Toro Reelmaster 3100 D 03170 Specifications

: Toro Toro-Reelmaster-3100-D-03170-Specifications-138665 toro-reelmaster-3100-d-03170-specifications-138665 toro pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Reelmaster® 3100-D
The 3100-D triplex trim mower provides superb cutting, ultra comfort and ease of service – featuring
a unique rear engine layout and optional Sidewinder™ cutting units.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

59

Reelmaster® 3100-D Specifications*
REELMASTER 3100-D, MODEL 03170
ENGINE
CONFIGURATION
FUEL CAPACITY

REELMASTER 3100-D, MODEL 03171 w/SIDEWINDER

Kubota® liquid-cooled diesel, 3-cylinder, 21.5 hp (16 kW) net @ 2500 RPM. HIgh idle: 2,600 rpm, Low idle: 1,400 rpm (+/- 50 rpm). 68.5 cu. in. (1123 cm3)
displacement. Pressurized lubrication system with 3.5 U.S. qt. (3.3 liter) capacity. Heavy-duty, radial seal air cleaner. Fuel/water separator with visible bowl.
Rear mounted engine, front operator position. Rear mounted radiator. Two post ROPS and seat belt standard.
7.5 gallons (28 liters). Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).

TRACTION DRIVE

Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive
provides infinitely variable speed in forward and reverse. 6 gallon (23 liter) hydraulic system capacity.

GROUND SPEED

Mow: 0-6 mph (0-10 km/h); Transport: 0-9 mph (0-14 km/h). Reverse: 0-4 mph. (0-6 km/h).

CONTROLS
GAUGES
ELECTRICAL &
INTERLOCKS
TIRES
FRAME
BRAKES
STEERING
OVERALL
DIMENSIONS
CUTTING UNIT
CONFIGURATION

Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel lock, PTO switch, throttle, joystick
control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder equipped models), cutting unit transport lock, reel speed and
backlap control knob.
Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant
temperature warning lights (high temperature safety shut off).
12-volt, 585 cold cranking amps at 0° F (-18° C), 40 amps with regulator/rectifier. Traction pedal, operator presence in seat, PTO engage or disengage, and cutting
unit mow or transport safety interlock switches.
Front: 20 x 12-10, 4-ply Turf Tread. Rear: 20 x 10-10, 4-ply Turf Tread
Formed steel, welded steel and steel tubing.
Hydrostatic service brake, hand-operated parking brake.
Power steering with tilt steering wheel.
	
Track Width:	 55" (140 cm)	
Overall Height:	
	
Wheel Base:	 56" (142 cm)	
Transport Width:	
				
	
Overall Length:	 93" (248 cm)	
Approx. Weight with Cutting units:	

71" (180 cm) with ROPS
80" (203 cm) in 72" (183 cm) woc
92" (234 cm) in 85" (216 cm) woc
1860 lbs. (844 kg)

Fixed position cutting units.

Operator controlled moveable cutting units travel ±12" (30 cm)
left or right from center; total of 24" (61 cm) of infinite variability.

CUTTING UNIT
OFFSET

3" (7.6 cm) in 72" (183 cm) width of cut
10" (25 cm) in 85" (216 cm) width of cut

	Maximum 15" (38 cm) in 72" (183 cm) width of cut.
Maximum 22" (56 cm) in 85" (216 cm) width of cut.

CERTIFICATION

This product complies with the American National Standards Institute (ANSI B71-4 – 2012) and European Community
specifications (CE Certified). EN ISO 5395.

WARRANTY

Two-year limited warranty, refer to operators manual for details.

27" CUTTING UNITS (03180, 03181, 03183) / 32" CUTTING UNITS (03182)
TYPE

Three hydraulically-driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all three positions.

REEL BLADE OPTIONS

5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 8-blade reels available for 32" (81.3 cm) cutting unit.

HOC RANGE

Height of cut ranges .25" to 2" (.63 - 5.1 cm) standard in floating position, 1.5" to 2.5" (3.8 - 6.4 cm) in fixed position.

CUTTING WIDTH
CLIP FREQUENCY/
BACKLAPPING
BEDKNIFE-TO-REEL
ADJUSTMENT
ROLLERS

72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Dual point adjustment (DPA) of bedknife to reel.
Full roller standard on rear of cutting unit and plastic front Wiehle roller.

*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

60

The Reelmaster 3100-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.

Reelmaster® 3100-D Accessories*
CUTTING UNIT OPTIONS

TRACTION UNIT ACCESSORIES

BEDKNIFE OPTIONS

03180

27" (69 cm) 5-Blade DPA Cutting Unit

30358

Bimini Canvas Sunshade

114-9388

Standard (27") - Production

03181

27" (69 cm) 8-Blade DPA Cutting Unit

115-4754

myTurf Wireless Hour Meter Assembly

114-9389

Standard (32") - Production

03183

27" (69 cm) 11-Blade DPA Cutting Unit

112-8910

EdgeMax™ (27")

03184

27" (69 cm) Verticutter Cutting Unit

03182

32" (81 cm) 8-Blade DPA Cutting Unit

27" (69 CM) DPA CUTTING UNIT ACCESSORIES

®

32" (81 CM) DPA CUTTING UNIT ACCESSORIES

112-8956

EdgeMax™ (32")

03187

Rear Roller Brush Kit

114-9390

Heavy-Duty (27")

115-8282

5-Blade Service Reel

114-9391

Heavy-Duty (32")

114-9369

Rear Roller Scraper Kit

120-1641

Extended Low-Cut (27")

120-1642

Extended Low-Cut (32")

03186

Rear Roller Brush Kit

114-9373-03

Wiehle Roller Scraper

03185

Grass Basket Kit

114-9377

Comb/Scraper Kit

114-9368

Rear Roller Scraper Kit

115-0849

High HOC Brush

114-9372-03

Wiehle Roller Scraper

114-9384

Full Front Roller

114-9376

Comb/Scraper Kit

114-9387-03

Full Front Roller Scraper

119-0630

Shoulder Roller Asm

119-0640

Shoulder Roller Asm

114-9381-03

Shoulder Roller Scraper

114-9382-03

Shoulder Roller Scraper

114-9383

Full Front Roller

119-4288

Short Rear Roller Asm

114-9386-03

Full Front Roller Scraper

119-0646-03

Fixed Plate (2 per cutting unit)

119-4286

Short Rear Roller Asm

119-0649

Trim/HD Collar Kit (6 per roller)

115-0838

High HOC Brush

119-0635

RM3100 Tipper Roller Kit

119-0646-03

Fixed Plate (2 per cutting unit)

98-1852

Gauge Bar

119-0649

Trim/HD Collar Kit (6 per roller)

119-0635

RM3100 Tipper Roller Kit

98-1852

Gauge Bar

*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

61

The Reelmaster 3100-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:03:10 09:26:47-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:03:10 09:26:56-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:10 09:26:56-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:84afe28c-1677-3947-bb8b-632a623857fc
Instance ID                     : uuid:a6ffbb69-2d5a-124b-bb33-1e08c910936e
Producer                        : Adobe PDF Library 11.0
Page Count                      : 3

EXIF Metadata provided by EXIF.tools