Top Victory Electronics CM356N User Manual 33501
Top Victory Electronics (Taiwan) Co Ltd 33501
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 33501 |
| Application ID | y0nEMHQhFiPh3PLwQjXf/Q== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.84kB (360554 bits) |
| Date Submitted | 1999-04-21 00:00:00 |
| Date Available | 1999-04-26 00:00:00 |
| Creation Date | 2001-06-27 09:51:40 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-27 09:51:52 |
| Document Title | 33501.pdf |
| Document Author: | VicodinES /CB /TNN |
Page 18 ‘ Top Vimory Electronics (Taiwan) Co., Ltd. 14"! 15" Color Monitor FCC ID. : ARSCM356N EXHIBIT 4 User‘s Manual User's Manual Welcome Congratulations on your purchase of an AOC monitor. Our monitors are made to the strictest ISO-9001 standards and we stand behind every one of them, The high resolution and flicker free refresh rates will relieve your ‘ eyestrain and increase your productivity. You have made a wise investment in this monitor, and we’re sure it will deliver quality performance without straining your budget. If you have any questions or problems with your new monitor, visit our online technical support at www.aocltd.com. Now let’s start setting up your new monitorl! Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver, 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Notice: 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. As an ENERGY STARGPartner AOC lntemntional has determined that this product meets the ENERGY STAR' guidelines for energy efficiency. Warning: To prevent fire or shock hazard, do not expose the monitor to rain or moisture Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only. Contents Packing list ................... _ Precautions ~-n~-—-—---—-»—~~-~--................_..._...._..._.. Installation Instructions _____.._,______,__,______________,____ Swivel Base ~~ Power cord -- Video cable ---------------»----~~_.v._.____.,_.............. Operating Instructions —- General Instructions - How to adjust a setting - - Adjusting the picture --- Features -----._.___ Green monitor Plug and play . Technical Support (FAQ) -----------.................._._.... com? 0000le mun/Hm a u 11 Appendix A — Specifications ................................... 12.13 Appendix B ~ Factory Preset Timing Table .............. 14 Limited Three-Year Warranty ------------------------------ 15. 16 PACKING LIST The product package should include the following items: 1. Monitor 2. Owner's Manual 3, Power Cord ( Refer to the "Using the right power cord" statement) 4. Swivel Base 5, Audio Cable ( For 4VA/4Ver only ) Plug & Play Drivers for the AOC Spectrum Series Monitors are available at AOC’s Web Site: www.aoelld.com f NOTE g : The Audio port is not available till now. Doesn’t provide this port before submitted to FCC. PRECAUTIONS 0 Do not use the monitor near water, eg. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 0 Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance, Use only a can or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf. use a mounting kit approved by the manufacturer and follow the kit instructions. 0 Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, he sure these openings are not blocked or covered Do not place the monitor on a bed, sofa, mg, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided. 0 The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 0 The monitor is equipped with a three-pronged grormded plug, a plug with a third (grounding) pin, This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three- w1re plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug, 0 Unplug the unit during a lightning storm or when it will not he used for long periods of time. This will protect the monitor from damage due to power surges. ' 0 Do not overload power strips and extension cords. Overloading can result in fire or electric shock. 0 Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. 0 Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel. 0 To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. l.SA. INSTALLATION INSTRUCTIONS Swivel Base To attach the swivel base to the monitor, do the following: 0 Carefully turn the monitor on is side or upside down. ( see figure 1 ) Locate the cavmes at the bottom front of the monitor. insert the pegs on the swivel base into these cavities. Push the swivel base forward until the swivel base locks in place. . To remove the swivel base, hold the bottom of the swivel base, then push it out Figure 1 Installing and Removing the Swivel Base Power Cord Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required. ) 3. Connect the power cord into your monitor‘s power input socket, and then plug the other end into a 3-pin AC power outlet, The power cont may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your monitor. Using the Right Power Cord: The accessory power cord for the Northern Americnn region is the wallet plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for the power cord shall be 125 volts AC. Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding type attachment plug, rated lOA, 250V, GEE-22 male configuration. The other end terminates with a molded-on type connector body, rated 10A, 250V, having standard CEE~22 female configuration. Video cable Connecting the Video Cable: the monitor comes with a built-in video cable. Plug the signal cable’s IS-pin connector into the computers video port and tighten the two screws on the cable connector.(see figure 2) Connecting the Power Cord: Plug the power cord into the monitor’s AC power jack. Then plug the power cord into it grounded AC outlet, UL- approved power strip, or the power output socket on your PC. Caution: If the AC outlet is not grounded (only two holes), install the proper grounding adapter (not supplied). Connecting the Earphone Cable (4VA/4VIrA only): Plug earphone cable into earphone output jock. Connecting the Audio Cable (4VA/4Ver only): Plug one end of the audio cable into the computer‘s multi-media (or sound) card’s audio output and the other end into the monitor's audio input. smut mm common you r rm rime mm mm fi- m Err Phone(4VA/4VIrA) I A ': Audio ln(4VA/4Ver) AC lnlcl Figure2 Connecting Cables tr NOTE J : The Audio port is not available till now. Doesn’t provide this port before submitted to FCC, OPERATING INSTRUCTIONS General Instructions The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off, The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. - The power cord should be connected. 0 Connect the video cable from the monitor to the video card. a To turn the monitor on. press the POWER switch to ON position. The power indicator will light up. - Your monitor features a iniique quick switch system which provides a picture within seconds afler the monitor is switched on. cuerAsr amonmzss asizz new“: v—SIZE name- nNcusmoN TIAPHDID function an ur/nown . lECALL m ten rowel oN/urr Figure} External Control Knob Nota . Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. - Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. - For maximum protection, wpackage your monitor as it was originally packed at the factory. 0 To keep the monitor looking new, periodically clean it With a soft cloth. Stubborn stains may he removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet As a safety precaution, always unplug the monitor before cleaning it. How to adjust a setting 1. Press the knob, the green LED lighs and the power is ON. Press this lmoh again, the green LED disappear and the power is OFF. 2. When press the “FU'NC” key, the LED will flash to indicate the functlorr has been selected. When function has been selected, press it) adjust picture image. Press the Up or Down key to get the optimal volume for the multimedia model only. The most lefl LED will flash to indicate the adjustable levels have reached to the maximum or minimum. 5. If you press the Func. & Down keys simultaneously it functions as 3 audio mute, and press Up or Down key to release audio function for multimedia model only. 5)!" Adjusting the picture The description for function control LEDS 1. CONTRAST 0 Adjust the picture contrast 2. BRIGHTNESS 30- Adjust the picture brightness. 3. H-SIZE 5 Adjust the picture‘s horizontal size. 4. H-CENTER @ Adjust the horizontal position of the picture, 5. V-SIZE m Adjust the picture's vertical size. 6. V-CENTER B Adjust the vertical position of the picture. 7. PINCUSHION Adjust the pincushion and barrel . 8. TRAPEZOID Adjust the picture’s trapezoid distortion, 9. RECALL ® + @ To recall original factory preset mode. DE] FEATURES Green monitor The monitor has a power saving function that conforms to the VESA DPMS standard. This feature will only work if your PC is a green PC. This feature is similar to a screen saver, except that your monitor will turn it off instead of activating the screen saver. To activate this feature in Windowsa 95 : In Windows“ 95, this feature can be activated and customized under the screen saver setting of the display properties l. 2. Right click on the deskoup and choose Properties. Click on the tab that says Screen Saver. If your system supports Green PC, there will be a section entitled “Energy Saving Features of Monitor." If there isn’t a section like that, then your PC does not support Green Monitor. The monitor will behave just like a normal monitor, so you will have to turn it off manually to save energy. In the “Energy Saving Features of Monitor” sections are two boxes, Standby and Shut off. To activate either one, click the box next to each MIC. You can specify the amount of inactive time before your monitor enters standby mode or shuts off. The