Toro Greensmaster 1600 Specifications

: Toro Toro-Greensmaster-1600-Specifications-138950 toro-greensmaster-1600-specifications-138950 toro pdf

Open the PDF directly: View PDF .
Page Count: 2

46

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

Greensmaster® 1600

Its wider 26" cut and extended height of cut range offers greater productivity. Ideal for tees, aprons, even large greens.

47

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

Greensmaster® 1600 Specifications*

GREENSMASTER 1600**, MODEL 04056

ENGINE

Subaru® Heavy-Duty Industrial, 4.3 HP, OHC, 4-cycle, CARB, EPA, EU, China certified gasoline engine with integral lighting coil. Displacement: 7.7 cu in. (126 cc). Cast

iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.

FUEL CAPACITY

3.17 quarts (3.0 liters) regular grade unleaded gasoline.

TRACTION AND

IMPLEMENT DRIVE

Engine to countershaft drive: two “A” section V-belts. Timing belts from countershaft to differential, drive drum and reel.

REEL DRIVE

Positive drive belt powered reel. Manually activated jaw-type clutch provides drive engagement/disengagement.

GROUND SPEED

Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h) with transport tires installed.

DIFFERENTIAL

Peerless Series 100.

CLUTCHES

Traction: inside belt idler. Reel: jaw type.

BRAKE

Servicing brake; band type.

TRACTION DRUM

Dual cast aluminum. 7.5" (19 cm) diameter.

CONTROLS

Engine mounted: recoil starter, choke, fuel shut-off. Handle mounted: Hour meter, on/off switch, throttle lever, traction engage lever, service/part brake lever, on/off

light switch (optional). Frame mounted: reel drive engage lever. Safety devices: neutral interlock system, servicing/park brake, enclosed drive system.

HANDLE

Loop style; 1" (2.5 cm) diameter with easy pull pin height adjustment, operator selected.

TRANSPORT/TIRES/

KICKSTAND

Optional – Two quick detachable pneumatic tires, 3.00 x 3.25-6. 15 psi (1.03 bar) tire pressure. Lift assist kickstand is standard.

REEL CONSTRUCTION

5" (12.7 cm) diameter, 8 high carbon steel blades welded to 6 stamped steel spiders. Optional 11-blade reel.

WIDTH OF CUT

26" (66 cm)

HEIGHT OF CUT

.125"-1.25" (3.2 -31.8 mm)

CLIP

Standard w/Clip Kit

Standard 8-Blade: .23" (5.8 mm) .34" (8.6 mm)

Optional 11-Blade: .17" (4.3 mm) .25" (6.4 mm)

BEDKNIFE/BEDBAR

Dual screw “click” adjustment to reel. Low-cut bedknife standard.

GRASS BASKET

Molded polyethylene. 2 position.

FRONT ROLLER

Aluminum Wiehle roller standard; 2" (5.1 cm) diameter, .200" spacing.

DIMENSIONS

Overall Length Overall Width Overall Height Weight

59" (150 cm) 41" (104 cm) 48" (122 cm) w/o transport tires 232 lbs. (146.5 kg) w/o transport tires

CERTIFICATION

Designed in accordance to ANSI specifications, B71.4-2012 and European Community (CE) specifications with required kits.

WARRANTY

Two-year limited warranty. Refer to the Operator’s Manual for further details.

The Greensmaster 1600 is manufactured

in Tomah, WI ISO 9002 Certified Plant.

* Specifications and design subject to change without notice. Products depicted in this literature

are for demonstration purposes only. Actual products offered for sale may vary in design,

required attachments and safety features. Consult your local Toro Distributor.

GREENSMASTER 1600 ACCESSORIES

TRACTION UNIT ACCESSORIES

04062 Light Kit

112-9282 Operator Presence Bail Kit (ANSI/CE req.)

115-1886 Traction Slow Down Kit

65-9000 Clip Kit

04123 Wheel Kit

117-0073 High Altitude Jet

115-4754 Wireless Hour Meter

120-9690 Wire Harness (for Wireless Hour Meter)

ROLLER & ROLLER SCRAPER OPTIONS

95-0930 Full Roller

65-8560 Front Roller Extension Kit

112-9290 Wiehle Roller Scraper

BEDKNIFE & BEDBAR OPTIONS

112-9275 Microcut Bedknife

117-1548 EdgeMaxTM Tournament Bedknife

94-5885 Tournament Bedknife

107-8181 Fairway Bedknife

104-2646 High Cut Bedknife

112-9278-03 Bedbar - Aggressive (Black)

99-4286 High Height of Cut Arm

STANDARD EQUIPMENT

93-9039 Narrow Wiehle Roller

112-9280-01 Bedbar - Standard (Red)

93-9015 Low Cut Bedknife

127-2206 8-Blade Reel (standard)

REEL OPTION

127-2207 11-Blade Reel

GROOMING OPTIONS

04134 Reverse Groomer Drive

125-3451 Forward Rotating Kit

04276 Greens Perfection Brush – Stiff

04286 Spring Steel Grooming Reel

04287 Carbide Grooming Reel

04288 Spiral Brush Grooming Reel

04742 Thin Blade Grooming Reel

TOOLS

04399 Turf Evaluator

125-5610

Paper – Reel

125-5611

Shim – Reel

94-9010

Height of Cut Bar Assembly