Top Victory Electronics CM350S COLOR MONITOR User Manual D350S e

Top Victory Electronics (Taiwan) Co Ltd COLOR MONITOR D350S e

Exhibit 7 Users Manual

Download: Top Victory Electronics CM350S COLOR MONITOR User Manual D350S e
Mirror Download [FCC.gov]Top Victory Electronics CM350S COLOR MONITOR User Manual D350S e
Document ID102665
Application ID7FCGsesQw3ZS5JMGGQq0dw==
Document DescriptionExhibit 7 Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize31.25kB (390573 bits)
Date Submitted2000-06-01 00:00:00
Date Available2000-06-19 00:00:00
Creation Date2000-06-01 14:12:02
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod0000-00-00 00:00:00
Document Title穨D350S-e.PDF
Document Creator穨Microsoft Word
Document Author: 穨SHARON

Your Work Never Looked Better
4V/4Vlr
4VA/4VlrA
USER MANUAL
TABLE OF CONTENTS
ENGLISH
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2 DEUTSCH
BEFORE YOU OPERATE THE MONITOR ---------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS --------------------------
3 FRANÇAIS
OPERATING INSTRUCTIONS ------------------------------------GENERAL INSTRUCTIONS ---------------------------------HOW TO ADJUST A SETTING -----------------------------ADJUSTING THE PICTURE ---------------------------------POWER MANAGEMENT FEATURE ----------------------PLUG AND PLAY ------------------------------------------------
6 ITALIANO
ESPAÑOL
TECHNICAL SUPPORT(FAQ) -------------------------------------10
APPENDIX ---------------------------------------------------------------11
SPECIFICATIONS -------------------------------------------11-12
FACTORY PRESET TIMING TABLE ---------------------- 13
CONNECTOR PIN ASSIGNMENT ------------------------- 13
LIMITED THREE-YEAR WARRANTY ------------------------14-15
Thank you very much for choosing the AOC Color Monitor.
We recommend that you take a few minutes to read carefully through this
brief but comprehensive manual before installing and switching on the
Before
operating
thefor
monitor
please
read Series
this manual
thoroughly.
This
Plug
& Play
Drivers
the AOC
Spectrum
Monitors
are available
manual should be retained for future reference.
at AOC’s Web Site: www.aoc-europe.com
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE :
1.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
2. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the
responsibilities of the user to correct such interference.
As an ENERGY STAR Partner AOC International has determined that this
product meets the ENERGY STAR guidelines for energy efficiency.
WARNING :
To prevent fire or shock hazard, do not expose the monitor to rain or
moisture. Dangerously high voltages are present inside the monitor. Do not
open the cabinet. Refer servicing to qualified personnel only.
PRECAUTIONS
l Do not use the monitor near water, e.g. near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
l Do not place the monitor on an unstable cart, stand, or table. If the
monitor falls, it can injure a person and cause serious damage to the
appliance. Use only a cart or stand recommended by the manufacturer
or sold with the monitor. If you mount the monitor on a wall or shelf, use
a mounting kit approved by the manufacturer and follow the kit
instructions.
l Slots and openings in the back and bottom of the cabinet are provided
for ventilation. To ensure reliable operation of the monitor and to protect it
from overheating, be sure these openings are not blocked or covered.
Do not place the monitor on a bed, sofa, rug, or similar surface. Do not
place the monitor near or over a radiator or heat register. Do not place
the monitor in a bookcase or cabinet unless proper ventilation is
provided.
l The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
l The monitor is equipped with a three-pronged grounded plug, a plug
with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the threewire plug, have an electrician install the correct outlet, or use an adapter
to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
l Unplug the unit during a lightning storm or when it will not be used for
long periods of time. This will protect the monitor from damage due to
power surges.
l Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
l Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
l Do not attempt to service the monitor yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
l To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240V AC, Min. 1.5A.
BEFORE YOU OPERATE THE MONITOR
FEATURES
FEATURES
•
•
•
•
•
•
35.5cm(14”) Color Monitor
Crisp, Clear Display for Windows
Supports Resolutions up to 1024 × 768
Power Management
Ergonomic Design (MPR II Approved for 4Vlr/4VlrA)
Space Saving, Compact Case Design
FEATURES
CHECKING THE CONTENTS OF THE MONITOR PACKAGE
The product package should include the following items:
1. Monitor
2. Owner's Manual
3. Power Cord ( Refer to the "Using the right power cord" statement )
4. Swivel Base
5. Audio Cable ( For 4VA/4VlrA only )
INSTALLATION INSTRUCTIONS
SWIVEL BASE
To attach the swivel base to the monitor, do the following:
• Carefully turn the monitor on its side or upside down. ( see figure 1 )
• Locate the cavities at the bottom front of the monitor.
• Insert the pegs on the swivel base into these cavities. Push the swivel
base forward until the swivel base locks in place.
• To remove the swivel base, hold the bottom of the swivel base, then
push it out.
Figure 1
Installing and Removing the Swivel Base
POWER CORD
Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
3. Connect the power cord into your monitor’s power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC, depending on the type of power cord supplied with your monitor.
CONTROLS AND CONNECTORS
VIDEO CABLE
Connecting the Video Cable: the monitor comes with a built-in video cable.
Plug the signal cable′s 15-pin connector into the computer's video port and
tighten the two screws on the cable connector. (see figure 2)
Caution: Don’t bend the signal cable, otherwise it will break the inner
wire.
Connecting the Power Cord: Plug the power cord into the monitor's AC
power jack. Then plug the power cord into a grounded AC outlet, ULapproved power strip, or the power output socket on your PC.
Caution: If the AC outlet is not grounded, install the proper grounding
adapter (not supplied).
Connecting the Earphone Cable ( 4VA/4VlrA only ): Plug earphone cable
into earphone output jack.
Connecting the Audio Cable ( 4VA/4VlrA only ): Plug one end of the audio
cable into the computer’s multi-media (or sound) card′s audio output and
the other end into the monitor's audio input.
Figure 2
Connecting Cables
1. AC Inlet
2. Earphone (4VA/4VlrA only)
3. Audio In (4VA/4VlrA only)
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The power switch is located at front panel of the monitor. Press the power
switch to turn the monitor on or off. The other control knobs are located at
the base of the monitor (See Figure 3). By changing these settings, the
picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• To turn the monitor on, press the POWER switch to ON position. The
power indicator will light up.
• Your monitor features a unique quick switch system which provides a
picture within seconds after the monitor is switched on.
10
11
12
13
Figure 3
External Control Knob
EXTERNAL CONTROLS
1.
2.
3.
4.
5.
Switch:
Power On/Off Switch
LED
Up Key
Down Key
Function Key
6.
7.
8.
9.
10.
Functions:
Contrast
Brightness
H-Size
H-Center
V-Size
11.
12.
13.
V-Center
Pincushion
Trapezoid
NOTES
•
•
•
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts , or in a place subject to direct sunlight , or
excessive dust or mechanical vibration or shock.
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally
packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.
HOW TO ADJUST A SETTING
1. Press the knob, the green LED lights and the power is ON.
Press this knob again, the green LED disappears and the power is OFF.
2. When press the “FUNC” key, the LED will flash to indicate the function
has been selected.
3. When function has been selected, press
or
to adjust picture
image.
4. Press the Up or Down key to get the optimal volume for the multimedia
model only. The most left LED will flash to indicate the adjustable levels
have reached to the maximum or minimum.
5. If you press the Func. & Down keys simultaneously it functions as an
audio mute, and press Up or Down key to release audio function for
multimedia model only.
ADJUSTING THE PICTURE
The description for function control LEDS
1.
CONTRAST
2.
BRIGHTNESS Adjust the picture brightness.
3.
H-SIZE
Adjust the picture’s horizontal size.
4.
H-CENTER
Adjust the horizontal position of the picture.
5.
V-SIZE
Adjust the picture’s vertical size.
6.
V-CENTER
Adjust the vertical position of the picture.
7.
PINCUSHION
Adjust the pincushion and barrel.
8.
TRAPEZOID
Adjust the picture’s trapezoid distortion.
RECALL
To recall original factory preset mode.
9.
Adjust the picture contrast.
POWER MANAGEMENT FEATURE
The power management feature of this product complies with every power
saving requirements of ENERGY STAR and VESA DPMS when activated, it
automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS
computer. There are three power management modes available, these are
described below. The required settings, including the timer setting, should
be made by the computer.
• Stand-by Mode
When the H-sync signal from the computer is off, the monitor enters into
Stand-by Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Stand-by Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
• Suspend Mode
When the V-sync signal from the computer is off, the monitor enters into
Suspend Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Suspend Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
• Active-off Mode
When both the H and V sync signals form the computer are off, the
monitor enters into Active-off Mode which reduces the power
consumption to less than 8W. The screen becomes dark, and the power
indicator turns to orange. From Active-off Mode, the screen reappears
instantaneously when the keyboard or the mouse is touched again.
•
The power-saving mode can be indicated by the light-emitting diode
(LED) on the front panel:
Signal
Power
Mode
Cable H-Sync V-Sync Video Indicator Consumption
On*
Attached
Yes
Yes
Active
Green
≤ 90 W
Stand-by Attached
No
Yes
Blank Orange
≤ 15 W
Suspend Attached
Yes
No
Blank Orange
≤ 15 W
Off
Attached
No
No
Blank Orange
≤ 8W
FEATURES
Green monitor
• The monitor has a power saving function that conforms to the VESA
DPMS standard. This feature will only work if your PC is a green PC. This
feature is similar to a screen saver, except that your monitor will turn it off
instead of activating the screen saver.
To activate this feature in Windows ® 98 :
In Windows ® 98, this feature can be activated and customized under the
screen saver setting of the display properties.
1. Right click on the desktop and choose Properties.
2. Click on the tab that says Screen Saver. If your system supports Green
PC, there will be a section entitled “Energy Saving Features of Monitor.”
If there isn’t a section like that, then your PC does not support Green
Monitor. The monitor will behave just like a normal monitor, so you will
have to turn it off manually to save energy.
3. In the “Energy Saving Features of Monitor” sections are two boxes,
Standby and Shut off. To activate either one, click the box next to each
one.
4. You can specify the amount of inactive time before your monitor enters
standby mode or shuts off.
10
PLUG AND PLAY
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of its
identity and, depending on the level of DDC used, communicate additional
information about its display capabilities. The communication channel is
defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that
continuously transmits EDID information. The DDC2B is a bidirectional data
channel based on the I²C protocol. The host can request EDID information
over the DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO
VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE
PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
This monitor meets the Power Management standards as set by the Video
Electronics Standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees ( NUTEK ). This feature is designed to conserve electrical
energy by reducing power consumption when there is no video input signal
present. When there is no video input signal this monitor, following a timeout period, will automatically switch to an OFF mode. This reduces the
monitor's internal power supply consumption. After the video input signal is
restored, full power is restored and the display is automatically redrawn. The
appearance is similar to a "Screen Saver" feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or
clicking the mouse.
USING THE RIGHT POWER CORD :
The accessory power cord for the Northern American region is the wallet
plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage
rating for the power cord shall be 125 volts AC.
Supplied with units intended for connection to power outlet of personal
computer: Please use a cord set consisting of a minimum No. 18 AWG, type
SJT or SVT three conductors flexible cord. One end terminates with a
grounding type attachment plug, rated 10A, 250V, CEE-22 male
11
configuration. The other end terminates with a molded-on type connector
body, rated 10A, 250V, having standard CEE-22 female configuration.
12
TECHNICAL SUPPORT (FAQ)
Problem & Question
Power LED is not on
No Plug & Play
No picture
Picture is fuzzy
Picture bounces or a wave
pattern is present in the picture
Monitor is stuck in “Power
Saving Mode”
Missing one of the primary
colors (RED, GREEN, or
Possible Solution
*Check if the Power Switch is in the ON
position
*Power Cord should be connected
*Check if the PC System is Plug & Play
compatible
*Check if the Video Card is Plug & Play
compatible
*Check if the D-15 plug pin of Video
Cable is bent
*Make sure the AOC Monitor Drivers are
installed
(AOC Monitor Drivers are available at:
www.aoc-europe.com)
*Computer Power Switch should be in the
ON position
*Computer Video Card should be snugly
seated in its slot
*The Signal Cable should be completely
connected to the computer
*Check the color of the Power LED
indicator. If it is orange, then the monitor
and the PC system are in power-saving
mode. You need press your keyboard or
move the mouse to reactivate the
system.
*Adjust the Contrast and Brightness
Controls.
*Move electrical devices that may cause
electrical interference.
*Make sure monitor’s video cable is
properly connected to the computer.
*Inspect monitor’s video cable and make
sure none of the pins are bent.
*Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS
LOCK LED. The LED should either turn
ON or OFF after hitting the CAPS LOCK
key.
*Inspect the monitor’s video cable and
make sure that none of the pins are
13
BLUE)
bent.
14
APPENDIX
SPECIFICATIONS
CRT Size
Viewable Image
Size
Type
Video
Separate Sync.
H./V.- Sync.
