Toshiba Client Solutions DCE37529A Tri-Mode Dual Band Mobile Telephone User Manual CDM 9000 OWNER S MANUAL

Toshiba Corporation Tri-Mode Dual Band Mobile Telephone CDM 9000 OWNER S MANUAL

EA96706 Users Manual Part 1

CDM-9000TRI-MODE, WEB BROWSING DIGITAL CDMA TELEPHONEOWNER’S OPERATING MANUAL555 Wireless Blvd., Hauppauge, NY 11788 • 631-233-3300 • http://www.audiovox.com© 2000 Audiovox Communications Corporation • Printed in Japan • 03/00
2TABLE OF CONTENTSTABLE OF CONTENTSSAFETY INFORMATION FOR WIRELESSHANDHELD PHONES .......................................... 6PRECAUTIONS ......................................................... 9SYSTEM CONFIGURATION................................... 10WRIST STRAP ATTACHMENT............................... 11BATTERY INSTALLATION ANDRECHARGING.................................................... 12To Attach the Battery Pack..................................... 12To Detach the Battery Pack ................................... 12To Recharge Battery ...............................................12FUNCTIONS ............................................................ 14External View ......................................................... 14Function of Keys .................................................... 15LCD Display Indication........................................... 15GETTING STARTED ............................................... 16Turning the Phone On/Off ...................................... 16Antenna Position .................................................... 16Receiving Signal Strength Indicator ( ) ............ 16Battery Level Indicator ........................................... 16Power Management ............................................... 16BASIC OPERATION................................................ 17Placing Calls ............................................................ 17To Place a Call ............................................................ 17To Terminate a Call ...................................................... 17Last Number Redial ..................................................... 17To Dial the Last Number Received .............................. 17Phonebook Dialing ...................................................... 17To Mute a Phone Conversation ................................... 17Speed Dialing .............................................................. 18Quick Dialing ............................................................... 18Emergency Call ........................................................... 18OneTouch Emergency Call .......................................... 19Emergency Call Mode ................................................ 19Receiving Calls ........................................................ 19To Receive a Call......................................................... 19Any Key Answering...................................................... 19Caller ID with Name .................................................... 20Automatic Calls-in-Absence Indicator.......................... 20Ringing Tone with Melody ............................................ 20Distinctive Ringing (Audible Caller ID) ......................... 20During Calls ............................................................. 20To Adjust the Earpiece Volume.................................... 20Scratch Pad Dialing ..................................................... 20Automatic Talk Timer ................................................... 21Call Waiting ................................................................. 21Three-Way Calling ....................................................... 21Standby .....................................................................21Clock Indicator............................................................. 21Clock Alarm ................................................................. 21Countdown Timer ........................................................ 21End to End Signaling .............................................. 22Touch Tone™ from Display .......................................... 22Touch Tone™ from Memory ........................................ 22PHONEBOOK OPERATION ................................... 23Phonebook Entry ..................................................... 23To Store a Number without Name ............................... 23Overwrite Warning ....................................................... 24Auto Hyphenation ........................................................ 24Manual Hyphenation ................................................... 25Automatic Storing into Phonebook .............................. 25To Store Dual Numbers in Phonebook ........................ 26To Store a Name with the Phone Number ................... 27Alpha Mode ................................................................. 27To Store a Ring Type with the Phone Number ............. 29
3Recall Menu.............................................................. 30Recall Menu Tree ......................................................... 30Phonebook Recall ................................................... 31Phonebook Address Mode .......................................... 31Phonebook Sort Scroll Mode ...................................... 31Phonebook Key Word Search Mode ........................... 32To Dial Dual Numbers ................................................. 33To Review Long Numbers ........................................... 33To Review Long Names ............................................... 33Prepending Dialing ...................................................... 33Phonebook Edit ........................................................34To Modify Numbers and Names .................................. 34To Move Numbers and Names .................................... 35To Change Priority of Dual Numbers ........................... 36To Erase Numbers and Names ................................... 36Secret Memory ......................................................... 37To Store a Secret Number ........................................... 37To Recall a Secret Number ......................................... 37Link Dialing .............................................................. 38To Store Linked Numbers in Phonebook ..................... 38To Place Calls using Linked Numbers ......................... 39Voice Activated Dialing (VAD) ................................ 40Voice Registration........................................................ 40Reviewing the Registered Name ................................. 41Voice Activated Dialing ................................................ 41To Register a Name to a Number Stored in Memory .......41To Delete the Registered Name .................................. 42Call History .............................................................. 42To Review Outgoing Call History ................................. 43To Review Incoming Call History ................................. 43To Review Scratch Pad................................................ 44To Save a Number to Phonebook................................ 44WEB BROWSING ................................................... 45Web Access................................................................. 45Browser Menu ............................................................. 45Alpha Entry in Browser Mode ...................................... 46MESSAGING FEATURES ....................................... 47Voice Mail ................................................................. 47Voice Mail Notification ................................................. 47To Display the Number of Voice Mail Messages.......... 48Voice Mail Dialing ........................................................ 48Text Messages (Short Message Service) .............. 49To Review a Text Message .......................................... 50FUNCTION MENU................................................... 51To Access Function Menu ...................................... 51Function Menu Tree ..................................................... 52Lock Features .......................................................... 53Security Code and Unlock Code ................................. 53Keypad Lock (F11) ...................................................... 53Phone Lock (F12) ........................................................ 54Automatic Phone Lock (F13) ....................................... 54To Unlock the Phone ................................................... 54To Change the Unlock Code (F14) .............................. 54Display Features ...................................................... 55Own Telephone Number Display (F21)........................ 55Backlight Control (Standby) (F22-1) ............................ 55Backlight Control (In-Use) (F22-2) .............................. 56Auto Hyphenation (F23) .............................................. 56SMS Text Lines Selection (F24) .................................. 56Contrast Control (F25) ................................................. 56Software Version Review (F26) ................................... 57Last Rescan SID Indicator (F27) ................................. 57PRL ID Review (F28) ................................................... 57Volume and Tone Controls ...................................... 57Alert Tone Volume Control (F31) ................................. 57Ring Type Selection (F32) ........................................... 58Key Tone Volume Control (F33) ................................... 58To Mute a Phone Conversation (F34).......................... 58Sending DTMF (F35) ................................................... 58Setting Tones (F36) ..................................................... 59Key Tone Length (F36-1) ............................................. 59Single Alert Beep Tone (F36-2) ................................... 59
4Voice Mail Alert (F36-3) ............................................... 59Text Message Alert (F36-4) ......................................... 60Caller ID Alert (F36-5) ................................................. 60Service Mode Alert (F36-6) ......................................... 60Voice Privacy Alert (F36-7) .......................................... 60One Minute Beep Tone (F36-8) ................................... 61Low Battery Alarm (F36-9) .......................................... 61Call Timers ............................................................... 61Last Call Timer (F41-1) ................................................ 61Outgoing Call Timer (F41-2) ........................................ 61All Calls Timer (F41-3)................................................. 62Lifetime Timer (F41-4) ................................................. 62Web Total Timer (F41-5) .............................................. 62Clock Indicator (F42) ................................................... 62Clock Adjustment (F43) ............................................... 62Clock Alarm (F44) ....................................................... 63Countdown Timer (F45) ............................................... 64System Features ...................................................... 65A/B System Selection (F51) ........................................ 65Enhanced Roaming ..................................................... 65NAM Selection (F52) ................................................... 66Force Analog Call (F53) .............................................. 66System Settings (F54) ................................................. 67NAM Name Display (F54-1) ........................................ 67Automatic NAM (F54-2) ............................................... 67Automatic Retry (F54-3) .............................................. 67Enhanced Voice Privacy Service (F54-4) .................... 68Anti Fraud Security Features ....................................... 68To Place a Call with the Manual PIN Entry .................. 69To Place a Call with the Automatic PIN Feature .......... 69To Place a Call to Voice Mailusing the Automatic PIN Feature ............................. 69To Turn the Automatic PIN Feature On/Off (F54-5) ..... 69To Program or Change your Automatic PIN (F54-6) ... 70Security Features .................................................... 70Call Restriction (F61) ................................................... 70To Change Emergency Numbers (F62) ....................... 70To Turn On/Off OneTouch EmergencyCall Feature (F63) ................................................... 71To Change the Security Code (F64) ............................ 71Reset Functions (F65) ................................................. 71Call Timer Reset (F65-1) ............................................. 71Phonebook All Clear (F65-2) ....................................... 72Call History All Clear (F65-3)....................................... 72Text Message & Voice Mail All Clear (F65-4) .............. 72Function Reset (F65-5) ............................................... 72Data Communications............................................. 72Data/Fax Mode (F71) .................................................. 72Web Browser Setup (F72) ........................................... 73Web Lock (F72-1) ........................................................ 73Web Backlight (F72-2) ................................................. 73Web Idle Timer (F72-3)................................................ 74Web Link IP Addresses (F72-4) (F72-5)...................... 74Web User Name (F72-6) ............................................. 74Web Password (F72-7) ................................................ 74Web Link Change (F72-8) ........................................... 74Web Browser (F73) ..................................................... 75Vibrator Alert ............................................................75Other Functions ........................................................75Quick Dialing (F01) ...................................................... 75Automatic Answering (F02) ......................................... 75Function Reset Status ............................................ 76INDEX ...................................................................... 79WARNING................................................................ 8012 MONTH LIMITED WARRANTY ......................... 81Quick Reference .................................................... 83ACCESSORIES ....................................................... 85Touch Tone™ is a registered trade mark of AT & T.
