Toro Greensmaster 1600 Specifications

: Toro Toro-Greensmaster-1600-Specifications-138950 toro-greensmaster-1600-specifications-138950 toro pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Greensmaster® 1600
Its wider 26" cut and extended height of cut range offers greater productivity. Ideal for tees, aprons, even large greens.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

46

Greensmaster® 1600 Specifications*
GREENSMASTER 1600**, MODEL 04056
ENGINE
FUEL CAPACITY
TRACTION AND
IMPLEMENT DRIVE
REEL DRIVE
GROUND SPEED
DIFFERENTIAL
CLUTCHES
BRAKE
TRACTION DRUM
CONTROLS
HANDLE
TRANSPORT/TIRES/
KICKSTAND
REEL CONSTRUCTION
WIDTH OF CUT
HEIGHT OF CUT
CLIP
BEDKNIFE/BEDBAR
GRASS BASKET
FRONT ROLLER
DIMENSIONS
CERTIFICATION
WARRANTY

Subaru® Heavy-Duty Industrial, 4.3 HP, OHC, 4-cycle, CARB, EPA, EU, China certified gasoline engine with integral lighting coil. Displacement: 7.7 cu in. (126 cc). Cast
iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.
3.17 quarts (3.0 liters) regular grade unleaded gasoline.
Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.
Positive drive belt powered reel. Manually activated jaw-type clutch provides drive engagement/disengagement.
Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h) with transport tires installed.
Peerless Series 100.
Traction: inside belt idler. Reel: jaw type.
Servicing brake; band type.
Dual cast aluminum. 7.5" (19 cm) diameter.
Engine mounted: recoil starter, choke, fuel shut-off. Handle mounted: Hour meter, on/off switch, throttle lever, traction engage lever, service/part brake lever, on/off
light switch (optional). Frame mounted: reel drive engage lever. Safety devices: neutral interlock system, servicing/park brake, enclosed drive system.
Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.
Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bar) tire pressure. Lift assist kickstand is standard.
5" (12.7 cm) diameter, 8 high carbon steel blades welded to 6 stamped steel spiders. Optional 11-blade reel.
26" (66 cm)
.125"-1.25" (3.2 -31.8 mm)
		
Standard 8-Blade:	
Optional 11-Blade:	

Standard	
.23" (5.8 mm)	
.17" (4.3 mm)	

w/Clip Kit
.34" (8.6 mm)
.25" (6.4 mm)

Dual screw “click” adjustment to reel. Low-cut bedknife standard.
Molded polyethylene. 2 position.
Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200" spacing.
	 Overall Length	
	 59" (150 cm)	

Overall Width	
41" (104 cm)	

Overall Height	
48" (122 cm) w/o transport tires	

Weight
232 lbs. (146.5 kg) w/o transport tires	

Designed in accordance to ANSI specifications, B71.4-2012 and European Community (CE) specifications with required kits.
Two-year limited warranty. Refer to the Operator’s Manual for further details.

GREENSMASTER 1600 ACCESSORIES
STANDARD EQUIPMENT

ROLLER & ROLLER SCRAPER OPTIONS

TRACTION UNIT ACCESSORIES

93-9039

Narrow Wiehle Roller

95-0930

Full Roller

04062

Light Kit

112-9280-01

Bedbar - Standard (Red)

65-8560

Front Roller Extension Kit

112-9282

Operator Presence Bail Kit (ANSI/CE req.)

Wiehle Roller Scraper

115-1886

Traction Slow Down Kit

65-9000

Clip Kit

04123

Wheel Kit

93-9015

Low Cut Bedknife

127-2206

8-Blade Reel (standard)

REEL OPTION
127-2207

11-Blade Reel

BEDKNIFE & BEDBAR OPTIONS

112-9290

GROOMING OPTIONS
04134

Reverse Groomer Drive

117-0073

High Altitude Jet

125-3451

Forward Rotating Kit

115-4754

Wireless Hour Meter

04276

Greens Perfection Brush – Stiff

120-9690

Wire Harness (for Wireless Hour Meter)

04286

Spring Steel Grooming Reel

112-9275

Microcut Bedknife

04287

Carbide Grooming Reel

117-1548

EdgeMaxTM Tournament Bedknife

04288

Spiral Brush Grooming Reel

04399

Turf Evaluator

94-5885

Tournament Bedknife

04742

Thin Blade Grooming Reel

125-5610

Paper – Reel

107-8181

Fairway Bedknife

125-5611

Shim – Reel

104-2646

High Cut Bedknife

94-9010

Height of Cut Bar Assembly

112-9278-03

Bedbar - Aggressive (Black)

99-4286

High Height of Cut Arm

*Specifications and design subject to change without notice. Products depicted in this literature
are for demonstration purposes only. Actual products offered for sale may vary in design,
required attachments and safety features. Consult your local Toro Distributor.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

47

TOOLS

The Greensmaster 1600 is manufactured
in Tomah, WI ISO 9002 Certified Plant.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:03:10 09:23:53-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:03:10 09:24:07-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:10 09:24:07-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:29ec4362-133a-e84d-9b2b-acccea174734
Instance ID                     : uuid:0093768e-c456-1b44-9394-eee66cf5f908
Producer                        : Adobe PDF Library 11.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools