Tonika Electronics Technology TA-304B Bluetooth Speaker User Manual USER manual

Download:
Mirror Download [FCC.gov]
Document ID	2190095
Application ID	3M7EDuDq1vA+pX3oiqwZXQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.77kB (1684572 bits)
Date Submitted	2014-02-14 00:00:00
Date Available	2014-02-14 00:00:00
Creation Date	2014-01-28 15:39:36
Producing Software	pdfFactory Pro 3.51 (Windows XP Professional Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	USER manual.pdf
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	Administrator

TOWER SPEAKER SYSTEM
WITH BLUETOOTH®® WIRELESS
TECHNOLOGY
Owner's Manual
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model: TA-304B
Size: 148.5(W) x 210(H)mm (A5)
1
Insert the small plug from the supplied AC/DC
Adaptor to the DC IN Jack on the unit. Insert the
AC/DC adaptor to a wall outlet having AC 100-240V~,
50/60Hz .
TO DC IN JACK
NOTE: This AC/DC Adaptor is intended to be correctly
orientated in a vertical or floor mount position.
To Wall Outlet
2. Wooden Base
as the figures above.
Supplied screwdriver
1. Assembly the two wooden bases to the bottom of unit by the supplied assembly
screws and screwdriver as the figure above.
1. FM ANT (FM ANTENNA)
2. POWER ON/OFF SWITCH
3. DC IN JACK
4. AUX IN 2 JACKS
5. AUX IN 1 JACK
6.
(BLUE TOOTH) INDICATOR
7. AUX 1 INDICATOR
8. AUX 2 INDICATOR
9. STANDBY/FM INDICATOR
10. SOURCE BUTTON
11. STANDBY ON/OFF BUTTON
12. VOL - (VOLUME DOWN) BUTTON
13. VOL + (VOLUME UP) BUTTON
14. TUNE +/
BUTTON
15. TUNE -/
BUTTON
10
15
14
11
12
13
1
10
1.
Standby ON/OFF BUTTON
6.
(PLAY/PAUSE) BUTTON
2.
(MUTE) BUTTON
7. TUNE +/
BUTTON
3. SOURCE BUTTON
8. VOL (VOLUME) +/- BUTTONS
4. RESET BUTTON
9. TREBLE +/- BUTTONS
5. TUNE -/
10. BASS +/- BUTTONS
BUTTON
BATTERY PRECAUTIONS:
CONNECTION
Connect to External Audio Device with 3.5mm Jack:
Connect to External Video/Audio Device with RCA Jacks:
OPERATIONS:
1. Connected the external Audio or Video/Audio Devices to the unit as previous procedures.
2. Slide the POWER ON/OFF Switch on the rear of unit to ON position to turn the unit to Standby
mode. The Power Indicator will light.
3. Press and hold the
button on the unit or press the
button on the Remote Control to turn on
the unit from Standby mode.
4. Press the SOURCE button on the unit or Remote Control to select input source as desire.
A. If FM (Radio) is selected, STANDBY/FM Indicator will blink:
i. Press the TUNE +/
button repeatedly to search and plays the next available FM station.
ii. Press the TUNE -/
button repeatedly to search and plays the previous available FM station.
iii. To searching the stations from begin. Press the RESET button on the Remote Control to
reset the radio to minimum frequency.
Notes:
The Antenna wire on the rear of unit is for radio reception. If reception is weak, unwound
and extended the wire or relocation the wire to improve the radio reception.
If a stereo FM station was searched, the unit will plays it in stereo mode automatically.
B. If AUX 1 is selected, the AUX 1 Indicator will light. Plays the music in the AUX 1 connected
Audio device as usual.
C. If AUX 2 is selected, the AUX 2 Indicator will light. Plays the video or music in the AUX 2
connected Video/Audio device as usual.
D. If BT (Blue Tooth) is selected, the Indicator will light and blinking. If this is the first time to use
BT or re-pairing the unit to a new BT device, pairing the unit to external BT device as bellows:
i. Power on the external BT device and enter to searching mode.
ii. Start pairing as the on screen instructions on the external BT device.
iii. After paired, the Indicator will stop blinking. (For details pairing procedures, please refer
to the user’s manual of your BT device.).
iv. Plays the music in the paired BT device as usual.
Notes:
When the external BT device searched the unit, our model number “CHT 941” will appears
on the display of external BT device.
Pairing code “0000” may need to enter.
Normal operation after paired:
i. Turn on the BT function of the external BT device.
ii. Power on the unit and selected the input source to BT as previous procedures.
iii. Wait a few seconds until the unit paired to the external BT device automatically. (The
Indicator will stop blinking).
iv. Plays the music in the paired BT device as usual.
5. Press the VOL (Volume) +/- buttons to adjust volume level.
6. Press the
button on the remote control to turn off the sound temporary, press again to turn the
sound back.
7. Press the BASS +/- buttons on the remote control to enhance or reduce the bass level (low audio
frequency) as desire.
8. Press the TREBLE +/- buttons on the remote control to enhance or reduce the treble level (high
audio frequency) as desire.
9. When finished, press and hold the
button on the unit or press the
button on the Remote
Control to turn off (standby) the unit.
NOTE: If long period of time will not use the unit, power off the unit by slide the POWER Switch
to OFF position or unplug the AC/DC Adaptor from the unit and wall outlet.
DC
DC
12V,2A
3V,1 x CR 2025 button cell (Included)
FM 87.5-108 MHz
4 x 4 Ohms, 6 W
Accessories:
1 x Remote Control ( uses 1 x CR 2025 button cell,induded )
1 x AC/DC Adaptor ( Input: AC 100-240V~,50/60Hz 1A; Output DC
1 x Audio Connection Cable with 3.5mm Stereo plugs
12V,2A
1 x User's Manual
2 x Wooden Stand
6 x Assembly Screws
1 x Screwdriver
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
10
LIMITED WARRANTY
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $12.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:service@craigelectronics.com
Printed in China
CHT941_WC_E0FG1_V0US
Size: 148.5(W) x 210(H)mm (A5)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Title                           : USER manual.pdf
Author                          : Administrator
Creator                         : pdfFactory Pro www.pdffactory.com
Producer                        : pdfFactory Pro 3.51 (Windows XP Professional Chinese)
Create Date                     : 2014:01:28 15:39:36+08:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools