Toshiba Client Solutions UPA3490G3 CDMA Cell-PCS Module User Manual Final RF exposure statement
Toshiba Corporation CDMA Cell-PCS Module Final RF exposure statement
Contents
- 1. 3G Manual
- 2. Final RF exposure statement
- 3. CRN 30615 Q1 Notebook User Manual
- 4. WWLAN at secondary portrait display mode
- 5. TECRA M7 User Manual
- 6. PA3490U manual addendum
- 7. Revised TecraM7 Manual 1
- 8. Revised TecraM7 Manual 2
- 9. Revised PA3490U addendum
- 10. Wireless WAN Guide
- 11. User Manual
- 12. WWAN Manual
Final RF exposure statement
Regulatory Notice
USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by tuning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
TOSHIBA is not responsible for any radio or television interference caused by unauthorized
modification of the devices included with this equipment, or the substitution or attachment
of connecting cables and equipment other than specified by TOSHIBA.
The correction of interference caused by such unauthorized modification, substitution or
attachment will be the responsibility of the user.
Canada
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
RF Exposure Statement
This tablet PC has been tested and complied to the FCC limits of SAR ( Specific Absorption
Rate ) regarding 47 CFR Part 2 section 2.1093 and RF exposure limits as specified in
Industry Canada RSS 102.
When this equipment is used in Secondary Portrait mode, the RF transmission of
Wireless WAN will be suspended.