H-Frequency
V-Frequency
CRT
35.5cm(14"), 90º deflection,
29mm neck
33.5cm (13.2"), diagonal
0.28mm dot pitch
0.7Vpp, R,G,B Analog
Input
TTL Level
Positive / Negative
Scanning
30kHz - 54kHz
Frequency
50Hz-120Hz
Max. Resolution
1024 x 768
Video Dot Rate
65MHz
Factory Preset mode :
User Programmable mode :
12
Power Source
Universal AC 100 - 240V,
50Hz / 60Hz
Operating
0°C to 40°C ambient
Humidity
10%to 85%relative, non-condensing
Dimensions
Monitor & Base 350(W) × 349(H) × 377(D)mm
Weight
Unit(net)
10.5kgs(net)
Signal Cable:
Attached Mini D-sub 15 Male
350
377
349
(ln mm)
15
•
•
•
•
•
•
•
•
•
•
•
•
Switch
External Controls:
Power On/Off switch
Up/Down Key
Function Key
Contrast
Brightness
H-Size
H-Center
V-Size
V-Center
Pincushion
Trapezoid
Volume (for 4VA/4VlrA only)
DDC1/2B
EPA, VESA DPMS
90 Watts
250mm x 187mm
Rated Power 1W rms
Functions
Plug & Play
Power Management
Power Consumption ( Maximum )
Pre-set Display Area
Audio Output
(for 4VA/4VlrA only)
Regulatory
Compliance
UL, CSA, FDA, FCC, TÜV/GS, CE,
MPR II ( for 4Vlr/4VlrA only )
16
FACTORY PRESET TIMING TABLE
HORIZONTAL
FREQUENCY
VERTICAL
FREQUENCY
STANDARD
RESOLUTION
IBM
720 x 400
31.47kHz
70Hz
VGA
640 x 480
31.47kHz
60Hz
VESA/85
640 x 480
43.3kHz
85Hz
VESA/85
800 x 600
53.67kHz
85Hz
VESA/60
1024 x 768
48.36kHz
60Hz
CONNECTOR PIN ASSIGNMENT
10
11
15
15 - Pin Color Display Signal Cable
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
DESCRIPTION
PIN NO.
DESCRIPTION
9.
10.
11.
12.
13.
14.
15.
NC
Ground
Monitor Ground
DDC-Serial Data
H-Sync
V-Sync / *V-Clk
DDC-Serial Clock
For DDC
Red
Green
Blue
Ground
Ground
R-Ground
G-Ground
B-Ground
17
LIMITED THREE-YEAR WARRANTY*
for
AOC Spectrum Color Monitors sold within Europe
AOC International (Europe) GmbH warrants this product to be free from
defects in material and workmanship for a period of Three (3) years after the
original date of consumer purchase. During this period, AOC International
(Europe) GmbH will, at its option, either repair the defective product with
new or rebuilt parts, or replace it with a new or rebuilt product at no charge
except as *stated below. The defective products that are replaced become
the property of AOC International (Europe) GmbH.
If the product appears to be defective, please contact your local dealer or
refer to the warranty card when attached to the product.
Deliver the product freight pre-paid, along with the dated proof of purchase,
to the AOC Authorized Service Center. If you cannot deliver the product in
person:
•
Pack it in its original shipping container (or equivalent)
•
Put the RMA number on the address label
•
Put the RMA number on the shipping carton
•
Insure it (or assume the risk of loss/damage during shipment)
•
Pay all shipping charges
AOC International (Europe) GmbH is responsible neither for any damage or
loss during inbound transport damage nor to inbound product that was not
properly packaged.
AOC International (Europe) GmbH will pay the return shipping charges
within one of the countries specified within this warranty statement.
AOC International (Europe) GmbH is not responsible for any costs
associated with the transportation of product across international borders.
This includes the international border within the European Union.
* This limited warranty does not cover any losses or damages that occur as
a result of
•
Shipping or improper installation or maintenance
•
Misuse
•
Neglect
•
Any cause other than ordinary commercial or industrial application
•
Adjustment by non-authorized source
•
Repair, modification, or installation of options or parts by anyone
other than an AOC Authorized Service Center
•
Improper environment
•
Excessive or inadequate heating or air conditioning or electrical
powers failures, surges, or other irregularities
18
This limited warranty does not cover any of the product firmware or
hardware that you or any third party have modified or altered; you bear the
sole responsibility and liability for any such modification or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT
(INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD
OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL
DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER
EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR
REMEDIES HEREUNDER ARE SOLELY AND EXCULSIVELY AS STATED
HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER
BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER
THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT
WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT
SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS
OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY
VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY
VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF
THE EUROPEAN UNION.
