 Skipping the next stop on your route ........................................................................ 52 Reordering stops on a route ................................................................................... 52 My Routes 54 About My Routes ................................................................................................. 54 About GPX and ITN files ........................................................................................ 54 Saving a route .................................................................................................... 55 Navigating using a saved route ................................................................................ 56 Navigating to a stop on a saved route ....................................................................... 56 Adding a stop to a saved route using the map .............................................................. 58 Recording a track ................................................................................................ 59 Navigating using a track ........................................................................................ 59 Deleting a route or a track from My Routes ................................................................. 60 Finding the memory card slot ................................................................................. 60 Exporting tracks to a memory card ........................................................................... 60 Importing routes and tracks from a memory card ......................................................... 61 Map Share 62 About Map Share ................................................................................................. 62 Creating a map change report ................................................................................. 62 Creating a map change report from a marked location ................................................... 63 Types of map change ............................................................................................ 64 Traffic 66 About RDS-TMC ................................................................................................... 66 The route bar ..................................................................................................... 66 Looking at traffic on the map ................................................................................. 67 Looking at traffic on your route ............................................................................... 68 Traffic incidents ................................................................................................. 68 Approaching a traffic jam warning ........................................................................... 69 Avoiding a traffic jam on your route ......................................................................... 70 Advanced Lane Guidance ....................................................................................... 70
4 Time-dependent speed limits ................................................................................. 71 Speed Cameras 72 About speed cameras ........................................................................................... 72 Crossing into another area or country ....................................................................... 72 Speed camera warnings ......................................................................................... 72 Changing the way you are warned ............................................................................ 73 Updating locations for cameras and hazards ............................................................... 74 Danger Zones 75 About danger zones ............................................................................................. 75 Crossing into another area or country ....................................................................... 75 Danger zone warnings ........................................................................................... 75 Changing the way you are warned ............................................................................ 76 Updating locations for danger zones ......................................................................... 76 My Places 77 About My Places .................................................................................................. 77 Setting your home or work location .......................................................................... 77 Changing your home location .................................................................................. 78 Adding a location from My Places ............................................................................. 79 Add a location to My Places from the map .................................................................. 79 Adding a location to My Places using search ................................................................ 79 Adding a location to My Places by marking ................................................................. 80 Deleting a recent destination from My Places .............................................................. 80 Deleting a location from My Places ........................................................................... 80 Settings 81 Appearance ....................................................................................................... 81 Display ......................................................................................................... 81 Route Bar ...................................................................................................... 82 Guidance view ................................................................................................ 83 Automatic Zoom.............................................................................................. 83 Motorway exit previews .................................................................................... 83 Voices .............................................................................................................. 84 Maps ................................................................................................................ 85 Route Planning ................................................................................................... 85 Sounds and Warnings ............................................................................................ 86 Language and Units .............................................................................................. 87 System ............................................................................................................. 87 Help ................................................................................................................ 88 Getting Help 89 Help ................................................................................................................ 89 Product certification 90 Finding product certification information on your device ................................................ 90 Updating using MyDrive Connect 91 About MyDrive Connect ......................................................................................... 91
5 TomTom account ................................................................................................ 91 Setting up MyDrive Connect .................................................................................... 91 Addendum 93 Addendum 98 Copyright notices 105
6 This User Manual explains all you need to know about your new TomTom GO Basic navigation device. To learn about getting started with your device and installing it in your vehicle, we recommend that you read the Get going chapter. After that, you will probably want to learn about Quick Search and you can read all about that in the Using Quick Search chapter. For information about what you see on the device itself, go to What's on the screen. To plan your first route, go to Planning a route. Tip: There are also frequently asked questions (FAQs) at tomtom.com/support. Select your product model from the list or enter a search term. We hope you enjoy reading about and, most importantly, using your new navigation device! Welcome to navigation with TomTom
7 New in this release Version 17.1 Advanced Lane Guidance in a split screen As you approach motorway exits and junctions you can now view map guidance and lane guidance side-by-side in a split screen. To learn more go to Advanced Lane Guidance in this User Manual. Quick search and Step by step search You can now choose between two different ways of searching for an address or a POI. To learn more go to Choosing which search to use in this User Manual. Read aloud traffic messages Your device now reads aloud traffic messages about traffic events on your route. To learn more go to Sounds and Warnings in Settings in this User Manual. Using community POI lists You can now show your imported community POI lists permanently on the map. To learn more go to Using community POI lists in this User Manual. Other bug fixes and improvements Various performance improvements and bug fixes have been implemented. Video workshops You can find many videos on our YouTube channel to help you learn about your new TomTom GO Basic and other TomTom products. Visit www.youtube.com/user/TomTomOfficial/videos to find out more! Tip: Look on the TomTom YouTube Channel for videos in your own language. Here are links to some videos that you might find interesting: TomTom GO - playlist of English videos https://www.youtube.com/playlist?list=PLSoQAVympWk79NpmQgjFgigup-UgowFxE Using MyDrive UK English: https://www.youtube.com/watch?v=PIs5tGFhQIA French (France): https://www.youtube.com/watch?v=lYpPDxxXSwk Spanish (Spain): https://www.youtube.com/watch?v=HkZqdD5MkHI German: https://www.youtube.com/watch?v=Skg6PWMbRxI What's new
8 Italian: https://www.youtube.com/watch?v=AybGRzpgu1s TomTom Sports products https://www.youtube.com/playlist?list=PLSoQAVympWk4DPx3_yMxwHP7cqa17iW6H
9 Installing in your car Use the supplied mount to install your TomTom GO Basic in your vehicle. Read the instructions about positioning your device before you install your TomTom GO. To install your TomTom GO, do the following: 1. Connect the supplied USB cable to the mount. If the mount is integrated into your TomTom GO, connect the USB cable to the device. Note: Use ONLY the USB cable supplied with your TomTom GO. Other USB cables may not work. 2. Connect the USB cable to the USB car charger and plug this into the power supply on your dashboard. 3. Choose the best smooth location, on your windscreen or side window, to mount your TomTom GO Basic. Tip: If the mount is integrated into your TomTom GO, you can easily change the rotation of your device. Release the mount from the TomTom GO using the thumb indent. Turn the mount around and clip it back onto the device until you hear it click. 4. Make sure that both the suction cup on the mount and your windscreen are clean and dry. 5. Press the suction cup of the mount firmly against your windscreen. 6. Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock. 7. If your mount is not integrated into your TomTom GO, place your TomTom GO in the mount, making sure that it clicks into place. Dashboard adhesive disks are available as part of a range of accessories for your TomTom GO. For more information, go to tomtom.com/accessories. Positioning the device Be careful where you install your TomTom GO. The TomTom GO shouldn't block or interfere with any of the following:  Your view of the road.  The controls in your vehicle.  Your rear-view mirrors.  The airbags. You should be able to reach your TomTom GO easily without leaning or stretching. In a car, you can attach your TomTom GO to the windscreen or side window or you can use a Dashboard Mount Disk to attach the mount to your dashboard. Switching on and off Switching your device on Press the On/Off button until your device starts. If the device was off you see the map view. If your device was sleeping you see the last screen you were looking at. Get going
10 Sending your device to sleep To send your navigation device to sleep, press the On/Off button and then release it. You can also press the On/Off button for more than 2 seconds until you see the Sleep and Turn Off buttons. Select Sleep to make the device sleep. Tip: To send your navigation device to sleep when the USB cable is unplugged or whenever it is removed from the mount, go to Battery settings in the Settings menu. Switching your device off completely To switch off your navigation device completely, you can do one of the following:  Press and hold the On/Off button for more than 2 seconds until you see the Sleep and Turn Off buttons. Select Turn Off to switch off the device. Select the "back" button if you don't want to switch your device off.  Press and hold the On/Off button for more than 5 seconds until the device switches off. Setting up Note: The language you choose will be used for all text on the screen. You can always change the language later in Language and Units in the Settings menu. When you first switch on your TomTom GO Basic, you have to answer a few questions to set it up. Answer the questions by touching the screen. GPS reception When you first start your TomTom GO Basic, it may need a few minutes to determine your position. In future, your position will be found much faster. To ensure good satellite reception, use your TomTom GO outdoors and keep it upright. Large objects such as tall buildings can sometimes interfere with reception. Important: QuickGPSfix contains information about satellite positions which helps your TomTom GO find your position faster. QuickGPSfix information is sent to Always Connected devices in real time and to Smartphone Connected devices when connected to TomTom services using your smartphone. You can also update QuickGPSfix using MyDrive. Sending information to TomTom When you first start navigating or you have reset your TomTom GO, your TomTom GO asks for permission to collect some information about your use of the navigation device. The information is stored on your TomTom GO until we retrieve it. We use it anonymously to improve our products and services. If you use our services, we will also use your location information to deliver the services to you. You can change whether you send this information with us at any time by doing the following: 1. In the Main Menu, select the Settings button. 2. Select System. 3. Select Your information & privacy. 4. Select the button to turn sending of information on or off. Note: If you choose not to send location information to us, you will no longer receive our services. This is because services need to send the location of your device to TomTom in order to receive the traffic information related to where you are. The end date of your subscription remains the same, even if you do not send this information to us. You can find current and more detailed information at tomtom.com/privacy.
11 Device not starting In rare cases, your TomTom GO device may not start correctly or may stop responding to your taps. First, check that the battery is charged. To charge the battery, connect your TomTom GO device to the car charger. It can take 3 - 5 hours to fully charge the battery depending on the type of device. Important: Do not charge your device using your vehicle's own USB port because it is not powerful enough. If this does not solve the problem, you can perform a reset. To do this, press and hold the On/Off button until your TomTom GO begins to restart. Charging your device The battery in your TomTom GO Basic charges when you connect it to your TomTom vehicle charger, to your computer or to a USB Home Charger. Important: Do not charge your device using your vehicle's own USB port because it is not powerful enough. You are warned when the battery level is low or critical. You lose your connection to some TomTom services when the battery level is low or critical. When the battery is empty, your TomTom GO goes into sleep mode. Important: On device models START 42/52, START 40/50/60, and GO 51/61, the screen intentional-ly dims when you connect your device to your computer. The screen also dims if you use a non-TomTom charger that does not provide enough power when charging. Note: Use ONLY the USB cable supplied with your TomTom GO. Other USB cables may not work. Finding the memory card slot The memory card slot is under the mount. To insert a memory card, release the mount from the TomTom GO using the thumb indent. Insert the memory card into the slot. Clip the mount back onto the device until you hear it click. Caring for your TomTom GO It is important to take care of your device:  Do not open the casing of your device under any circumstances. Doing so may be dangerous and will invalidate the warranty.  Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.
12 The map view The map view is shown when you have no planned route. Your actual location is shown as soon as your TomTom GO has found your GPS location. You can use map view in the same way as you might look at a traditional paper map. You can move around the map using gestures, and zoom using the zoom buttons. Important: Everything on the map is interactive including the route and the map symbols - try selecting something and see what it does! Tip: To open a pop-up menu for an item on the map, for example a route or a POI, select the item to open the menu. To select a location on the map, select and hold the location until the pop-up menu opens. The map shows your current location and many other locations such as your My Places locations. If you have not planned a route the map is zoomed out to show the area around your location. If you have planned a route, your complete route is shown on the map. You can add stops to your route directly from the map. When you start to drive, the guidance view is shown. What's on the screen
13 1. Back button. This button returns the map to an overview of your whole route or, if no route is planned, moves the map to put your current location at the centre. 2. Switch view button. Select the switch view button to change between the map view and the guidance view. When in map view, if you are driving, the small arrow rotates to indicate your direction of travel relative to north, with north being up. 3. Zoom buttons. Select the zoom buttons to zoom in and out. 4. Current location. This symbol shows your current location. Select it to add it to My Places or search near your current location. Note: If your TomTom GO cannot find your location the symbol appears grey. Note: You cannot change the current location symbol. 5. Selected location. Press and hold to select a location on the map. Select the pop-up menu button to show options for the location, or select the Drive/Ride button to plan a route to the location. 6. Main Menu button. Select the button to open the Main Menu. 7. Map symbols. Symbols are used on the map to show your destination and your saved places:  Your destination.  Your home location. You can set your home location in My Places.  Your work location. You can set your work location in My Places.  A stop on your route.  A location saved in My Places.  A marked location.  When a search for POIs near destination is done and the results are shown on the map, less important POIs are shown as black pins with white crosses.  Symbols to show your community POI locations. Select a map symbol to open the pop-up menu, then select the menu button to see a list of actions you can take. 8. Traffic information. Select the traffic incident to display information about the traffic delay. Note: Traffic information is only available if your TomTom GO Basic has TomTom Traffic. 9. Your route, if you have planned a route. Select the route to clear it, change the route type, add a stop or save changes to your route. 1. Speed cameras or danger zones on your route. Select the speed camera or danger zone symbol to display more information.
