Topeak TPB-C01 Pano Computer User Manual M TPB C01 GB 04 14

Topeak, Inc. Pano Computer M TPB C01 GB 04 14

Contents

Manual

for 6 sec to return to COMPUTER MODE after riding. for 6 sec to switch.( 3 sec to clear and reset all data) for 6 sec to return to COMPUTER MODE.On computer for 6 sec to enter CLONE MODE.to enter each setting mode. to change digit. to next selection. Keep following the & processes for the rest of setting then to confirm .Follow the procedure in each section to set up your computer:GBPanoComputer WirelessUser's Guide• PanoComputer data syncs with Topeak PanoBike App only.• Please read all instructions before first use!• Before riding, close the PanoBike App on your smart device to record ride data in Computer Mode.PanoComputer Mount(Fits ø 31.8 mm Handlebar only)BoltSET ButtonRESET ButtonMODE ButtonPress Press and HoldOPERATION SYMBOLSREQUIRED ACCESSORIESHOW TO SET UP YOUR PANOCOMPUTERHOW TO OPERATE IN CLONE MODE (SECOND MONITOR function) (Using English version as an example)6 secData syncs with computerStart riding...Please download and install Topeak PanoBike App from Apple App Store or GooglePlay to your smart device first.Tap II to stop and save ride data to your smart device.1 sec: select digit3 sec: go to next section / into setting mode6 sec: switch COMPUTER MODE and CLONE MODE.OPTION A [ COMPUTER MODE ] | OPERATE THE COMPUTERConfirmTurn the crankarm counterclockwise. When "1" appears, the Speed & Cadence Sensor pairing is successful.Note: Bike B will indicate "2".Wear the Heart Rate Monitor on your chest. When "1" appears, the pairing is successful.Note: Bike B will indicate "2".3 sec 3 secBIKE A.B Date 12/ 24h clock km/ m ODOWheel CircumferencePairing Speed & Cadence Sensor + Heart Rate MonitorSCREEN DISPLAY (RIDING STATUS) (COMPUTER MODE ONLY)If no button is touched for 10 seconds, the screen will switch to Screen 1 automatically.Screen 1 Screen 2 Screen 33 sec3 secto saveride datato check the ride data just saved.SAVING RIDING DATA (COMPUTER MODE ONLY)PAIRING SPEED & CADENCE SENSOR + HEART RATE MONITORRide data is transmitted to computer from smart device. Smart device screen can be turned o to save battery.OPTION B [ CLONE MODE ] | SETTING THE COMPUTER WITH PANOBIKE APP (Using English version as an example)Open PanoBike App in your smart device thentap “ ” icon.6 secTap "Setup" button to pair smart device with computer. Choose desired time and unit format. Insert power zones and wheel size setting. Tap "Save" to complete.Follow the pairing procedures to pair Speed & Cadence Sensor and Heart Rate Monitor as in OPTION A.PanoComputer includes “DUAL MODE” functionSensors transmit ride data to PanoBike App on your smart device and displays ride data on computer. Smart device screen is turned off to save battery.[ COMPUTER MODE ]Sensors transmit ride data to computer directly. After riding, data can be transferred to PanoBike App on your smart device.[ CLONE MODE ]1 2 3 4On computer for 6 sec to enter CLONE MODE. Open Topeak PanoBike App. Tap "START RIDE", then tap "START" to record your ride.1 2 3PanoBike Speed & Cadence SensorPanoBike Heart Rate MonitorArt No. TPB-HRM01 Art No. TPB-CS01
On computer for 6 sec to enter CLONE MODE.Copyright © Topeak, Inc. 2014 M-TPB-C01-GB 04/14PanoComputer WirelessUser's GuideBattery < 2.7 VLOW BATTERY2-year Warranty: All electronic and mechanical components against manufacturer defects only. Batteries are not covered under any implied warranty.Warranty Claim RequirementsTo obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this manual.* The specifications and design are subject to change without notice.Please contact your Topeak dealer with any questions.For USA customer service, call: 1-800-250-3068Website: www.topeak.comWARRANTY* “Current Cadence” Requires optional PanoBike Speed & Cadence Sensor.* “Current Heart Rate” Requires optional PanoBike Heart Rate Monitor.* Wheel circumference default: 2235 mmDISPLAY FUNCTIONCurrent SpeedAverage SpeedMaximum SpeedTrip DistanceAccumulated DistanceRide TimeAccumulated Ride TimeLow Battery Indicator12H/ 24H clockBike A and Bike BINCREMENTSSPECIFICATIONS ACCURACY0.1 km/h or mi/h0.1 km/h or mi/h0.1 km/h or mi/h0.1 km or m0.1 km or m1 Second1 Minute1 Minute199 km/h, 199 mi/h199 km/h, 199 mi/h199 km/h, 199 mi/h0.00~9999.99 km or m0.00~99999.9 km or m0 : 00 : 00~99 : 59 : 590000 : 00~9999 : 59< 2.7 VCurrent Cadence * 0~199 RPM0~199 BPMCurrent Heart Rate *Bluetooth® SystemSmartPhone Connected1 : 00 ~12 : 59 (12 H)0 : 00 ~23 : 59 (24 H)1 %0.1 %0.1 %0.1 %0.1 %0.1 %0.1 %0.003 %±±±±±±±±Pace IndicatorSPECIFICATIONTech: Bluetooth® Smart (BLE 4.0) super low energy technologyMount: Handlebar Mount (ø 31.8 mm only)Battery Lifetime (max.): 360 hours (1 hr/ day use) *Battery: CR2032 x 1 pc (included)Transmission Range: <10 meter (33 ft)Waterproof: IPX 7Operating temperature: -10°C ~ 50°C (14°F~122°F)Weight: 30 g / 1.06 oz (computer only)IMPORTANT NOTECLEAR ALL DATA SETTING