5AUDIOVOXCDM-9000AUDIOVOXCDM-9000Tri-Mode CDMA/AMPSHandheld PortableCellular TelephoneIn today’s fast paced world, it has become a necessityto have access to real-time information. Your communi-cations tools must provide you with this access fromanywhere and at anytime. With that in mind, Audiovoxdeveloped the CDM-9000, our first Tri-Mode Web Brows-ing wireless telephone.The CDM-9000 features 800 MHz Amps/CDMA and1900 MHz CDMA Tri-Mode operation for enhanced na-tionwide service coverage. The digital phone featurestwo easy to use soft keys that make surfing the web abreeze. The CDM-9000 also boasts a vibrating alert,voice recognition, and data capabilities. In addition, thephone features an enhanced phone book with 99 Al-pha/198 Numeric memory locations, one touch emer-gency dialing, 15 distinctive ringer options, and menudriven operation. And with a Lithium Ion battery provid-ing you with over 3 hours of talk time and 7 days ofstandby time, you’ll have plenty of opportunity to use allof these advanced features.The CDM-9000 cellular telephone has several optionalaccessories available, including: leather carrying case,extended Lithium Ion battery, cigarette lighter plug-incharger, desktop holder, AC adapter, Handsfree car kitand an earphone microphone and data cable.And, of course, your new CDM-9000 digital handsetprovides you with something only an Audiovox phonecan: the proven reliability that has made us one of theleading wireless handset providers.Please take a few moments to read the following pagesof the user’s operation manual. It will help you make themost efficient use of this valuable communications tool.
6SAFETY INFORMATION FORWIRELESS HANDHELD PHONESSAFETY INFORMATION FORWIRELESS HANDHELD PHONESRead this information before using yourhandheld portable Cellular Telephone.EXPOSURE TO RADIO FREQUENCY SIGNALSYour wireless handheld portable telephone is a lowpower radio transmitter and receiver. When it is ON, itreceives and also sends out radio frequency (RF) sig-nals.In August, 1996, the Federal Communications Commis-sion (FCC) adopted RF exposure guidelines with safetylevels for handheld wireless phones. Those guidelinesare consistent with the safety standards previously setby both U.S. and international standards bodies:•ANSI C95.1 (1992)•NCRP Report 88 (1986)•ICNIRP (1996)Those standards were based on comprehensive andperiodic evaluations of the relevant scientific literature.For example, over 120 scientists, engineers, and phy-sicians from universities, government health agencies,and industry reviewed the available body of research todevelop the ANSI Standard (C95.1). The design of yourphone complies with the FCC guidelines (and thosestandards).ANTENNA CAREUse only the supplied or an approved replacement an-tenna. Unauthorized antennas, modifications, or attach-ments could damage the phone and may violate FCCregulations.PHONE OPERATIONNormal Position: Hold the phone as you would anyother telephone with the antenna pointed up and overyour shoulder.•The meanings of the acronyms are:ANSI : American National Standards InstituteNCRP : National Council on Radiation Protectionand MeasurementsICNIRP: International Commission on NonionizingRadiation Protection
7Tips on Efficient Operation:For your phone to operate most efficiently:• Extend your antenna fully.• Do not touch the antenna unnecessarily when thephone is in use. Contact with the antenna affects callquality and may cause the phone to operate at ahigher power level than otherwise needed.DRIVINGCheck the laws and regulations on the use of wirelesstelephones in the areas where you drive. Always obeythem. Also, if using your phone while driving, please:• Give full attention to driving — driving safely is yourfirst responsibility.• Use handsfree operation, if available.• Pull off the road and park before making or answer-ing a call if driving conditions so require.ELECTRONIC DEVICESMost modern electronic equipment is shielded from RF sig-nals. However, certain electronic equipment may not beshielded against the RF signals from your wireless phone.PacemakersThe health Industry Manufacturers Association recom-mends that a minimum separation of six (6”) inches bemaintained between a handheld wireless phone and apacemaker to avoid potential interference with the pace-maker. These recommendations are consistent with theindependent research by and recommendations of Wire-less Technology Research.Persons with pacemakers: Should ALWAYS keep the phone more than six(6”) inches from their pacemaker when thephone is turned ON. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker tominimize the potential for interference. If you have any reason to suspect that interfer-ence is taking place, turn your phone OFF im-mediately.Hearing AidsSome digital wireless phones may interfere with somehearing aids. In the event of such interference, you maywant to consult your service provider [or call the cus-tomer service line to discuss alternatives.]
8Other Medical DevicesIf you use any other personal medical device, consult themanufacturer of your device to determine if they are ad-equately shielded from external RF energy. Your physicianmay be able to assist you in obtaining this information.VehiclesRF signals may affect improperly installed or inadequatelyshielded electronic systems in motor vehicles. Check withthe manufacturer or its representative regarding yourvehicle. You should also consult the manufacturer of anyequipment that has been added to your vehicle.Posted FacilitiesTurn your phone OFF in any facility where posted no-tices so require.AIRCRAFTFCC regulations prohibit using your phone while in theair. Switch OFF your phone before boarding an aircraft.BLASTING AREASTo avoid interfering with blasting operations, turn yourphone OFF when in a “Blasting area” or in areas posted“Turn off two-way radio”. Obey all signs and instructions.POTENTIALLY EXPLOSIVE ATMOSPHERESTurn your phone OFF when in any area with a poten-tially explosive atmosphere and obey all signs and in-structions. Sparks in such areas could cause an explo-sion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are of-ten but not always clearly marked. They include fuelingareas such as gasoline stations, below deck on boats,fuel or chemical transfer or storage vehicles using liq-uefied petroleum gas (such as propane or butane), ar-eas where the air contains chemicals or particles, suchas: grain, dust, or metal powders, and any other areawhere you would normally be advised to turn off yourvehicle engine.For Vehicles Equipped with an Air BagAn air bag inflates with great force. DO NOT place ob-jects, including both installed or portable wirelessequipment, in the area over the air bag or in the airbag deployment area. If in-vehicle wireless equipmentis improperly installed and the air bag inflates, seriousinjury could result.
