Toshiba Dvd Recorder Dr430 Owners Manual Use And Care

2014-12-13

: Toshiba Toshiba-Dvd-Recorder-Dr430-Owners-Manual-128968 toshiba-dvd-recorder-dr430-owners-manual-128968 toshiba pdf

Open the PDF directly: View PDF PDF.
Page Count: 103

DownloadToshiba Toshiba-Dvd-Recorder-Dr430-Owners-Manual- Dr430 Use And Care Manual  Toshiba-dvd-recorder-dr430-owners-manual
Open PDF In BrowserView PDF
Function Setup
2009/12/14 18:38:05

Others

E7PEAUD_DR430KU_cover_EN.indd 2-3

© 2010 Toshiba Corporation

Editing

* 1 V M N 2 8 9 5 8 *

Playback

Model number:
Serial number:

Recording

1VMN28958 / E7PEAUD ★★★★★
Printed in China

TOSHIBA DVD VIDEO RECORDER
Disc
Management

Owner’s Record
The model number and serial number are on the back
of this unit. Record these numbers in the spaces
below. Refer to these numbers whenever you
communicate with your Toshiba dealer about this unit.

Basic Setup

OWNER’S MANUAL

Connections

DR430KU

DVD VIDEO RECORDER

Introduction

DR430KU

PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

The important note is located on the rear or bottom of
the cabinet.

The symbol for CLASS ll (Double Insulation)

IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

Additional Safety Instructions
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and
serious damage to the apparatus.
19. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal
injury and apparatus malfunction.
20. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the
smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
21. While it is thundering, do not touch the connecting cables or the apparatus.
22. Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.
23. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

2

EN

E7PEAUD_DR430KU_EN.indd 2

2009/12/14 18:31:39

Introduction

PRECAUTIONS
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.

Connections

RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.

Basic Setup

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Disc
Management

ALWAYS plug the product into an outlet that is located in such a manner that it can be easily unplugged in
case the product requires service.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Recording

LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.

Playback

IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Editing

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.

To Avoid the Hazards of Electrical Shock and Fire
Function Setup

• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.

Location and Handling

EN
E7PEAUD_DR430KU_EN.indd 3

Others

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

3

2009/12/14 18:31:43

PRECAUTIONS
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.

Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.

Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD recorder, please contact Toshiba Customer Service.

Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

Supplied Accessories
remote control with
AA (1.5 V) battery x 2

RCA audio/video cables

owner’s manual

quick setup guide

OWNER’S MANUAL

If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.

About Copyright

return stop sheet

The unauthorized recording, use, distribution, or revision
of television programs, videotapes, DVDs and other
materials, is prohibited under the copyright laws of the
United States and other countries, and may subject you
to civil and/or criminal liability.
y

Note to CATV system installer
This reminder is provided to call the cable TV system
installer’s attention to Article 820-40 of the National
Electrical Code, which provides guidelines for proper
grounding - in particular, specifying that the cable
ground shall be connected to the grounding system of
the building, as close to the point of cable entry as
possible.

4

EN

E7PEAUD_DR430KU_EN.indd 4

2009/12/14 18:31:43

Maintenance
Servicing
g

If the remote control does not work properly, you can test if
the remote control sends out the infrared signal with a
digital camera (including built-in camera of cellular phone). It
will help to define the cause of malfunction.
With a digital camera (including built-in camera of
cellular phone):
Direct a digital camera to remote control, press
and hold a button on remote control. If infrared
light appears through digital camera, the remote
control is working.

Basic Setup

Cleaning
g the Cabinet

Cleaning
g Discs

Cleaning
g the Disc Lens

Disc Handling
g

Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending.
DTS and the Symbol are registered
trademarks and DTS Digital Out and the
DTS logos are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and HighDefinition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and
other countries.

Editing

• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.

“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable DVD
discs. The technology, when utilized instead of PCM
recording, also saves recordable disc space, allowing for
higher video resolution or extended recording time on
each DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.

Playback

• If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this owner’s manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.

Dolby Digital Recording

Recording

• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.

Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.

Disc
Management

• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near the
unit. Such chemicals may discolor the surface or
damage the unit.

Connections

• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 93-96 before returning the product.
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you.

IR Signal Check

Introduction

PRECAUTIONS

Function Setup

MPEG Layer - 3 audio coding technology licensed from
Fraunhofer IIS and Thomson.

Others

EN
E7PEAUD_DR430KU_EN.indd 5

5

2009/12/14 18:31:45

CONTENTS

Introduction

Recording

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .8
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the Batteries in the Remote Control . . . . . . 12
Using a Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 14
On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . 14
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FRONT PANEL DISPLAY GUIDE . . . . . . . . . . . . . . . . . . . 17

INFORMATION ON DVD RECORDING . . . . . . . . . . . . .
Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restrictions on Recording . . . . . . . . . . . . . . . . . . . . . . . . .
SETTINGS FOR A RECORDING . . . . . . . . . . . . . . . . . . . .
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . .
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording Audio Select (XP) . . . . . . . . . . . . . . . . . . . . . . .
Setting Aspect Ratio for Video Mode Recording . . . .
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . .
TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . .
SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . .
Connection to an External Device. . . . . . . . . . . . . . . . . .
Recording from an External Device . . . . . . . . . . . . . . . .
DV DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to DV and On-Screen Display . . . . . . . . . . . . . . .
DVC to DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connections
CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to an External Tuner . . . . . . . . . . . . . . . . . .
TV Connection Overview . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV with an HDMI
Compatible Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV with Component Video
Input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV with an S-Video Input Jack . . . . .
Connecting to a TV with Audio / Video Input Jacks .
Connecting to a TV without Audio
Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . .

18
18
18
19
20
20
21

33
33
33
34
34
34
35
35
36
38
41
42
43
43
44
45
45
46

21
22

Basic Setup
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETTING THE CLOCK
K ............................
Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . .

24
25
25
26

Disc Management
FORMATTING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choosing the Recording Format of a Brand-New
DVD-RW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reformatting a Disc Manually . . . . . . . . . . . . . . . . . . . . .
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . .
PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . .
Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

27
27
28
29
30
30
31

EN

E7PEAUD_DR430KU_EN.indd 6

2009/12/14 18:31:47

Editing
48
48
49
49
50

Function Setup
81
83
83
87
89
90
92

Playback

LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . .
GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Recording

Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . 96
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Editing
Function Setup

61
61
61
62
62
63
63
63
64
64
64
65

66
66
66
67
69
69
70
71
71
73
74
75
77
78
79
80

Disc
Management

51
52
53
53
54
54
54
54
55
55
55
56
56
57
58
59
59
59
60

INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . .
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DELETING TITLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CREATING/DELETING PLAYLIST . . . . . . . . . . . . . . . . . .
Adding Titles to a Playlist. . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing All Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Part of a Title . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Combining Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting or Releasing the Title Protection . . . . . . . . . . .
Setting or Clearing All Chapter Marks at Once. . . . . .

Basic Setup

INFORMATION ON PLAYBACK
K ...................
Structure of Disc Contents. . . . . . . . . . . . . . . . . . . . . . . . .
BASIC PLAYBACK
K ...............................
Direct Playbackk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . .
Playing Back an Audio CD and a CD-RW/-R with
MP3/JPEG files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Back a USB Device with MP3 / JPEG files . . .
Using the Title/Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . .
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIAL PLAYBACK
K.............................
Resume Playbackk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fast Forward / Fast Reverse Playbackk . . . . . . . . . . . . . .
Skipping TV Commercials During Playback. . . . . . . . .
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . .
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chasing Playback during Recording . . . . . . . . . . . . . . .
Simultaneous Playback and Recording. . . . . . . . . . . . .
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Title/Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPEAT/RANDOM/PROGRAM PLAYBACK/
SLIDE SHOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat Playbackk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Random Playbackk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SELECTING THE FORMAT OF AUDIO AND VIDEO . .
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching Audio Soundtrackk . . . . . . . . . . . . . . . . . . . . . .
Switching Virtual Surround System . . . . . . . . . . . . . . . .
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Black Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connections

Playback

Introduction

CONTENTS

Others

EN
E7PEAUD_DR430KU_EN.indd 7

7

2009/12/14 18:31:47

FEATURES
This unit not only plays back DVD and CD, but also offers features for you to record on DVD and edit them after that. The
following features are offered with this unit.

Recording
This unit is compatible with recording on DVD-RW/+RW
which is recordable repeatedly and DVD-R/+R which accept
the additional recordings until the disc becomes full but
not overwritable. You can choose either one for your
convenience.
Up to 12 program recording:
You can program the unit to record up to 12 programs,
within a month in advance. Daily or weekly program
recordings are also available.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time
[REC I] is pressed during recording, the recording time will
be increased by 30 minutes up to 8 hours. The recording
automatically stops when the recording time you set is
reached.
DV dubbing:
This function helps you to easily dub the contents of the DVC
(digital video camcorder) to DVD.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically (the input
from the L2 jacks only).
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title menu making:
The unit creates title menu automatically when finalizing discs.
Automatic playlist making:
The unit creates a playlist automatically after recording VR
mode DVD-RW.
Automatic title finalizing:
For video mode DVD-RW/-R and DVD+R recording, you can
finalize discs automatically after finishing all timer recordings
or at the end of the disc space if you set this in the main menu.