19
Your Work Never Looked Better
5E/5Elr
5EA/5ElrA
USER MANUAL
TABLE OF CONTENTS
ENGLISH
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2
DEUTSCH
BEFORE YOU OPERATE THE MONITOR ---------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS --------------------------
3 FRANÇAIS
OPERATING INSTRUCTIONS ------------------------------------GENERAL INSTRUCTIONS ---------------------------------HOW TO ADJUST A SETTING -----------------------------ADJUSTING THE PICTURE ---------------------------------POWER MANAGEMENT FEATURE ----------------------PLUG AND PLAY ------------------------------------------------
ESPAÑOL
ITALIANO
TECHNICAL SUPPORT(FAQ) -------------------------------------10
APPENDIX ---------------------------------------------------------------11
SPECIFICATIONS -----------------------------------------11-12
FACTORY PRESET TIMING TABLE -----------------------13
CONNECTOR PIN ASSIGNMENT ------------------------- 13
LIMITED THREE-YEAR WARRANTY -----------------------14-15
Thank you very much for choosing the AOC Color Monitor.
We recommend that you take a few minutes to read carefully through this
brief but comprehensive manual before installing and switching on the
20
Before
operating
thefor
monitor
please
read Series
this manual
thoroughly.
This
Plug
& Play
Drivers
the AOC
Spectrum
Monitors
are available
manual should be retained for future reference.
at AOC’s Web Site: www.aoc-europe.com
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE :
3.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
4. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
6. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the
responsibilities of the user to correct such interference.
As an ENERGY STAR Partner AOC International has determined that this
product meets the ENERGY STAR guidelines for energy efficiency.
WARNING :
21
To prevent fire or shock hazard, do not expose the monitor to rain or
moisture. Dangerously high voltages are present inside the monitor. Do not
open the cabinet. Refer servicing to qualified personnel only.
22
PRECAUTIONS
l Do not use the monitor near water, e.g. near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
l Do not place the monitor on an unstable cart, stand, or table. If the
monitor falls, it can injure a person and cause serious damage to the
appliance. Use only a cart or stand recommended by the manufacturer
or sold with the monitor. If you mount the monitor on a wall or shelf, use
a mounting kit approved by the manufacturer and follow the kit
instructions.
l Slots and openings in the back and bottom of the cabinet are provided
for ventilation. To ensure reliable operation of the monitor and to protect it
from overheating, be sure these openings are not blocked or covered.
Do not place the monitor on a bed, sofa, rug, or similar surface. Do not
place the monitor near or over a radiator or heat register. Do not place
the monitor in a bookcase or cabinet unless proper ventilation is
provided.
l The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
l The monitor is equipped with a three-pronged grounded plug, a plug
with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the threewire plug, have an electrician install the correct outlet, or use an adapter
to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
l Unplug the unit during a lightning storm or when it will not be used for
long periods of time. This will protect the monitor from damage due to
power surges.
l Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
l Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
l Do not attempt to service the monitor yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
l To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240V AC, Min. 1.5A.
23
BEFORE YOU OPERATE THE MONITOR
FEATURES
FEATURES
•
•
•
•
•
•
38.1cm(15”) Color Monitor
Crisp, Clear Display for Windows
Supports Resolutions up to 1024 × 768
Power Management
Ergonomic Design (MPR II Approved for 5Elr/5ElrA)
Space Saving, Compact Case Design
FEATURES
CHECKING THE CONTENTS OF THE MONITOR PACKAGE
The product package should include the following items:
3. Monitor
4. Owner's Manual
4. Power Cord ( Refer to the "Using the right power cord" statement )
7. Swivel Base
8. Audio Cable ( For 5EA/5ElrA only )
INSTALLATION INSTRUCTIONS
SWIVEL BASE
To attach the swivel base to the monitor, do the following:
• Carefully turn the monitor on its side or upside down. ( see figure 1 )
• Locate the cavities at the bottom front of the monitor.
• Insert the pegs on the swivel base into these cavities. Push the swivel
base forward until the swivel base locks in place.
• To remove the swivel base, hold the bottom of the swivel base, then
push it out.
Figure 1
Installing and Removing the Swivel Base
24
POWER CORD
Power Source:
4. Make sure the power cord is the correct type that required in your area.
5. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
6. Connect the power cord into your monitor’s power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC, depending on the type of power cord supplied with your monitor.
