Topeak TPB-C01 Pano Computer User Manual M TPB C01 GB 04 14

Topeak, Inc. Pano Computer M TPB C01 GB 04 14

Contents

Manual

Download: Topeak TPB-C01 Pano Computer User Manual M TPB C01 GB 04 14
Mirror Download [FCC.gov]Topeak TPB-C01 Pano Computer User Manual M TPB C01 GB 04 14
Document ID2312057
Application IDJZ/+JK/aM069Mm79minzGQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize146kB (1825047 bits)
Date Submitted2014-07-01 00:00:00
Date Available2014-07-01 00:00:00
Creation Date2014-05-19 15:31:33
Producing SoftwareAdobe PDF library 9.90
Document Lastmod2014-05-19 15:31:33
Document TitleM-TPB-C01-GB-04-14
Document CreatorAdobe Illustrator CS5

PanoComputer Wireless
OPERATION SYMBOLS
Press
User's Guide
• PanoComputer data syncs with Topeak PanoBike App only.
• Please read all instructions before first use!
• Before riding, close the PanoBike App on your smart device to record ride data in Computer Mode.
Press and Hold
GB
PanoComputer includes “DUAL MODE” function
[ COMPUTER MODE ]
[ CLONE MODE ]
Bolt
for
6 sec to switch.
MODE Button
RESET Button
1 sec: select digit
SET Button
3 sec: go to next section /
into setting mode
6 sec: switch COMPUTER
MODE and CLONE
MODE.
PanoComputer Mount
(Fits ø 31.8 mm Handlebar only)
3 sec to clear
and reset all data)
Sensors transmit ride data
to computer directly.
After riding, data can be
transferred to PanoBike
App on your smart device.
REQUIRED ACCESSORIES
PanoBike Heart
Rate Monitor
Art No. TPB-HRM01
PanoBike Speed &
Cadence Sensor
Art No. TPB-CS01
Sensors transmit ride data
to PanoBike App on your
smart device and displays
ride data on computer.
Smart device screen is
turned off to save battery.
HOW TO SET UP YOUR PANOCOMPUTER
OPTION A [ COMPUTER MODE ] | OPERATE THE COMPUTER
BIKE A.B
Date
12/ 24h clock
km/ m
Pairing Speed & Cadence
Sensor + Heart Rate Monitor
ODO
Wheel Circumference
Follow the procedure in each section to set up your computer:
to enter each setting mode.
PAIRING
SPEED &
CADENCE
SENSOR
HEART
RATE
MONITOR
to change digit.
3 sec
Keep following the
to next selection.
3 sec
processes for the rest of setting then
to confirm .
3 sec
Confirm
Turn the crankarm counterclockwise. When "1" appears,
the Speed & Cadence Sensor pairing is successful.
Wear the Heart Rate Monitor on your chest.
When "1" appears, the pairing is successful.
Note: Bike B will indicate "2".
Note: Bike B will indicate "2".
SAVING RIDING DATA (COMPUTER MODE ONLY)
SCREEN DISPLAY (RIDING STATUS) (COMPUTER MODE ONLY)
If no button is touched for 10 seconds,
the screen will switch to Screen 1
automatically.
3 sec
to save
ride data
Screen 1
Screen 2
to check the ride
data just saved.
Screen 3
OPTION B [ CLONE MODE ] | SETTING THE COMPUTER WITH PANOBIKE APP (Using English version as an example)
Please download and install Topeak PanoBike App from Apple App Store or GooglePlay to your smart device first.
Open PanoBike App in your smart device then
tap “ ” icon.
On computer for 6 sec to enter CLONE MODE.
Tap "Setup" button to pair smart device with computer.
Choose desired time and unit format. Insert power zones
and wheel size setting. Tap "Save" to complete.
for 6 sec
to return to COMPUTER
MODE.
6 sec
Follow the pairing procedures to pair Speed & Cadence Sensor and Heart Rate Monitor as in OPTION A.
HOW TO OPERATE IN CLONE MODE (SECOND MONITOR function) (Using English version as an example)
On computer for 6 sec to enter CLONE MODE.
Open Topeak PanoBike App. Tap "START RIDE", then tap "START" to record your ride.
Start riding...
Data syncs with computer
6 sec
Ride data is transmitted to
computer from smart device.
Smart device screen can be