will clear all stored data.CLEAR ALL DATA SETTING is required during FIRST SETUP or BATTERY CHANGE.All data will be cleared when replacing the battery. Before changing battery, write down stored data ODO and ART.The TOPEAK PANOCOMPUTER can be used in the rain but should not be intentionally submerged underwater.Do not leave the computer exposed to direct sunlight when not riding the bicycle.Do not disassemble the computer body or its accessories.Check relative positions and gap between sensor and magnet periodically.Do not use harsh chemicals to clean the computer body or its accessories.Remember to pay attention to the road while riding. Check the computer mount before each ride to ensure a secure connection.Dispose of used batteries according to local regulations.1.2.3.4.5.6.7.8.9.10.11.OPTIONAL ACCESSORIESPanoComputerMountArt No. TPB-CM01Art No. TC1022RideCase Mount RXDETERMINE WHEEL CIRCUMFERENCEMETHOD A) CHOOSE FROM WHEEL CIRCUMFERENCE DATA BELOW METHOD B) MEASURE WHEEL CIRCUMFERENCEmm x 3.14KM/ H:Wheel Circumference= mm x 3.1416x1.5016x1.7516x2.0018x1.5018x1.7520x1.5020x1.7524x1.7524x2.0026x1.5026x1.7526x1.9526x2.1026x2.20700x38C29x2.0040-30547-30534-30540-35547-35540-40647-40647-50750-50740-55947-55950-55954-55956-55938-62256-6221185119512451340135014901515189019252010202320502068208321802272650C Tubular650x20C650x23C650x25C27.5x2.25(650B)27.5x2.35(650B)700C Tubular700x20C700x23C700x25C700x28C700x30C700x32C700x35C29x2.1029x2.251920193819441952221722302130208620962105213621462155216822882320Tire Size DesignationTire Size DesignationWheel Circumference Wheel Circumference 20-57123-57125-571 57-584 60-584 20-62223-62225-62228-62230-62232-62235-62254-62257-622CHANGING BATTERYRemove the Battery Cover rstChange the battery12Operation Time up to 360 hrs.+-CR2032TROUBLE SHOOTINGThe unit will return normal state when the temperature rises.Check the following before bringing unit in for repair.Is the temperature below -10˚C (14˚F)?PROBLEM CHECK ITEMS REMEDYNo display 1. Is the battery exhausted?2. Is the battery installed correctly?1. Replace the battery.2. Make sure that the positive (+) pole of the battery is facing the battery cap.No current speed or incorrect data1. Is it in setup mode?2. Are the relative positions and gap between sensor and magnet correct?3. Is the wheel circumference correct?1. Refer to the data setting procedure and complete the adjustment.2. Refer to INSTALLATION and re-adjust correctly.3. Refer to CIRCUMFERENCE SETTING and enter correct value.Irregular displayLCD is black Did you leave the computer in direct sunlight whennot riding the bicycle for a long while?Refer to "Clear All Data setting" and initiate the computer again.Place the computer body in the shade to return to normal state.Display is slow1. Make sure the position of chest strap is correct.2. Replace the battery.1. Is the chest strap being worn correctly?2. Is the battery of heart rate monitor exhausted?No current heart rate dataHOW TO INSTALL PANOCOMPUTERInstall the bracket on the handlebar.3mm Allen Key1Install the computer2HOW TO RELEASE PANOCOMPUTERPress the lever1Release the computer2For your safety, PanoComputer has a Max Heart Rate Alarm function. When Heart Rate exceed Max limit, the Heart icon will be shown in black. Set Max Heart Rate limit in Topeak PanoBike App.* “HEART RATE” Requires optional PanoBike Heart Rate Monitor.MAX HEART RATE ALARM TOPEAK PANOBIKE APPPanoComputer Syncs with PanoBike App only.The ultimate cycling performance app that utilizes your smartphone’s powerful Bluetooth® Smart capabilities and transforms it into your bike computer, personal training and health management device. This app combines the functions of phone, cycle computer, GPS, music player, camera, and heart rate monitor (requires purchase of separate PanoBike Heart Rate Monitor) into one program that allows you to have loads of fun on your bike ride.(Download for Free)iOS 5 or above Android OS 4.3 or above(Download for Free)During non-riding status, if no button is touched for 10 minutes, the computer will go into Sleep Mode.Please press “MODE” to wake up the computer.SLEEP MODEin COMPUTER MODEin CLONE MODEDuring non-riding status, if no Bluetooth® signal is connected, the computer will go into Sleep Mode after 2 minutes. Please press “MODE” to wake up the computer. for 6 sec to return to COMPUTER MODE.TRANSMITTING RIDE DATA TO PANOBIKE APP (COMPUTER MODE ONLY) (Using English version as an example)After the transmitting, the current trip record number will appear on screen.On Smart Device, open Topeak PanoBike App and tap "History" iconThe computer is ready to transmit your riding data.Tap " " to transfer new ride data to Topeak PanoBike App.1 2 3 4NOTE: Any transmitted data deleted from smart device history cannot be recalled from PanoComputer.Turn-on Bluetooth® on your smart device first.* Overall battery life is dependent on usage profile and battery condition.

Navigation menu