CONTROLS AND CONNECTORS
VIDEO CABLE
Connecting the Video Cable: the monitor comes with a built-in video cable.
Plug the signal cable′s 15-pin connector into the computer's video port and
tighten the two screws on the cable connector. (see figure 2)
Caution:Don’t bend the signal cable, otherwise it will break the inner wire.
Connecting the Power Cord: Plug the power cord into the monitor's AC
power jack. Then plug the power cord into a grounded AC outlet, ULapproved power strip, or the power output socket on your PC.
Caution: If the AC outlet is not grounded, install the proper grounding
adapter (not supplied).
Connecting the Earphone Cable ( 5EA/5ElrA only ): Plug earphone cable
into earphone output jack.
Connecting the Audio Cable ( 5EA/5ElrA only ): Plug one end of the audio
cable into the computer’s multi-media (or sound) card′s audio output and
the other end into the monitor's audio input.
Figure 2
Connecting Cables
1. AC Inlet
25
2. Earphone (5EA/5ElrA only)
3. Audio In (5EA/5ElrA only)
26
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The power switch is located at front panel of the monitor. Press the power
switch to turn the monitor on or off. The other control knobs are located at
the base of the monitor (See Figure 3). By changing these settings, the
picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• To turn the monitor on, press the POWER switch to ON position. The
power indicator will light up.
• Your monitor features a unique quick switch system which provides a
picture within seconds after the monitor is switched on.
10
11
12
13
Figure 3
External Control Knob
EXTERNAL CONTROLS
1.
2.
3.
4.
5.
Switch:
Power On/Off Switch
LED
Up Key
Down Key
Function Key
6.
7.
8.
9.
10.
Functions:
Contrast
Brightness
H-Size
H-Center
V-Size
27
11.
12.
13.
V-Center
Pincushion
Trapezoid
NOTES
•
•
•
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts , or in a place subject to direct sunlight , or
excessive dust or mechanical vibration or shock.
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally
packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.
HOW TO ADJUST A SETTING
6. Press the knob, the green LED lights and the power is ON.
Press this knob again, the green LED disappears and the power is OFF.
7. When press the “FUNC” key, the LED will flash to indicate the function
has been selected.
8. When function has been selected, press
or
to adjust picture
image.
9. Press the Up or Down key to get the optimal volume for the multimedia
model only. The most left LED will flash to indicate the adjustable levels
have reached to the maximum or minimum.
10. If you press the Func. & Down keys simultaneously it functions as an
audio mute, and press Up or Down key to release audio function for
multimedia model only.
28
ADJUSTING THE PICTURE
The description for function control LEDS
1.
CONTRAST
2.
BRIGHTNESS Adjust the picture brightness.
3.
H-SIZE
Adjust the picture’s horizontal size.
4.
H-CENTER
Adjust the horizontal position of the picture.
5.
V-SIZE
Adjust the picture’s vertical size.
6.
V-CENTER
Adjust the vertical position of the picture.
7.
PINCUSHION
Adjust the pincushion and barrel.
8.
TRAPEZOID
Adjust the picture’s trapezoid distortion.
RECALL
To recall original factory preset mode.
9.
Adjust the picture contrast.
POWER MANAGEMENT FEATURE
The power management feature of this product complies with every power
saving requirements of ENERGY STAR and VESA DPMS when activated, it
automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS
computer. There are three power management modes available, these are
described below. The required settings, including the timer setting, should
be made by the computer.
• Stand-by Mode
When the H-sync signal from the computer is off, the monitor enters into
Stand-by Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Stand-by Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
29
• Suspend Mode
When the V-sync signal from the computer is off, the monitor enters into
Suspend Mode which reduces the power consumption to less than 15W.
The screen becomes dark, and the power indicator turns to orange. From
Suspend Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
• Active-off Mode
When both the H and V sync signals form the computer are off, the
monitor enters into Active-off Mode which reduces the power
consumption to less than 8W. The screen becomes dark, and the power
indicator turns to orange. From Active-off Mode, the screen reappears
instantaneously when the keyboard or the mouse is touched again.