turned off to save battery.
Tap II to stop and save ride
data to your smart device.
for 6 sec
to return to COMPUTER
MODE after riding.
PanoComputer Wireless
User's Guide
TRANSMITTING RIDE DATA TO PANOBIKE APP (COMPUTER MODE ONLY) (Using English version as an example)
On computer
for 6 sec to enter CLONE MODE.
On Smart Device, open Topeak PanoBike App and
tap "History" icon
Tap "
" to transfer new ride data to Topeak PanoBike App.
for 6 sec to
return to COMPUTER MODE.
After the transmitting,
the current trip record
number will appear on
screen.
The computer is ready to
transmit your riding data.
NOTE: Any transmitted data deleted from smart device history cannot
be recalled from PanoComputer.
Turn-on Bluetooth® on your smart device first.
HOW TO INSTALL PANOCOMPUTER
DISPLAY
2 Install the
computer
3mm Allen Key
1 Install the bracket on the handlebar.
SPECIFICATIONS
INCREMENTS
Current Speed
FUNCTION
199 km/h, 199 mi/h
0.1 km/h or mi/h
±1 %
Average Speed
199 km/h, 199 mi/h
0.1 km/h or mi/h
± 0.1 %
Maximum Speed
199 km/h, 199 mi/h
0.1 km/h or mi/h
± 0.1 %
Trip Distance
0.00~9999.99 km or m
0.1 km or m
± 0.1 %
Accumulated Distance
0.00~99999.9 km or m
0.1 km or m
± 0.1 %
Ride Time
0 : 00 : 00~99 : 59 : 59
1 Second
± 0.1 %
Accumulated Ride Time
0000 : 00~9999 : 59
1 Minute
± 0.1 %
Low Battery Indicator
< 2.7 V
12H/ 24H clock
1 : 00 ~12 : 59 (12 H)
0 : 00 ~23 : 59 (24 H)
1 Minute
± 0.003 %
SLEEP MODE
ACCURACY
in COMPUTER MODE
During non-riding
status, if no button is
touched for 10 minutes,
the computer will go
into Sleep Mode.
Please press “MODE” to
wake up the computer.
Pace Indicator
HOW TO RELEASE PANOCOMPUTER
Bike A and Bike B
2 Release the
computer
Current Cadence *
0~199 RPM
Current Heart Rate *
0~199 BPM
in CLONE MODE
During non-riding
status, if no Bluetooth®
signal is connected, the
computer will go into
Sleep Mode after 2
minutes.
Please press “MODE” to
wake up the computer.
Bluetooth® System
SmartPhone Connected
* “Current Cadence” Requires optional PanoBike Speed & Cadence Sensor.
* “Current Heart Rate” Requires optional PanoBike Heart Rate Monitor.
* Wheel circumference default: 2235 mm
1 Press the lever
DETERMINE WHEEL CIRCUMFERENCE
METHOD A) CHOOSE FROM WHEEL CIRCUMFERENCE DATA BELOW
Tire Size Designation
40-305
47-305
34-305
40-355
47-355
40-406
47-406
47-507
50-507
40-559
47-559
50-559
54-559
56-559
38-622
56-622
Wheel Circumference
16x1.50
16x1.75
16x2.00
18x1.50
18x1.75
20x1.50
20x1.75
24x1.75
24x2.00
26x1.50
26x1.75
26x1.95
26x2.10
26x2.20
700x38C
29x2.00
1185
1195
1245
1340
1350
1490
1515
1890
1925
2010
2023
2050
2068
2083
2180
2272
Tire Size Designation
20-571
23-571
25-571
57-584
60-584
20-622
23-622
25-622
28-622
30-622
32-622
35-622
54-622
57-622
METHOD B) MEASURE WHEEL CIRCUMFERENCE
Wheel Circumference
650C Tubular
650x20C
650x23C
650x25C
27.5x2.25(650B)
27.5x2.35(650B)
700C Tubular
700x20C
700x23C
700x25C
700x28C
700x30C
700x32C
700x35C
29x2.10
29x2.25
KM/ H:
Wheel Circumference
= mm x 3.14
1920
1938
1944
1952
2217
2230
2130
2086
2096
2105
2136
2146
2155
2168
2288
2320
Battery < 2.7 V
Tech: Bluetooth® Smart (BLE 4.0) super low energy technology
Mount: Handlebar Mount (ø 31.8 mm only)
Battery Lifetime (max.): 360 hours (1 hr/ day use) *
Battery: CR2032 x 1 pc (included)
Transmission Range: <10 meter (33 ft)
Waterproof: IPX 7
Operating temperature: -10°C ~ 50°C (14°F~122°F)
Weight: 30 g / 1.06 oz (computer only)
mm x 3.14
* Overall battery life is dependent on usage profile and battery condition.
CHANGING BATTERY
MAX HEART RATE ALARM
LOW BATTERY
SPECIFICATION
Operation Time up to
For your safety, PanoComputer has a Max
Heart Rate Alarm function. When Heart Rate