Playback
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you can experience the
theater surround sound from discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter/track or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Playing back MP3/JPEG files:
You can enjoy MP3/JPEG files which are recorded on
CD-RW/-R or a USB device.

Compatibility
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+RW/+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance.

Others
Progressive scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.

Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.

Symbol Description
For Recording, Playing Back, and Editing

Description refers to DVD-RW in video mode
Description refers to DVD-RW in VR mode
Description refers to DVD-R in video mode
Description refers to DVD+RW
Description refers to DVD+R
For Playback only

Description refers to DVD-video
Description refers to audio CD
Description refers to CD-RW/-R and USB device with MP3 files
Description refers to CD-RW/-R and USB device with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.

Editing
Deleting titles:
You can delete titles which you do not need anymore.
Setting or clearing chapter marks:
You can set or clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Deleting parts of titles:
You can delete a specific part of a title.
Dividing or combining titles:
You can divide or combine a title.
Editing title names:
You can change the title name you prefer.

8

EN

E7PEAUD_DR430KU_EN.indd 8

2009/12/14 18:31:47

Introduction

FEATURES
Discs for Recording, Playing back
Disc type

DVD-RW

DVD-R

DVD+RW

DVD+R

Format

Can be formatted in VR or video
mode
Video Mode

Automatically
formatted in
video mode

Automatically
formatted in
+VR mode

Automatically
formatted in
+VR mode

480 min (12cm)
144 min (8cm)

480 min (12cm)
144 min (8cm)

480 min (12cm)
144 min (8cm)

1X-16X
Ver.2.0/ 2.1

1X-4X

1X-16X

Playable on
DVD+RW
compatible
players.
Finalization
recommended.
(title menu will
be created)

Playable on
most DVD
players.
Finalization
recommended.
(title menu will
be created)

Connections

Logo

VR Mode

Maximum record 480 min (12cm)
time 144 min (8cm)

480 min (12cm)
144 min (8cm)

Playable on
Playable only
most DVD
on VR mode
players.
compatible unit. Finalization
Finalization
necessary.
recommended. (title menu will
be created)

Recording

Playable on
most DVD
players.
Compatibility Finalization
necessary.
(title menu will
be created)

Disc
Management

1X-6X
Disc Speed
Ver.1.1/ 1.2
Versions
Ver.1.1/ 1.2 CPRM compatible

Basic Setup

Icon

Record TV
programs

✓

✓

Reuse by deleting
the current
contents

✓

✓

Record 16:9 size
pictures

✓

✓

Record copy-once
programs
✓

✓
✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

Playlist Original

Scene delete

✓

✓

✓

✓

✓

Divide a title

✓

Combine titles

✓

✓

Hide chapters
✓

✓

Create a
playlist

✓

Protect a title

✓

✓

✓

✓

✓

✓

Others

✓

Function Setup

✓

✓

Create chapters
wherever you like
(chapter mark)

Delete a title

✓

✓*

Editing Features

Edit title name

✓

Editing

Create chapters
at fixed intervals
(auto chapter)

✓

Playback

Available Features

Recording Features

✓: Available
Gray: Not available
*CPRM compatible disc only.

EN
E7PEAUD_DR430KU_EN.indd 9

9

2009/12/14 18:31:48

FEATURES
Discs for playing back
DVD-VIDEO

Disc Type

CD-DA

CD-RW

CD-R

Logo
Icon
Files for playing back
Type of title

MP3

JPEG

CD-RW/-R
USB device

CD-RW/-R
USB device

Icon
Media

is a trademark of DVD Format/Logo Licensing Corporation.

* This unit cannot play back the disc contents protected
by Windows Media Digital Rights Management (DRM).

Unplayable Discs
• CD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD) • DVD-ROM
• DVD-audio
• Unfinalized disc
• DVD-RW/-R recorded in non compatible recording format
• Blu-ray Disc
• HD DVD
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.

Color Systems
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.

Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.

10

Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition, the unit
may not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• Toshiba is not liable for any damage or loss caused directly
or indirectly by the malfunction of this recorder, including,
without limitation, any one of the following:
• Failure to record contents intended to be recorded by
the consumer.
• Failure to edit contents as intended by the consumer.
• When a DVD-RW/-R, DVD+RW/+R disc created on this
recorder is used (e.g., insertion, playback, recording or
editing) in another DVD player, recorder or personal
computer drive.
• When a DVD-RW/-R, DVD+RW/+R disc that is used in
the manner described in the immediately preceding
bullet point is used again in this recorder.
• When a DVD-RW/-R, DVD+RW/+R disc that was
recorded in another DVD recorder, or in a personal
computer drive is used in this recorder.
• Some functions may not work with personal computer
discs.
• Discs recorded in this recorder may not operate as
expected on other DVD players, recorders or personal
computer drives.
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that this unit
will successfully play every disc bearing the DVD and CD
logos. If you happen to experience any difficulty playing a
DVD and/or CD disc on this unit, please contact Toshiba
Customer Service.
DVD players with
recorded in VR mode.

are capable of playing DVD-RW

EN

E7PEAUD_DR430KU_EN.indd 10

2009/12/14 18:31:51

Introduction

FUNCTIONAL OVERVIEW
Front Panel
2

1

3* 4

5

6

7

8

14 13

Connections

15

12

Disc
Management
Recording

8. SKIP G button
• During playback, press to skip to the next chapter or track.
• During playback, press and hold for 1.5 seconds to fast
forward.
• When playback is paused, press to play back advance step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow forward.
9. C STOP button
• Press to stop playback or recording.
10. B PLAY button*
• Press to start or resume playback.
11. I REC button
• Press once to start a recording. Press repeatedly to start
one-touch timer recording.
12. DV IN jack (L3)
• Use to connect the DV output of external device with a DV
cable.
13. AUDIO input jacks (L2)
• Use to connect external device with an RCA audio cable.
14. VIDEO input jack (L2)
• Use to connect external device with an RCA video cable.
15. USB input jack
• You can plug your USB device here, and play back the
contents in it.

Basic Setup
Playback

(*) The unit can also be turned on by pressing these buttons.
1. I/y
y ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit, you
must unplug the AC power cord.)
• If timer programmings have been set, press to turn the unit
into the timer-standby mode.
2. Disc tray
• Place a disc when the disc tray is opened.
3. A OPEN/CLOSE button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you can
control the unit from a distance.
5. Display
• Refer to “FRONT PANEL DISPLAY GUIDE” on page 17.
6. HDMI indicator
• Lights up and indicates the HDMI video resolution when
HDMI output is on.
7. SKIP H button
• During playback, press once midway through a chapter or
track to go back to the beginning of the current chapter
or track. When pressed twice in quick succession, playback
will start from the preceding chapter or track.
• During playback, press and hold for 1.5 seconds to fast
reverse.
• When playback is paused, press to play back reverse step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow reverse.

9 10* 11

Rear Panel
1

2

3

4

5

Editing

VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

10 9 8

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

7

6

Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.

EN
E7PEAUD_DR430KU_EN.indd 11

Others

7. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
8. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
9. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device with
an S-video cable.
10.AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio cable.

Function Setup

1. VIDEO IN jack (L1)
• Use to connect external device with an RCA video cable.
2. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video inputs
with a component video cable.
4. HDMI OUT jack
• Use an HDMI cable to connect to a display with an HDMI
compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely shut
down the unit.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decoder, DTS
decoder or other device with a digital audio coaxial input
jack with a digital audio coaxial cable.

11

2009/12/14 18:31:54

FUNCTIONAL OVERVIEW
Remote Control

Installing the Batteries in the Remote
Control
Install 2 AA (1.5 V) batteries matching the polarity
indicated inside battery compartment of the remote
control.

1

Open the cover.

2

Insert batteries.

Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
approx. 23 feet (7m) within 30°

30˚
23feet (7m)

Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.

3

30˚

23feet (7m)

23feet (7m)

15

1

Close the cover.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

16

2*

3

SATELLITE
LINK

17
TIMER
PROG.

SPACE

18
SETUP

DISPLAY

AUDIO

19

4

TOP MENU

MENU/LIST

5

Caution:

6

Never throw batteries into a fire.
• Be sure to use AA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace
batteries with new ones.
• When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.