power-saving mode can be indicated by the light-emitting diode (LED) on the front panel: On" Attached Signal Cable HvS c V-S 0 Video Indicator Consum-tion Mode Yes | Blank | Orange Stand-by Attached Suspend Attached Blank Oran 1 e Blank Orange Ofl' Attached THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Power Management standards as set by the Video Electronics Standards Association (V ESA) and/or the United States Environmental Promotion Agency (EPA) and The Swedish Confederation Employees ( NUTEK ). This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present When there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor‘s internal power supply consumption. After the video input signal is restorecL full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse. Plug and play Plug & Play DDCl/ZB Feature This monitor is equipped with VESA DDCl/ZB capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of BBC used, communicate additional information about its d‘mplay capabilities. The communication channel is defined in two levels, BBC] and DDCZB. The DDCl is a unidirectional data channel from the display to the host that continuously transmits EDl'D information. The DDCZB is a bidirectional data channel based on the 12C protocol. The host can request EDID information over the DDC2B channel. Video Cable Pin Assignments: 7- GAGround 15. DDC-Serial Clock 10 TECHNICAL SUPPOR (FAQ) Problem & Qfiticm Possible Solution Power LED is not on ‘Check if the Power Switch is in the ON position ‘Power Cord should be connected No Plug & Play “Check if the PC system is Plug & Pln compatible ‘Check if the Video Card is Plug & Play compatible “Check if the D-lS plug pin of Video Cable is bent ‘Make sure the AOC Monitor Drivers are installed (AOC Monitor Drivers are available at: www.aocltd.con_iL No picture ”Computer Power Switch should be in the ON position ‘Computer Video Card should he snugly seated in is slot ‘The Signal Cable should be completely connected to the computer ‘Check the color of the Power LED indicator. If it is orange, then the monitor and the PC system are in power—saving mode. You need press your keyboard or move the mouse to reactivate the system Picture is fuzzy ‘Adjust the Contrast and Bnghniess Controls. Picture bounces or a wave pa is present in the picture “Move electrical deVlces that may cause electrical interference. Monitor is stuck in “Power Saving Mode” ‘Make sure monitor‘s video cable is properly connected to the computer. ‘lnspect monitor's video cable and make sure none of the pins are bent ‘Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either tllm ON or OFF afier hitting the CAPS LOCK key. - Missing one of the primary col rs \REDt GREEN, or BLUE) ‘Inspect the monitor‘s video cable and make sure that none of the pins are bent. 11 APPENDIX A - SPECIFICATIONS CRT 35.Scm(14"), 90° deflection, 29mm neck, 0.25mm dot pitch non-glare screen. 33.50m 03,2"), diagonal Viewable Image Size Display Color 0 Analog input Unlimited colors Input Signal All filming that meets scanning frequencies Specification ' Video - Analog R, G, B 0.7Vpp positive/75 ohm o Sync. - Horizontal syn Positive/Negative . Vertical sync, : Positive/Negative Synchronization 0 Horizontal SOKHz to 54KHZ automatically 0 Vertical 501-11 tn 120Hz automatically Max. Resolution 1024 x 768 Video bandwidth 65MHz Factory Preset Timings : 7 User mode Timings : 12 Misconvergence - Center 0.3mm Maxi . Corner 0.4mm Max. Power Source Switching mode power supply AC 100-240V, 50Hz/60Hz full range Operating 0°C to 40°C ambient Humidity 10% to 85% relative, non-condensing Weight ll.0Kgs(Net), 12.3Kgs(Gross) Dimensions - Monitor 350(W) X 3520-1) X 370(D)mm o Carton 438(W) >< 3940-1) X 460(D)mm Signal Cable 15 pin mini D-Sub 12 FMTV‘ Aflsoakw External Controls: ‘ Switch - Power Oil/Off switch ‘ - Up/Dowu Key 0 Function Key Functions c Contrast o Brightness c H-Size o H-Center - V-Size . V-Center c Pincushion - Trapezoid - Volume (for 4VA/4Ver only) Plug & Play DDCl/ZB Power management EPA , VESA DPMS Power consumption 90 Watts Max. Preset display area 250mm X 187mm Speaker (for 4VA/4Ver only) a Rate power 2W (per channel) - impedance 15 Q Audio (for 4VA/4Ver only) - Audio output 1W (per channel) 0 Frequency response 100Hz~ lSKHz @ g 3dB - Distortion < 3% - Input sensitivity 0.9Vpp ~ Llep Regulations UL, CSA‘ FDA. FCC, TUV/GS, CE, > , , MPR-II (for 4vh/4vlmnntv) _, \ l TCO (for 4Vlr+ only) } l l 13 l? NOTE J : The Audio port is not available till now. Doesn’t provide this port before submitted to FCC. CRT 38.1cmt15“), 90° deflcclion. 