Toshiba Client Solutions UPA3490G3 CDMA Cell-PCS Module User Manual PA3490U addendum

Toshiba Corporation CDMA Cell-PCS Module PA3490U addendum

Revised PA3490U addendum

USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the distance between the equipment and the receiver. -Connect the equipment to outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this equipment, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. The transmission antenna used for the Wireless WAN (EVDO) adapter in this notebook computer is located at the higher-right portions of the LCD screen. The total radiated energy from all the antennas connected to the Wireless WAN adapter (Model:PA3490-1EVD), the Bluetooth module(Model:PA3418U-1BTM), and the Wireless LAN cards (Model:PA3489U-1MPC) conforms to the FCC limit of the SAR requirement regarding 47 CFR Part 2 section 1093. Canada Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003.

Navigation menu