14 2. Route bar. The route bar is shown when you have planned a route. The guidance view The guidance view is used to guide you along the route to your destination. The guidance view is shown when you start driving. You see your current location and details along your route, including 3D buildings in some cities. Note: 3D buildings in guidance view are not available on all devices. The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of travel, change the 2D and 3D default settings. Tip: When you have planned a route and the 3D guidance view is shown, select the switch view button to change to the map view and use the interactive features. When your TomTom GO starts after sleeping and you have a route planned, you are shown the guidance view with your current location. 1. Switch view button. Select the switch view button to change between the map view and the guidance view. When in guidance view, if you are driving, the small arrow rotates to indicate your direction of travel relative to north, with north being up. 2. Zoom buttons. Select the zoom buttons to zoom in and out. Tip: On some devices you can also pinch to zoom in and out. 3. Instruction panel. This panel shows the following information:  The direction of your next turn.  The distance to your next turn.
15  The name of the next road on your route.  Lane guidance at some junctions. Note: Select the instruction panel to see a list of turn-by-turn text instructions for your planned route. 4. Route symbols. Symbols are used on your route to show your starting location, your stops, and your destination. 5. Main Menu button. Select the button to show the Main Menu. 6. Speed panel. This panel shows the following information:  The speed limit at your location.  Your current speed. If you drive more than 5 km/h or 3 mph over the speed limit the speed panel turns red. If you drive less than 5 km/h or 3 mph over the speed limit the speed panel turns orange.  The name of the street you are driving on.  The speed camera or risk zone report button. 7. Current location. This symbol shows your current location. Select the symbol or the speed panel to open the quick menu. Note: If your TomTom GO cannot find your location the symbol appears grey. Note: You cannot change the current location symbol. 8. Route bar. The route bar is shown when you have planned a route. Important: To see a wider route bar showing additional route information, change the setting for Route Information. The route bar The route bar is shown when you have planned a route. It has an arrival information panel at the top, and a bar with symbols underneath. Important: To see a wider route bar showing additional route information, change the setting for Route Information. Note: The distance ahead shown by the route bar depends on the overall length of your route. The arrival information panel shows the following information:  The estimated time that you will arrive at your destination.  The length of time to drive to the destination from your current location.  A parking button is shown near the destination flag when parking is available near your destination. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. If you have stops on your route, select this panel to change between information about the next stop and your final destination. You can choose the information you see on the arrival information panel. The bar uses symbols to show the following information:  The next two stops on your route.  Petrol stations that are directly on your route.  TomTom Traffic.
16  TomTom Speed Cameras and Danger Zones.  Rest stops directly on your route. You can choose the information you see on your route. The symbols are in the order that they occur on your route. For traffic incidents, the symbol for each incident alternates between showing the type of incident and the delay in minutes. Select a symbol to see more information about a stop, an incident or a speed camera. If a symbol is shown on top of another symbol, selecting the symbols zooms in on the route bar to show each symbol separately. You can then select a symbol. The total time delay due to traffic jams and other incidents on your route, including information provided by IQ Routes, is shown above the symbols. For a complete list of incident types, see Traffic incidents. The bottom of the route bar represents your current location and shows the distance to the next incident on your route. Note: To make the route bar more readable some incidents may not be shown. These incidents will always be of minor importance and only cause short delays. The route bar also shows status messages, for example Finding fastest route or Playing route preview. Distances and the route bar The distance ahead shown on the route bar depends on the length of your route, or the distance remaining on your route.  For remaining distances longer than 50 km (31 miles), only the next 50 km (31 miles) is shown. The destination icon is not shown. Tip: You can scroll the route bar to see your whole route (not available on iOS).  For remaining distances between 10 km (6 miles) and 50 km (31 miles), the complete distance is shown. The destination icon is shown fixed at the top of the route bar.  For remaining distances of less than 10 km (6 miles) the complete distance is shown. The destination icon moves down towards the chevron symbol as you get nearer to your destination. The top half of the route bar shows twice the distance of the bottom half, as shown in the following examples:  A remaining distance of 50 km on the route bar is split into 34 km (21 miles) at the top and 16 km (9 miles) at the bottom.  A remaining distance of 10 km on the route bar is split into 6.6 km (4 miles) at the top and 3.3 km (2 miles) at the bottom. The route bar is constantly updated as you drive. The quick menu To open the quick menu, select the current location symbol or the speed panel in the guidance view. You can then do any of the following:  Mark a location  Change a speed limit  Avoid a blocked road  See your current location or your latitude/longitude if not on a named road.
17 Navigation buttons On the map view or guidance view, select the Main Menu button to open the Main Menu. The following navigation buttons are available in the Main Menu: Note: Not all features are supported on all devices. Drive To Select this button to open the Drive To menu to search for an address, a Point of Interest or a latitude-longitude coordinate, then plan a route to that location. Address In the Drive To menu, select this button to search for an address then plan a route to that location. Point of Interest In the Drive To menu, select this button to search for a point of interest, then plan a route to that location. Latitude Longitude In the Drive To menu, select this button to search for a lati-tude-longitude coordinate, then plan a route to that location. Drive Home Select this button to drive to your home location. If this button is not included in your main menu, go to My Places to set up you home location. Drive to Work Select this button to drive to your work location. If this button is not included in your main menu, go to My Places to set up your work location.
18 Recent Destination Select this button to open the list of your recent destinations. Select a recent destination to plan a route to that destination. Current Route Select this button to clear or change your planned route. My Places Select this button to show your saved places. My Routes Select this button to show your saved routes. Parking Select this button to find car parks. Petrol Station Select this button to find petrol stations. Start Recording Select this button to start or stop recording a track. Main Menu smaller buttons and symbols On the map or guidance view, select the Main Menu button to open the Main Menu.
19 The following buttons are available in the Main Menu screen, in addition to the navigation buttons: Select this button to open the Settings Menu. Select this button to open the Help Menu. The Help Menu contains information about your TomTom GO, for example, map version, device serial number and legal information. Select this button to reorder the buttons in the Main Menu. Select this button to return to the previous screen. Select this button to return to the map view or guidance view. This symbol shows the power level of the battery in your device. This symbol shows that your TomTom GO is connected to your TomTom account. This symbol shows that your TomTom GO is not connected to your TomTom account. This button shows that you will hear voice instructions. Select this button to switch off voice instructions. You will no longer hear spoken route instructions but you will still hear information such as traffic information and warning sounds. Tip: You can select the types of instructions you want to hear. Select Voices in the Settings Menu and select the instructions you want to hear. This button shows that you will not hear voice instructions. Select this button to switch on voice instructions. This button shows that the display is using day colours. Select the button to reduce the brightness of the screen and display the map in darker colours. When driving at night or when driving through a dark tunnel, it is easier to view the screen and less distracting for the driver if the brightness of the screen is dimmed. Tip: Your device automatically switches between day and night colours depending on the time of day. To switch off this feature, select
20 Appearance in the Settings menu and switch off Switch to night colours when dark. This button shows that the display is using night colours. Select the button to increase the brightness of the screen and display the map in brighter colours. Select this button to refresh your screen. Volume control On the map or guidance view, select the Main Menu button to open the Main Menu. Select and slide the volume control to change the volume of voice instructions and warnings. If the voice instructions are switched off, the volume control will still change the volume of the warnings. Using gestures You use gestures to control your TomTom GO. In this User Manual, you learn how to use gestures to control your TomTom GO. Below is an explanation of each gesture. Double tap Touch one finger on the screen twice in rapid succession. Example of when to use this: Zooming in on the map. Drag Put one finger on the screen and move it across the screen. Example of when to use this: Scrolling around in the map. Flick Flick the tip of a single finger across the screen. Example of when to use this: Scrolling a big distance on the map. Tip: Flick isn't available on all devices. Press and hold Put one finger on the screen for more than 0.5 second. Example of when to use this: Opening the pop-up menu for a place on the map.
21 Pinch to zoom Touch the screen with your thumb and a finger. Move them apart to zoom in or move them together to zoom out. Example of when to use this: Zooming in and out on the map. Tip: Pinch to zoom isn't available on all devices. If pinch to zoom isn't available, use the zoom buttons to zoom in and out. Tap or select Tap a single finger on the screen. Example of when to use this: Selecting an item in the Main Menu. Changing the text and button size You can change the size of the text and the buttons you see on the screen, for example to make the text easier to read and the buttons easier to use. Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen. To change the size of the text and the buttons, select the Settings button in the Main Menu, then select Appearance, then select Size of text and buttons. Your device must restart to apply the change. Reordering the Main Menu buttons To reorder the buttons in the Main Menu to suit your preference, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Press and hold the button you want to move for two seconds. Tip: Alternatively, select the Edit button in the Main Menu. The menu button is shown with left and right arrows. 3. Press the left or right arrow on the menu button to move the button to a new position in the menu. 4. Select and move other buttons to the order you want. 5. Select Done.
22 About TomTom MyDrive TomTom MyDrive is the easy way to import community POI files on your TomTom GO Basic. Logging in to your TomTom account You must log in to MyDrive to sync to your TomTom account. When you log in to your TomTom account from your navigation device or when using a web browser, syncing with your account happens automatically. Logging in to MyDrive on your TomTom GO 1. Connect your TomTom GO to your computer using MyDrive Connect. 2. In the Main Menu on your device, select TomTom Services. 3. Select MyDrive. 4. Enter the email address and password you use for your TomTom account. 5. Select Log In. Your TomTom GO connects to your TomTom account. 6. Return to the map view. Your TomTom GO automatically saves your personal navigation information to your TomTom account. Logging in to MyDrive using a web browser Log in using your TomTom account email address and password. When you are logged in, you can see your personal navigation information from your navigation devices, and you can select destinations and create Places to sync with your navigation devices. Finding and syncing locations using MyDrive When you are logged in to TomTom MyDrive, you can find locations in MyDrive and sync them with your TomTom GO My Places locations. 1. Connect your TomTom GO to your computer using MyDrive Connect. 2. In a web browser, log in to your TomTom account. 3. On the map, select a destination. Tip: You can search for a destination or you can move the map and select a destination. You can also select a destination from your My Places list. 4. Click on the location, then open the pop-up menu and select Add to My Places. The location is shown in the Favourites list in the MyDrive My Places menu. 5. Log in to MyDrive on your TomTom GO. Your TomTom GO syncs with your TomTom account and receives the new Favourites location. The location is stored in My Places. Syncing using TomTom MyDrive
23 Syncing My Places locations with MyDrive When you are logged in to MyDrive on your TomTom GO, the locations you have added to My Places are automatically synced with your TomTom account. You can see your My Places locations and the POI place lists when you are logged in to MyDrive in a web browser. Importing a community POI list - MyDrive - NOT CONNECTED You can find collections of community POIs on the Internet and upload them to My Places using MyDrive in a web browser. A POI collection might contain, for example, campsites or restaurants for the area you are travelling in, and provides an easy way to select a location without the need to search for the location each time. Your TomTom GO uses .OV2 files for POI collections. To upload an .OV2 file to your TomTom GO, do the following: 1. Connect your TomTom GO to your computer using MyDrive Connect. 2. In MyDrive, select Import POI File and browse to your .OV2 file. Tip: The name of the places list in My Places will be the same as the name of the .OV2 file. Edit the name of the file so that you can easily recognise it in My Places. 3. Upload the POI list to your TomTom GO. Your new POI list is shown in the Places list. 4. In My Places, select your new POI list. Your new POI list opens showing all the POIs in the list. Select the map view to see the POIs on the map. Deleting a community POI list You can only delete an uploaded POI list when your TomTom GO is connected to your computer using MyDrive Connect. To delete a POI list, do the following: 1. Connect your TomTom GO to your computer using MyDrive Connect. 2. In MyDrive, select the POI file you want to delete, then select Delete. The POI list is removed from your My Places list. Importing a track GPX file GPX files (GPS exchange format) GPX files contain a very detailed recording of a route, including any off-road locations. A GPX file might contain, for example, a tourist route or a preferred fixed route. You can find collections of .GPX files on the Internet and upload them to My Routes using MyDrive in a web browser. GPX files become tracks after import. Tracks have a beginning and an end but no stops, and there's a fixed map-dependent route between these points. Your device follows this fixed route as closely as possible. You can edit tracks using MyDrive. Using GPX files You use MyDrive on your computer to import .GPX track files to your TomTom device. The tracks are saved in the My Routes menu. Your device will navigate along the GPX track exactly and will not offer to replan your route, even if a faster route is available.
24 Importing a track GPX file Note: Your TomTom GO needs at least 400 MB free space before it can import .OV2 and .GPX files. If you see the message You need more space, make space available by deleting unwanted .OV2 or .GPX files using MyDrive, or deleting device content, for example delete a map you don't use. To import a .GPX file using MyDrive, do the following: 1. Connect your TomTom GO to your computer using MyDrive Connect. 2. In MyDrive, select My Routes. 3. Select Import a GPX File and browse to your .GPX track file. Tip: The name of the track file in My Routes will be the same as the name of the .GPX file. Edit the name of the file so that you can easily recognise it in My Routes. Your new track is shown in the My Routes list. 4. Wait for the track file to upload to your TomTom GO. 5. Open My Routes. Your imported track is shown in your My Routes list. Deleting a track GPX file You can only delete an uploaded track GPX file when your TomTom GO is connected to your computer using MyDrive Connect. To delete a POI list, do the following: 1. Connect your TomTom GO to your computer using MyDrive Connect. 2. In MyDrive, select My Routes. 3. Select the track file you want to delete, then select Delete. The track is removed from your My Routes list. Saving and restoring your personal navigation information When you are logged in to MyDrive on your TomTom GO, and your TomTom GO is connected to your computer, your personal navigation information is continuously and automatically saved to your TomTom account. If you reset your TomTom GO, or log in to MyDrive on a different device, your saved personal navigation information is restored to your TomTom GO or the different device. The following personal navigation information is saved to your TomTom account:  MyDrive destinations.  All saved locations in My Places.  All imported POI place lists.  All imported tracks. Tip: MyDrive also syncs your locations in My Places with your TomTom account. You can see your My Places locations and the POI place lists you have imported in MyDrive on a web browser or on the MyDrive app. Make sure that there is at least 400 MB of free space on your device before syncing your device with MyDrive. If there is not enough space, your MyDrive information will not be synced. You can check the amount of available space by going to About in the Help menu on your device. Note: Syncing a lot of information to your device may take some time.
