Tong Lung Metal Industry PLU-BT KEYPAD ELECTRONIC BLE DEADBOLT LOCK User Manual Manual

Tong Lung Metal Industry Co.,Ltd. KEYPAD ELECTRONIC BLE DEADBOLT LOCK Manual

Manual

PLU-BTPlease download “BLE Smart Lock” on Google Play or App Store. Once the installation is completed, turn on the device’sBluetooth and open “BLE Smart Lock” App to begin pairing.Wait for the page to scan for Bluetooth locksin range.Locks found will be shown on screen. Select the lock with default name of“BLE Lock-PL1” to continue. Note: Bluetooth scanning time may vary depending on Android manufacturers.Attention: “BLE Lock-PL1” shown in black font meansthe unit is available.Paired lock names will be shown in red.The default name may vary for other productmodel.Bluetooth Settings Manual Pairing With Bluetooth LockFollow the tips, touch lock with mobile phoneand select “OK”.This step calibrates the sensor proximity.Please ensure the pairing process is done withmobile phone as close to the lock as possible.Failing to do so will cause sensor distance error andincrease safety detection warning area. Bluetooth paring is completed when the locksetting screen displays the following: Please follow the instructions fordoor handing - so that your lockknows if it is used on a left hand orright hand door. Then proceed withpairing. Attention: When “The lock is not set” messageappears.Motor Detect ErrorAttention: When “ ” message appears.Bluetooth pairing must be carried out while thelock is in unlocked state.Please first unlock, then proceed with pairingprocess.HomeHomeSignal StrengthLock / Unlock With Paired Mobile PhoneBLE Smart LockMa il Ca le nd ar P ho to s Ca me raNe wsWe at he rCl oc kMa psBL ESm ar t Lo ckFa vo ri te sNo te sHo meSe tt in gsHe al thOpen BLE Smart Lock App and select pairedlock.Attention: The working range between the lock andyour Smartphone is around 16 feet (5m). Unlocked IconThe GREEN (unlocked) icon means the current statusof the lock is "UNLOCKED".Administrator Function SettingsHome Lock Name (Set by user)Go Back Lock / UnlockLock Battery LevelBluetooth signal strength betweenSmart phone and lockConnect to DeviceBLE Lock-PL1User NameProgramming CodeLock NameTonyHome● ● ● ●CONNECTNote :If the password is default value, please change theprogramming code for locker before pairing.My lockHere are your LocksChoose a lock to configureNearby locksBLE Lock-PL1My locksHere are your LocksChoose a lock to configureNearby locksHome(paired)Connect to DeviceBLE Lock-PL1User NameProgramming CodeLock NameTonyHome● ● ● ● CONNECTNote :If the password is default value, please change theprogramming code for locker before pairing.The lock is not setCONFIRMLocked IconThe ORANGE (locked) icon means the current statusof the lock is "LOCKED".Connect to DeviceBLE Lock-PL1User NameProgramming CodeLock NameTonyHome● ● ● ● CONNECTNote :If the password is default value, please change theprogramming code for locker before pairing.CONFIRMConnection NoteAlways make sure to stand at a closedistance from your BLE lockCANCELConnect to DeviceBLE Lock-PL1User NameProgramming CodeLock NameTonyHome● ● ● ●CONNECTNote :If the password is default value, please change theprogramming code for locker before pairing.Motor Detect ErrorCONFIRMHomeHomeSignal StrengthHomeHomeSignal Strengthios app android app
PLU-BTSafety DetectionBluetooth Authentication 12" (30cm)Administrator FunctionsLoad paired devices listSelect the Setting icon on the top right corner of the locking setting screen to viewpaired Bluetooth devices.Administrator’s name appears in red. All other users’ name appear in black. (6 devices max, including the administrator) Review Usage LogSelect administrator device name (in red) to review usage log. Attention: Unlocks made with passwords will show in log as “Code”, but no date and time information will be recorded. DevicesTonyFamily-1Family-2Family-3IOSWhen the smart phone is within 20" (50cm) of the lock and the connection has been establisheda 10 seconds countdown will begin on the lock.If user does not unlock within 10 seconds by pressing the “Bluetooth” button, five short beepswill sound warning the user that currently mobile phone is within connection distance and theyshould move out of the 20" (50cm) connection range. 20" (50cm)Problem Possible Causes ActionsUnable to find locks on thescan page.“The lock is not set” message appears duringpairing process.“Motor Detect Error” message appears duringpairing process.“Lock Has Been Reset” message appears whenentering Settings screen inApp.Unable to perform one pushunlock.(1) Bluetooth not turned on.(2) Batteries are low or dead.Door handing has not beenset. Lock has not been unlocked.(1) The lock has been reset byother users.(2) User has been deleted byadministrator.(1) Mobile phone is too farfrom the lock.(2)Lock has been reset.Mobile phone was not pairedcorrectly by touching the lockduring the pairing process.(1) IOS system please manuallyenable Bluetooth function.(2) Change batteries.(1) Please turn lock bolt to“Unlocked” state/status, thentry the pairing process again.(2) Please consult with theadministrator.(1) Please make sure the mobilephone is within 12" (30cm)ofthe lock for one push unlock.(2)Please enter the settingspage within the App andmake sure the lock had notbeen reset.Press ”Back” key and exit App.Make sure your smart phone is within 12" (30cm) of the lock, then push the top button ortouch the screen for touchscreen version on your lock to proceed with Bluetooth authentication. Once authenticated, the mobile phone will send “Unlocked” notification and unlock. Bluetooth authentication time may vary between different Android manufacturers and shouldnot take longer than 5 seconds. Attention: If authentication fails, mobile phone will send “Unlock distance error” notification.Please adjust the distance between mobile phone and lock to within12" (30cm), and then try again. Delete Paired Device From ListOn “Paired Devices” screen, select the “Edit” button on the top right corner and “Delete” iconwill appear.After pressing delete icon, confirm by pressing “OK” on the confirmation screen to delete. Inside distance Outside distanceSafety detection still beepswarning at distance over3 feet (1m).Please refer to user manual andset door handing first beforeattempting to pair with the lock.Please turn lock bolt to“Unlocked” state/status, then trythe pairing process again.Please reset lock or contactadministrator and deletecurrently user, then try pairingthe lock again to establishsafety distance. HomeHomeSignal StrengthTonyFamily-1Family-2Family-3IOSDevicesTonyFamily-1Family-2Family-3IOSRecordsHomeTonyTonyFamily-1IOSIOS1207 12:101207 12:161207 14:031207 15:081207 14:23TonyIOSIOS1207 15:151207 16:151207 16:11DevicesTonyFamily-1Family-2Family-3IOSDevicesFamily-3Family-4Delete device IOS「 」CONFIRMCANCELREGULATORY COMPLIANCEThis product complies with standards established by the following regulatory bodies:• Federal Communications Commission (FCC) • Industry CanadaFCCThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.IMPORTANT ! Changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment.20" (50cm)1234675890This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesiredoperation of the device.

Navigation menu