exceed Max limit, the Heart icon will be shown
in black. Set Max Heart Rate limit in Topeak
PanoBike App.
TOPEAK PANOBIKE APP
360 hrs.
Change
the battery
The ultimate cycling performance app that utilizes your
smartphone’s powerful Bluetooth® Smart capabilities and
transforms it into your bike computer, personal training
and health management device.
This app combines the functions of phone, cycle computer,
GPS, music player, camera, and heart rate monitor (requires
purchase of separate PanoBike Heart Rate Monitor) into
one program that allows you to have loads of fun on your
bike ride.
CR2032
* “HEART RATE” Requires optional PanoBike
Heart Rate Monitor.
Remove the Battery Cover first
PanoComputer Syncs
with PanoBike App
only.
iOS 5 or above
Android OS 4.3 or above
(Download for Free)
(Download for Free)
IMPORTANT NOTE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
CLEAR ALL DATA SETTING will clear all stored data.
CLEAR ALL DATA SETTING is required during FIRST SETUP or BATTERY CHANGE.
All data will be cleared when replacing the battery. Before changing battery, write down stored data ODO and ART.
The TOPEAK PANOCOMPUTER can be used in the rain but should not be intentionally submerged underwater.
Do not leave the computer exposed to direct sunlight when not riding the bicycle.
Do not disassemble the computer body or its accessories.
Check relative positions and gap between sensor and magnet periodically.
Do not use harsh chemicals to clean the computer body or its accessories.
Remember to pay attention to the road while riding.
Check the computer mount before each ride to ensure a secure connection.
Dispose of used batteries according to local regulations.
OPTIONAL ACCESSORIES
RideCase Mount RX
PanoComputer
Mount
Art No. TC1022
Art No. TPB-CM01
TROUBLE SHOOTING
Check the following before bringing unit in for repair.
PROBLEM
CHECK ITEMS
REMEDY
No display
1. Is the battery exhausted?
2. Is the battery installed correctly?
1. Replace the battery.
2. Make sure that the positive (+) pole of the battery is facing the battery cap.
No current
speed or
incorrect data
1. Is it in setup mode?
2. Are the relative positions and gap between sensor and magnet correct?
3. Is the wheel circumference correct?
1. Refer to the data setting procedure and complete the adjustment.
2. Refer to INSTALLATION and re-adjust correctly.
3. Refer to CIRCUMFERENCE SETTING and enter correct value.
Irregular display
Refer to "Clear All Data setting" and initiate the computer again.
WARRANTY
2-year Warranty: All electronic and mechanical components against manufacturer defects only.
Batteries are not covered under any implied warranty.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales
receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if
the product is damaged due to user crash, abuse, system alteration, modification, or used in any way
not intended as described in this manual.
* The specifications and design are subject to change without notice.
LCD is black
Did you leave the computer in direct sunlight when
not riding the bicycle for a long while?
Place the computer body in the shade to return to normal state.
Display is slow
Is the temperature below -10˚C (14˚F)?
The unit will return normal state when the temperature rises.
No current
heart rate data
1. Is the chest strap being worn correctly?
2. Is the battery of heart rate monitor exhausted?
1. Make sure the position of chest strap is correct.
2. Replace the battery.
Please contact your Topeak dealer with any questions.
For USA customer service, call: 1-800-250-3068
Website: www.topeak.com
Copyright © Topeak, Inc. 2014
M-TPB-C01-GB 04/14