12

ENTER
CLEAR

Note:

22
RETURN

7

23
SKIP

9
11*

FWD

REV

SKIP

8

24
PAUSE

STOP

PLAY

10

25

26
TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

12

27
REPEAT REC MODE

14

20

21

REC

13

ZOOM

29

28
30

SE-R0265

EN

E7PEAUD_DR430KU_EN.indd 12

2009/12/14 18:31:56

*) The unit can also be turned on by pressing these buttons.

Disc
Management
Recording
Playback
Editing
Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 13

Basic Setup

16. I/y
y ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord).
• If timer programmings have been set, press to turn
the unit into the timer-standby mode.
17. SATELLITE LINK button
• Press to turn the unit into the satellite link standby
mode.
• In the satellite link standby mode, press to cancel the
mode and to turn the unit on.
18. TIMER PROG. button
• Press to display the timer programming list.
19. AUDIO
button
• Press to display the audio menu during playback.
20. DISPLAY button
• Press to display the display menu on or off.
21. MENU/LIST button
• Press to display the disc menu. To change original
and playlist on the TV screen.
22. ENTER button
• Press to confirm or select menu items.
23. RETURN button
• Press to return to the previous displayed menu
screen.
24. SKIP G button
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to
forward the playback step by step.
25. FWD D button
• During playback, press to fast forward playback.
• When playback is in pause, press to slow forward
playback.
26. STOP C button
• Press to stop playback or recording.
• Press to exit from the title list.
27. INSTANT SKIP button
• During playback, press to skip 30 seconds.
28. 1.3x/0.8x PLAY button
• During playback, press to play back in a slightly
faster/slower speed while keeping the sound output.
29. ZOOM button
• During playback, press to enlarge the picture on the
TV screen.
30. REC I button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.

Connections

1. INPUT SELECT button
• Press to select the appropriate input.
2. OPEN/CLOSE A button*
• Press to open or close the disc tray.
3. Number/Character buttons
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main
menu.
• Press to enter title names.
4. SETUP button
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode. (Though
appears, the
output mode switches to the interlace and
“
” will be displayed on the front panel
display briefly.)
5. TOP MENU button
• Press to display the title list.
6. Cursor K / L/ { / B buttons
• Press to select items or settings.
7. CLEAR button
• Press to clear the password once entered, to cancel
the programming for CD, to clear the selecting
marker number in the display menu, etc.
8. SKIP H button
• During playback, press to return to the beginning of
the current chapter, track or file.
• During playback, press twice in quick succession to
skip to the previous chapter or track.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
9. REV E button
• During playback, press to fast reverse playback.
• When playback is in pause, press to slow reverse
playback.
10. PAUSE F button
• Press to pause playback or recording.
11. PLAY B button*
• Press to start playback or resume playback.
12. TIME SLIP button
• Press once to start recording the TV program you
are watching. Press again to watch the content
being recorded from the beginning while recording
continues. (VR mode DVD-RW with the recording
mode of LP, EP or SLP only)
13. REPEAT button
• Press to display the repeat menu.
14. REC MODE button
• Press to switch the recording mode.
15. HDMI button
• Press to set the HDMI video resolution.

Introduction

FUNCTIONAL OVERVIEW

13

2009/12/14 18:31:57

GUIDE TO ON-SCREEN DISPLAYS AND MENUS
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.

On-Screen Display / Menu
The on-screen display changes in the following order
as you press [DISPLAY].

Disc Information / Menu

5

OFF

1/ 5

2
1/ 5

0:01:00 / 1:23:45
-RW

Disc Information/Menu
Title Name Information
(only when DVD+RW/+R, VR mode DVD-RW/-R, or
unfinalized Video mode DVD-RW/-R is in playback)
or
File Name Information
(only when a CD with MP3/
JPEG files is in playback)
MP3 Tag Information
(only when a MP3 file is in playback)
HDMI Information
(only for the images output through the HDMI output)

VR

ORG

L1 (Rear)

6

1

7

3
SP

1:53

4

* This is an example screen only for explanation.
1. Indicates a disc type and format mode.
2. Indicates a type of titles for VR mode DVD-RW .
3. Indicates a selected external input mode.
4. Indicates a recording mode and possible recording
time left.
5. Indicates a title number / total number of titles, chapter
number / total number of chapters, elapsed time and
total time of disc playback.
6. Each icon means:

: Search

: Marker

: Audio

: Noise Reduction / Black Level

: Subtitle

: Zoom

: Angle

: Surround

: Repeat
7. Indicates an operation status.

Note
• In some descriptions on this manual, only one disc
type is indicated as an example.

Title/File Name Information
Title name information
Title Name
My Title

File name information
File Name
My File

14

EN

E7PEAUD_DR430KU_EN.indd 14

2009/12/14 18:31:59

MP3 Tag Information

Introduction

GUIDE TO ON-SCREEN DISPLAYS AND MENUS
HDMI Information

• First, track name will be displayed.

1

2

Track Name

• If you press [DISPLAY] one more time, artist name will
be displayed.

480p
/
Bitstream

YCbCr

Connections

Video Info. :
Audio Info. :

3

Artist Name

Album Name

Basic Setup

• If you press [DISPLAY] one more time, album name
will be displayed.

*1. Indicates the resolution of the HDMI output image.
*2. Indicates the HDMI video format.
*3. Indicates the HDMI audio format.
* “- - -” will be displayed, when it does not have any
information.

Disc
Management

• If there is no artist, track or album name, “Not Available”
will be displayed.

Main Menu

Setup
General Setting
Timer Programming
Title List
DVD Menu
DISC Playback Mode
USB Playback Mode

Function Setup

General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All

E7PEAUD_DR430KU_EN.indd 15

Others

1. Playback:
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. HDMI:
To set up the HDMI connection setting.
7. Reset All:
To reset the setting to the factory default.

EN

Editing

General Setting Menu
1
2
3
4
5
6
2
7
3

Playback

1
2
3
4
5
6

1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. DVD Menu:
To set up the DVD setting.
5. DISC Playback Mode:
To set up the disc playback setting.
• “DISC Playback Mode” is available only when an audio
CD, a CD-RW/-R with MP3 / JPEG files is inserted into
the unit.
6. USB Playback Mode:
To set up the USB playback setting.
• “USB Playback Mode” is available only when a USB
device is connected.

Recording

Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [ENTER] to display the
menu. These menus provide entries to all main functions
of the unit.

15

2009/12/14 18:32:00

GUIDE TO ON-SCREEN DISPLAYS AND MENUS
DVD Menu / DISC Playback Mode

DVD Menu

1
2
3
4

Format
Finalize
Disc Protect OFF ON
Delete All Playlists


When an Audio CD is inserted:
DISC Playback Mode

5
1
6
2

Random Play
Program Play

When a JPEG / MP3 disc is inserted:

1. Format (DVD-RW, DVD+RW only):
Allows you to format the disc.
2. Finalize:
Allows you to finalize a disc containing recorded titles.
3. Disc Protect (VR mode DVD-RW, DVD+RW/+R only):
Allows you to protect a disc from accidental editing or
recording.
4. Delete All Playlists (VR mode DVD-RW only):
Allows you to delete playlist.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.
7. Music:
Allows you to make settings for MP3 playback.
8. Photo:
Allows you to make settings for JPEG playback.
9. Slide Show: (JPEG files only)
Allows you to select the display time of the slide show
mode.

DISC Playback Mode

3
7
8
3

Music
Photo
Random Play
Slide Show

3
5
9
3

USB Playback Mode
USB Playback Mode

1
2

Music
Photo

3
4

16

Random Play
Slide Show

1. Music:
Allows you to make settings for MP3 playback.
2. Photo:
Allows you to make settings for JPEG playback.
3. Random Play:
Allows you to activate the random playback feature.
4. Slide Show: (JPEG files only)
Allows you to select the display time of the slide show
mode.

EN

E7PEAUD_DR430KU_EN.indd 16

2009/12/14 18:32:02

Introduction

FRONT PANEL DISPLAY GUIDE
2
1

PM

BS CS

DR

CD

3

Connections

HDD

4
1.
: Appears in the afternoon with the clock display.

2. Title / track and chapter mark
: Appears when indicating a title / track number.
: Appears when indicating a chapter number.

• Elapsed playback time
• Current title / chapter / track / file number
• Recording time / remaining time
• Clock
• Selected external input position
• Remaining time for one-touch timer recording
• Selected HDMI video resolution

Disc
Management

3. Current status of the unit

Basic Setup

PM

4. Displays the following

: Appears when playback is paused.
: Appears when playing back a disc.

Recording

: Appears when the timer programming or OTR
has been set and is proceeding.
: Flashes when all timer recordings have been
finished.
: Appears during recording process.
: Flashes when a recording pauses.
: Appears when a disc is in this unit.

Playback

Display Message
Appears when HDMI video
resolution (480p) is selected.

Appears when the disc tray is
closing.

Appears when HDMI video
resolution (720p) is selected.

Appears when a disc is loaded
on the disc tray.