9PRECAUTIONSPRECAUTIONSYour Handheld Portable Telephone is a high qualitypiece of equipment. Before operating the equipment,read all instructions and cautionary markings on (1) ACAdapter, (2) Battery and (3) Product using Battery.1. DO NOT use this equipment in an extremeenvironment where high temperature orhigh humidity exists.2. DO NOT abuse the equipment. Avoid strik-ing, shaking or shocking. When not usingthe unit, lay down the unit to avoid possibledamage due to instability.3. DO NOT expose this equipment to rain orspilled beverages.4. DO NOT use unauthorized accessories.5. DO NOT disassemble the phone or its ac-cessories;If service or repair is required,return the unit to an authorized Audiovoxcellular service center. If the unit is disas-sembled, the risk of electric shock or firemay result.6. To prevent injury or burns, DO NOT allowmetal objects to contact or short circuit thebattery terminals.7. DO NOT open the battery case. If the bat-tery is accidentally broken, avoid skin con-tact with the internal chemical contents. Ifthere is skin contact, wash the affected areaimmediately and seek medical advice.8. DO NOT put the battery close to, nor dis-pose it into fire.9. The product that you have purchased con-tains a rechargeable Battery. At the end ofits useful life, under various state and locallaws, it may be illegal to dispose of thisBattery into the municipal waste stream.Check with your local solid waste officialsfor proper disposal procedures in your area.
10SYSTEM CONFIGURATIONSYSTEM CONFIGURATIONSystem configuration and the equipment list are asshown below.List of EquipmentName of the EquipmentHandheld Portable TelephoneSlim Lithium Ion Battery Pack (BTR-4000)Desktop Holder (DTH-4000)AC Adapter (CNR-4000)Wrist StrapNo.12345RetractableWhip AntennaHandheld PortableTelephoneBattery PackWrist StrapDesktop HolderAC Adapter12435
11WRIST STRAP ATTACHMENTWRIST STRAP ATTACHMENTAttach the wrist strap to the phone through the straphole as shown below 1 .Then put the long loop through the smaller loop asshown below 2 .12
12BATTERY INSTALLATIONAND RECHARGINGBATTERY INSTALLATIONAND RECHARGINGTo Attach the Battery Pack1Insert the hook at the end of the Battery Pack intothe slot at the end of the phone.2Press the Battery Pack down to lock the Battery Packonto the phone.1212Release LatchTo Detach the Battery Pack1Slide back the Release Latch as shown below.2Lift up to remove the Battery Pack from the phonegently.To Recharge BatteryYour CDM-9000 has a built-in charger function. To re-charge the Battery Pack, always install the Battery Packto the Phone.1. Attach the Battery Pack to the Phone.2. Insert the DC plug of the AC Adapter (CNR-4000)to the Desktop Holder (DTH-4000). Plug the ACAdapter to AC outlet.3. Place the Phone with Battery Pack into the Desk-top Holder.
134. Then the recharging starts. The display indicates“now charging” with animation. You can see abattery level indicator scroll-ing at the upper-right of thedisplay.5. For complete recharging, itis recommended that the phone is turned off dur-ing recharging.6. When the recharging is completed, the displayindicates “fully charged”.7. It is normal that Battery Pack may become a littlewarmer during recharging.The recharging time, from empty to full, depends onthe environmental temperature, 0 to +35°C.Recharging Time1.5 to 2 h2.5 to 3.5 hBattery TypeSlim Lithium Ion (BTR-4000)Extended Lithium Ion (BTE-4000)Desktop Holder AC AdapterAlternatively you can recharge the Phone using ACAdapter as illustrated below.AC AdapterNote: Do not feed the power to the Phone without Bat-tery Pack.
14FUNCTIONSFUNCTIONSExternal ViewRcl FSTOS1 S2CLRV213ABC DEF546JKL MNOGHIPQRSVAD879TUVWXYZ0OPERWebTri-ModeRmRetractableWhip AntennaIncoming CallIndicatorEarpieceEarphoneMic JackDataConnectorGraphicDisplayEnd Key withPower On/OffClear KeyVoice MailAccess Key(Soft Key 2)Multi FunctionKeyUp-arrowRecallFunctionDown-arrowMicrophoneWeb BrowsingKeyPowerIndicatorReceivingSignalStrengthIndicatorDigitalModeIndicatorIN USEIndicatorRoamingIndicatorMessageIndicatorBattery LevelIndicatorSend KeyStore KeyMessageAccess Key(Soft Key 1)OneTouchEmergency KeyDigit KeysVoice ActivatedDialing KeyDCPower JackClock AlarmIndicator
15Function of KeysLCD Display IndicationTo enter Telephone Numbers,Names or special characters( or ).1 is also used for OneTouchEmergency feature.Key- Board ArrangementDigit KeysFunction KeysSEND key. To originate or receive a Call.END key. To terminate a Call and to turnthe phone ON/OFF.To recall phone numbers from memory.Also used as Left-arrow key.To be used with other keys to activatevarious special features. Also used asRight-arrow key.To control Earpiece audio level, Alert Toneand Key Tone.Also used as Up/Down-arrow keys.To store phone numbers in memory.To clear digits from the display or from amemory location.To review Text Messages or to learn howmany Voice Messages are in your VoiceMailbox. Also used as Soft key 1.To access your Voice Mail with only onekey. Also used as Soft key 2.Rcl FSTOCLRV213ABC DEF546JKL MNOGHIPQRSVAD879TUVWXYZ0OPERWebRcl FSTOS1 S2CLRVItems DescriptionsReceiving Signal Strength Indicator.The number of lines indicates the receivedSignal Strength, and is also used as aPOWER ON Indicator.Digital Mode Indicator. To indicate thephone is operating in digital mode.A Call is in progress.The phone is out of Service Area.The phone is out of the Home-Area.Message Indicator. To indicate that TextMessages are stored in memory or VoiceMessages are in your Voice Mailbox.Shows that Clock alarm or count downtimer is set up.Battery Level Indicator.Monitors the battery charge condition.Graphic full-dot matrix display with flexiblefont size in 2 to 4 lines.Rm
16GETTING STARTEDGETTING STARTEDTurning the Phone On/OffPress and hold . All the indicators and the digit dis-play will light momentarily, and a tone will be heard. Theindicator will stay while the phone is turned on.To turn the phone off, press and hold .Antenna PositionThe antenna can be used in its fully extended or fully re-tracted position only. It is recommended that the antennashould be fully extended for optimum performance andsignal strength or while operating in poor signal areas.Receiving Signal Strength Indicator ( )The number of lines indicates the Signal Strength inyour area. Four lines show the maximum level. The dis-play will vary as you move with the phone. If the signalis not strong enough to place a call, “ ” will appearon the LCD display.Battery Level IndicatorYou can always monitor the battery charge conditionwith the constant battery level indicator. The number ofblocks indicates the battery conditions as follows:Full chargeLow chargeFlashing indicates discharged.Power ManagementBatterySlim Battery(BTR-4000)Extended(BTE-4000)ModeDigitalAnalogDigitalAnalogTalk Timeup to Standby Timeup toThe operating times are approximate values and mayvary depending on network configuration and handsetusage.
17BASIC OPERATIONBASIC OPERATIONPlacing CallsTo Place a Call1. Enter the phone number.(A maximum of 32 digits willbe displayed.)2. Press .The indicator will light.•To Correct a NumberPress CLR to clear the last digit.Press and hold CLR to erase all the digits entered.•If the Call Fails to Go ThroughPress , and to redial the number.To Terminate a CallPress . The indicator will go out.Last Number RedialPress Rcl VAD to recall the last number you dialed,then press .See Call History on page 42 for details.To Dial the Last Number ReceivedPress Rcl Web to dial the last number with Caller IDyou received, then press .See Call History on page 42 for details.Phonebook DialingPress Rcl and enter an address (01 to 99) to recall anumber from your phonebook, then press .See Phonebook Recall on page 31 for details.To Mute a Phone ConversationPress F F to mute your conversation at any timeduring a call. “Mute” will be displayed.To return to normal conversation, press F Fagain.
