Topcon FC200BTSD BT/SD Board User Manual 8 Users Guide

Topcon Corporation BT/SD Board 8 Users Guide

User Manual

1 Ver1.０ July 27, 2006 TOPCON BT/SD Board User’s Manual
2 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. CAUTION: In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. NOTE: The device to which BT/SD Board is installed must display a FCC ID above. IC Notices CAUSION: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb FCC ID: H5P-FC200BTSD IC : 6050AFC200BT
3 (1) Product Overview The BT/SD Board is designed to provide wireless communication ability for the TOPCON’s “FC” Field Controller families to communicate with other Bluetooth devices via the class 2 of the Bluetooth V1.2 protocol. This device is equipped with some type of “FC” Field Controllers before shipping. (2) Features Bluetooth Features Compact wireless data communication module designed for Makitra’s battery-operated tools Low power CSR BlueCore2-Ext Chipset (Bluetooth V1.2) Tx output: 0.5mW Tx and Rx Operation Frequency: 2402-2480 MHz Modulation Method: Frequency Hopping Spectrum Spread (FHSS) / GFSK Number of Channels: 79 (Normal Mode), 79 - 20 (Adaptive Hopping Mode) Channel Intervals: 1 MHz Bit rate: 1 Mbps Packet type in use: DH1 Physical Attributes Size: 48mm (L) x 76mm (W) x 5.5mm (D) Weight: 0.03 Kg Operating Temperature: -20 deg. C to +50 deg. C Power Requirements: 0.3 W @ +3.3 VDC from “FC” Field Controller.
4 (3) Operation To Equip the BT/SD Board with “FC” Field Controller This device is already equipped by TOPCON before shipping. The example of an equipped Field Controller “FC-200” is shown below. Setting up BT/SD Board The FC-200 has Bluetooth transmission function using a built-in BT/SD Board. Information can be exchanged between instruments equipped with the same function using Bluetooth wireless technology. The BT/SD Board is running on the operation system of FC-200, Windows Mobile 5.0 Pocket PC by Microsoft Bluetooth ON/OFF
5 Follow the procedure below to turn on the Bluetooth function. (1) Tap Start > Settings > Connections tab. (2) On the [Wireless Manager] display, tap on the [Bluetooth] icon. (3) Select or clear the Turn on and off Bluetooth check box (4) When the Bluetooth function is turned ON, the wireless LED will flash in green color. Create a Bluetooth partnership Ensure that the two devices are turned on, discoverable, and within close range. (1) Tap Start > Settings > Connections tab. (2) Tap Bluetooth > Devices tab > New Partnership. Your device searches for other devices with Bluetooth capabilities, and displays them in the list. (3) Tap the name of the other device, and tap Next. (4) In Passkey, if you want to use a passkey (recommended for enhanced security), enter a alphanumeric passkey between 1 and 16 characters, and tap Next. Otherwise, leave the passkey blank, and tap Next (5) Enter the same passkey on the other device. (6) Tap Finish Make a device discoverable Other devices with Bluetooth capabilities can detect your device and attempt to beam information to it, establish a partnership, or use a Bluetooth service. (1) Tap Start > Settings > Connections tab. (2) Tap Bluetooth. (3) Select the Turn on Bluetooth check box, and then select the Make this device discoverable to other devices check box Other Bluetooth-enabled devices can now detect your phone and attempt to beam information to it, establish a Bluetooth partnership, or use a Bluetooth service. Enable a Bluetooth beam (1) Tap Start > Settings > Connections tab. (2) Select the Receive all incoming beams check box. (3) When prompted to receive an incoming beam, tap Yes to receive the beamed information. For more “How to and/or Help” on Bluetooth, visit Microsoft! Web site; http://www.microsoft.com/windowsmobile/help/pocketpc/bluetooth.mspx
6 (4) Hints & Tips (1) The BT/SD Board may not work well where Microwave ovens and /or other 2.4GHz ISM devices like wireless LAN are working. Keep RF unit and wireless data receiver away from these devices. (2) If you no longer want your device to be discoverable, clear the Make this device discoverable to other devices check box. (3) For your safety operation, read carefully the tool’s User’s manual before equipping the BT/SD Board to the tool together with this manual and that of the wireless data receiver. (4) The RF unit complies with Part 15 of the FCC Rules and RS-210. Read carefully the FCC notice and/or IC notice at beginning page of this manual for legal and secure operation. (5) Specification Operation Voltage 2.79V to 3.63VDC Power Consumption Tx Operation: 210mW, Stand by Operation: 9mW Operation Temperature -20 deg. C to +50 deg. C Size / weight 48mm (L) x 76mm (W) x 5.5mm (H) / 0.003 Kg Version V1.2 Output Class Class 2 (0.5mW) Supported Profile Serial Port Profile, Dial-up Profile Coverage 10m Bluetooth Type approval FCC IC CE TELEC
7 TOPCON CORPORATION 75-1 Hasunuma-Cho, Itabashi-Ku, Tokyo 174-8580 Japan Phone: 3-3558-2577, FAX: 3-3966-0038, URL: www.topcon.co.jp

Navigation menu