Appears when HDMI video
resolution (1080i) is selected.

Appears when data is being
recorded on a disc.

Appears when HDMI video
resolution (1080p) is selected.

Editing

Appears when the disc tray is
opening.

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 17

17

2009/12/14 18:32:03

CONNECTIONS
Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures
may be distorted due to the copy protection system.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

Connecting to an External Tuner
RCA video cable
RCA audio cable

RCA video
cable

VIDEO VIDEO
IN
OUT

VIDEO IN
R

L

external tuner

R

AUDIO IN
(L1)

VIDEO OUT

AUDIO IN

L

RCA audio
cable
R

L

AUDIO OUT

L

R

IN

S-VIDEO AUDIO OUT

ANT.OUT ANT. IN

rear of this unit

satellite
dish

ANT. IN

RF coaxial cable

VIDEO VIDEO
OUT
IN

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

or

cable TV
company

After making the connection as described above, make sure to select the appropriate input type by following the
steps on page 26.

Note
• Required cables and connecting methods differ depending on the external tuner.
For more information, please contact your external tuner provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external
tuner is turned on.
• You cannot record one channel while watching another channel.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.

TV Connection Overview
If Your TV has

Higher
Quality

HDMI IN

COMPONENT VIDEO IN

S-VIDEO IN

Standard
Quality

18

R

L

AUDIO IN VIDEO IN

Refer to

page
19
page
20

If your device has
only an ANT. IN jack

ANT. IN

page
21

page
20
page
21

EN

E7PEAUD_DR430KU_EN.indd 18

2009/12/14 18:32:08

HDMI cable

Introduction

CONNECTIONS

HDMI IN

Connections

HDMI OUT

rear of this unit
VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

Basic Setup

Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.

Disc
Management

No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.

HDMI Video Resolution and Actual Output Signals
Recording

Press [HDMI] to select the HDMI video resolution. The video resolution changes as follows every time [HDMI] is
pressed.

Front Panel Display

Video Output Signal
480 Progressive

Press [HDMI]
Playback

720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive

Editing

Press [HDMI]
• The HDMI mode that is not supported by display device will be skipped.

Function Setup

Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital
content protection system). HDCP is copy protection technology that comprises data encryption and authentication
of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device
(or AV amplifier) for more information.

Note for HDMI Connection

EN
E7PEAUD_DR430KU_EN.indd 19

Others

• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate
properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit
can be controlled by another device via the HDMI connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI
converter cable, the signals are output in digital RGB.
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.
Please check and set the HDMI setting again.

19

2009/12/14 18:32:10

CONNECTIONS
Connecting to a TV with Component Video Input jacks
COMPONENT
VIDEO IN

(Green)
(Green)

Y

Y

(Blue)

RCA component
video cable

(Blue)

PB
/CB

PB/CB

(Red)
(Red)

PR
/CR

PR/CR

COMPONENT
VIDEO OUT

VIDEO IN

VIDEO
OUT

AUDIO IN

L

L

RCA audio
cable

R

R
AUDIO OUT

rear of this unit
VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

R

IN

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.

Connecting to a TV with an S-Video Input Jack

VIDEO IN

AUDIO IN
VIDEO
OUT

L

RCA audio cable

L

R

S-VIDEO IN

S-video cable

R
AUDIO OUT

OUT
S-VIDEO

rear of this unit
VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.

20

EN

E7PEAUD_DR430KU_EN.indd 20

2009/12/14 18:32:12

Introduction

CONNECTIONS
Connecting to a TV with Audio / Video Input Jacks
VIDEO IN

RCA video cable

Connections

VIDEO
OUT

AUDIO IN

L

L

RCA audio cable

R

R
AUDIO OUT

Basic Setup

rear of this unit
VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

Disc
Management

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.

Connecting to a TV without Audio / Video Input Jacks

Recording

ANT. IN

Set channel 3 or 4

rear of this unit

VHF / UHF
antenna

VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

external tuner

or

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

VIDEO VIDEO
IN
OUT

RCA video cable

L

cable TV
company
RCA audio cable

L

AUDIO OUT

L

VIDEO OUT

R
AUDIO IN
(L1)

Editing

R
ANT.OUT ANT. IN

Playback

R
AUDIO IN
(L1)

R

IN

S-VIDEO AUDIO OUT

RCA audio cable
RF coaxial cable

Function Setup

RCA video cable

RF coaxial cable
R

ANT. IN

L

AUDIO IN

VIDEO IN

3
4
CHANNEL

TO TV

RF coaxial cable

RF modulator

Set channel 3 or 4

Others

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.

Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.

EN
E7PEAUD_DR430KU_EN.indd 21

21

2009/12/14 18:32:13

CONNECTIONS
Digital Audio Connection
Coaxial Cable Connection
Dolby Digital decoder

rear of this unit

COAXIAL

digital audio
coaxial cable

VIDEO VIDEO
IN
OUT

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

COAXIAL

R

IN

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

digital audio
coaxial input jack

HDMI Audio Connection
AV receiver / amplifier with an HDMI input jack
rear of this unit
VIDEO VIDEO
IN
OUT

L

L

HDMI IN

Y

HDMI OUT
PB/CB

HDMI cable

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

HDMI OUT

To set up “HDMI Audio”, refer to pages 82 and 90-91.
No supplied cables are used in these connections:
Please purchase the necessary cables at your local store.

Multi Channel Digital Audio Setting

To set up “Dolby Digital”, refer to pages 81 and 83-85.
Setting in the Setup Menu
Audio Format (disc)

Dolby Digital
DTS®
LPCM

22

Actual Audio Output

Dolby Digital Setting
of this unit (refer to
page 85)

DTS Setting of
this unit
(refer to page 85)

Stream

—

Dolby Digital

Dolby Digital

PCM

—

2 channel PCM

2 channel PCM

—

ON

DTS®

DTS®

HDMI OUT

DIGITAL AUDIO
OUTPUT

—

OFF

No output

No output

Stream

ON

2 channel PCM

2 channel PCM

PCM

OFF

2 channel PCM

2 channel PCM

EN

E7PEAUD_DR430KU_EN.indd 22

2009/12/14 18:32:14

Note

Disc
Management

VIDEO
OUT

analog audio
input jacks

L

rear of this unit

VIDEO VIDEO
IN
OUT

AUDIO IN
R

Basic Setup

2 Channel Analog Audio Connection
stereo system

Connections

• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by
an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround
sound as heard in the movie theaters.
• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
• For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting (Refer to page 85).
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit
length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output connector.
• If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.

Introduction

CONNECTIONS

L

L

L

Y

HDMI OUT
PB/CB

R
AUDIO IN
(L1)

IN

R

S-VIDEO AUDIO OUT

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

Recording

R

RCA audio cable

AUDIO OUT

AUDIO OUT

Playback

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1

Editing
Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 23

23

2009/12/14 18:32:16

INITIAL SETTING
When you turn on this unit for the first time, you need to follow these steps after you have completed all the
connections.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

TOP MENU

1
2
3

AUDIO

MENU/LIST

ENTER
CLEAR

After you have made all the
necessary connections, press
[I/y
y ON/STANDBY] to turn on the
unit.
Turn on your TV.

Press the button on the TV’s remote
control that accesses the external
input channel. It may be labeled
“SOURCE”, “AV” or “SELECT” (refer to
your TV’s user manual). Or press “2”
on the TV’s remote control, then
press channel down button
repeatedly until you see the “Initial
Setting” menu.

RETURN

Initial Setting

SKIP

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

OSD Language
English
Français
Español

Select the language for Setup display.
REPEAT REC MODE

REC

SE-R0265

ZOOM

4
5

Use [K / L] to select your desired
language, then press [ENTER] to set
language.
Press [ENTER] to activate “Clock
Setting”.
Initial Setting

Clock Setting
--- / -- / ---- (---)
-- : -- --

ENTER: Set Clock.
RETURN: Exit Initial Setting.

6
24

Proceed to step 4 in “Clock Setting”
on page 25.

EN

E7PEAUD_DR430KU_EN.indd 24

2009/12/14 18:32:16

Introduction

SETTING THE CLOCK
Set the clock before you try the timer programming.

Clock Setting

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

CLEAR

FWD

REV

Use [K / L] to select calendar or time,
then press [ENTER].
Clock Setting

4

SKIP

Use [{
{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[ENTER].
Clock Setting

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

JAN / 01 / 2010 ( FRI )
12 : 00 AM

REC

Your setting will be activated.
The clock start counting when you press
[ENTER].

ZOOM

SE-R0265

5

Playback

REPEAT REC MODE

Recording

SKIP

RETURN

“Clock” menu will appear.

JAN / 01 / 2010 ( FRI )
12 : 00 AM

MENU/LIST

ENTER

Use [K / L] to select “Clock”, then
press [ENTER].

