Topcon LS-B110W Laser Receiver User Manual

Topcon Corporation Laser Receiver LS B110W E

a href="https://usermanual.wiki/Topcon" itemprop="url"> Topcon >

user manual

INSTRUCTION MANUALLASER SENSORLS-B110/LS-B110WThank you for purchasing the TOPCON LS-B110/LS-B110W.For the best performance of the instruments, please read these instructions carefully and keep them in a convenient location for future reference.GENERAL HANDLING PRECAUTIONSBefore starting work or operation, be sure to check that the system is functioning properly. Remove the batteries from the instrument when you will not be using it for long period. When washing the instrument, avoid spraying it with a high pressure stream of water from a water hose. The inside of the instrument will be damaged by the water. This instrument is designed based on the International Standard IPX 6, but it is not protected from a high pressure water stream or submergence.Affection of the radio wavesWhen using the instrument in the following place, the strong radio wave may cause faulty operation.• Near the instrument occurring strong radio waves. (e.g. Transceiver)• Near the radio wave towers such as television or radio.DISPLAY FOR SAFE USEIn order to encourage the safe use of products and prevent any danger to the operator and others or damage to properties, important warnings are put on the products and inserted in the instruction manuals.We suggest that everyone understand the meaning of the following displays and icons before reading the “Safety Cautions” and text.• Injury refers to hurt, burn, electric shock, etc.• Physical damage refers to extensive damage to buildings or equipment and furni-ture.HANDLING PRECAUTIONSGuarding the instrument against shockWhen transporting the instrument, provide some protection to minimize risk of shock. Heavy shock may affect beam accuracy.SAFETY CAUTIONSStandard Set Composition1 LS-B110/LS-B110W Instrument .............................. 1pc.2 C-size dry cells........................................................ 4pcs.3 Carrying case .......................................................... 1pc.4 Instruction manual................................................... 1pc.Nomenclature and FunctionsOperation1Position a rotating laser and turn on the laser.2Raise or lower the machine blade or arm to position the cutting edge or bucket at the desired grade elevation.3Mount the LS-B110/LS-B110W onto the mast near the path of the laser beam and turn on the LS-B110/LS-B110W.4Keep the machine blade or arm motionless and raise or lower the LS-B110/LS-B110W and adjust until ON-GRADE position are flash-ing. This is the ON GRADE position.5Securely clamp the LS-B110/LS-B110W in place. The reference position has been set.6While operating, use the LED display to continually check grade, moving the blade or cutting / filling according to the direction of the LS-B110/LS-B110W display.Display MeaningWARNING Ignoring or disregard of this display may lead to death or serious injury.CAUTION Ignoring or disregard of this display may lead to personal injury or physical damage to the instrument.WARNING• There is a risk of fire, electric shock or physical harm if you attempt to disas-semble or repair the instrument yourself.This is only to be carried out by TOPCON or an authorized dealer, only!• Risk of fire or electric shock.Do not use damaged power cable, plug and socket.• Risk of fire or electric shock.Do not use a wet battery.• May ignite explosively.Never use an instrument near flammable gas, liquid matter, and do not use in a coal mine.• Battery can cause explosion or injury.Do not dispose in fire or heat.• The short circuit of a battery can cause a fire.Do not short circuit battery when storing it.• Battery can cause explosion or injury.Remove battery when using the connector for external communication.CAUTIONDo not allow skin or clothing to come into contact with acid from the batteries, if this does occur then wash off with copious amounts of water and seek medical advice.EXCEPTIONS FROM RESPONSIBILITY1) The user of this product is expected to follow all operating instructions and make periodic checks of the product’s performance.2) The manufacturer, or its representatives, assumes no responsibility for results of a faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits.3) The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster, (an earthquake, storms, floods etc.).A fire, accident, or an act of a third party and/or a usage any other usual conditions.4) The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data, an interruption of business etc., caused by using the product or an unusable