Tong Lung Metal Industry PLU-BT KEYPAD ELECTRONIC BLE DEADBOLT LOCK User Manual Manual
Tong Lung Metal Industry Co.,Ltd. KEYPAD ELECTRONIC BLE DEADBOLT LOCK Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4154565 |
| Application ID | YGnSJDxoqgpN8fvlbCjrJQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 298.15kB (3726915 bits) |
| Date Submitted | 2019-01-31 00:00:00 |
| Date Available | 2019-02-10 00:00:00 |
| Creation Date | 2019-01-21 16:40:19 |
| Producing Software | Corel PDF Engine Version 15.2.0.686 |
| Document Lastmod | 2019-01-21 16:40:19 |
| Document Title | Manual |
| Document Creator | CorelDRAW X5 |
| Document Author: | Kai Hsu_許世凱 |
PLU-BT Please download “BLE Smart Lock” on Google Play or Lock / Unlock With Paired Mobile Phone Pairing With Bluetooth Lock Bluetooth Settings Manual Connect to Device Connect to Device My locks BLE Lock-PL1 BLE Lock-PL1 Here are your Locks App Store. Open BLE Smart Lock App and select paired lock. Choose a lock to configure Once the installation is completed, turn on the device’s Bluetooth and open “BLE Smart Lock” App to begin pairing. User Name User Name Tony Tony Programming Code ●●●● ●●●● The lock is not set Motor Detect Error Lock Name CONFIRM Home Mail Calendar Photos Camera Maps Clock Weather News Home Notes Favorites BLE Smart Lock Health Settings android app Here are your Locks Choose a lock to configure Nearby locks BLE Lock-PL1 Note : If the password is default value, please change the programming code for locker before pairing. Note : If the password is default value, please change the programming code for locker before pairing. CONNECT Attention: When “The lock is not set” message appears. Please follow the instructions for door handing - so that your lock knows if it is used on a left hand or right hand door. Then proceed with pairing. Connect to Device My lock Wait for the page to scan for Bluetooth locks in range. Locks found will be shown on screen. Select the lock with default name of “BLE Lock-PL1” to continue. Note: Bluetooth scanning time may vary depending on Android manufacturers. Attention: “BLE Lock-PL1” shown in black font means the unit is available. Paired lock names will be shown in red. The default name may vary for other product model. CONFIRM Home CONNECT BLE Smart Lock Home(paired) Programming Code Lock Name ios app Attention: The working range between the lock and your Smartphone is around 16 feet (5m). Nearby locks BLE Lock-PL1 Attention: When “Motor Detect Error” message appears. Bluetooth pairing must be carried out while the lock is in unlocked state. Please first unlock, then proceed with pairing process. Tony Programming Code Connection Note ●●●● Home Signal Strength Always make sure to stand at a close distance from your BLE lock Home CANCEL CONFIRM Note : If the password is default value, please change the programming code for locker before pairing. Home Locked Icon Home Home Bluetooth paring is completed when the lock setting screen displays the following: BLE Lock-PL1 Home Administrator Function Settings User Name Tony Home Programming Code ●●●● Lock Name (Set by user) Go Back Lock Name Home Lock / Unlock Note : If the password is default value, please change the programming code for locker before pairing. CONNECT The GREEN (unlocked) icon means the current status of the lock is "UNLOCKED". Lock Name CONNECT Connect to Device Unlocked Icon Follow the tips, touch lock with mobile phone and select “OK”. This step calibrates the sensor proximity. Please ensure the pairing process is done with mobile phone as close to the lock as possible. Failing to do so will cause sensor distance error and increase safety detection warning area. User Name Home Signal Strength Lock Battery Level Bluetooth signal strength between Smart phone and lock Signal Strength The ORANGE (locked) icon means the current status of the lock is "LOCKED". PLU-BT Bluetooth Authentication Safety Detection Press ”Back” key and exit App. When the smart phone is within 20" (50cm) of the lock and the connection has been established a 10 seconds countdown will begin on the lock. If user does not unlock within 10 seconds by pressing the “Bluetooth” button, five