Disc
Management

TOP MENU

AUDIO

1
2
3

Basic Setup

INPUT
SELECT

Connections

OPEN/
CLOSE

Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].

Press [SETUP] to exit.

Editing
Function Setup
Others

Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds.
• For setting the day, year, hour and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2009
up to 2059.

EN
E7PEAUD_DR430KU_EN.indd 25

25

2009/12/14 18:32:18

SETTINGS FOR THE VIDEO INPUT
You must let the unit know which video input jack you are using before making a recording.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

TOP MENU

AUDIO

MENU/LIST

ENTER
CLEAR

SKIP

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

1
2
3
4
5
6

ZOOM

Press [SETUP].

Use [K / L] to select “General
Setting”, then press [ENTER].
Use [K / L] to select “Video”, then
press [ENTER].
Use [K / L] to select “Select Video”,
then press [ENTER].
Use [K / L] to select the desired
external input position, then press
[ENTER].
Use [K / L] to select the input jack
type to connect, then press [ENTER].
If you want to use VIDEO IN jack, select “Video
In”, then press [ENTER].
If you want to use S-VIDEO IN jack, select
“S-Video In”, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All

Progressive
TV Aspect
Select Video
- L1(Rear)
Select
Video
Video In
S-Video In

SE-R0265

7

26

Press [SETUP] to exit.

EN

E7PEAUD_DR430KU_EN.indd 26

2009/12/14 18:32:20

Introduction

FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

TUV

SATELLITE
LINK
WXYZ

PQRS

Use [K / L] to select “DVD Menu”,
then press [ENTER].
Setup
General Setting

Disc
Management

INPUT
SELECT

Basic Setup

1
2

OPEN/
CLOSE

Press [SETUP].

Timer Programming
Title List

TIMER
PROG.

SPACE

SETUP

DISPLAY

TOP MENU

AUDIO

MENU/LIST

DVD Menu

3

Use [K / L] to select “Format”, then
press [ENTER].

4

Use [K / L] to select “Format Mode”,
then press [ENTER].

DVD Menu

SKIP

TIME SLIP

FWD

REV

STOP

PLAY

1.3x / 0.8x PLAY

REPEAT REC MODE

SKIP

REC

DVD Menu
Format
Finalize

INSTANT SKIP

Playback

PAUSE

RETURN

Start
Format Mode

ZOOM

Insert a brand-new disc.
Formatting will start.

Formatting

90%

Formatting is completed.

Others

• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R and DVD+RW/+R.
• You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the “Setup” menu only. To reformat a disc
(change disc format type), refer to “Reformatting a
Disc Manually” on page 28.

Press [SETUP] to exit.

Function Setup

Note

5
6
7
8

Use [K / L] to select “Video mode” or
“VR mode”, then press [ENTER].
Editing

SE-R0265

“100%” is indicated.

EN
E7PEAUD_DR430KU_EN.indd 27

Recording

Format
Finalize

ENTER
CLEAR

Connections

When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW once it has been used.

27

2009/12/14 18:32:21

FORMATTING A DISC
Reformatting a Disc Manually
If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.

Insert a recordable disc.
OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

TIMER
PROG.

SPACE

1
2

Press [SETUP].

Use [K / L] to select “DVD Menu”,
then press [ENTER].
Setup
General Setting
Timer Programming
Title List

SETUP

DISPLAY

TOP MENU

AUDIO

MENU/LIST

ENTER
CLEAR

SKIP

DVD Menu

3

RETURN

FWD

REV

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

ZOOM

e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists

SKIP

PAUSE

Use [K / L] to select “Format”, then
press [ENTER].

4

Use [K / L] to select “Start”, then
press [ENTER].
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists

Start
Format Mode

Selection menu will appear and prompt you to
confirm.
• For DVD+RW, use [K / L] to select “Yes”, then
press [ENTER].

SE-R0265

5

Use [K / L] to select “Yes”, then press
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
Are you sure?
Yes
No

Note
• When you reformat the disc, the contents of the disc
are erased.
• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 27.)
• This unit may not be able to reformat a disc that is
not previously formatted by this unit e.g. DVD disc
formatted by PC or another recorder.

28

6

Formatting is completed.
“100%” is indicated.

Formatting

100%

EN

E7PEAUD_DR430KU_EN.indd 28

2009/12/14 18:32:22

To prevent accidental recording, editing or erasing the
titles, you can protect them from “DVD Menu” menu.

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TOP MENU

e.g.) VR mode DVD-RW
Format
Finalize
Disc Protect OFF ON
Delete All Playlists

AUDIO

Disc
Management

DISPLAY

Use [K / L] to select “Disc Protect
OFF ON”, then press [ENTER].
DVD Menu

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

Use [K / L] to select “DVD Menu”,
then press [ENTER].

Basic Setup

INPUT
SELECT

Press [SETUP].

Connections

OPEN/
CLOSE

1
2
3

Introduction

SETTING A DISC TO PROTECT

MENU/LIST

ENTER
CLEAR

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REC

ZOOM

Protect this disc?
Yes
No

A disc will be protected.

Playback

REPEAT REC MODE

4

Use [K / L] to select “Yes”, then press
[ENTER].

Recording

SKIP

RETURN

This operation may take
awhile to be completed.

SE-R0265

Editing
Function Setup

Note

Others

To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON”.
DVD Menu
Format
Finalize
Disc Protect ON
OFF
Delete All Playlists

To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.

EN
E7PEAUD_DR430KU_EN.indd 29

29

2009/12/14 18:32:24

PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing

You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
timer recordings and at the end of the disc space.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

TOP MENU

AUDIO

1
2
3
4

Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
“General Setting” menu will appear.

Use [K / L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.

Use [K / L] to select “Auto Finalize”,
then press [ENTER].
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press
[ENTER].
Auto Finalize

MENU/LIST

Disc Full
End of Timer Rec
ENTER
CLEAR

SKIP

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

5

Use [K / L] to select “ON”, then press
[ENTER].
Disc Full
ON
OFF
End of Timer Rec

REPEAT REC MODE

REC

ZOOM

SE-R0265

ON
OFF

6

Press [SETUP] to exit.

Note
• This function is not available after finishing daily or
weekly program recording.

30

EN

E7PEAUD_DR430KU_EN.indd 30

2009/12/14 18:32:25

Introduction

PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Use [K / L] to select “Finalize”, then
press [ENTER].
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW
Finalize disc?

SATELLITE
LINK

Yes
No

TIMER
PROG.

SPACE

DISPLAY

TOP MENU

Finalizing will start.

AUDIO

Recording

SETUP

“DVD Menu“ menu will appear.

Disc
Management

INPUT
SELECT

Use [K / L] to select “DVD Menu”,
then press [ENTER].

Basic Setup

OPEN/
CLOSE

1
2
3
4

Press [SETUP].
Connections

You will need to finalize discs to play back on other DVD
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of
the disc, a shorter recording period on the disc will
require a longer time period for finalization. Do not
unplug the power cord during finalization.

MENU/LIST

ENTER
CLEAR

RETURN

FWD

REV

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

ZOOM

This operation may take
awhile to be completed.

5

Finalizing is completed.

Editing

REC

90%

SKIP

PAUSE

REPEAT REC MODE

Playback

Finalizing
SKIP

Function Setup

SE-R0265

Others

EN
E7PEAUD_DR430KU_EN.indd 31

31

2009/12/14 18:32:27

PLAYING THE DISCS IN OTHER DVD PLAYERS
Note
• Finalizing a disc in video mode and +VR mode
automatically creates a title menu.
• After you finalize the DVD+RW, you can call up the
title list by pressing [TOP MENU], or you can call up
the title menu by pressing [MENU/LIST].
• Even after DVD+RW is finalized, you can still record
or edit. After you finalize DVD-RW/-R or DVD+R, you
cannot edit or record anything else on that disc.
• If you insert a DVD-RW finalized with this unit, “Undo
Finalization” will appear instead of “Finalize” at
step 3.
• To release the finalization of the DVD-RW disc, select
“Undo Finalization” at step 3.
DVD Menu
Format
Undo Finalization
Disc Protect OFF
Delete All Playlists

ON

To cancel finalizing...
(DVD-RW only)
Press [STOP C] during the finalizing is in progress. Use
[K / L] to select “Yes”, then press [ENTER]. Finalizing is
canceled and the unit switches to stop mode.

Do you want to cancel ?
Yes
No

Finalizing

5%

If “ ” appears when [STOP C] is pressed, you cannot
cancel finalizing because the finalizing has already
reached at a critical point in its process.
If “No” is selected and [ENTER] or [RETURN] is pressed,
finalizing is continued.
You cannot cancel finalizing a DVD-R, DVD+R and
DVD+RW once it has started.

• To undo the finalization of the DVD+RW, make an
additional recording onto the disc.
• DO NOT power off during finalizing. This may result
in a malfunction.
• For DVD+RW, if you have added or deleted chapters,
or made chapters hidden, you must finalize the disc
before being able to see those effects on other units.
To play back discs other than DVD+RW on other DVD
players, you will need to finalize.