•
The power-saving mode can be indicated by the light-emitting diode
(LED) on the front panel:
Signal
Power
Mode
Cable H-Sync V-Sync Video Indicator Consumption
On*
Attached
Yes
Yes
Active
Green
≤ 90 W
Stand-by Attached
No
Yes
Blank Orange
≤ 15 W
Suspend Attached
Yes
No
Blank Orange
≤ 15 W
Off
Attached
No
No
Blank Orange
≤ 8W
FEATURES
Green monitor
• The monitor has a power saving function that conforms to the VESA
DPMS standard. This feature will only work if your PC is a green PC. This
feature is similar to a screen saver, except that your monitor will turn it off
instead of activating the screen saver.
To activate this feature in Windows ® 98 :
In Windows ® 98, this feature can be activated and customized under the
screen saver setting of the display properties.
5. Right click on the desktop and choose Properties.
6. Click on the tab that says Screen Saver. If your system supports Green
PC, there will be a section entitled “Energy Saving Features of Monitor.”
If there isn’t a section like that, then your PC does not support Green
Monitor. The monitor will behave just like a normal monitor, so you will
have to turn it off manually to save energy.
7. In the “Energy Saving Features of Monitor” sections are two boxes,
Standby and Shut off. To activate either one, click the box next to each
one.
8. You can specify the amount of inactive time before your monitor enters
standby mode or shuts off.
30
PLUG AND PLAY
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of its
identity and, depending on the level of DDC used, communicate additional
information about its display capabilities. The communication channel is
defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that
continuously transmits EDID information. The DDC2B is a bidirectional data
channel based on the I²C protocol. The host can request EDID information
over the DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO
VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE
PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
This monitor meets the Power Management standards as set by the Video
Electronics Standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees ( NUTEK ). This feature is designed to conserve electrical
energy by reducing power consumption when there is no video input signal
present. When there is no video input signal this monitor, following a timeout period, will automatically switch to an OFF mode. This reduces the
monitor's internal power supply consumption. After the video input signal is
restored, full power is restored and the display is automatically redrawn. The
appearance is similar to a "Screen Saver" feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or
clicking the mouse.
USING THE RIGHT POWER CORD :
The accessory power cord for the Northern American region is the wallet
plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage
rating for the power cord shall be 125 volts AC.
Supplied with units intended for connection to power outlet of personal
computer: Please use a cord set consisting of a minimum No. 18 AWG, type
SJT or SVT three conductors flexible cord. One end terminates with a
grounding type attachment plug, rated 10A, 250V, CEE-22 male
31
configuration. The other end terminates with a molded-on type connector
body, rated 10A, 250V, having standard CEE-22 female configuration.
32
TECHNICAL SUPPORT (FAQ)
Problem & Question
Power LED is not on
No Plug & Play
No picture
Picture is fuzzy
Picture bounces or a wave
pattern is present in the picture
Monitor is stuck in “Power
Saving Mode”
Missing one of the primary
colors (RED, GREEN, or
Possible Solution
*Check if the Power Switch is in the ON
position
*Power Cord should be connected
*Check if the PC system is Plug & Play
compatible
*Check if the Video Card is Plug & Play
compatible
*Check if the D-15 plug pin of Video
Cable is bent
*Make sure the AOC Monitor Drivers are
installed
(AOC Monitor Drivers are available at:
www.aoc-europe.com)
*Computer Power Switch should be in the
ON position
*Computer Video Card should be snugly
seated in its slot
*The Signal Cable should be completely
connected to the computer
*Check the color of the Power LED
indicator. If it is orange, then the monitor
and the PC system are in power-saving
mode. You need press your keyboard or
move the mouse to reactivate the
system.
*Adjust the Contrast and Brightness
Controls.
*Move electrical devices that may cause
electrical interference.
*Make sure monitor’s video cable is
properly connected to the computer.
*Inspect monitor’s video cable and make
sure none of the pins are bent.
*Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS
LOCK LED. The LED should either turn
ON or OFF after hitting the CAPS LOCK
key.
*Inspect the monitor’s video cable and
make sure that none of the pins are
33
BLUE)
bent.
34
APPENDIX
SPECIFICATIONS
CRT Size
Viewable Image
Size
Type
Video
Separate Sync.
H./V.- Sync.