18Speed DialingIf you know the phonebook address of the telephonenumber that you want to call, you may place a call with-out using Rcl .1. Enter the one or two digits of your Phonebook ad-dress (1 ~ 9 or 10 ~ 99).2. Press . The phone number will be displayed.The indicator will light, and the call will beplaced.Note: If two telephone numbers are stored in the ad-dress, the Primary Number will be dialed.Quick DialingWhen this feature is on, the Primary number in yourPhonebook address 02 to 09 can be dialed with justone push of the key. See Quick Dialing (F01) on page75 to turn this feature on/off.1. Press a digit key (2ABC to 9WXYZ) for more than onesecond.2. The number in your phonebook is automaticallydialed. The phone number will be displayed. The indicator will light.Note: The key 1 is not for Quick Dialing, but for OneTouch Emergency Call, page 19.Emergency CallThis feature permits you to place an emergency call evenif your telephone is in “Phone Lock”, “Keypad Lock” or“Restrict” mode. Up to 3 numbers can be programmed asEmergency numbers. The emergency numbers “911” and“911” are already preprogrammed. See To ChangeEmergency Numbers (F62) on page 70.Example: To Call 911 in “Phone Lock” or “Key-pad Lock” mode.1. Enter 9WXYZ 1 1 . The “911” will not be dis-played, but “Phone Lock” or “Keypad Lock” willbe displayed.2. Press .The “911” will be displayed.The indicator will light,and the call will be placed.
19OneTouch Emergency CallThis feature permits you to dial an emergency numberby a single key stroke, even in the “Phone Lock” or“Restrict” mode. This feature can be turned off to pre-vent unintentional calls to the emergency number.See To Turn On/Off OneTouch Emergency Call Fea-ture (F63) on page 71.1. Press and hold 1 for more than 2 seconds. Thenumber in emergency memory location “1” will bedialed.2. Then the indicator will light, and the call willbe placed. (The factory preset number is “911”.)Note: This feature cannot be used if the Keypad Lockis on. You need to dial all the digits and .Emergency Call ModeWhen you dial one of the 3 pre-programmed emergencynumbers, your phone will enter the Emergency CallMode. In this mode, the phone will attempt to completethe emergency call using any available cellular systemfrom which it can obtain service.After it places an emergency call, the phone will stay inthe Emergency Call Mode, and will display “Emer-gency Call Mode, END to exit”. In the Emergency CallMode, the phone will attempt to continue to receiveservice from the Cellular system that it used to com-plete the call. The phone will automatically exit theEmergency Call Mode after 5 minutes or after youpress END.Receiving CallsTo Receive a CallWhen the telephone rings, press to answer thecall. The indicator will light.Any Key AnsweringThis feature permits you to answer an incoming call bypressing any key on the key pad except and Rcl F .
20Caller ID with NameThis feature allows you to preview in your display thenumber and name of the party calling you before youanswer the call. The name is as you programmed it inyour phonebook.1. When the phone rings, the Calling Number ap-pears in the display.2. The last 10 Caller IDs arestored in the memory foryour review and redial. See Call History on page42 for details.Note: “Number Restricted” or “Number Unavailable”is displayed when the Caller ID is restricted ornot available.Automatic Calls-in-Absence IndicatorThis feature indicates the number of unanswered in-coming calls. If incoming calls are not answered, theLCD display will indicate “Called XX”. “XX” is the num-ber of calls (01 to 99) missed. Depressing any key willclear the display.Ringing Tone with MelodyThe CDM-9000 offers you 15 styles of ringer tones andmelodies for alerting incoming calls. Ringer volume canalso be adjusted. See Ring Type Selection (F32) on page58 and Alert Tone Volume Control (F31) on page 57 forsetting. See also Vibrator Alert (F8) on page 75.Distinctive Ringing (Audible Caller ID)You may program different ringer styles for differentphonebook addresses. See To Store a Ring Type withthe Phone Number on page 29 for setting.During CallsTo Adjust the Earpiece VolumeSimply press or to ad-just Earpiece Volume during a call.Scratch Pad DialingIf you enter a telephone number during a call, the num-ber will be stored in the Scratch Pad memory.
21After terminating the call, the number you entered canbe dialed by .Note: You can deactivate “Sending DTMF” so that key-pad tones will not be transmitted to the callingparty. See Sending DTMF (F35) on page 58.Automatic Talk TimerThe talk time of the current call will be automaticallydisplayed. For example, “1h23m45s”.Call WaitingYour service provider may provide Call Waiting service.When you are on a call, you may hear beep tone alert-ing you of another incoming call. Your phone displays“New Caller” and the new caller’s ID with the name.The name is as you programmed it in your phonebook.1. Press to answer the new call.2. Press again to switch between the two calls.Three-Way CallingYour service provider may provide Three-Way Callingservice. When a call is already in progress, you maycall the third party.1. Enter a number and press to call the thirdparty.2. Press again to connect all three parties.Ask your service provider for the detailed information.StandbyClock IndicatorDate and Time are automatically displayed, if this fea-ture is enabled. See Clock Indicator (F42) on page 62to turn this feature on/off.Clock AlarmThis feature alert you repeatedly at the alarm time thatyou programmed. See Clock Alarm (F44) on page 63for setting.Countdown TimerThis feature alerts you when the countdown timer ex-pires. The timer can be set to 1 through 99 minutes.See Countdown Timer (F45) on page 64 for setting.
22End to End SignalingTo utilize certain phone services, such as accessing analternate long distance network, signaling a pager orbanking by phone etc., Touch Tone™ signaling is re-quired. The following features will make it easy to sendfrequently used Touch Tone™ signals. See Link Dial-ing on page 38 for more information.Touch Tone™ from DisplayWhen Sending DTMF (page 58) mode is on, the num-bers will be sent in Touch Tone™ signals during a callas you press digit keys. When Sending DTMF mode isoff, you can send Touch Tone™ signals in the followingmanner.1. Enter the number.2. Press F and scroll to“TONE”.3. Press F . The number in the display will besent in Touch Tone™ signals.Touch Tone™ from MemoryTouch Tone™ signals can be sent from memory duringa call.1. Press Rcl , and recall thenumber you want to sendin Touch Tone™ signals.2. Press F and scroll to“TONE”.3. Press F . The number in the display will besent in Touch Tone™ signals.
23PHONEBOOK OPERATIONPHONEBOOK OPERATIONYour phone has an Enhanced Phonebook with 99 dual-number memory addresses. At each address, you canstore up to two telephone numbers under one name. Thisfeature allows you to store, under one name, a person’shome and office number, office and mobile number, etc.Stored numbers can be easily recalled and dialed bypressing . Numbers can also be marked Secret foradded privacy.Number of Digits per Phonebook AddressAddress01 to 9091 to 99NoteSingle Number orDual NumbersUp to 32 digitsUp to 32 digitsIncludes Dual Markand Manual HyphensLinked NumbersUp to 40 digitsUp to 80 digitsIncludes Link Marksand Manual HyphensPhonebook EntryTo program your phonebook, enter the information inthe following order. You may skip “Name”, “Option” and/or “Voice”.To Store a Number without Name1. Press CLR , then enter the phone number.2. Press STO STO , then enter the desired memoryaddress (01 through 99).Example: To store the phone number 1 2 3 4 5 6 78 9 0 in address 07.1. Press CLR .2. Enter 1 2ABC 3DEF 4GHI5JKL 6MNO 7PQRS 8TUV 9WXYZ0OPER .3. Press STO STO .4. Enter 0OPER 7PQRS and press F .Number Name Option VoiceAddressCLR STO STO
24Overwrite WarningWhen you attempt to store a number in an addresswhere another number has been already stored, youwill have “OVERWRITE” warning.Example: To store the number 9 8 7 6 5 4 3 2 1 0in the address 07, where another num-ber 1 2 3 4 5 6 7 8 9 0 is already stored.1. Press CLR .2. Enter 9WXYZ 8TUV 7PQRS 6MNO5JKL 4GHI 3DEF 2ABC 10OPER .3. Press STO STO .4. Enter 0OPER 7PQRS .The already stored numberis displayed momentarily.5. Two seconds later.6. If you accept to overwrite, scroll to “YES” andpress F F .7. If you do not want to overwrite, scroll to “NO”and press F . The screen returns to the step3 again.Auto HyphenationWith this feature on, hyphens are automatically insertedwhen you enter telephone numbers and when you re-call the numbers from the Phonebook. See Auto Hy-phenation (F23) on page 56 to activate or deactivatethis feature.Display Example123-456-78901-234-567-89012No hyphensLength of Number10 digits or less11 to 21 digits22 digits or moreNote: When you manually insert hyphens, the “AutoHyphenation” feature will not work for that par-ticular number.
25Manual HyphenationYou can manually insert a hyphen at any place whenyou enter a telephone number. The maximum numberis 32 digits long including hyphens.Example: To insert a hyphen in the number 1 2 34 5 6 7 to display it as 123-4567.1. Press CLR .2. Enter 1 2ABC 3DEF .3. Press F and scroll to“HYPHEN”.4. Press F .5.Enter 4GHI 5JKL 6MNO 7PQRS .Automatic Storing into PhonebookThis feature allows convenient automatic storing into avacant phonebook address.The number will be stored in the first available memoryaddress which will be indicated in the display. This fea-ture can prevent the possible overwriting of a previouslystored number.1. Enter the phone number.2. Press STO STO STO .Example:To store the phone number 1 2 3 4 5 6 7 89 0 into a vacant memory address 04.1. Press CLR.2. Enter 1 2ABC 3DEF 4GHI5JKL 6MNO 7PQRS 8TUV 9WXYZ0OPER .3. Press STO STO .
264. Press STO F .To Store Dual Numbers in PhonebookYou can store Dual Numbers with Dual Mark “ \ ” up to32 digits for all the address 01 to 99 in the phonebook.To store two telephone numbers in one phonebook ad-dress, enter the first number, select the Dual Mark “ \ ”by using Menu, then enter the second number.Example: To store the primary number 1 2 3 4 5 67 8 9 0 and the secondary number 9 8 76 5 4 3 2 1 0 in address 08.1. Press CLR .2. Enter 1 2ABC 3DEF 4GHI5JKL 6MNO 7PQRS 8TUV 9WXYZ0OPER .3. Press F and scroll to“DUAL MARK”.4. Press F .The Dual Mark “ \ ” is in-serted.5. Enter 9WXYZ 8TUV 7PQRS 6MNO5JKL 4GHI 3DEF 2ABC 10OPER .6. Press STO STO .7. Enter 0OPER 8TUV and press F .Note: You can add a second number after storing afirst number. See To Enter a Second Numberon page 34.Up to 32 digitsPrimary Number \ Secondary Number
27To Store a Name with the Phone NumberTo use this procedure, you will need to refer to “AlphaMode” below.1. Enter the phone number.2. Press STO to select the Alpha Mode.3. Enter the name.4. Press STO , then enter the memory address (01through 99) to store the number with the nameinto memory.Example: To store the phone number 1 2 3 4 5 6 78 9 0 with the name Mr. JACKSON intomemory address 11.1.Enter the phone number;1 2ABC 3DEF 4GHI 5JKL6MNO 7PQRS 8TUV 9WXYZ 0OPER .2. Set Alpha Mode; STO3. Enter the Name;6MNO for “M”,V 7PQRS 7PQRS 7PQRS for “r”,VAD 6MNO for “.”, V 5JKL for “J”, 2ABC F for“A”, 2ABC 2ABC 2ABC for “C”, 5JKL 5JKL for “K”,7PQRS 7PQRS 7PQRS 7PQRS for “S”, 6MNO 6MNO 6MNO Ffor “O”, and 6MNO 6MNO for “N”.4. Press STO .5. Enter 1 1 and press F .Alpha ModeYou can add an identifying name (“Alpha Tag” up to 2lines or 20 to 24 characters) to the phone numbers ateach phonebook address.To Enter Names using Alpha (Letters)1. Press CLR , then enter thephone number.2. Press STO .
284. To change from upper to lower case charactersor vice versa, press V during entry of Alpha.5. To enter special characters, press VAD or Weband a digit key to select characters from the tablebelow.Assigned Special CharactersKey12 ABC3 DEF4 GHI5 JKL6 MNO7 PQRS8 TUV9 WXYZ0 OPER1 pressBlankA / aD / dG / gJ / jM / mP / pT / tW / w02 press1B / bE / eH / hK / kN / nQ / qU / uX / x3 pressC / cF / fI / iL / lO / oR / rV / vY / y4 press23456S / s8Z / z5 press79147!+258?-/369_.=VAD147(<”258)>’369:&#Web3. Press digit key repeatedly to display the letter thatyou want. The following table shows which char-acter is assigned with each digit key. For example,to enter the letter “D”, press 3DEF once. For theletter “F”, press 3DEF 3 times.Assigned Alpha Characters6. If you make a mistake, press CLR to erase thelast character. Press and hold CLR to erase allthe characters on the display.7. Press F to move the cursor, which inserts ablank space after the last character.8. Press Rcl to move the cursor back to insert newcharacters.9. To exit the Alpha Mode, press .Note: You must enter the phone number first, then addthe name. Entering a number after the name willerase the name.
29To Store a Ring Type with the Phone Number(Distinctive Ringing)You can choose one of 15 ring types for each phonebookaddress. With this feature, you will be able to distin-guish who is calling by hearing the ringing tone. Thering type is selected while storing the number when theword “OPTION” appears.Example: To store a number with Ring Type #02in the address 12.1. Enter the phone number,and press STO STO .2. Press F and scroll to“RING TYPE”.3. Press F and scroll toone of the numbers, whichyou want to set.4. Press F and scroll tosample the different ringtypes.5. Press F to set the newring type.6. Enter 1 2ABC and press F .Notes: 1. If you have one number only, the step 3 isskipped.2. The “COMMON” shown in the step 4 is thering type you selected with the FunctionMenu. See Ring Type Selection (F32) onpage 58.
30Recall MenuPress Rcl key. The following “RECALL” menu willprompt you to recall the numberfrom the memory.•“ADDRESS” : Phonebook Address Mode•“SEARCH” : Phonebook Sort Scroll Mode orPhonebook Key Word Search Mode•“HISTORY” : Call History ModeRecall Menu TreeADDRESSSEARCH(Sort Scroll)(Key Word)HISTORYScratchPadPhone-bookOUTGOINGINCOMINGSCRATCHPADVIEW TEL#VIEW NAMEREPLAYMODIFYMOVEPRI. CHANGEERASEVIEW TEL#VIEW NAMESAVEERASEOutgoingHistoryIncomingHistory VIEW TEL#VIEW NAMESAVEERASEVIEW TEL#SAVEERASEMain Menu Sub-menuNotes: 1. The submenu “PRI.CHANGE” will be avail-able only when two telephone numbers arestored in that address.2. The submenu “REPLAY” will be availableonly when your voice is stored in that ad-dress.
31Phonebook RecallTo recall the numbers stored in your phonebook, youhave three methods: Address Mode, Sort Scroll Modeand Key Word Search Mode.Phonebook Address ModeThis mode is useful in finding a phone number by re-calling a specific address or by scrolling the Phonebook.1. Press Rcl .2. Enter the two-digit MemoryAddress.3. Press or to scroll.Note: The scroll feature will skip any vacant memoryaddress(es).Phonebook Sort Scroll ModeThis mode sorts and displays, in alphabetical order, tele-phone numbers stored with “Alpha Tags” (Names). Blankdigits on top will be disregarded for scroll.Example: To display the numbers stored in thememory alphabetically from “J”.1. Press Rcl .2. Press 5JKL for “J”.3. Press F .4. Press .5. Press .Note: When the Alpha Tag is 2 lines long, only the Al-pha Tag is displayed without the telephone num-ber. However, a call can still be made by simplypressing .
32Phonebook Key Word Search ModeThis mode searches and displays the character stringof Alpha Tags stored in the Phonebook. Any part of theAlpha Tag can be used for the search.Example: To search the character string AN storedin the Phonebook.1. Press Rcl .2. Press 2ABC for “A”.3. Press 6MNO 6MNO for “N”.4. Press F .5. Press .6. Press .7. Press .8. Press .Notes: 1. The key word can be searched regardlessof upper or lower case letters.2. When the Alpha Tag is 2 lines long, only theAlpha Tag is displayed without the telephonenumber. However, a call can be made bysimply pressing .
33To Dial Dual NumbersAfter the number is recalled in the display, it can beeasily called by pressing .•To dial the primary number, just press .•To dial the secondary number, press .Primary NumberSecondary NumberTo Review Long NumbersThis feature allows you to review all the digits of verylong numbers or numbers stored with Alpha Tags.1. Use any of the previously described Phonebooksearch modes to recall a number.2. Press F and scroll to “VIEW TEL#”, and theentire digits of the number will be displayed.To Review Long NamesThis feature allows you to review whole Alpha NameTag stored with dual numbers.1. Use any of the previously described Phonebooksearch modes to recall a number.2. Press F and scroll to “VIEW NAME”. Press F again, and all the characters of the Namewill be displayed.Prepending DialingThis feature will be convenient when you need to addan area code to the number in the phonebook.Example: To add 1 2 3 to a number 4 5 6 7 8 9 0.1. Recall the number.2. Enter 1 2ABC 3DEF .3. Press . Then the call is placed to 123-4567890.Note: The added digits will not be stored in the phone-book memory.
34Phonebook EditThis section guides you how to modify, move, changepriority and erase the phonebook contents.To Modify Numbers and NamesYou can modify any of the phonebook contents you havestored, including Phone Numbers, Names, Ring Type,Secret and Address.To Modify Phone NumbersRecall the number from the phonebook.Press F to select “MENU”, then scroll to “MODIFY”and press F. Enter the new digit(s) and delete theold digit(s) by pressing CLR . To move the cursor, press to left, to right.To Modify Alpha Name TagRecall the number and proceed to “MODIFY” as above.Press STO , and the Name Tag will appear by itself. PressCLR to clear the letter(s), and enter the new Name.To Modify AddressAfter you modified number/name, just press STO with-out entering new address, and the current phonebookaddress will be overwritten. If you enter a new address,and press STO, the modified number/name will be cop-ied to the new address, while the original address willremain unchanged.To Enter a Second NumberExample: To add the secondary number 9 8 7 6 54 3 2 1 0 in the address 07.1. Recall the number storedin the memory address 07.2. Press F and scroll to“MODIFY”.3. Press F .4. Press F and scroll to“DUAL MARK”.
355. Press F .The Dual Mark “ \ ” is in-serted.6. Enter 9WXYZ 8TUV 7PQRS 6MNO5JKL 4GHI 3DEF 2ABC 10OPER .7. Press STO STO .8. Press STO .The original number is dis-played momentarily.9. Two seconds later.10.Press F F tostore in the original ad-dress.To Move Numbers and NamesYou can move the phonebook contents to a new ad-dress. The original address will then be erased.Example: To move the number 1 2 3 4 5 6 7 8 9 0from the address 20 to 15.1. Recall the number storedin the address 20.2. Press F and scroll to“MOVE”.3. Press F .4. Enter 1 5JKL as a newaddress.
36To Change Priority of Dual NumbersYou can interchange the primary and the secondarynumbers in a phonebook address. The submenu“PRI.CHANGE” will only be available when two tele-phone numbers are stored in that address.Example:1. Recall the number.2. Press F and scroll to“PRI.CHANGE”.3. Press F .The display shows the sta-tus after change.4. Press F to decide it.Note: The primary number will be dialed when you useSpeed Dialing and Quick Dialing features.To Erase Numbers and NamesThis feature erases the number already stored in thePhonebook.Example: To erase the number 9 8 7 6 5 4 3 2 1 01 2 3 stored in the memory address 16.1. Recall the number storedin the memory address 16.2. Press F and scroll to“ERASE”.3. Press F F .The number is shownagain.4. Two seconds later thescreen is changed.5. To erase the number scroll to “YES”, otherwise“NO”, and press F .Primary NumberSecondary Number
37Secret MemoryTo Store a Secret NumberThis feature permits you to store a phone number thatyou want to keep secret in your phonebook. The secretnumber can be accessed only by entering the securitycode (see page 53).Example: To store the phone number 1 2 3 4 5 6 78 9 0 in address 30 as a secret number.1. Press CLR .2. Enter 1 2ABC 3DEF 4GHI5JKL 6MNO 7PQRS 8TUV 9WXYZ0OPER .3. Press STO STO .4. Press F and scroll to“SECRET”.5. Press F .6. Press F to put a mark“ ” on the number to besecret.7. Press STO .8. Enter 3DEF 0OPER and press F to store it.To Recall a Secret NumberExample: To recall the number 1 2 3 4 5 6 7 8 9 0stored in the address 30.1. Use Phonebook SearchMode to recall a secretnumber.
38Up to 40 or 80 digitsL01 = =L02 L0331 digits or less 31 digits or less 31 digits or less2. Press F .3. Enter the four-digit secu-rity code and press F .Link DialingThis feature permits you to link groups of numbers tobe sent in sequence. The linked numbers can be storedin memory. When dialed, the first group of numbers willbe sent in digital signaling, and the rest of the numberswill be sent in Touch Tone™ group by group each timeyou press .To Store Linked Numbers in PhonebookLinked Numbers can be stored using any of the proce-dures described under memory operations (at a spe-cific address, with a Name Tag, at the next vacantmemory location or as secret). The only difference is,that a Link Mark “ = ” must be entered between thelinked numbers. The link mark is entered using the keysequence F F .You can store Linked Numbers with Link Marks “ = ” upto 40 digits for the address 01 to 90, and up to 80 digitsfor the address 91 to 99 in the phonebook.The example on the next page shows how to store aLinked number at a specific memory address.1. Enter the first number.2. Press F F . A link mark “ = ” will be addedat the end of the number.3. Enter the second number. If you wish to link addi-tional number(s), return to 2.4. Press STO STO , then enter the memory address(01 ~ 99).
39Example:To link 3 numbers and store in Address 35.1. Enter 7PQRS 4GHI 6MNO 3DEF4GHI 7PQRS 9WXYZ .2. Press F .3. Press F .4. Enter 1 2ABC 3DEF .5. Press F .6. Press F .7. Enter 1 2ABC 3DEF 4GHI5JKL 6MNO 7PQRS 8TUV 9WXYZ0OPER .8.Press STO STO 3DEF 5JKL F .Note: While entering a linked number, you may reviewall the parts of that number, even those alreadyentered.Press F, scroll to “VIEW TEL#” and press F . The linked numbers you have just enteredwill be displayed one by one each time you press F .To Place Calls using Linked Numbers1. Press Rcl , and select the linked number you wantto call. (See Phonebook Recall on page 31.)2. Press . Then the indicator will light as thefirst number is dialed.3. Press . The second linked number will besent in Touch Tone™ signals. Succeeding num-bers can be sent sequentially by pressing again.
40Voice Activated Dialing (VAD)With this feature, you can make a call from your phonebookby just saying the name. You can register, in your ownvoice, names for up to 20 numbers in your phonebook.Voice RegistrationExample: Store the telephone number 1 2 3 4 5 67 8 9 0, and register the name “Katie”.1. Enter the telephone number (1 2 3 4 5 6 7 8 9 0).2. Press STO STO STO .3. Press F .4. After you hear the voiceprompt, “Name, please”,speak “Katie” into the microphone of the hand-set. You will hear back “Katie” repeated from thehandset.5. After you hear the voice prompt, “Again”, repeatthe name “Katie”. You will hear “Katie” repeatedfrom the handset again.6. If the registration is successful, you will hear theprompt “Entry Completed”.7. Your voice registration sta-tus is displayed.8. And your phonebook sta-tus is displayed.Notes: 1. Please register names with your normal toneof voice, and in a quiet environment.2. For better recognition, it is recommendedthat very similar sounding names should notbe registered.3. The maximum length of names that thephone will accept is 2 seconds.4. The same person’s voice that was used torecord the names must be used for dialing,otherwise the VAD feature may not workproperly.
41Reviewing the Registered Name1. Press Rcl to recall thenumber from thephonebook.2. Press F and scroll to “REPLAY”.3. Place the phone near your ear, and press F .4. You will hear the registered name.Note: Addresses with voice are marked with “V”.Voice Activated DialingExample: Dial the number by speaking “Katie”.1. Press and hold VAD .2. Listen to the phone say “Name, please”, thenspeak into the microphone “Katie”.3. You will hear from the phone, “Calling Katie”.4. Katie’s number in the phonebook will be auto-matically dialed.Notes: 1. If you hear “Did you say ‘Katie’ ?”, pleaseanswer to it “Yes” or “No”.2. When you use this feature through car kitoption, it is recommended that you speakslightly louder for better recognition.To Register a Name to a Number Stored in Memory1. Press Rcl to recall the number from thephonebook.2. Press F , scroll to “MODIFY” and press Fagain.3. Press STO STO STO .4. After the screen displays “PHONEBOOK OVER-WRITE”, press F .5. You will have on the screen “VOICE DATAENTRY”.6. Press F and go to the step 4 of Voice Regis-tration on page 40.Note: In case dual numbers or linked numbers arestored in the phonebook, the primary number orthe first number can be dialed using VAD.
42MemoryOUTGOINGINCOMINGSCRATCHPADDescriptionLast 10 numbers you dialed. Address01 to 10.Last 10 numbers you answered ormissed. Address 01 to 10.Last 3 numbers you wrote during calls.Address 01 to 03.To Delete the Registered Name1. Press Rcl to recall the number from thephonebook.2. Press F , scroll to “ERASE” and press Fagain.3. Scroll to “VOICE DATA” and press F .4. You will have on the screen “VOICE DATAERASE”. Scroll to “YES” and press F .Call HistoryThis feature recalls outgoing Call History and incomingCaller ID numbers. This is convenient for redialing re-cently called numbers or for returning missed calls byusing the stored Caller ID. (See Caller ID with Nameon page 20.)Call History MemoriesYou can access the memory in two ways, Scroll andShortcut.By Scrolling1. Press Rcl and scroll to“HISTORY”.2. Press F and scroll tothe menu item you want.3. Press F to select.4. To review the numbers in memory, scroll with or .5. After a number is displayed, it can be easily di-aled, by simply pressing .
43Shortcut:• Press Rcl VAD to display the latest number in theoutgoing history memory.• Press Rcl Web to display the latest number in theincoming history memory.To Review Outgoing Call HistoryExample:To recall a number from Outgoing History.1. Press Rcl VAD .The most recent call is dis-played.2.Scroll with or to review other numbers.3. You can place a call by simply pressing .When duplicate numbers are called, only the latest callis stored in the outgoing call history memory.To Review Incoming Call HistoryExample: To recall a received Caller ID fromMemory Stack.1. Press Rcl Web .The most recent call is dis-played.2. Press . A time stampis shown, if available.3. Press .A name is shown, if avail-able in your phonebook.4. You can place a call by simply pressing .In the incoming call history, the calls are marked with “ ”or “ ”. Numbers with “ ” represent calls you missed,and numbers with “ ” represent calls that you answered.When duplicate numbers are received, only the latestcall is stored in the incoming call history memory.
44To Review Scratch PadExample:1. Press Rcl F F .2. Scroll with or to review other num-bers.3. You can place a call by simply pressing .To Save a Number to PhonebookThe numbers of Call History and Scratch Pad Memorycan be stored in your phonebook. You can add a namein the same way as “MODIFY”. See To Modify Num-bers and Names on page 34.Example: To save a received Caller ID to Phone-book.1. Recall a number.2. Press F and scroll to“SAVE”.3. Press F .4. Press STO STO .5. Enter 4GHI 0OPER as an ad-dress, and press F .
45WEB BROWSINGWEB BROWSINGWhen operating in the Digital mode, you can access vari-ous internet websites directly from your cellular phone.Please contact your Service Provider for details of the avail-able services. See Web Browser Setup (F72) on page 73.Web Access1. Press and hold Web . The Web Browser will start.The cached information may be displayed.2. To access the network,press and hold CLR while indicator is on. Yourphone will display yourservice provider’s website with a flashing .3. Scroll the page by or .4. Press S1 or VS2 to select the menu option inthe bottom line of the display.5. To return to the previous page, press CLR .6. To terminate the network access, press . The indicator will go out. You can still browse thecached information.7. Press again to close the web browser.Browser MenuPress Rcl key while the browser is active to see thebrowser’s local menu.1. Help: To get help informa-tion.2. Home: To get back to the Home page. Press andhold CLR will do the same.3. Mark Site: To store the current page in your book-mark list.4. GoTo URL: To input URL (Uniform Resource Lo-cator), and access that page.5. Show URL: To display the URL of the currentpage.6. Restart: To clear the cache memory in yourbrowser.7. Phone.com: To display theversion of your browser.8. Advanced: To use for security.
46Alpha Entry in Browser Mode“Alpha” mode will automatically be active when it is nec-essary to enter alphabet character such as URL.Example:ALPHA/alpha — Alphabet ModePress F to switch upper and lower cases. Press to move the cursor to left, and to right. To exit theAlphabet Mode, press VS2 .SYM — Symbol ModeBy pressing S1, “SYM1” (symbol) mode will be ac-tive. Scroll “SYM1” to “SYM4” by or , and pressthe corresponding digit key (1 to 9WXYZ) to select.NUM — Numeric ModePress S1 S1 to set “NUM” (numeric) mode. PressS1 again to reset to “Alpha” mode.Alphabet ModeSymbol ModeSYM1SYM2SYM3SYM41.@;~Key12 ABC3 DEF4 GHI5 JKL6 MNO7 PQRS8 TUV9 WXYZ0 OPER1 pressBlankA / aD / dG / gJ / jM / mP / pT / tW / w02 press1B / bE / eH / hK / kN / nQ / qU / uX / x.3 press@C / cF / fI / iL / lO / oR / rV / vY / y,4 press/23456S / s8Z / z?5 press:79!VADWeb@.-,_?/!$’%”(;):+2!#<`3?:>ˆ4,/=|5-$[\6’&]7”%_8(+{9)}
47MESSAGING FEATURESMESSAGING FEATURESYour CDM-9000 Audiovox Cellular Telephone has beenengineered to operate with the latest technology that willallow you to enjoy the benefit of Voice Mail Notificationand Text Messages. Please note that operation of thesefeatures depends on the Cellular System and thereforemay not be available in all areas.Message IndicatorA message indicator shows you the current statusas explained below.In addition to the indicator, whenever your VoiceMail contains unreviewed messages, you will occasion-ally hear a short beep as a reminder.Voice MailVoice Mail NotificationYour cellular telephone notifies you when new messagesare in your Voice Mail. When messages are left in yourVoice Mail, the indicator at the upper right of thedisplay flashes to alert you.Normal Voice Mail NotificationWhen your phone is notified by the cellular system thatthere are messages in your Voice Mail, the followingoccurs.1. The phone sounds a short beep tone.2. The indicator at the upper right of the displayflashes to alert you.The display indicates“NEW MESSAGE” withanimation.3. The Phone’s Memory Stack is updated as to thenumber of unreviewed messages in your Voice Mail.You have new Text Messages or new VoiceMail Notification.You have Text Messages or Voice MailNotification, which you have seen already.Neither Text Message nor Voice Mail Notifi-cation.FlashingSteadyoff
48Voice Mail Notification with Mail Retrieval Service (MRS)1. The phone sounds a shortbeep tone.2. Press to answer the incoming call, yourphone will be connected to your Voice MessageService so that you may retrieve your messages.3. If you choose not to answer the incoming call,“Message Retrieval” will be stored in the stackfor retrieval of your messages at a later time.To Display the Number of Voice Mail MessagesExample:1. Press . A mark “ ” isflashing, when a new mes-sage is available.2. Press F to select“VOICE”.The number of messagesin your Voice Mail will be displayed.3. If a Text Message is attached to the Voice MailNotification, the Text Message can be reviewedby F . Otherwise this step is skipped.4. Press F . Scroll to “QUIT”or “ERASE” the notificationyou reviewed.5. Press F .6. To erase the Voice MailNotification, scroll to “YES”,otherwise “NO”, and press F .Voice Mail DialingYou can store one set of linked numbers in a speciallyprovided memory, and access these numbers with onetouch of the “Voice Mail Access” key V .
49To Store the Voice Mail Access NumberPlease see To Store Linked Numbers in Phonebookon page 38, and follow the steps 1 ~ 3 to make a set oflinked numbers. Press STO STO V F to store.Up to 80 digits of linked numbers can be stored includ-ing link mark “ = ”. You can also add a Name Tag (up to20 to 24 characters) with your voice mail number. (SeeTo Store a Name with Phone Number on page 27.)To Call Your Voice Mail1. Press and hold V . The first number will be dis-played and dialed.2. Press V . The second number will be displayedand sent in Touch Tone™ signal.3. The succeeding numbers can be sent sequentiallyby pressing V .To Review the Voice Mail Access Number1. Press Rcl to select the Phonebook AddressMode.2. Press V . The first linked number in V will bedisplayed.3. Press F (one or more times) to display the re-maining linked numbers in V .Text Messages (Short Message Service)Your phone is able to receive and display Text Mes-sages of up to 255 characters long. The Text Messagememory stack can store up to 30 messages. When anSMS message is received, the following occurs.1. A short beep tone sounds.2. The indicator at the upper right of the displayflashes to alert you.The display indicates “NEWMESSAGE” with animation.3. The Text Message just re-ceived is stored in the Memory Stack. To reviewstored messages, see To Review a Text Messageon page 50.4. If the Memory Stack is full, any new Text Messageswill not be stored, and youwill have the display:
50To Review a Text MessageText messages are stored in the address 01 to 30 in thememory stack. The address 01 has the last message.Every message moves to the next address when a newmessage is stored.Example: To display a Text Message stored in theMemory Stack.1. Press and scroll to“TEXT”. You have now 10Text Messages out of 30memories. A mark “ ” isflashing, when a new message is available.2. Press F . The first TextMessage is displayed. Alonger message will be au-tomatically scrolled every 6 seconds.3. Press F or wait for 6seconds to review an op-tional information.4. Press F or wait for 6seconds. If a CallbackNumber is displayed, youcan dial it by simply pressing .5. Press F and scroll“QUIT” or “ERASE” for themessage that you just re-viewed.6. Press F to select.7. To erase the Text Message, scroll to “YES”, oth-erwise “NO”, and press F .8. To review another message, scroll with or .Note: New Text Messages are marked with “ ”. TextMessages you have already reviewed aremarked with “ ”.
51FUNCTION MENUFUNCTION MENUTo Access Function MenuVarious phone settings can be changed through Func-tion Menu to customize your phone’s functions to fit yourconvenience. See Function Menu Tree in the follow-ing page. You can reach the Function you want to ac-cess in two ways; Scroll and Shortcut.By Scrolling1. Press F to enter MainMenu.2. Scroll with or key to the desired item inthe Main Menu.3. Press F to enter thesubmenu.4. Scroll with or key to the desired item inthe submenu.5. Press F to enter the function.By ShortcutEach Function has its shortcut number for direct ac-cess. For example, to enter the function “RING TYPE” (F32),press F 3DEF 2ABC .To Exit from Function Menu• To return from a submenu to the main menu, pressRcl .• To exit from Function Menu, press .Notes: 1. A mark “ ” at the right in a menu promptyou that you can see its detailed items bypressing F .2. A mark “ ” shows the current setting ofthe function.
52Function Menu Tree1: LOCK 1: KEY LOCK (F11)2: LOCK (F12)3: AUTO LOCK (F13)4: LOCK CODE (F14)3: TONES 1: RING VOL. (F31)2: RING TYPE (F32)3: KEY VOL. (F33)4: MUTE (F34)5: DTMF SEND (F35)6: SETTINGS (F36)1: STANDBY2: IN-USE2: DISPLAY 1: MY NUMBER (F21)2: BACKLIGHT (F22)3: HYPHEN (F23)4: SMS LINES (F24)5: CONTRAST (F25)6: VERSION (F26)7: LAST SID (F27)8: PRL ID (F28)1: LAST CALL2: OUTGOING3: ALL CALLS4: LIFETIME5: WEB TOTAL4: TIMES 1: TIMERS (F41)2: CLOCK (F42)3: ADJUST (F43)4: ALARM (F44)5: C.D TIMER (F45)Main Menu Submenu Branch1: KEY TONE2: BEEP ALT.3: VOICEMAIL4: TEXT MSG.5: CALLER ID6: SERVICE7: PRIVACY8: MINUTE9: LOW BATT.0: OTHER 1: QUICK DIAL (F01)2: AUTO ANS. (F02)3: ABSENCE (F03)4: ABS. TIMER (F04)5: SYSTEM 1: A/B SW. (F51)2: NAM CHG. (F52)3: ANALOG (F53)4: SETTINGS (F54)1: NAM NAME2: AUTO NAM3: RETRY4: PRIVACY5: AUTO PIN6: PIN CODE6: SECURITY1: RESTRICT (F61)2: EMER. # (F62)3: [1] EMER. (F63)4: SEC. CODE (F64)5: RESET (F65)7: DATA/FAX1: MODE (F71)2: WEB SETUP (F72)3: BROWSER (F73)8: VIBRATOR1: TIMERS2: PHONEBOOK3: HISTORY4: TXT/VOICE5: SETTINGS1: LOCK2: BACKLIGHT3: IDLE TIMER4: WEB LINK A5: WEB LINK B6: USER NAME7: PASSWORD8: LINK CHG.
53Lock FeaturesSecurity Code and Unlock CodeYour phone is equipped with the Security Code and theUnlock Code to access various security features. Youmay change the preset codes for added protection.CodeSecurityCodeUnlockCodePreset12341234DescriptionTo access Secret Number, to set CallRestriction, etc.To unlock the PhoneWhen “SECURITY CODE:” isdisplayed, you need to enteryour four-digit security code.See To Change the Security Code (F64) on page 71.See To Change the Unlock Code (F14) on page 54.Keypad Lock (F11)This mode is useful for preventing inadvertent pressingof keys. (For example, when the phone is in a purse orpocket.)With this feature on, the following functions are still avail-able.• Incoming calls can be answered with .• Programmed emergency numbers can be called.(Except for OneTouch Emergency Call.)When this feature is on, the following functions are notavailable.• Automatic Answering• Any Key Answering• OneTouch Emergency Call• Quick Dialing• Turning off the phone by .To Activate/Deactivate this Feature:1. Press F 1 1 toactivate “Keypad Lock”mode.2. Press F 1 1 again to deactivate.
54Phone Lock (F12)This mode is useful to prevent unauthorized use of thephone. With this feature on, the following functions arestill available.• Incoming calls can be answered with .• Any Key Answering• Programmed Emergency Call• OneTouch Emergency Call• Turning off the phone by .The following functions are not available when this fea-ture is on.• Automatic Answering• Quick DialingTo Activate:1. Press F 1 2ABC toactivate “Phone Lock”mode.Note: The phone will remain locked even if the poweris turned off.Automatic Phone Lock (F13)If you activate this feature, the phone will automaticallygo into the phone lock condition after it is turned off.(See Phone Lock (F12) above.) When you turn thephone on, you must enter the four-digit unlock codebefore it operates. (See To Unlock the Phone below.)1. Press F 1 3DEF .2. You can turn this featureon/off by or .3. Press F to set.To Unlock the Phone1. Enter the four-digit unlock code.2. The “Phone Lock” indicator will go out.To Change the Unlock Code (F14)1. Press F 1 4GHI .2. Enter the four-digit security code and press F .3. The current unlock codewill be displayed.4.Enter a new four-digit unlockcode and press F .

Navigation menu