Toshiba Power Systems Inspection Services RX RF 2.4G USB Dongle User Manual
Toshiba Power Systems Inspection Services Co.,Ltd. RF 2.4G USB Dongle
Users Manual
KING WINS TECHNOLOGY CO.,LTD. User Manual Name: RF 2.4G Remote Controller Model No.: TMRCD200TX Name: RF 2.4G USB Dongle Model No.: TMRCD200RX Trade Mark: TOSHIBA Version: 1.0 KING WINS TECHNOLOGY CO.,LTD. Product Profile 1. RF2.4G Remote Controller. 2. RF 2.4G USB Dongle. KING WINS TECHNOLOGY CO.,LTD. ◎Electrical Characteristic Transmit rate USB Dongle Frequency Power out Function Controller 250KHz bps 2404.0MHz – 2480.0MHz ‐18dBm ‐ 0dBm HID‐compliant device, Modulation GFSK Transmit rate 250KHz bps Frequency Power out 2404.0MHz – 2480.0MHz ‐18dBm ‐ 0dBm Function Modulation 2.4G Wireless Transmission GFSK KING WINS TECHNOLOGY CO.,LTD. ◎The key value is default as below: RF Code Button Function Usage Page(Hex) Usage ID(Hex) Home(F7) 07 3C Back(F2) 07 3B Menu(F3) 07 3C Up 07 52 Left 07 50 Right 07 4F Down 07 51 Ok(F6) 07 3F Volume Dec(F4) 07 3D Volume Inc(F5) 07 3E KING WINS TECHNOLOGY CO.,LTD. ◎FUNCTION DESCRIPTION 1. The remote controller transmits RF signal to USB receiver dongle. 2. USB Dongle The dongle is defined as standard HID device. When it plug into PC USB port, the USB Dongle will receive RF signal from remote controller transmitter. 3. Pair ■ Power on the Controller, press “ “ ” continuously then press ”buttons ,pair mode is on. ■Plug USB dongle into and wait about 3 seconds, then press any key function, then pairing is successful. ◎ POWER CONSUMPTION 1. Normal mode When User operates the controller, it’s in normal mode; power consumption is less than 20mW. 2. Sleeping mode If user hasn’t used the controller for 1 SECS, it will enter sleeping mode, power consumption is less than 0.1mW. User can press any button to wake it up. KING WINS TECHNOLOGY CO.,LTD. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modify to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. KWS declares that this Radio‐Frequency peripheral is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2015:05:26 10:21:59+08:00 Create Date : 2015:05:26 10:21:59+08:00 Format : application/pdf Title : Microsoft Word - User Manual Creator : Administrator Document ID : uuid:198bbaae-aa61-4766-af6c-2f46b3da488f Instance ID : uuid:8860c836-95ba-4da3-9ac4-94d7486b2f93 Page Count : 6 Author : AdministratorEXIF Metadata provided by EXIF.tools