32

EN

E7PEAUD_DR430KU_EN.indd 32

2009/12/14 18:32:28

Recording Mode

Restrictions on Recording

XP
SP
LP

12cm

8cm

Video/
Sound Quality

60 min 18 min
120 min 36 min
240 min 72 min
360 min 108 min
480 min 144 min

Note

Making discs playable in other DVD players (Finalize)
For DVD-RW/-R, it is necessary to finalize the disc after
recording, in order to play back the disc on other DVD
players. (Refer to pages 30-32.) For DVD+RW/+R, it is
recommended to finalize the disc in order to make the
disc more compatible to other DVD player. When video
and +VR mode disc are finalized, a title menu is created.
You cannot finalize discs in other DVD recorders.

Recording
Playback
Editing

• This unit cannot record to CD-RW or CD-R.
• DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Discs recorded in video mode on this unit cannot
record additional information using other DVD
recorders.
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.

Disc
Management

• The recording times listed above are estimates and are
for reference purposes only. Actual recording times may
vary.
• The audio and video quality of content being recorded
may differ depending on the recording mode/recording
time chosen.

What is “CPRM”?
CPRM is a copy protection system with scramble system
regarding the recording of “copy-once” broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This unit is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
make another copy of those recordings. CPRM recordings
can only be made on CPRM compatible DVD-RW formatted
in VR mode, and CPRM recordings can only be played back
on DVD players that are specifically compatible with CPRM.

Basic Setup

SLP

Recording time

You cannot record copy-protected program using this
unit. Copy-protected video signal is included in DVDvideos, some satellite broadcasts, some pay-per-view
stations and some “premium” stations.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
“Copy-once only” video can only be recorded to CPRM
compatible DVD-RW formatted in VR mode.

Connections

You can select a recording mode among 5 options, and
the recording time will depend on the recording mode
you select as follows.
Recording mode

Introduction

INFORMATION ON DVD RECORDING

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 33

33

2009/12/14 18:32:29

SETTINGS FOR A RECORDING
Make Recording Compatible

Use this feature to make the discs recorded on other unit
recordable on this unit. When you make an additional
recording on this unit with “Make Recording Compatible”
set to “ON”, the title list is automatically converted to our
style.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press
[ENTER].
“Recording” menu will appear.
3) Use [K / L] to select “Make Recording Compatible”,
then press [ENTER].

Setting for Auto Chapter

You can set a specified time for chapter marks.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
3) Use [K / L] to select “Auto Chapter”, then press
[ENTER].
4) Use [K / L] to select a desired time option, then
press [ENTER].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes

4) Use [K / L] to select “ON” or “OFF”, then press
[ENTER].
Make Recording Compatible
ON
OFF

ON:

Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
Prohibiting additional record to the disc that
has a title list created by other units.

OFF:

5) Press [SETUP] to exit.

Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
• A blank chapter may be created depending on the
remaining time of the disc.

5) Press [SETUP] to exit.

Note
• This function is also available for unfinalized DVD+R.

34

EN

E7PEAUD_DR430KU_EN.indd 34

2009/12/14 18:32:30

Recording Audio Select (XP)

1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].

3) Use [K / L] to select “Recording Audio Select (XP)”,
then press [ENTER].

You can set aspect ratio for video mode recording.
1) Follow step 1 to 2 on “Recording Audio Select(XP)”.
2) Use [K / L] to select “Aspect Ratio (Video mode)”,
then press [ENTER].
3) Use [K / L] to select your desired setting, then press
[ENTER].
Aspect Ratio (Video mode)

4) Use [K / L] to select “PCM” or “Dolby Digital”, then
press [ENTER].
Recording Audio Select (XP)
PCM
Dolby Digital

5) Press [SETUP] to exit.

• “PCM” stands for Pulse Code Modulation. It changes
analog sound to digital sound without compressing
audio data.
• When the recording mode is set at other than XP, the
unit records “Dolby Digital” audio automatically even
if you selected “PCM”.

4) Press [SETUP] to exit.

Note
• For DVD-RW VR mode, the image will be recorded in
whichever the ratio that the program you record are
broadcasted with, regardless of the “Aspect Ratio
(Video mode)” setting.
• For DVD+RW/+R, the image will always be recorded
in aspect ratio of 4:3.

Playback

Note

Recording

PCM:
Records PCM audio for the best quality sound.
Dolby Digital:
Records Dolby Digital audio for good quality sound.

Auto (default): It will be recorded with whichever the
ratio that the program you started to record are
broadcasted with.
4:3 : Recorded in the aspect ratio of 4:3.
16:9 : Recorded in the aspect ratio of 16:9.

Disc
Management

Auto
4:3
16 : 9

Basic Setup

2) Use [K / L] to select “Recording”, then press
[ENTER].
“Recording” menu will appear.

Setting Aspect Ratio for Video Mode
Recording

Connections

You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.

Introduction

SETTINGS FOR A RECORDING

Editing
Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 35

35

2009/12/14 18:32:31

BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

DISPLAY

TOP MENU

CLEAR

Align the disc to
the disc tray guide.

AUDIO

MENU/LIST

3

RETURN

FWD

REV

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REC

ZOOM

Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
• When inserting a brand-new DVD-RW or
DVD+RW, the unit automatically starts to
format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.

SKIP

PAUSE

REPEAT REC MODE

Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.

SATELLITE
LINK

ENTER

SKIP

Turn on the TV and be sure to select the input to
which the unit is connected.

TIMER
PROG.

SPACE

SETUP

1
2

Press [I/y
y ON/STANDBY].

4

Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 33.

SE-R0265

SP

5

36

1:53

Press [INPUT SELECT ] to select the
appropriate external input position
(L1/L2) to which your external tuner
is connected. Then select the desired
channel to record on the external
tuner.

EN

E7PEAUD_DR430KU_EN.indd 36

2009/12/14 18:32:32

6

Press [REC I] to start recording.
“I” will be displayed for 5 seconds.

7

Press [STOP C] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 66.)
e.g.) DVD+R/DVD-RW/-R

Introduction

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Connections

I

SP

1:53

To set one-touch timer recording (OTR)...

Wait for a moment

Basic Setup

Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.

90%

This operation may take
awhile to be completed.

I

Disc
Management

This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0:30

0:30

8:00

Recording

(normal recording)

1:00

7:30

Playback

• To change the recording length during one-touch
timer recording, press [REC I] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP C].

Editing

• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• You cannot change the recording mode during the recording pause mode.

Note for one-touch timer recording

EN
E7PEAUD_DR430KU_EN.indd 37

Others

• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the unit into the standby mode (One-touch timer recording will be canceled.).
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to
the timer-standby mode automatically if a timer recording has been programmed. Press [I/y
yON/STANDBY] to
cancel the timer-standby mode to use the unit continuously.

Function Setup

Note

37

2009/12/14 18:32:34

TIMER RECORDING
Guide to Timer Programming Display
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Connect the external tuner to either L1 or L2 and set it
to output audio/video signals when it comes to the time
you want to start recording.
• Do not change the external tuner’s channel while you
are recording. You cannot watch one channel and
record another at the same time.
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

AUDIO

3

1
JAN/ 8/10 1:00 AM L1 SP
SP (1:00)
Date
JAN/08

THU JAN/07 10:00AM

Start
End
1:00AM 2:00AM
New Program

L1/L2
L1

1/1

4

5

1. Title of a Timer Program (Contains date, time, external
input, recording mode of the program)
2. Current date and time
3. Recording mode and length of the recording
4. Timer program list
5. Total number of pages and current page (2 pages maximum)

1
2

Press [TIMER PROG.].

Use [K / L] to select “New Program”,
then press [ENTER].
Timer Programming

MENU/LIST

TOP MENU

2

Timer Programming

THU JAN/07 10:00AM
Date

Start
End
New Program

L1/L2

ENTER
CLEAR

RETURN

1/1
SKIP

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

• If there are 6 or more programs, use
[SKIP j / i] to change pages.

ZOOM

Note
• If you have not set the clock yet:
“Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 3 in
“Clock Setting” on page 25 before setting a timer programming.
• Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.
• You cannot make a program whose recording time exceeds 12 hours.
• Cancel the timer-standby mode by pressing [I/y
yON/STANDBY] before operation. When finished operating, press
[I/y
y ON/STANDBY] to resume the timer-standby mode.

38

EN

E7PEAUD_DR430KU_EN.indd 38

2009/12/14 18:32:36

3

Use [K / L] to enter the date, then
press [B].
Start
--:-Mode
SP

End
--:--

SP

Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.

2 : 00
Date
JAN/08
L1/L2
L1

JAN/01

MON-SAT
MON-FRI
SAT

Start
1 : 00AM
Mode
Auto

End
2 : 00AM

Auto

1 : 00

• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.