product.5) The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage except for explained in the user manual.6) The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement, or action due to connecting with other products.Shape: CylindricalDimension: 45 to 51mm in diameterPlease refer to the instruction manual for the machine or contact the machine manufacturer for instructions on install-ing the mast onto the machine (by welding, etc.).45 to 51mmTilt indicatorIndicatorBattery coverBattery cover knobPower switchPower ON: Short pushPower OFF: Long pushDetective precision (Mode) switchClamp knobDetectorDetectorClampConnector for external communicationPlease refer to the back of the instruction manual for the indicator display patterns.Remove battery when connecting.Pipes that can be installed onto the LS-B110/LS-B110W are as described below.Wireless communi-cation switch(For the LS-B110W only)Wireless communi-cation LED(For the LS-B110W only)Zero-set switchTilt switch
IndicatorRotating laser battery warning displayA flash shows that the rotating laser power is low.(This function is not usable to the rotating laser which does not have the function to output alarm signal.)Goes out:Battery is sufficient. (When Mode 1 is selected, the lamp will light up.)Flashes slowly:The power is low, but sensor is still usable.Flashes quickly:Dead battery. Replace the dry battery with new one.Mode1Mode2Mode3Mode4Precision modeLS-B110/LS-B110W Battery remaining displayBattery remaining display LEDRotating laser battery remaining warning LEDIt is possible to change the detective precision of the instrument.Please select Mode 1 to 4 according to the objective of the operation.Pressing the detective precision (Mode) switch will change the mode and the corresponding LED lamp will light up.(During battery remaining display shown below, the lamp will flash.)Battery remaining for the LS-B110/LS-B110W will be displayed at 3 levels.Indicator (LED) Detective precisionMode1: ±3mm (0.009ft) Mode2: ±6mm (0.019ft) Mode3: ±15mm (0.049ft)Mode4: ±30mm (0.098ft)±15mm/±0.05ft(30mm/0.1ft width)±30mm/±0.1ft(60mm/0.2ft width)When the laser beam is off to the top or to the bottomFlashes slowlyFlashes quickly±50mm/±0.16ft(100mm/0.33ft width)±70mm/±0.23ft(140mm/0.46ft width)±125mm/±0.41ft(250mm/0.82ft width)Flashes quicklyFlashes slowlyFlashes more slowlyLaser beam positions and display patternsHeight alert warning of rotating laserA flash signifies that the height alert function of rotating laser is operating.(This function is not usable to the rotating laser which does not have the height alert and the function to output alarm signal.)FlashesPower-save functionFlashesThe instrument turns the power-save mode after detecting no laser beam for more than approx. five minutes.During the power-save mode, LED (1 yellow, 1 red) will flash.(The mode is canceled automatically when the instrument detects a laser beam again. The mode can also be can-celed by pressing the power switch again.)Auto-cut off functionThe power will be turned off automatically after detecting no laser beam for more than approx. 60 minutes. (To turn on the laser sensor, press the power switch again.)* When turning the power on by pressing the power switch for more than 5 seconds, the power-save and the auto-cut off functions may be inval-idated.Connector for external communicationThe LS-B110/LS-B110W can be used as the laser detecting sensor for any TOP-CON machine control system by connecting the communication cable to the con-nector for external communication. (Please contact your sales agent for details.)Connecting the connector cable PC-18 (sold separately) to the connector for external communication will enable the use of the LS-B110/LS-B110W from an external power supply. When the instrument is operated with the external power supply, the power-save and the auto-cut off functions will be invalidated. The LS-B110/LS-B110W will turn on when connection is made to external power supply. The power switch of the instrument will not function when an external power sup-ply is used. Wireless communication will not function when using external com-munication or an external power supply.
Download:
Mirror Download [FCC.gov]
Document ID919857
Application IDS118cKLF1h+61UCg9HV6wQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize31.4kB (392523 bits)
Date Submitted2008-03-27 00:00:00
Date Available2008-03-27 00:00:00
Creation Date2008-02-18 14:07:38
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2008-03-11 11:39:31
Document TitleLS-B110W(E).fm
Document CreatorFrameMaker 7.1
Document Author: 92078
FCC ID Filing: H5P-LS-B110W

Navigation menu