25 About search STEP BY STEP SEARCH ONLY You use the Drive To menu to find addresses and Points of Interest (POI) and then navigate to them. You must first choose the country or state you want to search in, then enter the address or the POI type or name. In Address, you can search for the following:  A specific address in a town or city.  A postcode, for example, type in W1D 1LL for Oxford Street, London.  A city to navigate to a city centre, for example, type in London. In Points of Interest, you can search for the following:  A POI (Point of Interest), for example type in museum. In Latitude Longitude, you can search for the following:  Latitude and longitude coordinates, for example, type in: N 51°30′31″ W 0°08′34″. Entering search terms STEP BY STEP SEARCH ONLY Select Drive To in the Main Menu, then select Address or Point of Interest. The search screen shows the keyboard and the following buttons: 1. Back button Select this button to go back to the previous screen. 2. Search input box Using step by step search
26 Enter your search term here. As you type, matching addresses or POIs are shown. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. Tip: To edit, select a word you have already typed to place the cursor. You can then insert or delete characters. 3. Country or state selector Select the country or state you want to search. 4. View button Select this button to return to the map view or guidance view. 5. 123?! button Select this button to use numbers and symbols on your keyboard. Select the =\< button to toggle between the numbers and more symbols. Select the ABC button to go back to the general keyboard. 6. Keyboard layout button Select this button to change your keyboard layout to another language. You can choose up to four layouts from the list. If you have more than one layout selected, selecting the keyboard layout button opens a pop-up so you can quickly swap between your selected keyboard layouts. Press and hold this button to go directly to the list of all the layouts. 7. Done button Select this button to hide the keyboard. 8. Show/hide keyboard button Select this button to show or hide the keyboard. Tip: Select the Shift key once to make the next letter you type upper case. Double tap the Shift key to use Caps-Lock where all the letters you type are upper case. Select the Shift key once to quit Caps-Lock. Tip: To cancel a search, select the map/guidance view button in the top right-hand corner of the screen. Working with search results STEP BY STEP SEARCH ONLY Your Address or Point of Interest search results are shown in a list. Tip: To see more results, hide the keyboard or scroll down the results list.
27 When you select an address from the list of search results, you can choose to show it on the map, add a cross road or plan a route to that chosen location. To get an exact address you can add the house number. When you select a POI from the list of search results, it is shown on the map. When you show the address or POI on the map, you can use the pop-up menu to add the location to My Places. If a route is already planned, you can add the location to your current route. Note: The best search results are shown on the map. When you zoom in, the lower ranked search results are gradually shown. About postcodes When searching using a postcode, your results depend on the type of postcode used in the country that you are searching in. The following types of postcodes are used:  Postcodes that navigate you to a street or part of a street.  Postcodes that navigate you to an area comprising, for example, a single town, several villages in a rural area or a district in a large city. Postcodes for streets Countries such as the Netherlands and the United Kingdom use this type of postcode. When you search using this type of postcode, enter the postcode, then leave a space and then optionally enter the house number. For example, "1017CT 35". Your device then plans a route to a specific house or building on a specific street.
28 Postcodes for areas Countries such as Germany, France and Belgium use this type of postcode. If you search using a postcode for an area, your results include all the streets in a city district, the whole town, or the villages within that postcode. When using quick search, you may get results from multiple countries if you enter a postcode for an area. Note: If you search using a postcode for an area, you will not get a specific address in your results. This type of postcode is still very useful in reducing the number of search results. For example, a search for Neustadt in Germany returns a long list of possible results. Adding a space followed by the postcode for an area narrows the results down to the Neustadt that you are looking for. As another example, if you want to search in a city, enter a postcode for an area and select the city centre you are searching for from the results. List of POI type icons Legal and financial services Court house Cash dispenser Legal - Solicitors Financial institution Legal - other services Food services Convenience store Fast food restaurant Restaurant Chinese restaurant Accommodation Hotel or motel Luxury hotel Camping ground Economy chain hotel Emergency services
29 Hospital or polyclinic Dentist Police station Veterinarian Doctor Fire station Car-related services Outside parking Petrol station Parking garage Car wash Car dealer Vehicle inspection centre Rental car facility Electrical car charging point(s) Rental car parking Car repair facility Other services Embassy Pet services Government office Telecommunication Company Community service Post office Pharmacy Shopping centre Beauty services Tourist information office Shop
30 Education College or university School Library Convention centre Leisure Casino Winery Theatre Tourist attraction Cinema Zoo Concert hall Amusement park Museum Exhibition centre Opera Cultural centre Nightlife Leisure centre Children's Farm Sport Playing field Swimming pool Mountain peak Water sports Beach Tennis court
31 Park or recreation area Ice skating rink Yacht basin or marina Sports centre Stadium Golf course Religion Church Place of worship Travel Railway station Mountain pass Airport Scenic or panoramic view Ferry terminal Postcode Note: Not used in all countries. Border crossing Residential area Bus station City centre Toll gate Electrical car charging stations Rest area Truck stop
32 Planning a route to an address STEP BY STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to an address, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Drive To. 3. Select Address. You can change the country or state setting by selecting the flag before you select a city. 4. Enter the town or city name, or the postcode. Towns with similar names are shown in the list while you type. When the correct city or town appears in the list, select the name. 5. Enter the street name. Streets with similar names are shown in the list while you type. Planning a route using step by step search
33 When the correct street name appears in the list, select the name. 6. Enter the house number. Tip: If the house number does not exist then it appears red. The nearest house number is then shown in the Drive to button. 7. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route to a POI STEP BY STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to a POI type or a specific POI using search, do the following: 1. Select the Main Menu button to open the Main Menu.
34 2. Select Drive To. 3. Select Point of Interest. You can change the country or state setting by selecting the flag before you select a city. 4. Choose where to search. You can select from one of the following options: - Near me. - In town or city. - Along route if you have planned a route. - Near destination if you have planned a route. - Near point on map if you have selected a point on the map. - Near departure point if you have planned a route or a track. 5. Enter the name of the place you want to plan a route to. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". As you type, suggestions based on what you have entered are shown. 6. Select a POI type or an individual POI. If you selected a POI type, select a POI. The location is shown on the map.
35 7. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 8. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route to a city centre STEP BY STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route to a city centre, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Drive To. 3. Select Address. You can change the country or state setting by selecting the flag before you select a city. 4. Enter the town or city name. Towns with similar names are shown in the list while you type.
36 When the correct city or town appears in the list, select the name. 5. Select the city centre POI. 6. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
37 Planning a route to a POI using online search STEP BY STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. Note: Searching online is only available on connected devices. To search online on your TomTom GO, you must be connected to TomTom services. If you did a POI search but could not find the POI you were looking for, you can search TomTom Places online. To find POIs by searching online, do the following: 1. Search for a POI using Drive to in the Main Menu. The search results are shown in a list. 2. Scroll to the bottom of the list and select Search Places Online. 3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on the keyboard. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". Note: When searching, you can search near your current location, in a town or city, or near your destination. If you want to change how the search is done, select the button to the right of the search box. The search results are shown in a column.
38 Tip: To see more results, hide the keyboard or scroll down the results list. Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: 4. Select an individual POI from the list. The location is shown on the map. 5. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 6. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route using the map Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route using the map, do the following:
39 1. Move the map and zoom in until you can see the destination that you want to navigate to. Tip: You can also select a map symbol to open the pop-up menu, then select the Drive/Ride button to plan a route to that location. 2. When you have found your destination on the map, select it by pressing and holding the screen for about one second. A pop-up menu shows the nearest address. 3. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can use the location you selected in other ways, such as adding it to My Places, by selecting the pop-up menu button.
40 Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route using My Places To navigate to one of My Places from your current location, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select My Places. A list of all your Places opens. 3. Select the Place you want to navigate to, for example Home. Your chosen Place is shown on the map with a pop-up menu. 4. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
41 Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route using coordinates using step by step search STEP BY STEP SEARCH ONLY Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To plan a route using a pair of coordinates, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Drive To. 3. Select Latitude Longitude. Tip: The example coordinates shown on the screen are your current latitude and longitude. 4. Type in your pair of coordinates. You can enter any of these coordinate types:  Decimal values, for example: N 51.51000 W 0.13454 51.51000 -0.13454 Tip: For decimal values you don't have to use a letter to indicate the latitude and longi-tude. For locations west of the 0 meridian and locations south of the equator, use a minus sign (-) before the coordinate.  Degrees, minutes and seconds, for example: N 51°30′31″ W 0°08′34″  GPS standard coordinates, for example: N 51 30.525 W 0 08.569 Note: The bar below the coordinates goes red if you enter coordinates that are not recognised by your TomTom GO. 5. As you type in the coordinates, suggestions are shown based on what you have entered. You can continue typing or select a suggestion. Tip: To see more results, hide the keyboard or scroll down the results list. Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button:
42 6. Select a suggestion for your destination. The location is shown on the map. 7. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes. Planning a route in advance You can plan a route in advance before you drive it. You can save the route as part of your My Routes list. To plan a route in advance, do the following: 1. Search for the location you want to use as a starting point. 2. Select Show on Map. 3. Select the pop-up menu button. A pop-up menu shows a list of options. 4. Select Use as Starting Point. 5. Search for the location you want to use as your destination. 6. Select Show on Map. 7. Select Drive/Ride in the pop-up menu. Your route is planned using your chosen starting point and destination. The estimated journey time is shown at the top of the route bar. Tip: Stops, POIs and Places can all be selected as starting points using their pop-up menus. Tip: You can save the route in My Routes. 8. To drive to the starting point, select Drive/Ride at the top of the screen. The starting point of the route is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Changing the starting point to be your current location 1. Select the starting point of the route in the map view. 2. Select the pop-up menu button.
43 A pop-up menu shows a list of options. 3. Select Remove Starting Point. Your route is replanned with your current location as the starting point. The original starting point is removed from your route. Changing the starting point into a stop 1. Select the starting point on the route in the map view. 2. Select the pop-up menu button. A pop-up menu shows a list of options. 3. Select Change to a Stop. Your route is replanned with the starting point changed into a stop. Finding a car park Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a car park, do the following: 1. Select the Main Menu button to open the Main Menu.
44 2. Select Parking. The map opens showing the locations of car parks. If a route is planned, the map shows car parks near your destination. If a route isn't planned, the map shows car parks near your current location. You can change the screen to show a list of car parks by pressing this button: You can select a car park from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen.
45 If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a car park from the map or the list. A pop-up menu opens on the map showing the name of the car park. 4. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a car park as a stop on your route by using the pop-up menu. Finding a petrol station Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a petrol station, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Petrol Station.
46 The map opens showing the locations of petrol stations. If a route is planned, the map shows petrol stations along your route. If a route isn't planned, the map shows petrol stations near your current location. You can change the screen to show a list of petrol stations by pressing this button: You can select a petrol station from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a petrol station from the map or the list.
47 A pop-up menu opens on the map showing the name of the petrol station. 4. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a petrol station as a stop on your route by using the pop-up menu. A petrol station that is a stop on your route has a blue icon.
48 The Current Route menu When you have planned a route or track, select the Current Route or Current Track button in the Main Menu to open the Current Route or Current Track Menu. The following buttons are available in the menu: Clear Route / Clear Track Select this button to clear the currently planned route or track. The Current Route Menu closes and you return to the map view. Skip Next Stop Select this button to skip the next stop on your route. Find Alternative You see this button when you have planned a route. Select this button to show up to three alternative routes on the map view. Avoid Blocked Road Select this button to avoid an unexpected obstacle that is blocking the road on your route. Avoid Part of Route Select this button to avoid part of a route. Avoid Toll Roads and More Select this button to avoid some types of route features that are on your currently planned route. These include ferries, toll roads and unpaved roads. You can also avoid route features using the route bar. Changing your route
49 Show Instructions Select this button to see a list of turn-by-turn text instructions for your planned route. The instructions include the following:  Your current location.  Street names.  Up to two road numbers shown in road shields whenever available.  An instruction arrow.  An instruction description.  The distance between two consecutive instructions.  Exit number.  The full addresses of stops on your route. Tip: Select an instruction to see a preview of that section of the route in the map view. You can also select the instruction panel in the guidance view to see turn-by-turn text instructions. Add Stop to Route Select this button to add a stop to your currently planned route. You can also add a stop to your route directly from the map. Add to My Routes If you plan a new route that has not already been saved, you see this button. Select this button to save this route as part of your My Routes list. Save Changes to Route If you make a change to a My Route, you see this button. Select this button to save the changes. Change Route Type Select this button to change the type of route used to plan your route. Your route will be recalculated using the new route type. Reorder Stops Select this button to see the lists of stops for your current route. You can then change the order of the stops on your route.