short beeps will sound warning the user that currently mobile phone is within connection distance and they should move out of the 20" (50cm) connection range. Make sure your smart phone is within 12" (30cm) of the lock, then push the top button or touch the screen for touchscreen version on your lock to proceed with Bluetooth authentication. Once authenticated, the mobile phone will send “Unlocked” notification and unlock. Bluetooth authentication time may vary between different Android manufacturers and should not take longer than 5 seconds. Attention: If authentication fails, mobile phone will send “Unlock distance error” notification. Please adjust the distance between mobile phone and lock to within 12" (30cm), and then try again. m) 30c 12" Inside distance Outside distance 20" (50cm) 20" (50cm) Administrator Functions Load paired devices list Delete Paired Device From List Select the Setting icon on the top right corner of the locking setting screen to view paired Bluetooth devices. Administrator’s name appears in red. All other users’ name appear in black. (6 devices max, including the administrator) On “Paired Devices” screen, select the “Edit” button on the top right corner and “Delete” icon will appear. After pressing delete icon, confirm by pressing “OK” on the confirmation screen to delete. Devices Home Home Devices Devices Tony Tony Tony Family-1 Family-1 Family-1 Family-2 Family-2 Family-2 Family-3 Family-3 IOS IOS Problem Unable to find locks on the scan page. Family-3 Delete device「IOS」 Possible Causes Actions (1) Bluetooth not turned on. (2) Batteries are low or dead. (1) IOS system please manually IOS Family-4 CANCEL enable Bluetooth function. (2) Change batteries. CONFIRM “The lock is not set” message appears during pairing process. Door handing has not been set. Please refer to user manual and set door handing first before attempting to pair with the lock. “Motor Detect Error” message appears during pairing process. Lock has not been unlocked. Please turn lock bolt to “Unlocked” state/status, then try the pairing process again. “Lock Has Been Reset” message appears when entering Settings screen in App. (1) The lock has been reset by (1) Please turn lock bolt to Signal Strength Review Usage Log Select administrator device name (in red) to review usage log. Attention: Unlocks made with passwords will show in log as “Code”, but no date and time information will be recorded. Devices REGULATORY COMPLIANCE Home This product complies with standards established by the following regulatory bodies: • Federal Communications Commission (FCC) • Industry Canada Family-1 FCC Family-3 IOS administrator. “Unlocked” state/status, then try the pairing process again. (2) Please consult with the administrator. Records Tony Family-2 other users. (2) User has been deleted by Tony 1207 12:10 Tony 1207 12:16 Family-1 1207 14:03 IOS 1207 14:23 IOS 1207 15:08 Tony 1207 15:15 IOS 1207 16:11 IOS 1207 16:15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IMPORTANT ! Changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Unable to perform one push unlock. (1) Mobile phone is too far (1) Please make sure the mobile from the lock. (2)Lock has been reset. phone is within 12" (30cm)of the lock for one push unlock. (2) Please enter the settings page within the App and make sure the lock had not been reset. Safety detection still beeps warning at distance over 3 feet (1m). Mobile phone was not paired correctly by touching the lock during the pairing process. Please reset lock or contact administrator and delete currently user, then try pairing the lock again to establish safety distance.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Kai Hsu_許世凱 Create Date : 2019:01:21 16:40:19+08:00 Modify Date : 2019:01:21 16:40:19+08:00 Title : XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2019:01:21 16:40:19+08:00 Creator Tool : CorelDRAW X5 Format : application/pdf Creator : Kai Hsu_許世凱 Document ID : uuid:cd289447-5b97-493b-895f-bd5b2b22e2c1 Instance ID : uuid:27edeee2-4fba-4559-9091-7666b6fd4387 Producer : Corel PDF Engine Version 15.2.0.686 Page Count : 4 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools