TopSeed Technology TSCT-2401 2.4GHz WIRELESS MOUSE User Manual TGM 6000R UserMan

Download:
Mirror Download [FCC.gov]
Document ID	518236
Application ID	3XLCXkyQCqqcPN1ueaaG+Q==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.54kB (481754 bits)
Date Submitted	2005-02-25 00:00:00
Date Available	2005-04-11 00:00:00
Creation Date	2005-02-21 08:29:53
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-02-23 14:30:01
Document Title	TGM-6000R UserMan.PDF
Document Creator	PScript5.dll Version 5.2
Document Author:	Weng

Unpacking
Inserting the batteries
Installing the devices
Connecting a receiver
Turning on the PC
Setting ID Channel
Wireless Mouse
Wireless Keyboard
Notice
Troubleshooting
Make sure that items below are all in the box before you use.
Wireless Keyboard
(2 x AA size batteries)
Type A
Wireless Mouse
(2 x AA size alkaline batteries)
Receiver
Type B
Wireless Mouse/USB Cable
(2 x AA size alkaline batteries)
* Depending on your model, components may vary and look different than
those pictures.
To use wireless keyboard and wireless mouse, you need to insert 2 AA size
alkaline batteries beforehand.
Do not use rechargeable batteries.
For wireless mouse
battery cover
battery
For wireless keyboard
battery cover
battery
Place the wireless mouse/keyboard upside down and remove the cover of each
device off.
Verify +/- directions of the batteries and insert them in each wireless device.
Put on the cover of the wireless mouse and wireless keyboard.
Wireless Mouse/Keyboard User’s Guide
Set the On/Off slide button of wireless mouse to ‘On’ after you finish inserting
batteries.
On/Off slide button
Only use the same type of batteries and replace them at the same time after using
them up.
USB cable only supplies the power to wireless mouse when the mouse has no batteres
in it. tharefore the receiver must be always connected to your PC to transmit its radio
frequency.
Wireless mouse(Type B)
USB Connector
USB cable
Connecting a receiver
Connect the receiver to USB connector.
Receiver
You can use any of USB connectors.
Turning on the PC
Turn on the computer. Check that each wireless device is properly worked with a
receiver.
You set one ID channel for one device before you use wireless keyboard and wireless
mouse. If there are more than 2 wireless mice or keyboards with same ID channel,
they might be interfered each other. Therefore you must set the different ID channels
for each wireless device.
Wireless Mouse
Press Connect button of the receiver for
1 or 2 seconds.
Receiver indicator
Connect button
While the receiver indicator is on, press
the ID change hole of wireless mouse
for a couple of seconds using tool like a
pen within 15 seconds before the light
is off.
ID change hole
If ID setting is changed successfully,
the receiver indicator blinks.
Receiver indicator
Wireless Mouse/Keyboard User’s Guide
Wireless Keyboard
Press Connect button of the receiver for
1 or 2 seconds.
Receiver indicator
Connect button
While the receiver indicator is on, press
the connect hole of wireless keyboard
for a couple of seconds using tool like a
pen within 15 seconds before the light
is off.
If ID setting is changed successfully,
the receiver indicator blinks.
Connect hole
Receiver indicator
When your PC is switched to power-save mode, just click any button or wheel
on your wireless mouse.
Set On/Off slide button of wireless mouse to ‘Off’ while you are not using a
mouse for a while.
Wireless optical mouse can move faster than any other mouse by 800dpi
resolution.
You can adjust the speed of its move by following the instructions.
: Click Start, choose Control panel and double-click Mouse.
Make sure that you place the optical mouse on a mouse pad or white sheet
of paper. Reflective surface, glass and other see-through surfaces inhibit
the ability of optical sensor.
Set the ID channel differently by every devices when you use more than 2
devices in one space. They can move to same directions at the same time.
Because of interference of radio frequency, each wireless device must be
placed in the distance of 2m.
Batteries are empty after 6 month for wireless keyboard and 3 month for
wireless mouse on average. Prepare for spare batteries for quick replacing.
This manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s
authority to operate the equipment.
Wireless Keyboard and mouse do not respond to move.
The receiver is not properly connected to USB port on your computer.
Plug the receiver to another USB port and restart your computer.
Wireless keyboard and mouse do not work properly.
Wireless keyboard and mouse batteries are low or empty.
Replace the two AA alkaline batteries in the wireless keyboard and mouse.
Mouse cursor moves too slow or functions badly.
Place the mouse on a mousepad or white sheet of paper.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:02:21 08:29:53Z
Modify Date                     : 2005:02:23 14:30:01+08:00
Page Count                      : 9
Creation Date                   : 2005:02:21 08:29:53Z
Mod Date                        : 2005:02:23 14:30:01+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Weng
Metadata Date                   : 2005:02:23 14:30:01+08:00
Creator                         : Weng
Title                           : TGM-6000R UserMan.PDF
Has XFA                         : No

EXIF Metadata provided by EXIF.tools