50 Drive to Route or Track Select Drive to Route to plan a route from your current location to the starting point of a My Route. The starting point is converted to a stop. Drive to Track plans a route to the nearest point of the track from your current position. Drive to Starting Point On the Current Track menu, select this button to plan a route to the starting point of the track. The starting point is converted to a stop. For more information, see Navigating using a track. Share Track On the Current Track menu, select this button to export the current track as a GPX file and save it on a memory card for sharing with other users. Play Route or Track Preview Select this button to watch a preview of your planned route or track. Stop Route or Track Preview Select this button to stop the preview of your planned route or track. Avoiding a blocked road If there is a blocked road on your route you can change your route to avoid it. 1. In the guidance view, select the current location symbol or the speed panel. Tip: The speed panel is only shown when you have started driving on your route. 2. Select Avoid Blocked Road. A new route is found that avoids the blocked road. You may get shown up to two alternatives depending on the road network between you and your destination. The new route is shown on the map view with the difference in travel time in a balloon. Note: It may not be possible to find an alternative route around the blocked road if none exists. 3. Select the new route by selecting the time balloon. Guidance to your destination resumes avoiding the blocked road. As soon as you start driving, the guidance view is shown automatically. Avoiding part of a route If part of a road is blocked or you wish to avoid part of a route, you can select a specific section of a route to avoid.
51 1. Select the Main Menu button to open the Main Menu. 2. Select Current Route. 3. Select Avoid Part of Route. A screen opens showing a list of the sections that comprise your current route. 4. Select the section of the route that you want to avoid. A preview shows you the section you have chosen on the map. 5. Select Avoid. A new route is found that avoids your chosen route section. The new route is shown on the map view. Note: It may not be possible to find an alternative route around the route section if none exists. Guidance to your destination resumes avoiding your chosen route section. As soon as you start driving, the guidance view is shown automatically. Types of route Select Change Route Type to change the type of route planned to your current destination. Your route is recalculated using the new route type. You can select the following types of route:  Fastest route - the fastest route to your destination. Your route is constantly checked taking into account the traffic conditions.  Shortest route - the shortest route to your destination. This may take much longer than the fastest route.  Most eco-friendly route - the most fuel-efficient route.  Avoid motorways - this type of route avoids all motorways.  Winding route - the route with the most turns. Note: Winding routes are only available for TomTom Rider navigation devices. You can set the default route type in the Settings Menu. Avoiding an incident or route feature using the route bar You can avoid an incident or route feature that is on your route. Note: It may not be possible to find an alternative route around the incident or route feature if none exists. 1. In the route bar, select the symbol for the route feature you want to avoid.
52 2. The route feature is shown on the map together with the pop-up menu. 3. Select Avoid in the pop-up menu. A new route is found that avoids the route feature. Adding a stop to your route from the current route menu 1. In the Main Menu, select Current Route. 2. Select Add Stop to Route. The map view is shown. 3. To select a stop, do one of the following steps:  Zoom in on the map, then press and hold to select a location. In the pop-up menu, select Add.  Select Search and search for a location. When you have found a location, select Add. Your route is recalculated to include your stop. Adding a stop to your route using the map 1. Press the switch view button to show the map. Your complete route is shown on the map. 2. Zoom in on the map, then press and hold to select a location. 3. Select the pop-up menu button. 4. Select Use in Route. 5. Select Add to Current Route. Your route is recalculated to include your stop. Deleting a stop from your route 1. In the route bar, press the stop you want to delete. The map zooms in to the stop and shows a pop-up menu. Tip: If you select the wrong stop press the back button to return to the map. 2. Select Delete This Stop. The stop is deleted and your route is recalculated. Skipping the next stop on your route 1. In the Main Menu, select Current Route. 2. Select Skip Next Stop. The map view is shown. The next stop on your route is deleted and your route is recalculated. Reordering stops on a route 1. In the Main Menu, select Current Route. 2. Select Reorder Stops. The map view is shown with the route cleared. The starting point, destination and all the stops are shown. 3. Select the stops one by one in the order you wish to drive them.
53 The symbols change to a flag as you select each stop. The last stop you select becomes your destination. Your route is recalculated with the stops in the changed order.
54 About My Routes My Routes provides an easy way to save and retrieve routes and tracks. You may want to use My Routes in one or more of the following situations:  While working - Your job involves driving several routes with multiple stops on a daily basis. Your routes can change and you need to be flexible and be able to change the order of your stops or change the planned route.  While on holiday - You are going on holiday and want to plan and save a route. Your route includes scenic roads, stops at various hotels, and other places like tourist attractions.  While touring - You want to follow a tour you have downloaded from the Internet, or drive a route another user has shared with you.  While commuting to work - You want to add one or two regular stops between home and work. Your route back home in the evening is the reverse of your route to work in the morning. Routes can be created and saved on your TomTom GO or in MyDrive. You can also edit routes using MyDrive. About routes and tracks The term "route" includes two types of route from one place to another:  Routes have a starting point and a destination, and perhaps some stops. Your device calculates your preferred type of route between all these points, for example, the fastest or most eco-nomical, and uses Traffic. You can edit a route by, for example, adding stops or moving the starting point. Routes can be imported but cannot be exported from your device.  Tracks also have a starting point and a destination, but have no stops. Your route follows the track as closely as possible, ignoring your preferred type of route and traffic conditions, and any traffic on the route. You can edit tracks using MyDrive. Tracks can be imported and exported from your device. Tip: Tracks have a dotted arrow! Important: Routes and tracks cannot be stored on the same memory card as maps because different memory card formatting is used. About GPX and ITN files GPX files (GPS exchange format) GPX files contain a very detailed recording of where you have been on your track, including any off-road locations. GPX files become tracks after import. My Routes
55 Using GPX files There are several things you can do with your GPX file:  Use TomTom MyDrive to view your track file.  Export to a memory card or directly to your computer, then use your computer to view the file using software such as Google Earth. Note: While viewing your recording, you may notice that the recorded GPS locations do not always correspond with the roads. This can happen for several reasons. Firstly, your device tries to keep the files small and this can cause a slight loss of data precision. Secondly, your device records the actual data from the GPS chip for an accurate representation of where you’ve been, rather than what you see on your screen. Thirdly, the software with which you view the recording may have the maps misaligned.  Share the file with others by exporting it. Note: Tracks can be imported and exported. ITN files (TomTom's own Itinerary file format) An ITN file contains less detail than a GPX file. An ITN file can contain a maximum of 255 locations which is enough to recreate a route accurately. ITN files become routes after import. Using ITN files There are several things you can do with your ITN file:  You can import an ITN file onto your TomTom GO Basic so you can travel that same route again and get navigation instructions.  Use TomTom MyDrive to view your route. Note: Routes can be imported but cannot exported. Saving a route 1. Plan a route using the steps described in Planning a route. Tip: If you cannot see your planned route on the map view, select the back button to show your route. 2. Select the route. 3. Select the pop-up menu button to open the menu. 4. Select Manage Route, then Add to My Routes. The name of the route is shown in the edit screen.
56 5. Edit the name of the route so that you can easily recognise it. 6. Save your route in the My Routes list. Tip: You can also save a route using the Add to My Routes button in the Current Route menu. Navigating using a saved route To navigate using a previously saved route, do the following: 1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. To navigate to the start of the saved route, select Drive/Ride depending on which device you are using. The starting point of the saved route is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route. When the pop-up menu opens, select Change to a Stop. Alternatively, select Drive to Route or Ride to Route in the Current Route menu. Navigating to a stop on a saved route You can navigate from your current location to a stop on your saved route instead of to the start of the saved route. The stop is changed to the start of your route. Your new starting point might be one closer to your current location, or you might just want to make your route shorter.
57 Note: The route from the original starting point up to the new starting point is removed from the route. Note: Your original route in My Routes is not changed. If you want to see the whole route, select the route again in My Routes. 1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. Select the stop that you want to use as your starting point, then select the pop-up menu button to open the menu. 4. Select Start Route From Here. Your route is calculated from the new starting point. 5. Select Drive/Ride.
58 The starting point of your route is converted to your first stop and then the route is planned from your current location. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route. When the pop-up menu opens, select Change to a Stop. Alternatively, select Drive to Route or Ride to Route in the Current Route menu. Adding a stop to a saved route using the map Note: You can also press and hold a location on the map and select Add to Current Route from the pop-up menu. 1. Press the switch view button to show the map. Your complete route is shown on the map. 2. Select the route. 3. Select the pop-menu button to open the menu. 4. Select Manage Stops. 5. Select Add Stop to Route. 6. Select your new stop on the map. Tip: If you know the name of your new stop, you can use Search to select your stop instead of using the map. 7. Select the Add Stop button to add this location as a stop. Your route is recalculated to include your stop.
59 Tip: To update the saved route in your My Routes list with the changes, select the route om the map then select Save Changes to Route in the pop-up menu. Recording a track You can record a track while you drive, with or without a route planned. After recording, you can then export your track so that you can share it with others. Alternatively, you view it using TomTom MyDrive if you’re logged in to MyDrive on your device. Tip: When logged in to MyDrive on your device, the recorded route on your device will be synced with the MyDrive website. To record a track, do the following: 1. In the Main Menu, select Start Recording. A red dot appears in the lower right-hand corner of the screen and initially flashes 3 times to show that you are now recording. The dot remains on the screen until you stop recording. 2. To stop recording, select Stop Recording in the Main Menu. 3. Enter a name for your track or you can leave it at the suggested date-time combination. 4. Select Add or Finished, depending on the device you are using. 5. Your track is saved in My Routes. Note: You can export tracks as GPX files and save them on a memory card for sharing with others. Navigating using a track You can import tracks on to your TomTom GO using MyDrive. To navigate using an imported track, do the following: 1. In the Main Menu, select My Routes. 2. Select a track from your list. The track route is shown on the map view.
60 3. Select the track, then select the pop-up menu. 4. Select Drive to Starting Point. The starting point of the track is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Note: You see two different colours on the map for your route and track. You see one colour for the route from your current location to the starting point, and another second colour for the track. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route. When the pop-up menu opens, select Drive to Starting Point. Alternatively, select Drive to Starting Point or Ride to Route in the Current Track menu. Deleting a route or a track from My Routes 1. In the Main Menu, select My Routes. 2. Select Edit List. 3. Select the routes you want to delete. 4. Select Delete. Finding the memory card slot The memory card slot is under the mount. To insert a memory card, release the mount from the TomTom GO using the thumb indent. Insert the memory card into the slot. Clip the mount back onto the device until you hear it click. Exporting tracks to a memory card You can export tracks as GPX files and save them on a memory card for sharing with other users. Important: Routes and tracks cannot be stored on the same memory card as maps because different memory card formatting is used. Note: Currently, you can export only tracks from your TomTom GO. To export one or more tracks, do the following: 1. In the Main Menu, select My Routes. 2. Select Share Tracks.
61 Tip: Alternatively, when in map view, select a track and select Share Track from the pop-up menu. 3. Select one or more tracks from your list for export. Tip: To select or deselect all routes for export, select the pop-up menu button. 4. Select Share then select Export to Memory Card. You see the message Saving. Tip: If there is not enough space on your memory card or your card is not formatted correctly, you get on-screen help to fix the problem. 5. When you see a message that your tracks have been exported successfully, remove your memory card to share your tracks with other users. Note: Each exported route is saved as a GPX file in the TomTom Routes folder on your memory card. Importing routes and tracks from a memory card You can import two types of files from a memory card:  GPX files - these become tracks after import.  ITN files - these become routes after import. ITN files are TomTom itinerary files. Other users can record itinerary files and share them with you, or you can download both ITN and GPX files from TomTom MyDrive. To import one or more routes and tracks from a memory card, do the following: 1. Insert a memory card into the card slot on your TomTom GO Basic. If routes are found on your memory card, a message confirms this. 2. Select Import Routes. 3. Select one or more routes from the list on your memory card for import. 4. Select Import. You see the message Importing tracks. Your routes are imported onto your device. 5. When you see a message that your routes have been imported successfully, remove your memory card. 6. To view your imported routes and tracks, select My Routes in the Main Menu.