H-Frequency
V-Frequency
CRT
38.1cm(15"), 90º deflection,
29mm neck
35.1cm (13.8"), diagonal
0.28mm dot pitch
0.7Vpp, R,G,B Analog
Input
TTL Level
Positive / Negative
Scanning
30kHz - 54kHz
Frequency
50Hz-120Hz
Max. Resolution
1024 x 768
Video Dot Rate
65MHz
Factory Preset mode :
User Programmable mode :
12
Power Source
Universal AC 100 - 240V,
50Hz / 60Hz
Operating
0°C to 40°C ambient
Humidity
10%to 85%relative, non-condensing
Dimensions
Monitor & Base 360(W) × 362(H) × 387(D)mm
Weight
Unit (net)
11.5kgs ( Net )
Signal Cable:
Attached Mini D-sub 15 Male
360
387
362
(ln mm)
35
•
•
•
•
•
•
•
•
•
•
•
•
Switch
External Controls:
Power On/Off switch
Up/Down Key
Function Key
Contrast
Brightness
H-Size
H-Center
V-Size
V-Center
Pincushion
Trapezoid
Volume (for 5EA/5ElrA only)
DDC1/2B
EPA, VESA DPMS
90 Watts
260mm x 195mm
Rated Power 1W rms
Functions
Plug & Play
Power Management
Power Consumption ( Maximum )
Pre-set Display Area
Audio Output
(for 5EA/5ElrA only)
Regulatory
Compliance
UL, CSA, FDA, FCC, TÜV/GS, CE,
MPR II ( for 5Elr/5ElrA only )
36
FACTORY PRESET TIMING TABLE
HORIZONTAL
FREQUENCY
VERTICAL
FREQUENCY
STANDARD
RESOLUTION
IBM
720 x 400
31.47kHz
70Hz
VGA
640 x 480
31.47kHz
60Hz
VESA/85
640 x 480
43.3kHz
85Hz
VESA/85
800 x 600
53.67kHz
85Hz
VESA/60
1024 x 768
48.36kHz
60Hz
CONNECTOR PIN ASSIGNMENT
10
11
15
15 - Pin Color Display Signal Cable
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
DESCRIPTION
PIN NO.
DESCRIPTION
9.
10.
11.
12.
13.
14.
15.
NC
Ground
Monitor Ground
DDC-Serial Data
H-Sync
V-Sync / *V-Clk
DDC-Serial Clock
For DDC
Red
Green
Blue
Ground
Ground
R-Ground
G-Ground
B-Ground
37
LIMITED THREE-YEAR WARRANTY*
for
AOC Spectrum Color Monitors sold within Europe
AOC International (Europe) GmbH warrants this product to be free from
defects in material and workmanship for a period of Three (3) years after the
original date of consumer purchase. During this period, AOC International
(Europe) GmbH will, at its option, either repair the defective product with
new or rebuilt parts, or replace it with a new or rebuilt product at no charge
except as *stated below. The defective products that are replaced become
the property of AOC International (Europe) GmbH.
If the product appears to be defective, please contact your local dealer or
refer to the warranty card when attached to the product.
Deliver the product freight pre-paid, along with the dated proof of purchase,
to the AOC Authorized Service Center. If you cannot deliver the product in
person:
•
Pack it in its original shipping container (or equivalent)
•
Put the RMA number on the address label
•
Put the RMA number on the shipping carton
•
Insure it (or assume the risk of loss/damage during shipment)
•
Pay all shipping charges
AOC International (Europe) GmbH is responsible neither for any damage or
loss during inbound transport damage nor to inbound product that was not
properly packaged.
AOC International (Europe) GmbH will pay the return shipping charges
within one of the countries specified within this warranty statement.
AOC International (Europe) GmbH is not responsible for any costs
associated with the transportation of product across international borders.
This includes the international border within the European Union.
* This limited warranty does not cover any losses or damages that occur as
a result of
•
Shipping or improper installation or maintenance
•
Misuse
•
Neglect
•
Any cause other than ordinary commercial or industrial application
•
Adjustment by non-authorized source
•
Repair, modification, or installation of options or parts by anyone
other than an AOC Authorized Service Center
•
Improper environment
•
Excessive or inadequate heating or air conditioning or electrical
powers failures, surges, or other irregularities
38
This limited warranty does not cover any of the product firmware or
hardware that you or any third party have modified or altered; you bear the
sole responsibility and liability for any such modification or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT
(INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD
OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL
DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER
EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR
REMEDIES HEREUNDER ARE SOLELY AND EXCULSIVELY AS STATED
HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER
BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER
THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT
WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT
SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS
OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY
VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY
VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF
THE EUROPEAN UNION.
39
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 40
Creator                         : .穨.Microsoft Word
Create Date                     : 2000:06:01 14:12:02
Title                           : .穨.D350S-e.PDF
Author                          : .穨.SHARON
Producer                        : Acrobat PDFWriter 4.0 for Windows
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ARSCM350S

Navigation menu