Basic Setup

When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st

Daily

Connections

Date
JAN/08
L1/L2
L1

Introduction

TIMER RECORDING

FRI

SUN

4

Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Start
1 : 00AM
Mode
SP

Press ON/STANDBY to Timer Standby mode.
Ensure the external source is turned to
the correct channel.

End
--:-Timer Programming

SP

JAN/ 8/10 1:00 AM L1 SP
SP (1:00)

2 : 00

Date
JAN/08

• You cannot make a program whose recording
time exceeds 12 hours.

End
2 : 00AM

SP

Date
JAN/08
L1/L2
L1

Start
1 : 00AM
Mode
SP

End
2 : 00AM

L1/L2
L1

8

Press [I/y
y ON/STANDBY] to set a
timer programming.
will appear on the front panel display, while this
unit waits to make the recording.
CS

DR

CD
HDD

SP

1 : 00

Refer to “Recording Mode” on page 33.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Start
1 : 00AM
Mode
SP

Others

Date
JAN/08
L1/L2
L1

End
2 : 00AM

SP

1 : 00

EN
E7PEAUD_DR430KU_EN.indd 39

Function Setup

6

1 : 00

Use [K / L] to select a recording
mode.

End
2:00AM

Editing

Start
1 : 00AM
Mode
SP

THU JAN/07 10:00AM

Your program setting is stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 40.

Use [K / L] to select an appropriate
external input (L1/L2) to which your
external tuner is connected, then
press [B].
Date
JAN/08
L1/L2
L1

Start
1:00AM

Playback

5

After displaying an instructive message for 10
seconds, timer program list will appear.

Recording

Date
JAN/08
L1/L2
L1

7

Press [ENTER] when all items are
entered.

Disc
Management

JAN/31

39

2009/12/14 18:32:38

TIMER RECORDING
To stop the timer recording in progress
1) Press [STOP C] on the remote control.
Confirmation message will appear.

If the timer program did not complete correctly,
the error number appears in the timer
programming list.
Timer Programming

2) Select “Yes”, then press [ENTER].

THU JAN/01 10:00AM

• To stop the timer recording immediately, press
[C STOP] on the unit.

E41

Date
JAN/08

Start
End
1:00AM 2:00AM
New Program

Checking, canceling, or correcting the timer
programming information

1/1

Each error number means:

1) Press [I/y
y ON/STANDBY].

E1-22 Recording error other E40
E37-39 than below

2) Press [TIMER PROG.].

E23-24 Unrecordable disc

3) Check the information on the list you want to edit.
Timer Programming
JAN/ 8/10 1:00 AM L1 SP
SP (1:00)
Date
JAN/08

L1/L2
L1

THU JAN/07 10:00AM

Start
End
1:00AM 2:00AM
New Program

L1/L2
L1

1/1

4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
Selection menu will appear.
3 Use [K / L] to select “Yes”, then press [ENTER].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select “Program Change”, then
press [ENTER].
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].

E25-28 Copy prohibited program

Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.

E29

Disc protected

E41

Power failed

E30

Disc full

E42

No disc when recording

E31-32 Already 99 titles
recorded

E43

Already 49 titles
recorded

E33

Already 999 chapters
recorded

E44

Already 254 chapters
recorded

E34

No space for Control
information

E45

Copy prohibited
program

E35

PCA full *1

E46

E36

Already finalized
video format disc

It is impossible to
record additionally
on a disc recorded
by other units
when setting
“Make Recording
Compatible” to “OFF”.

• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.

5) Press [TIMER PROG.] to exit.
6) Press [I/y
y ON/STANDBY] to return to the timer
standby mode.

Note
• Press [TIMER PROG.] to check the timer recording in
progress.
When the timer recording is proceeding, that
program will be highlighted in red. In this case, you
cannot select any other program.

40

EN

E7PEAUD_DR430KU_EN.indd 40

2009/12/14 18:32:41

Hints for Timer Recording

Disc
Management

The Priority of Overlapped Settings

Recording

This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled or start from the middle.
Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.

When the starting time and the ending time
for each programs are different:
A program that has earlier start time has priority.
PROG. A

PROG. B

PROG. B

Playback

PROG. A

PROG. C
actual
PROG.
PROG.AA
PROG. B
recording
The first 2 minutes (at the longest) will be cut off.

actual
PROG. A
PROG. C
recording
The first 2 minutes (at the longest) will be cut off.

PROG. B

When the recording time is entirely overlapped:
PROG.A will not be recorded.
PROG. A

PROG. B

PROG. B

actual
PROG.B
PROG.A
recording
The first 2 minutes (at the longest) will be cut off.

actual
recording

Function Setup

PROG. A

Editing

When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.

Basic Setup

• To cancel the timer standby mode, press
[I/y
y ON/STANDBY].
• When the starting and the ending time are the same,
“Exceeds 12 hours” appears and the program setting will
not be accepted.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
[I/y
y ON/STANDBY] is pressed.
• “Press ON/STANDBY for timer recording” will appear on
the TV screen 5 minutes before the programmed
starting time.

Connections

• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• If a disc is not inserted or if a inserted disc is not
recordable (finalized DVD-RW/-R, finalized DVD+RW, a
fully recorded disc, etc.),
on the front panel display
flashes and timer recording cannot be performed. In
some cases,
will appear momentarily around the start
point as the unit attempts to record. Please insert a
recordable disc.
• When all the timer recording is completed, flashes. To
play back or eject the recorded disc, press
[I/y
y ON/STANDBY] first, then select the recorded title and
press [PLAY B], or [OPEN/CLOSE A] to remove the disc.
• During timer recording or timer standby mode ( will
appear), any operations on the unit will not be available.
To make these operations available, press [STOP C] or
[C STOP] to stop the timer recording or
[I/y
y ON/STANDBY] to cancel timer standby mode (
will disappear).

Introduction

TIMER RECORDING

PROG. B

Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.

Others

• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
program will be displayed with errors number E40 in the
timer programming list.

PROG. A
PROG. B
actual
recording

PROG. A

PROG. B

The first 2 minutes (at the longest) will be cut off.

EN
E7PEAUD_DR430KU_EN.indd 41

41

2009/12/14 18:32:42

SATELLITE LINK
OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

TIMER
PROG.

SPACE

SETUP

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to “SETTINGS FOR THE VIDEO INPUT” on page 26.

DISPLAY

TOP MENU

AUDIO

MENU/LIST

ENTER
CLEAR

SKIP

RETURN

FWD

REV

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

1
2

SKIP

ZOOM

Select the desired recording mode.
(Refer to “Recording Mode” on page
33.)
Press [SATELLITE LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press [SATELLITE LINK] or [I/y
y ON/STANDBY].
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP C].

SE-R0265

Note
• If the signal of external input breaks up over 5 seconds, recording will stop until the signal of external input comes
back again.
• You cannot set the start or the end time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
recording.
• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 43 for more
information.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are
recorded as illustrated below.
example 2

example 1
timer
recording

timer
recording

timer
recording

satellite link

satellite link

satellite link

actual
recording

actual
recording

actual
recording

The first 2 minutes (at the longest) will be cut off.

42

example 3

The first 2 minutes (at the longest) will be cut off.

EN

E7PEAUD_DR430KU_EN.indd 42

2009/12/14 18:32:44

Introduction

SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device

Connections

Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).
Use the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use the DV IN jack on the front panel instead of VIDEO IN jack.

or
VIDEO
OUT

AUDIO OUT
L
R

DV-OUT

AUDIO OUT
R
L

VIDEO
OUT

S-VIDEO
OUT

Basic Setup

external device
(camcorder, VCR etc.)

RCA
video
cable

RCA
audio
cable

DV cable
(4-pin)

RCA
video
cable

RCA
audio cable

or

S-video
cable

Disc
Management

VIDEO VIDEO
IN
OUT

L

or
VIDEO

L

R

DV IN

R
AUDIO IN
(L1)

L2

IN
S-VIDEO

L3
L1
to L1

Recording

to L2 & L3

VIDEO
IN

L

R
AUDIO IN
(L1)

front of this unit

HDMI OUT

IN

PR/CR

COMPONENT
VIDEO OUT

OUT

COAXIAL

S-VIDEO

DIGITAL AUDIO OUTPUT
PCM / BITSTREAM

rear of this unit

Playback

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.

Editing
Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 43

43

2009/12/14 18:32:46

SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 43.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SETUP

DISPLAY

TOP MENU

SATELLITE
LINK

AUDIO

3

Select the input of the unit which the
external device is connected. (L1, L2
or DV(L3))

4
5
6
7

Press [REC MODE] repeatedly to
select a recording mode.

MENU/LIST

ENTER
CLEAR

SKIP

RETURN

FWD

REV

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

1

44

SKIP

PAUSE

REPEAT REC MODE

REC

Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes awhile to load
the disc.