62 About Map Share You can report map changes using Map Share. These map changes are then shared with other TomTom device users when they receive a map update. There are two ways to report a map change:  Select a location on the map and create the change report immediately.  Mark a location and create the change report later. To send your map change reports to TomTom, you must connect your TomTom GO to your computer and use MyDrive Connect. All map changes are verified by TomTom. These verified changes are then available as part of the next map update which you can get when you connect your device to MyDrive Connect using a USB connection. Tip: If a road closure is reported using Map Share, the closure is verified and immediately shown by TomTom Traffic. Creating a map change report Important: For safety reasons, do not enter the full details of a map change while you are driving. You can always mark the location and create the report later. To create a map change report, do the following: 1. Press and hold to select the location of the map change on the map view. 2. Select the pop-up menu button to open the menu. 3. Select Report Map Change from the pop-up menu. 4. Select the type of map change you want to apply. Map Share
63 Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 5. Follow the instructions for your chosen type of map change. 6. Select Report. 7. Connect your TomTom GO to MyDrive Connect to send your map change report to TomTom and receive map changes from other TomTom users. Creating a map change report from a marked location If you see a map inconsistency while you are driving, you can mark the location so you can report the change later. Tip: You can mark your current location even when you are driving. Important: Do not report map changes while you are driving. 1. In the map view or the guidance view, select the current location symbol or the speed panel. The Quick Menu opens. 2. Select Mark Location. The marked location is stored in My Places with the date and time you saved the location. 3. In the Main Menu, select My Places. 4. Open the Marked locations folder and select the marked location. The marked location is shown on the map. 5. Select Report Map Change from the pop-up menu. 6. Select the type of map change you want to apply.
64 Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 7. Follow the instructions for your chosen type of map change. 8. Select Report. The marker for the marked location is removed from the map. 9. Connect your TomTom GO to MyDrive Connect to send your map change report to TomTom and receive map changes from other TomTom users. Types of map change There are several types of map change available. Note: If you want to report a map change of a type not described below, use the Map Share Reporter at tomtom.com. For all map changes described below, you need to connect your TomTom GO to MyDrive Connect to send your map changes report to TomTom and receive map changes from other TomTom users. Road Restriction Select this option to block or unblock a road. You can block or unblock the road in one or both directions by doing the following: 1. Press and hold to select the location of the map change on the map view. 2. Select the pop-up menu button to open the menu. 3. Select Report Map Change from the pop-up menu. 4. Select Road Restriction. Select the road sign at either end of the road to change it from open to closed or vice versa. 5. Select Report. Street Name Select this option to correct an incorrect street name. 1. Press and hold to select the location of the map change on the map view. 2. Select the pop-up menu button to open the menu. 3. Select Report Map Change from the pop-up menu. 4. Select Street Name. 5. Enter the correct street name. 6. Select Report.
65 Turn Restriction Select this option to report incorrect road turn restrictions. 1. Press and hold to select the location of the map change on the map view. 2. Select the pop-up menu button to open the menu. 3. Select Report Map Change from the pop-up menu. 4. Select Turn Restriction. 5. If the incorrect junction is shown, select Select another junction. 6. Select the approach direction. The map rotates so that the direction you are coming from is shown at the bottom of the screen. 7. Select the traffic signs in turn to change the turn restrictions for each road at the junction. 8. Select Report. Speed Limit Select this option to correct the speed limit on the map. 1. Press and hold to select the location of the map change on the map view. 2. Select the pop-up menu button to open the menu. 3. Select Report Map Change from the pop-up menu. 4. Select Speed Limit. 5. Select the correct speed limit. If the correct limit is not shown, scroll left or right through the available speed limits. 6. Select Report.
66 About RDS-TMC The Traffic Message Channel (TMC), also known as RDS-TMC, transmits traffic information as a radio signal and is available free of charge in many countries. TMC is not a TomTom service, but is available when using the TomTom RDS-TMC Traffic Receiver. Note: TMC is not available in all countries. To check the availability of TMC services in your country, go to tomtom.com/5826. TomTom is not responsible for the availability or quality of traffic information provided by TMC. The route bar The route bar is shown when you have planned a route. It has an arrival information panel at the top, and a bar with symbols underneath. Tip: You can also choose to see a wider route bar showing additional route information (not available on all devices or apps). Note: The distance ahead shown by the route bar depends on the overall length of your route. The arrival information panel shows the following information: Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination.  The estimated time that you will arrive at your destination.  The length of time to drive to the destination from your current location.  A parking button is shown near the destination flag when parking is available near your destination. If you have stops on your route, select this panel to change between information about the next stop and your final destination. You can choose the information you see on the arrival information panel. Traffic status - if your TomTom GO isn't receiving any traffic infor-mation, a symbol showing traffic with a cross appears underneath the arrival information panel. The bar uses symbols to show the following information:  A faster route, if there is traffic on your route.  The stops on your route. Tip: To quickly remove a stop, select it in the route bar and use the pop-up menu.  Petrol stations that are directly on your route.  TomTom Traffic incidents.  TomTom Speed Cameras and Danger Zones.  Rest stops directly on your route. You can choose the information you see on your route. Traffic
67 The symbols are in the order that they occur on your route. For traffic incidents, the symbol for each incident alternates between showing the type of incident and the delay in minutes. Select a symbol to see more information about a stop, an incident or a speed camera. If a symbol is shown on top of another symbol, selecting the symbols zooms in on the route bar to show each symbol separately. You can then select a symbol. The total time delay due to traffic jams, weather, and other incidents on your route, including information provided from historical road usage, is shown above the symbols. For a complete list of incident types, see Traffic incidents. The bottom of the route bar represents your current location and shows the distance to the next incident on your route. In addition, you can choose to see the current time if you switch the setting on. Note: To make the route bar more readable some incidents may not be shown. These incidents will always be of minor importance and only cause short delays. The route bar also shows status messages, for example Finding fastest route or Playing route preview. Looking at traffic on the map Traffic incidents are shown on the map. If several traffic incidents overlap the highest priority incident is shown - for example, a road closure is higher priority than road works or a closed lane. Tip: Select an incident on the map to see more detailed information. 1. Traffic incident that affects your route in your direction of travel. A symbol or number at the start of the incident shows the type of incident or the delay in minutes, for example 5 minutes.
68 The colour of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate. For a complete list of incident types, see Traffic incidents. 2. Traffic incident on your route but in the opposite direction of travel. 3. Traffic incidents on roads that are not visible at your current zoom level. Looking at traffic on your route Information about traffic incidents on your route is shown in the route bar on the right-hand side of the map and guidance views. The route bar tells you about traffic delays while you are driving, using symbols to show you where each traffic incident is located on your route. When using the map view, you can also select symbols on the map itself. Note: If your TomTom GO isn't receiving any traffic information, a symbol showing traffic with a cross appears underneath the arrival information panel. Note: To make the route bar more readable some incidents may not be shown. These incidents will always be of minor importance and only cause short delays. To get more information about an incident, select an incident in the route bar. The map opens zoomed in on the incident and an information panel opens showing detailed information about the traffic incident. The information shown includes:  The cause of the traffic incident - for example accident, road works, lane closure, or weather.  The severity of the incident - slow traffic, queuing traffic or stationary traffic.  The delay time.  The length of the incident. For a complete list of incident types, see Traffic incidents. Select the back button to go back to the guidance view. Traffic incidents The following traffic incident symbols are used in the map view and in the route bar to show the cause of a traffic jam: Traffic Accident Dangerous conditions
69 Roadworks Lane closure Road closure Rain Fog Ice or snow Wind The symbol or number at the start of the incident shows the type of incident or the delay in minutes, for example 4 minutes. The colour of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate. Traffic speed is 0% to 20% of the allowed speed. Traffic speed is 20% to 40% of the allowed speed. Traffic speed is 40% to 100% of the allowed speed. Traffic speed is normal. Road closed, no traffic. Approaching a traffic jam warning A warning is given as you approach a traffic jam. You are warned in several ways:
70  A warning symbol is shown in the route bar.  The route bar zooms in to the start of the traffic jam.  Your distance to the start of the traffic jam is shown in the route bar.  The colour of the road on the route bar changes to orange or red, depending on the severity of the traffic jam.  The background colour of the route bar background changes to red if you are driving too fast towards the traffic jam.  You hear a warning sound. To change the way you are warned, select Sounds & Warnings in the Settings menu. Avoiding a traffic jam on your route You can avoid a traffic jam that is on your route. Note: Sometimes the quickest route is still the route that has the traffic jam. Note: It may not be possible to find an alternative route around the traffic jam if none exists. Avoiding a traffic jam using the route bar 1. In the route bar, select the symbol for the traffic jam you want to avoid. The traffic jam is shown on the map. 2. Select the pop-up menu button. 3. Select Avoid in the pop-up menu. A new route is found that avoids the traffic jam. Avoiding a traffic jam using the map 1. On the map view, zoom in and select the traffic jam that is on your route. The traffic jam with an information panel is shown on the map. 2. Select the pop-up menu button. 3. Select Avoid. A new route is found that avoids the traffic jam. Advanced Lane Guidance Note: Lane guidance is not available for all junctions or in all countries. Advanced Lane Guidance helps you prepare for motorway exits and junctions by showing the correct driving lane for your planned route.
71 As you approach an exit or junction, the lane you need is shown on the screen. Tip: To close the lane image, select anywhere on the screen. You can choose to see a split screen with the Guidance view on the left and lane guidance on the right, or a full screen with only lane guidance. You can also switch off lane guidance. Go to Appearance in Settings to change the Motorway exit previews setting. Time-dependent speed limits Some speed limits change depending on the time of day. For example, you may see the speed limit near schools decrease to 40 km/h or 25 mph in the morning between 08.00 - 09.00 and in the afternoon between 15.00 - 16.00. Where possible, the speed limit shown in the speed panel changes to show these variable speed limits. Some speed limits change depending on driving conditions. For example, the speed limit will decrease if there is heavy traffic, or the weather conditions are bad. These variable speed limits are not shown in the speed panel. The speed shown in the speed panel is the maximum speed limit allowed in good driving conditions. Important: The speed limit shown in the speed panel is only an indication. You must always obey the actual speed limit for the road you are on and the conditions you are driving in.
72 About speed cameras The Speed Cameras service warns you about the following camera locations:  Fixed speed camera locations.  Average speed camera locations.  Speed enforcement zones.  Red light camera locations.  Traffic restriction cameras. The Speed Cameras service also warns you about the following safety hazards:  Accident blackspot locations. Note: Your new TomTom GO Basic comes pre-loaded with speed camera locations. To keep these camera and hazard locations up-to-date, connect your TomTom GO to TomTom MyDrive frequently. Crossing into another area or country When you drive into an area or country that does not permit speed camera warnings, your TomTom GO switches the speed cameras service off. You will not receive speed cameras warnings in those areas or countries. Some areas or countries permit limited speed camera warnings, for example only warnings for fixed cameras, or warnings for risk zones. Your TomTom GO automatically switches to give limited warnings when you cross into those areas or countries. Speed camera warnings Warnings are given as you approach a speed camera. You are warned in several ways:  A symbol is shown in the route bar and on your route on the map.  Your distance to the speed camera is shown in the route bar.  The speed limit at the camera location is shown in the route bar.  You hear a warning sound as you get near the camera.  While you are approaching a camera or driving in an average speed check area, your speed is monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange. Tip: In the map view or guidance view, you can select a speed camera symbol in the route bar to see the type of camera, the maximum speed and also the length of an average speed check area. In the map view, you can also select a speed camera that is shown on your route. Symbol shown on map Symbol shown in route bar Description Fixed speed camera - this type of camera checks the speed of passing vehicles and is fixed in one place. Speed Cameras
73 Symbol shown on map Symbol shown in route bar Description Average speed cameras - these types of cameras measure your average speed between two points. You are warned at the start and end of the average speed check area. While you are driving in an average speed check area, your average speed is shown, instead of your current speed. The distance to the end of the area is shown in the route bar. Speed enforcement zones - these zones can contain multiple speed cameras. You are warned at the start and end of a speed enforcement zone. While you are driving in a speed enforcement zone, your current speed is shown, and the visual warning is shown in the route bar. Red light camera - this type of camera checks for vehicles breaking traffic rules at traffic lights. There are two types of traffic light camera - those which check if you drive through a red light and those which check for driving through a red light together with speeding. Traffic restriction - this type of warning warns you about restricted roads. Accident blackspot - this type of warning is given for a place where road traffic accidents have historically been concentrated. You are warned at the start and end of the accident blackspot. While you are driving in an accident blackspot, your current speed is shown. When you are in the blackspot, the visual warning continues to be shown in the route bar. Changing the way you are warned To change the way you are warned about speed cameras, select Sounds & Warnings in the Settings menu. You can then set how you want to be warned for the different types of cameras and safety hazards. You can choose to be warned, warned only if you are speeding, or never warned. To switch off all warnings, switch off Speed cameras & hazards.
74 Updating locations for cameras and hazards The locations of speed cameras can change frequently. New cameras can also appear without warning and the locations for other hazards, such as accident blackspots, may also change. Your new TomTom GO Basic comes pre-loaded with speed camera locations. To keep these camera and hazard locations up-to-date, connect your TomTom GO to TomTom MyDrive frequently.