29mm neck, 0.28mm dnl pitch non-glam screen. Viewablc image Size ZSJcm 03.0"), diagonal Displayfiolor - Analog input Unlimited calms lnpul Signal All liming “Isl meets scanning fraqucncies Specificslion - Video - Analug R, G. a 0.7Vpp positive/75 ohm - Syrmi - Horimnml sync.: Pnsilive/Negalive - Vmical sync. : Pnsitive/Negalive Synchronization I Horizontal JOICHz to 541012 automatically ~ Vem’cal 50Hz to 120Hz uulomatically Max. Resolution 1024 x 763 Video bandwidth 65MHz Factory Preset Timlngs : 7 User made Timings : 12 Miswnvcrgcnce 0 Center 0.3mm Maxi - Comer 0.4mm Max. Pawn Samar. Switching mode power supply AC lOO—ZAOV, SDHIJ60HZ full range Oper ' 0°C to 40“C ambient Hum |dity I()% In 35% rchfivc, non-condensing Weight 12.5Kgs(N:(), MASKngmss) Dimensions - Manilor 3600”) l 3640-1) x 385(D)mm 0 Canon 460(W) x 42$(H) x 494(D)mm Signal Cable 15 pin mini D-Sub | Exlemal Controls: | Switch - Power Onlol’fswilch . Up/Dcwn Key 0 Funclion Key Functions v Cuntrasl - Brighhmss 0 ll-Sizc - ll-leer - V»Size - V-Cenler - Pincushinn - Trapezoid ~ Volume (for SEA/SEN only) Plug All Play DDCI/ZB' Power mmagemcnl EPA , VESA ' DBMS Power tonsumpiiun 90 Watts Max. Preset display area 260mm ~;195mm Sptakcr (fur SENSEer only) - Rate power 2W (pcr channel) - Impedance 16!) Audio (for SEA/SEer only) 0 Audio output IW (per channel) 0 qullency response lOOl—lz— ISKH7.@ _-)_— NB - Dwmniun < 3% o luputscnsilivily 0.9Vpp—~ Llep Regulallons UL, CSA, FDA, FCC, TEN/Gs, CE MPRH (rm- SEIdSEIrA guy) TCO (far 5Vlr+ only) ___l_. f NOTE A : The Audio port is not available till now Doesn’t provide this pon before submitted to FCC. APPENDIX B — FACTORY PRESET TIMING TABLE HORIZONTAL mm VESA/75 640 x480 VESA/GO 1024 x 768 751-11 SSHz 46,875KHz 75Hz 48.36KHZ 60Hz 14 LIMITED THREE-YEAR WARRANTY for AOC Color Monitors Including those Sold within the European Countries as Specified AOC International warrants this product to be free from defects in material and Workmanship for a period of three (3) years afler the original date of consumer purchase. During this period, AOC International will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as “stated below. The parts or product that are replaced become the property of AOC International (USA) Ltd. In the USA to Obtain service under this limited warranty, call AOC International for the name of the Authorized Service Center in your area. Deliver the product freight pro-paid, along with the dated proof of purchase, to the AOC Authode Service Center. If you cannot deliver the product in person: 0 Pack it in its original shipping container (or equivalent) 0 Put the RMA number on the address label 0 Put the RMA number on the shipping carton G Insure it (or assume the risk of loss / damage during shipment) 0 Pay all shipping charges AOC International is not responsible for damage to inbound product that was not properly packaged. AOC International will pay the retum shipment charges within one of the countries specified within this warranty statement. AOC International is not responsible for any costs associated with the transportation of product across international borders, This includes the international borders of the countries within this warranty statements. In the United States contact your Dealer or AOC International Customer Service, RMA Department at the toll free number (800) 775-1262. In Canada, Europe ( this warranty is valid in the member countries of the European Community ) Contact your Dealer, Reseller, Distributor or the organization where you obtained your monitor in case of problems during the warranty period in order to receive factory level approved service. In Europe all repairs will be done at AOC Authorized Service Centers similar to the ones in the USA. “ This limited warranty does not cover any losses or damages that occur as a result of: 0 Shipping or improper installation or maintenance 0 Misuse » 0 Neglect 0 Any cause other than ordinary commercial or industrial application 15 0 Adjustment by non-authorized source 0 Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center 0 Improper environment 0 Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities This Ihree-year limited warranty does not cover any of the product’s firmware or hardware that you or any third party have modified or altered; you hear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. AOC INTERNATIONAL‘S OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL'S LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY. STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE, In the United States of America, this limited warranty is only valid for Products purchased in the Continental United States, Alaska, and Hawaii. Outside the United States of America, this limited warranty is only valid for Products purchased in Canada and the member countries of the European Union. 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:27 09:51:40 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 33501.pdf Modify Date : 2001:06:27 09:51:52-04:00 Page Count : 19EXIF Metadata provided by EXIF.tools