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : M-TPB-C01-GB-04-14
Creator Tool                    : Adobe Illustrator CS5
Create Date                     : 2014:05:19 15:31:33+08:00
Modify Date                     : 2014:05:19 15:31:33+08:00
Metadata Date                   : 2014:05:19 15:31:33+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 176
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 25190 bytes, use -b option to extract)
Document ID                     : xmp.did:F97F117407206811822ADB0AB143F259
Instance ID                     : uuid:237abf12-128e-2044-a25b-6aa9214c1707
Original Document ID            : uuid:EB5A36F6C31BE311ADD6FAA66F1B06FB
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:4b2a5dec-8c6b-1242-a42b-70867ad248f4
Derived From Document ID        : xmp.did:0180117407206811822AC80A2062EFA5
Derived From Original Document ID: uuid:EB5A36F6C31BE311ADD6FAA66F1B06FB
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:0180117407206811822AC80A2062EFA5, xmp.iid:F97F117407206811822ADB0AB143F259
History When                    : 2014:03:28 09:30:09+08:00, 2014:05:19 15:31:26+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/04_history_transform.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/06_history_connected.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/05_history_syncing.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/03_data_setting.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/02_computer_setting.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/08_stop_riding.jpg, /Volumes/Data/FILE3/Topeak/Packaging/Pano_series/Speed&Cadence_sensor/QRickit_panobikeapp_android.tif, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/07_start_riding.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/01_bluetooth.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/02_computer_setting.jpg, /FILE3/Topeak/Owner's_Manual/Pano-series/Pano_Computer/01_bluetooth.jpg
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 29.678430
Max Page Size H                 : 41.999986
Max Page Size Unit              : Centimeters
Font Name                       : Arial-BoldMT, Myriad-Roman, MyriadPro-Light, MyriadPro-LightIt, MyriadPro-Regular, MyriadPro-It, MyriadPro-Semibold, MyriadPro-SemiboldIt, MyriadPro-Bold, MyriadPro-Black
Font Family                     : Arial, Myriad, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro
Font Face                       : Bold, Roman, Light, Light Italic, Regular, Italic, Semibold, Semibold Italic, Bold, Black
Font Type                       : Open Type, Type 1, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.06, 001.001, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28
Font Composite                  : False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial Bold.ttf, MyriaRom; Myriad, MyriadPro-Light.otf, MyriadPro-LightIt.otf, MyriadPro-Regular.otf, MyriadPro-It.otf, MyriadPro-Semibold.otf, MyriadPro-SemiboldIt.otf, MyriadPro-Bold.otf, MyriadPro-Black.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: Topeak
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 14.999999
Swatch Groups Colorants Yellow  : 100.000000
Swatch Groups Colorants Black   : 0.000000
Producer                        : Adobe PDF library 9.90
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 15.0
For                             : Shany,
Bounding Box                    : -895 -1194 842 0
Container Version               : 11
Creator Version                 : 15
EXIF Metadata provided by EXIF.tools
FCC ID Filing: R3STPB-C01

Navigation menu