75 About danger zones The Danger Zones service warns you about danger zones on your route when you are in France. Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile speed cameras when you are driving in France. To be compliant with this change in French law, speed camera locations are no longer reported but instead areas of danger are indicated as danger zones. Important: Outside of France, you receive warnings about speed cameras. Inside France, you receive warnings about danger zones. When you cross the border, the type of warning you receive changes. A danger zone is a zone specified by French law. The Danger Zones service warns you about danger zones. Danger zones may or may not contain one or more speed cameras or a range of other driving hazards:  Specific locations are not available and a danger zone icon is shown instead as you approach the zone.  The minimum length of the zone depends on the road type and is 300 m for roads in built-up areas, 2000 m (2 km) for secondary roads and 4000 m (4 km) for motorways.  The location of one or more speed cameras, if any, can be at any point within the zone.  If two danger zones are close to each other, the warnings can be merged into a single longer zone. Information about the location of zones is continually updated by TomTom and other users. Note: You cannot remove a danger zone. Note: Your new TomTom GO Basic comes pre-loaded with zone locations. To keep these zones up-to-date, connect your TomTom GO to TomTom MyDrive frequently. Crossing into another area or country When you drive into an area or country that does not permit speed camera warnings, your TomTom GO switches the speed cameras service off. You will not receive speed cameras warnings in those areas or countries. Some areas or countries permit limited speed camera warnings, for example only warnings for fixed cameras, or warnings for risk zones. Your TomTom GO automatically switches to give limited warnings when you cross into those areas or countries. Danger zone warnings Warnings are given 10 seconds before you reach a danger zone. You are warned in several ways:  A symbol is shown in the route bar and on your route on the map.  Your distance to the start of the zone is shown in the route bar.  The speed limit in the zone is shown in the route bar.  You hear a warning sound as you get near the start of the zone. Danger Zones
76  While you are approaching a zone or driving in a zone, your speed is monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange.  While you are driving in a zone your distance to the end of the zone is shown in the route bar. Warning sounds are played for these types of zones: Symbol shown on map Symbol shown in route bar Description Danger zone - this type of warning is only given in France. You are warned at the start and end of the danger zone. Changing the way you are warned To change the way you are warned about danger zones, select Sounds & Warnings in the Settings menu. You can then set how you want to be warned for the different types of zones. You can choose to be warned, warned only if you are speeding, or never warned. To switch off all warnings, switch off Danger zones & hazards. Updating locations for danger zones The locations of danger zones can change frequently. New zones can also appear without warning. Your new TomTom GO Basic comes pre-loaded with zone locations. To keep these zones up-to-date, connect your TomTom GO to TomTom MyDrive frequently.
77 About My Places My Places provides an easy way to select a location without the need to search for the location each time. You can use My Places to create a collection of useful or favourite addresses. Tip: The terms "favourite" and "place" mean the same thing - favourites are places that you go to often. The following items are always in My Places:  Home - Your home location can be your home address or somewhere you often visit. This feature provides an easy way to navigate there.  Work - Your work location can be your workplace address or somewhere you visit often. This feature provides an easy way to navigate there.  Recent destinations - Select this button to select your destination from a list of locations you have recently used as destinations. These also include your stops.  Marked locations - You can mark a location and temporarily add it to My Places. You can add a location to My Places directly in My Places, by selecting a location from the map, by searching for a location or by marking a location. You can upload community POI lists using TomTom MyDrive and choose to show the POI locations on the map. Your home location, work location, marked locations and the locations that you have added appear in a list in My Places and are shown with a marker on the map. Setting your home or work location You can set your home or work locations in the following ways: Setting your home or work location using My Places 1. In the Main Menu, select My Places. 2. Select Add Home or Add Work. Tip: To set your home location, you can also select Add Home from the main menu. 3. To select a location for home or work, do one of the following: My Places
78  Zoom in on the map at the location you want to select. Press and hold to select the loca-tion, then select Set.  Select the Search button and search for a location. Select a location to set as home or work, then select Set. Setting your home or work location using the map 1. In the Map View, move the map and zoom in until you can see your home or work location. 2. Press and hold to select the location. A pop-up menu shows the nearest address. 1. Open the pop-up menu and select Add to My Places. 2. In the name bar, enter the name "Home" or "Work". Note: "Home" must have a capital letter H and "Work" must have a capital letter W. 3. Save the location. Your home or work location is shown on the map. Changing your home location You can change your home location in the following ways. Changing your home location using My Places 1. In the Main Menu, select My Places. 2. Select Home. Your home location is shown on the map, with a pop-up menu. 3. Select Edit Location. 4. To select a new home location, do one of the following:  Zoom in on the map at the location you want to select. Press and hold to select the loca-tion, then select the home location symbol.  Select the Search button and search for a location. Select a location to set as home. Select Set home location. Changing your home location using the map 1. In the Map View, move the map and zoom in until you can see your new home location. 2. Select the location by pressing and holding the screen for about one second. A pop-up menu shows the nearest address. 1. Open the pop-up menu and select Add to My Places. 2. In the name bar, enter the name "Home". Note: "Home" must have a capital letter H.
79 3. Select Add. Your home location is changed to the new location. Adding a location from My Places 1. In the Main Menu, select My Places. 2. Select Add a new place. 3. To select a location, do one of the following:  Zoom in on the map at the location you want to select. Press and hold to select the loca-tion, then select the add location symbol.  Search for a location. Select Show on Map, then select the add location symbol. The name of the location appears in the edit screen. 4. Edit the name of the location so you can easily recognise it. 5. Select Done to save your location in the My Places list. Add a location to My Places from the map 1. Move the map and zoom in until you can see the destination that you want to navigate to. 2. Press and hold to select the location. 3. Select the pop-up menu button. 4. Select Add to My Places. The name of the location is shown in the edit screen. 5. Edit the name of the location so you can easily recognise it. 6. Select Done to save your location in the My Places list. The location you added is shown with a marker on the map. Adding a location to My Places using search 1. Search for a location. 2. Select the location then select Show on map.
80 3. When the map view shows the location, select the pop-up menu button. 4. Select Add to My Places. The name of the location appears in the edit screen. 5. Edit the name of the location so you can easily recognise it. 6. Select Done to save your location in the My Places list. Adding a location to My Places by marking To mark a location and temporarily add it to My Places, do the following: 1. Make sure that your current location is the location you want to mark. 2. Select the current location symbol or the speed panel in the guidance view to open the quick menu. 3. Select Mark Location. 4. Once marked, the location is saved in My Places in the Marked Locations list. If you want to permanently save a marked location, add it My Places by doing the following: 1. In the Main Menu, select My Places. 2. Select Marked Locations and choose your location from the list. The marked location is shown on the map. 3. Select Add to My Places from the pop-up menu. The name of the location appears in the edit screen. 4. Edit the name of the location so you can easily recognise it. 5. Select Add. Deleting a recent destination from My Places 1. In the Main Menu, select My Places. 2. Select Recent Destinations. 3. Select Edit List. 4. Select the destinations you want to delete. 5. Select Delete. Deleting a location from My Places 1. In the Main Menu, select My Places. 2. Select Edit List. 3. Select the locations you want to delete. 4. Select Delete.
81 Appearance Select Settings in the Main Menu, then select Appearance. On this screen, you can change these settings:  Display Select Display to change the appearance of the display.  Route bar Select Route bar to change the information you see in the route bar.  Show POI lists on map Select Show POI lists on map to choose which POI lists you want to show on the map. Note: Show POI lists on map is not available on all TomTom navigation devices or apps.  Guidance view Select Guidance view to change the information you see in the guidance view.  Automatic zoom Select Automatic Zoom to change how you view a junction as you drive.  Motorway exit previews Select Motorway exit previews to change how you view motorway exits or junctions on your route.  Automatic map view switching By default, automatic changing of views is on. This means, for example, that your TomTom GO shows the map view when an alternative route is being suggested, along with several other sets of circumstances. Also, for example, that your TomTom GO shows the guidance view when you start driving and you start to accelerate. Select this setting if you want to turn off automatic changing between guidance view and map view. Display Select Settings in the Main Menu, then select Appearance. Theme colour Select Theme colour to change the colour used in the menus, buttons and icons, and on the map. Tip: The current location symbol and route also change to the selected colour. You can always change back to the original colour. Settings
82 Brightness Select Brightness to change the following settings:  Day brightness Move the slider to adjust the brightness level of the screen during the day.  Night brightness Move the slider to adjust the brightness level of the screen during the night. Select Switch to night colours when dark to automatically switch to night colours when it gets dark. Size of text and buttons Select Size of text and buttons to change the size of the text and the buttons you see on the screen. Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen. Drag the slider to change the text and button size to small, medium or large, then select Apply this change. Your TomTom GO restarts and applies the change. Route Bar In Route Bar you can change these settings: Tip: To find out where the different panels are in the guidance view or map view, see What's on the screen. Select Arrival information to change the information shown in the arrival information panel:  Show remaining distance Select this setting to show the remaining distance left to travel.  Show remaining time Select this setting to show the remaining time left to travel.  Switch between distance and time automatically Select this setting to continuously switch between remaining distance and remaining time.  Show arrival information for Select this setting to show the arrival time for your final destination or your next stop. Select Route information to choose the POIs and route information you want to see in the route bar. Select Show current time to show the current time at the bottom of the route bar. Show wide route bar if possible The wide route bar is not shown by default. You can select this setting to switch on the wide route bar in the guidance view. Note: The wide route bar can only be shown if the screen is wide enough.
83 When the wide route bar is shown, you see more information about your route. For example, you see time and distance to traffic queues and more. Guidance view In Guidance view you can change these settings:  Show current street name This setting displays name of the street you are driving along.  Guidance view style Select this setting to choose from 3D or 2D versions of the guidance view. Both the 2D and 3D guidance views move in your direction of travel. Automatic Zoom Select Automatic zoom to change settings for the automatic zoom in Guidance view when you approach a turn or a junction. Zooming in can make the turn or junction easier to drive.  Zoom in to next turn All the turns and junctions on your route are shown zoomed in to the maximum level.  Based on road type The turns and junctions on your route are shown zoomed in to the standard level for the type of road you are on.  None None of the turns and junctions on your route are shown zoomed in. Motorway exit previews Select Settings in the Main Menu, then select Appearance. Select Motorway exit previews to change settings for the Guidance view as you approach a motorway exits or junctions.  Show map and preview
84 A split screen is shown with the Guidance view on the left and lane guidance on the right.  Show preview only Only lane guidance is shown.  Off Only the Guidance view is shown. Voices Select Settings in the Main Menu, then select Voices. Choosing a voice Select Choose a voice to change the voice that gives spoken directions and other route instructions. A wide range of voices are available. There are computer voices which can read street names and other information directly from the map and there are recorded voices which have been recorded by actors. Note: Computer voices are not available in all languages. If you need a computer voice and your language is unavailable, then you are asked to choose from a list of installed computer voices available for the country you are in. Instruction settings  Read aloud arrival time Use this setting to control whether your arrival time is read aloud.  Read aloud early instructions For example, if you switch on this setting, you could hear early instructions such as "'After 2 km take the exit right" or "Ahead, turn left". Note: When a recorded voice is chosen, you see only this setting because recorded voices cannot read out road numbers, road signs, etc.  Read aloud road numbers Use this setting to control whether road numbers are read aloud as part of navigation instruc-tions. For example, when road numbers are read aloud, you hear "Turn left onto A100".  Read aloud road sign information  Use this setting to control whether road sign information is read aloud as part of navigation instructions. For example, "Turn left onto A302 Bridge Street towards Islington."  Read aloud street names Use this setting to control whether street names are read aloud as part of navigation instruc-tions. For example, when street names are read aloud, you hear "Turn left Graham Road to-wards Hackney."  Read aloud foreign street names Use this setting to control whether foreign street names are read aloud as part of navigation instructions, such as "Turn right onto Champs Élysées". For example, an English computer voice can read and pronounce French street names but pronunciation may not be completely accu-rate.
85 Maps Select Settings in the Main Menu, then select Maps. Changing the map Select Change map to change the map that you are using. You can choose from maps stored either in internal memory or memory cards if your TomTom GO has a memory card slot. Important: Routes and tracks cannot be stored on the same memory card as maps because different memory card formatting is used. Note: Although you can store more than one map on your TomTom GO, you can only use one map at a time for planning and navigation. Route Planning Select Settings in the Main Menu, then select Route Planning. Suggest destinations When no route is planned, your device can learn your daily driving habits to saved favourite Places and also predict destinations when you start the device from sleep mode, for example driving to Work in the morning. Switch on to receive destination suggestions or switch this feature off if you don't want destination suggestions. Note: You must switch on Keep journey history on this device for optional features in Settings > System > Your information and privacy to see this feature. When a faster route is available If a faster route found while you are driving, TomTom Traffic can replan your journey to use the faster route. Select from the following options:  Always take the fastest route - the fastest route will always be chosen for you.  Ask me so I can choose - you will be asked if you want to take the faster route. You can manually select the faster route or you can select the route by steering towards it.  Don't ask me - your device will not find faster routes for you. Always plan this type of route The types of route you can choose from are as follows:  Fastest route - the route which takes the least time.  Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city.  Most eco-friendly route - the most fuel-efficient route for your journey.  Winding route - the route with the most turns.
86 Note: Winding route is not available on all TomTom navigation devices or apps.  Avoid motorways - this type of route avoids all motorways.  Walking route - a route designed for making the journey on foot.  Bicycle route - a route designed for making the journey on a bicycle. Avoid on every route You can choose to avoid ferries and car shuttle trains, toll roads, carpool lanes, and unpaved roads. Set how your TomTom GO should manage each of these road features when the device calculates a route. Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV) and are not present in every country. To travel on these lanes, you may need to have more than one person in the car, for example, or the car may need to use environmentally-friendly fuel. Sounds and Warnings Select Settings in the Main Menu, then select Sounds & Warnings. On this screen, you can change sound and warning settings. Warning type You can choose how you want to be warned:  Read aloud Hear spoken warnings and warnings sounds.  Sounds Hear only warning sounds.  Visual only No warning sounds are given. Warnings You can set how you want to be warned for different types of cameras, danger zones and safety hazards. You can choose to be always warned, warned only if you are speeding, or never warned. Speed Cameras & hazards You can choose to switch off all speed camera, danger zone and hazard warnings. When Speed Cameras & hazards is switched on, you can switch off the warnings for each type of speed camera, danger zone and hazard. Additional settings  Traffic jam ahead Traffic jam warnings in the route bar are part of TomTom Traffic. You can choose never to be warned or to always be warned when approaching a jam too quickly.  When speeding This warning is given as soon as you exceed the speed limit by more than 5 km/h or 3 mph. When you are speeding, the speed panel also turns red in the guidance view.  Screen touch sounds Switch on Screen touch sounds to hear a click when you select an item or touch a button. The click sound means that your selection or touch has been understood.
87 Language and Units Select Settings in the Main Menu, then select Language & Units. On this screen, you can change the following settings:  Language You can see your currently selected language on this screen. Select this setting to change the language used for all buttons and messages that you see on your TomTom GO. When you change the language setting, the voice automatically changes and units are set to automatic.  Country You can see your currently selected country on this screen. Select this setting to change the country. When you change the country, the time/date format, distance units and voice are changed automatically. The list includes the countries from the maps currently installed on your device.  Keyboards Select this setting to choose from a list of available keyboards. You use the keyboard to enter names and addresses, such as when you plan a route or search for the name of a town or a local restaurant.  Units Select this setting to choose the units used on your device for features such as route planning. If you want the units to be set to those used in your current location, select Automatic.  Time and date The time and date are automatically set by satellite clocks but you can change the format of both the time and date using these settings. System Select Settings in the Main Menu, then select System. On this screen, you can change these settings:  About This screen shows you all sorts of useful information about your model of TomTom device. This information is useful during calls to Customer Support and when renewing subscriptions using the TomTom web shop. Some of the information shown here includes:  Your service subscriptions - select a service to see how long your subscription has to run before expiry.  Serial number.  Installed maps.  Free memory space.  Format memory card If your device has a memory card slot, you can format a memory card so it can be used for TomTom maps and other TomTom content.
88  Reset device Select this setting to delete all your saved places and settings and restore the standard factory settings to your TomTom GO Basic. This includes the language, voice settings, warning settings and theme. The contact book from your phone is also deleted. This is not a software update and will not affect the version of the software application in-stalled on your TomTom GO.  Battery settings Select this setting to control power saving options on your TomTom GO.  Your information & privacy Some features require information to be sent to TomTom or stored on your device. You are asked the following questions:  Keep journey history If you agree, your device suggests destinations if the feature is supported by your device. If you disagree at a later time, your historical route information is removed. This means that if you want to receive suggested destinations again at a later time, the feature has to relearn your driving patterns before it can start suggesting destinations. Help Select Help from the Main Menu or the Settings menu. On this screen, you can see the following information:  Guided tour Select this option to get a short tutorial on how to use your navigation device, if supported by your device.  About See System. More help You can get further help by going to tomtom.com/support. For warranty and privacy information, go to tomtom.com/legal.
89 Help Select Help from the Main Menu or the Settings menu. On this screen, you can see the following information:  Guided tour Select this option to get a short tutorial on how to use your navigation device, if supported by your device.  About See System. More help You can get further help by going to tomtom.com/support. For warranty and privacy information, go to tomtom.com/legal. Getting Help
90 Finding product certification information on your device To find product certification information, such as the ICASA-approved certification number, do the following on your TomTom GO: 1. Select Settings in the Main Menu. 2. Select System. 3. Select About. 4. Select Legal information. 5. Select Certificates. 6. You then see the relevant product certification information for your TomTom GO, for example, ICASA. Product certification
91 About MyDrive Connect MyDrive Connect is a desktop-based application that helps you manage the content and services of your TomTom GO Basic. For example, you can use MyDrive Connect to get map updates, software updates or manage your TomTom account. You can also manage your the devices associated with your account using MyDrive Connect. Note: You can associate up to ten TomTom devices with one TomTom account. It is a good idea to frequently connect your TomTom GO to MyDrive Connect to ensure you always have the latest updates. Important: On device models START 42/52, START 40/50/60, and GO 51/61, the screen intentional-ly dims when you connect your device to your computer. Tip: We recommend using a broadband internet connection whenever you connect your TomTom GO to MyDrive Connect. Tip: If you have a compatible navigation device, you can also use TomTom MyDrive to set a destination, share locations and favourites, and save your personal navigation information. TomTom account To download content and to use TomTom services, you need a TomTom account. You can create an account using your computer in one of the following ways:  By selecting the Create account button at tomtom.com.  By selecting the green MyTomTom button at tomtom.com.  By going to tomtom.com/getstarted. Important: Take care when choosing a country during account creation. The correct country is needed if you make a purchase from the TomTom shop and it cannot be changed after the account has been created. Note: If you have more than one TomTom navigation device in use, you need a separate account for each device. Setting up MyDrive Connect To get ready to use MyDrive Connect for the first time, do the following: On your computer, open a web browser and go to tomtom.com/getstarted. 1. Click Get Started. 2. Click Download MyDrive Connect. 3. Follow the instructions on the screen. 4. When prompted, connect your TomTom GO to your computer using the USB cable supplied, then switch your TomTom GO on. Note: Use ONLY the USB cable supplied with your TomTom GO. Other USB cables may not work. Updating using MyDrive Connect
92 Note: For devices with a separate mount, you cannot use the mount to connect your TomTom GO to your computer. Note: You should plug the USB cable directly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor. 5. Enter the requested information for account creation, including your country. When set-up is complete, a TomTom account is created and your TomTom GO is linked to that account. You can now access MyDrive Connect from the notification area on your desktop. MyDrive Connect starts automatically after the account is created. Tip: When you connect your TomTom GO to your computer, MyDrive Connect tells you if there are any updates for your TomTom GO.
93 Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled by the Government of the United States of America, which is solely responsible for its availability and accuracy. GLONASS is operated and controlled by the Government of Russia, which is solely responsible for its availability and accuracy. Changes in GPS or GLONASS availability and accuracy, or in environmental conditions, may impact the operation of this device. TomTom disclaims any liability for the availability and accuracy of GPS or GLONASS. Safety messages Important! Read before use! Death or serious injury could result from failure or partial failure to follow these warnings and instructions. Failure to properly set up, use, and care for this device can increase the risk of serious injury or death, or damage to the device. Use with care warning It is your responsibility to use best judgment, due care and attention when using this device. Don't allow interaction with this device to distract you while driving. Minimise the time spent looking at the device screen while driving. You are responsible for observing laws that limit or prohibit the use of mobile phones or other electronic devices, for example, the requirement to use hands-free options for making calls when driving. Always obey applicable laws and road signs, especially those relating to your vehicle’s dimensions, weight and payload type. TomTom does not guarantee the error-free operation of this device nor the accuracy of route suggestions provided and shall not be liable for any penalties arising from your failure to comply with applicable laws and regulations. Notice for oversized/commercial vehicles Devices without a truck map installed will not provide appropriate routes for oversized/commercial vehicles. If your vehicle is subject to weight, dimension, speed, route, or other restrictions on a public road then you must only use a device that has a truck map installed. Your vehicle specifica-tions must be entered accurately on the device. Use this device as a navigation aid only. Do not follow navigation instructions which may put you or other road users in danger. TomTom accepts no liability for damages resulting from your failure to observe this notice. Proper mounting Do not mount the device in a way that may obstruct your view of the road or your ability to control the vehicle. Do not place the device in an area that may obstruct the deployment of an airbag or of any other safety feature of your vehicle. Addendum
94 Pacemakers Pacemaker manufacturers recommend that a minimum of 15cm / 6 inches be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Guidelines for people with pacemakers:  You should ALWAYS keep the device more than 15cm / 6 inches from your pacemaker.  You should not carry the device in a breast pocket. Other medical devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. Warning for Australia The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. Device care  It is important to take care of your device:  Do not open the casing of your device under any circumstances. Doing so may be dangerous and will invalidate the warranty.  Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners. Rating: DC5V, 1.2A Environmental and Battery information Your device Do not disassemble, crush, bend, deform, puncture, or shred your device. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave the device in a high temperature location, in direct sunlight, in or near a heat source, in a microwave oven or in a pressurised container, and do not expose it to temperatures over 50°C (122°F) or below -20°C (-4°F). Avoid dropping the device. If the device is dropped and you suspect damage, please contact customer support. Use the device only with the chargers, mounts or USB cables provided. For TomTom approved replacements, go to tomtom.com. Operating temperature This device will remain fully operational within the temperature range 32°F / 0°C to 113°F / 45°C. Prolonged exposure to higher or lower temperatures can cause damage to your device and is therefore advised against. Temperatures: Standard operation: 32°F / 0°C to 113°F / 45°C; short period storage: -4°F / -20°C to 122°F / 50°C; long period storage: -4°F / -20°C to 95°F / 35°C. Important: Before you switch on the device, let the device acclimatise to the standard operation temperature range for at least 1 hour. Do not use the device outside of this temperature range. Device battery (Non-replaceable) This product contains a lithium polymer battery.
95 Do not modify or re-manufacture the battery. Do not attempt to insert foreign objects into the battery, or immerse or expose to water or other liquids. Do not expose the battery to fire, explosion or other hazard. Do not short circuit a battery or allow metallic conductive objects to contact battery terminals. Do not attempt to replace or remove the battery yourself unless the user manual clearly indicates that the battery is user replaceable. User replaceable batteries must only be used in systems for which they are specified. Caution: Risk of explosion if the battery is replaced by an incorrect type. If you have a problem with the battery, please contact TomTom Customer Support. The stated battery life is the maximum possible battery life which is based on an average usage profile and can only be achieved under specific atmospheric conditions. To prolong the battery life, keep the device in a cool, dry place and follow the tips specified in this FAQ: tomtom.com/batterytips. Charging will not occur at temperatures below 32°F / 0°C or over 113°F / 45°C. Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not attempt to pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. WEEE – e-waste disposal In the EU/EEA, this product is marked with the wheelie bin symbol on its body and/or packaging as required by Directive 2012/19/EU (WEEE). This product shall not be treated as household waste or be disposed of as unsorted municipal waste. You can dispose of this product by returning it to the point of sale or bringing it to your local municipal collection point for recycling. Outside of the EU/EEA, the wheelie bin symbol may not have the same meaning. More information about national recycling options can be requested from a responsible local authority. It is the responsibility of the end user to comply with local law when disposing of this product. Triman logo Declarations of Conformity (EU) To view the Declarations of Conformity for all TomTom products, see: http://www.tomtom.com/en_gb/legal/declaration-of-conformity/
96 Certification for Australia This product displays the Regulatory Compliance Mark (RCM) to show that it complies with relevant Australian regulations. Warning for Australia The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. Certification for New Zealand This product displays R-NZ to show it complies with relevant New Zealand regulations. Customer support contact (Australia and New Zealand) Australia: 1300 135 604 New Zealand: 0800 450 973 Customer support contact (Asia) Malaysia 1800815318 Singapore 8006162269 Thailand 0018006121008 Indonesia 0018030612011 TomTom MyDrive app This device is compatible with the TomTom MyDrive mobile application which may be downloaded from tomtom.com/mydrive-app. The use of the TomTom MyDrive mobile application on your smartphone and any integration with your product will require that your smartphone has a wireless data service plan provided by a third party wireless service carrier. The procurement of and all charges associated with such a connectivity plan are your responsibility. TomTom shall not be liable for any costs or expenses associated with such network connectivity plan (such as the data charges or possible tethering fees which may be imposed by your carrier). Any changes to the availability or reliability of the network connection may impact the operation of certain TomTom services which may be offered on this device. Legal terms For information regarding how TomTom uses your data and personal information, visit tomtom.com/privacy. Please see tomtom.com/legal for general terms and conditions including the limited warranty, end user licence agreements and additional copyrights applying to this product, embedded software and services. The software included in this product contains copyrighted software that is licensed under the GPL. A copy of that licence can be viewed in the Third Party Licences section. You can obtain the complete corresponding source code from us for a period of three years after our last shipment of this product. For more information, visit tomtom.com/gpl or contact your local TomTom customer support team at tomtom.com/support. Upon request, we will send you a CD with the corresponding source code.
97 Great care was taken in preparing this document. Constant product development may mean that some information is not entirely up to date. The information in this document is subject to change without notice. TomTom reserves the right to update, change and improve its products and materials without obligation of notice. For updated and additional information, please visit the TomTom website at tomtom.com. TomTom shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the performance or use of this document. This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom N.V. Model numbers TomTom GO Basic: 4BA53, 4BA63 CE mark and Radio Equipment Directive for TomTom GO This device can be used in all EU Member States. The frequency bands and the maximum radio frequency emission power in which this device operates are as follows: Model Frequency band (Bluetooth) (MHz) Maximum radio frequency emission power (dBm) Frequency band (WiFi) (MHz) Maximum radio frequency emission power (dBm) 4BA53 2402 - 2480 5.5 2412 – 2472 19 4BA63 2402 - 2480 5.5 2412 – 2472 19 Hereby, TomTom declares that the radio equipment type TomTom GO Basic GPS Navigation system is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.tomtom.com/en_gb/legal/declaration-of-conformity/ THIS WIRELESS DEVICE MODEL MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO WAVES WHEN USED AS DIRECTED IN THIS SECTION This GPS Navigation System is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Council of the European Union. The SAR limit recommended by The Council of the European Union is 2.0W/kg averaged over 10 grams of tissue for the body (4.0 W/kg averaged over 10 grams of tissue for the extremities - hands, wrists, ankles and feet). Tests for SAR are conducted using standard operating positions specified by the EU council with the device transmitting at its highest certified power level in all tested frequency bands.
98 Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled by the Government of the United States of America, which is solely responsible for its availability and accuracy. GLONASS is operated and controlled by the Government of Russia, which is solely responsible for its availability and accuracy. Changes in GPS or GLONASS availability and accuracy, or in environmental conditions, may impact the operation of this device. TomTom disclaims any liability for the availability and accuracy of GPS or GLONASS. Safety messages Important! Read before use! Death or serious injury could result from failure or partial failure to follow these warnings and instructions. Failure to properly set up, use, and care for this device can increase the risk of serious injury or death, or damage to the device. Use with care warning It is your responsibility to use best judgment, due care and attention when using this device. Don't allow interaction with this device to distract you while driving. Minimise the time spent looking at the device screen while driving. You are responsible for observing laws that limit or prohibit the use of mobile phones or other electronic devices, for example, the requirement to use hands-free options for making calls when driving. Always obey applicable laws and road signs, especially those relating to your vehicle’s dimensions, weight and payload type. TomTom does not guarantee the error-free operation of this device nor the accuracy of route suggestions provided and shall not be liable for any penalties arising from your failure to comply with applicable laws and regulations. Notice for oversized/commercial vehicles Devices without a truck map installed will not provide appropriate routes for oversized/commercial vehicles. If your vehicle is subject to weight, dimension, speed, route, or other restrictions on a public road then you must only use a device that has a truck map installed. Your vehicle specifica-tions must be entered accurately on the device. Use this device as a navigation aid only. Do not follow navigation instructions which may put you or other road users in danger. TomTom accepts no liability for damages resulting from your failure to observe this notice. Proper mounting Do not mount the device in a way that may obstruct your view of the road or your ability to control the vehicle. Do not place the device in an area that may obstruct the deployment of an airbag or of any other safety feature of your vehicle. Addendum
99 Pacemakers Pacemaker manufacturers recommend that a minimum of 15cm / 6 inches be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Guidelines for people with pacemakers:  You should ALWAYS keep the device more than 15cm / 6 inches from your pacemaker.  You should not carry the device in a breast pocket. Other medical devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. Device care  It is important to take care of your device:  Do not open the casing of your device under any circumstances. Doing so may be dangerous and will invalidate the warranty.  Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners. Special Note Regarding Driving in California, Minnesota and Other States California Vehicle Code Section 26708 which applies to those driving within the State of California restricts the mounting of a navigation device on the windshield to a seven-inch square in the lower corner of the windshield farthest removed from the driver or in a five-inch square in the lower corner of the windshield nearest to the driver and outside of an airbag deployment zone, if the system is used only for door-to-door navigation while the motor vehicle is being operated. Drivers in California should not mount the device on their side or rear windows. Minnesota State Legislature Statutes Section 169.71, subdivision 1, section 2 restricts any person driving within the State of Minnesota from driving with a device suspended between the driver and the windshield. Many other states have enacted laws which restrict the placement of any object or material on the windshield, side or rear window that obstructs a driver's clear view of the road. It is incumbent upon the driver to be aware of all applicable laws and to place the device in such a manner that will not interfere with his/her driving. TomTom Inc. bears no responsibility for and hereby disclaims all liability for any fines, penalties or damage incurred by a driver for violations of the law. While driving in any state with windshield mounting restrictions, TomTom recommends using the supplied Adhesive Mounting Disk or purchasing an alternative mounting system (e.g. dashboard or air vents). See tomtom.com for more information about these mounting options. Rating: DC5V, 1.2A How TomTom uses your information Information regarding the use of personal information can be found at: tomtom.com/privacy.
100 Environmental and Battery information Your device Do not disassemble, crush, bend, deform, puncture, or shred your device. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave the device in a high temperature location, in direct sunlight, in or near a heat source, in a microwave oven or in a pressurised container, and do not expose it to temperatures over 50°C (122°F) or below -20°C (-4°F). Avoid dropping the device. If the device is dropped and you suspect damage, please contact customer support. Use the device only with the chargers, mounts or USB cables provided. For TomTom approved replacements, go to tomtom.com. Operating temperature This device will remain fully operational within the temperature range 32°F / 0°C to 113°F / 45°C. Prolonged exposure to higher or lower temperatures can cause damage to your device and is therefore advised against. Temperatures: Standard operation: 32°F / 0°C to 113°F / 45°C; short period storage: -4°F / -20°C to 122°F / 50°C; long period storage: -4°F / -20°C to 95°F / 35°C. Important: Before you switch on the device, let the device acclimatise to the standard operation temperature range for at least 1 hour. Do not use the device outside of this temperature range. Device battery (Non-replaceable) This product contains a lithium polymer battery. Do not modify or re-manufacture the battery. Do not attempt to insert foreign objects into the battery, or immerse or expose to water or other liquids. Do not expose the battery to fire, explosion or other hazard. Do not short circuit a battery or allow metallic conductive objects to contact battery terminals. Do not attempt to replace or remove the battery yourself unless the user manual clearly indicates that the battery is user replaceable. User replaceable batteries must only be used in systems for which they are specified. Caution: Risk of explosion if the battery is replaced by an incorrect type. If you have a problem with the battery, please contact TomTom Customer Support. The stated battery life is the maximum possible battery life which is based on an average usage profile and can only be achieved under specific atmospheric conditions. To prolong the battery life, keep the device in a cool, dry place and follow the tips specified in this FAQ: tomtom.com/batterytips. Charging will not occur at temperatures below 32°F / 0°C or over 113°F / 45°C. Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not attempt to pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. WEEE e-waste disposal This product is marked with the crossed-out wheeled-bin symbol on its body and/or packaging to show that it shall not be treated as household waste or be disposed of as unsorted municipal waste. Please dispose of this product by making use of local e-waste collection point or other recycling facility or by returning it to the point of sale. More information about national recycling options can be requested from the responsible local authority in your country.
101 USA Specific Absorption Rate (SAR) compliance THIS WIRELESS DEVICE MODEL MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO WAVES WHEN USED AS DIRECTED IN THIS SECTION This GPS Navigation System is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government, Industry Canada of the Canadian Government (IC). The SAR limit recommended by the Federal Communications Commission (FCC) of the U.S. Government, Industry Canada of the Canadian Government (IC) is 1.6W/kg averaged over 1 gram of tissue for the body (4.0 W/kg averaged over 10 grams of tissue for the extremities - hands, wrists, ankles and feet). Tests for SAR are conducted using standard operating positions specified by FCC/IC with the device transmitting at its highest certified power level in all tested frequency bands. FCC information for the user THE DEVICE COMPLIES WITH PART 15 OF THE FCC RULES Federal Communications Commission (FCC) Statement This equipment radiates radio frequency energy and if not used properly - that is, in strict accordance with the instructions in this manual - may cause interference to radio communications and television reception. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
102 Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cable and connectors to reduce the possibility of causing radio and television interference. Shielded cables, suitable for the product range, can be obtained from an authorized dealer. If the user modifies the equipment or its peripherals in any way, and these modifications are not approved by TomTom, the FCC may withdraw the user’s right to operate the equipment. For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: "How to Identify and Resolve Radio-TV Interference Problems". This booklet is available from the US Government Printing Office, Washington, DC 20402. Stock No 004-000-00345-4. FCC ID: S4L4BA53, S4L4BA63 IC: 5767A-4BA53, 5767A-4BA63 FCC RF Radiation Exposure Statement The transmitters within this device must not be co-located or operating in conjunction with any other antenna or transmitter. ISED RF Exposure Guidance Statement (in English) In order to comply with FCC / ISED RF exposure requirements, this device must be installed at least 20 cm away from the human body at all times. ISED RF Exposure Guidance Statement (in French) Afin de se conformer aux exigences d'exposition RF FCC / ISED, cet appareil doit être installé pour fournir au moins 20 cm de séparation du corps humain en tout temps. FCC Country Code Selection The Country Code Selection feature is disabled for products marketed in the US or Canada. Per FCC regulations, all Wi-Fi products marketed in US must be fixed to US operation channels only. Location of FCC ID and IC ID information on your device The FCC ID and IC ID can be found on the bottom of your device. Exposure limits This device complies with radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation. Limites d'exposition Cet équipement est conforme aux limites d'exposition aux rayonnements définies pour un environnement non contrôlé. Afin d'éviter tout dépassement potentiel des limites d'exposition aux frèquences radio, tout être humain doit rester éloigné d'au moins 20cm (8 puces) de l'antenne dans le cadre d'un fonctionnement normal. Emissions information for Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:  This device may not cause interference.  This device must accept any interference, including interference that may cause undesired operation of the device. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B)
103 The Country Code Selection feature is disabled for products marketed in the US or Canada. Equipment is certified to the requirements of RSS-247 for 2.4-GHz. Informations relatives aux émissions au Canada Son fonctionnement est soumis aux deux conditions suivantes :  Cet appareil ne doit pas creér d'interférences nuisibles.  Cet appareil doit tolérer les interférences reçues, notamment celles susceptibles de provoquer un fonctionnement indésiable. Son utilisation est autorisée dans la mesure où l'appareil ne provoque pas d'interférences nuisibles. Cet appareil numérique de classe B est conforme aux règlements canadiens ICES-003. La fonction de sélection du code de pays est désactivée pour les produits distribués aux États-Unis ou au Canada. L'équipement est certifié conforme aux exigences de la norme RSS-210 pour le 2,4 GHz. IMPORTANT NOTE IC Radiation Exposure Statement:  This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncon-trolled environment.  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.  End users must follow the specific operating instructions for satisfying RF exposure compli-ance. To maintain with IC RF exposure compliance requirements please follow operation in-struction as documented in this manual. REMARQUE IMPORTANTE Déclaration d'exposition aux rayonnements IC :  Cet équipement est conforme aux limites d'exposition aux rayonnements définies par la norme IC RSS-102 pour un environnement non contrôlé.  Cet appareil et son ou ses antenne(s) ne doivent pas être placés à proximité d'un autre émetteur ou d'une autre antenne, ou manipulés simultanément avec ces derniers. Additional information TomTom MyDrive app This device is compatible with the TomTom MyDrive mobile application which may be downloaded from tomtom.com/mydrive-app. The use of the TomTom MyDrive mobile application on your smartphone and any integration with your product will require that your smartphone has a wireless data service plan provided by a third party wireless service carrier. The procurement of and all charges associated with such a connectivity plan are your responsibility. TomTom shall not be liable for any costs or expenses associated with such network connectivity plan (such as the data charges or possible tethering fees which may be imposed by your carrier). Any changes to the availability or reliability of the network connection may impact the operation of certain TomTom services which may be offered on this device. Responsible party in North America TomTom, Inc., 2400 District Avenue, Burlington, MA 01803, Tel: 866 486-6866 option 1 (1-866-4-TomTom)
104 Terms and Conditions: Limited warranty and EULA Our terms and conditions, including our limited warranty and end user licence terms apply to this product. Visit tomtom.com/legal. This document Great care was taken in preparing this document. Constant product development may mean that some information is not entirely up to date. The information is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the performance or use of this document. This document may not be copied without the prior written consent from TomTom N.V. Model numbers TomTom GO Basic: 4BA53, 4BA63 Accessories supplied with this device  Magnetic Mount  Car charger with TMC traffic receiver if applicable to your country  USB cable  Quick Start Guide
105 © 1992 - 2018 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of TomTom N.V. or one of its subsidiaries. The software included in this product contains copyrighted software that is licensed under the GPL. A copy of that licence can be viewed in the Licence section. You can obtain the complete corresponding source code from us for a period of three years after our last shipment of this product. For more information, visit tomtom.com/gpl or contact your local TomTom customer support team at tomtom.com/support. Upon request, we will send you a CD with the corresponding source code. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TomTom is under licence. Other trademarks and trade names are those of their respective owners. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. Apple, the Apple logo and Siri are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. registered in the U.S. and other countries. Google Now, Google Play and the Google Play logo are trademarks of Google LLC. microSD Logo is a trademark of SD-3C, LLC. Copyright notices

Navigation menu