TIMER
PROG.

SPACE

1
2

Turn on the TV and press
[I/y
y ON/STANDBY], and be sure to
select the input of the TV to which
the unit is connected.

ZOOM

2

• To use the input jacks on the rear of this unit;
Select “L1 (Rear)” by using [INPUT SELECT ].
• To use the input jacks on the front of this unit;
Select “L2 (Front)” or “L3 (DV-IN)“ by using
[INPUT SELECT ].

Refer to “Recording Mode” on page 33.

Press [CSTOP] on the unit to stop
recording.
This operation may take
awhile to be completed.

Start playback on the external device
to record from.
Press [I REC] on the unit to start
recording.

5

7

EN

E7PEAUD_DR430KU_EN.indd 44

2009/12/14 18:32:47

Introduction

DV DUBBING
Guide to DV and On-Screen Display

When the DVC is
in video mode...

1

1/ 1

1/ 1
-RW

2

Control
DV Audio
Start Rec

DVD
Stereo1

VR

1/ 1

ORG

L3 (DV-IN)
AB-1234
0:12:34

-RW

The menu changes according to
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.

VR

ORG

5

L3 (DV-IN)
AB-1234
0:12:34

1:00

SP

4

7

Disc
Management

SP

3

When the DVC is not
in camera mode...

Basic Setup

1/ 1

Connections

This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV IN jack on the front of this unit, select “L3
(DV-IN)” position by using [INPUT SELECT ] on the remote control and press [DISPLAY] to show the DV dubbing
information for the operation of your DVC.

1:00

6

Recording

The following instructions are described with the operations using the remote control of this unit.
6. Product name of your DVC
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
Each icon means (Available icons
may vary depending on the DVC):
DVC is in stop mode.

DVC is in pause mode.

DVC is in recording pause
mode.
Others

EN
E7PEAUD_DR430KU_EN.indd 45

Function Setup

DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is slow forwarding.
(faster than above)
DVC is slow forwarding.
(faster than above)

DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is in recording.

Editing

DVC is in playback mode.

Playback

1. DV icon
2. Indicator of active device
• When the “Control” is
highlighted, press [ENTER] to
display the item selection. Use
[K / L] to select the device you
wish to operate, then press
[ENTER] to activate.
• Select “DVD” to control this unit.
• Select “DVC” to control your DVC.
3. Recording audio mode
• Other than the DVC is in stop
mode, the “DV Audio” can be
selected. Press [ENTER] to display
the item selection and then use
[K / L] to select the audio you
wish to output. Press [ENTER]
again to activate.
• Select “Stereo1” to dub the stereo
sound.
• Select “Stereo2” to dub the sound
with after recording sound.
• Select “Mix” to dub the stereo1
and stereo2.
4. Indicator of dubbing function
• When the unit is ready for
dubbing, “Start Rec” will appear.
• When the unit is in dubbing,
“Pause Rec” will appear.
5. Channel position
• When you select “L3 (DV-IN)” by
using [INPUT SELECT ], “L3
(DV-IN)” will appear.

45

2009/12/14 18:32:48

DV DUBBING
DVC to DVD Dubbing
Before recording from DVC, see page 43 for connection
instructions.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

2
3
4

TIMER
PROG.

SPACE

Press [REC MODE] repeatedly to
select a recording mode.
(Refer to “Recording Mode” on page 33.)

Press [DISPLAY].

With “Control” highlighted, press
[ENTER] to display the available
devices to control with the remote
control of this unit. Use [K / L] to
select “DVC”, then press [ENTER].
1/ 1

SETUP

DISPLAY

-RW
Control
DV Audio
Start Rec

MENU/LIST

TOP MENU

1/ 1

AUDIO

DVD
Stereo1

VR

ORG

L3 (DV-IN)
AB-1234
0:12:34

ENTER
CLEAR

SKIP

FWD

REV

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REC

ZOOM

SE-R0265

Preparing for DV to DVD dubbing:
• Insert a recordable disc and make sure your DVC is in
video mode.

Use [INPUT SELECT
(DV-IN)”.

1:00

Now you can operate your DVC with the remote
control of this unit.

SKIP

PAUSE

REPEAT REC MODE

1

XP

RETURN

5

Press [PLAY B] to start playing back
the DVC, and find the point where
you wish to start dubbing.
Then, press [STOP C] when you come
to the desired start point.

6
7

Use [K / L] to select “Start Rec”, then
press [ENTER].
The dubbing will start.

To stop dubbing;
Use [K / L] to select “Control”, then
press [ENTER].
Use [K / L] to select “DVD”, then
press [ENTER].
Then press [STOP C].

] to select “L3

L3 (DV-IN)
AB-1234
0:00:00

46

EN

E7PEAUD_DR430KU_EN.indd 46

2009/12/14 18:32:53

Note for DV dubbing

•
•
•

Basic Setup

•
•
•

If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.
The unit does not send out the output signal to DVC.
For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
Do not connect more than 1 DVC.
The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
If no video signal is detected from the DVC during DVC to DVD dubbing, the recording will be paused and “I” will
flash on the TV screen. The recording will resume when the unit detects the video signal again.
When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 45.
You cannot dub from DVC during timer standby mode.
During timer standby of either component, you cannot select L3(DV-IN) even on the component which is not in
timer standby.
Date / time and cassette memory data will not be recorded.
Pictures with a copy-guard signal cannot be recorded.
A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices with little degradation.

Connections

•
•
•
•
•
•

Introduction

DV DUBBING

Disc
Management
Recording
Playback
Editing
Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 47

47

2009/12/14 18:32:57

INFORMATION ON PLAYBACK
Structure of Disc Contents
The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.
Audio CDs are divided into tracks.
Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files.
DVD
Title 1
Titl
Titl 2
Title
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

Title:
Chapter:
Track:
Folder:

Divided contents of a DVD video. Roughly
corresponds to a story title in short stories.
Divided contents of a title. This corresponds to
a chapter in a story.
Divided contents of an audio CD.
Divided contents of a MP3/JPEG data disc.
Consists of number of files.

Audio CD
Track 1

Track 2

Track 3

Track 4

Track 5

Each title, chapter, or track, folder or file is assigned a
number, which is called “title number”, “chapter number”,
“track number”, “folder number” or “file number”
respectively.
Some discs may not have these numbers.

MP3/JPEG
folder 1
file 1

48

file 2

folder 2
file 3

file 4

file 5

EN

E7PEAUD_DR430KU_EN.indd 48

2009/12/14 18:32:57

Introduction

BASIC PLAYBACK
Direct Playback

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

TIMER
PROG.

SPACE

DISPLAY

TOP MENU

MENU/LIST

ENTER
CLEAR

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REC

ZOOM

It may take awhile to load
the disc completely.

Press [PLAY B] to start playback.
If you are playing back a DVD-video, a menu
may appear.
Refer to “Using the Title/Disc Menu” on page 53.

Press [STOP C] once to stop playback
temporarily.

Playback

REPEAT REC MODE

3
4
5

Press [OPEN/CLOSE A] to close the
disc tray.

Recording

SKIP

Align the disc to
the disc tray guide.

AUDIO

Disc
Management

SETUP

Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.

Basic Setup

INPUT
SELECT

Turn on the TV and be sure to select the input to
which the unit is connected.

Connections

OPEN/
CLOSE

1
2

Press [I/y
y ON/STANDBY].

• Refer to “Resume Playback” on page 54.

Editing

SE-R0265

Function Setup

Note
• Some discs may start playback automatically.

Others

EN
E7PEAUD_DR430KU_EN.indd 49

49

2009/12/14 18:32:58

BASIC PLAYBACK
Playback from the Title List

2

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

TUV

SATELLITE
LINK
WXYZ

PQRS

TIMER
PROG.

SPACE

SETUP

DISPLAY

TOP MENU

AUDIO

MENU/LIST

ENTER
CLEAR

SKIP

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

ZOOM

Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.

Align the disc to
the disc tray guide.

3
4
5

Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.

Press [TOP MENU].
Title list will appear.
Press [MENU/LIST] to switch Original/Playlist if
necessary.
• To exit the title list, press [STOP C].
• To resume the title list, press [TOP MENU].

Use [K / L / { / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
ORG

Title List

JAN/ 7/10 1:00AM L1 SP
1:00AM (0:12:00)
JAN/ 7/10

SE-R0265

L1 SP

1

2

3

4

5

6

1/6

Press [I/y
y ON/STANDBY].

1

Turn on the TV and be sure to select the input to
which the unit is connected.

Note
• You can also start playback by pressing [PLAY B]
instead of [ENTER].
• At step 4, you can press [SKIP G], or press [B]
when the title on the lower right of the title list is
highlighted to display the next page, and press
[SKIP H], or press [{] when the title on the upper
left of the title list is highlighted to display the
previous page.

50

6

Use [K / L] to select “Play From
Start”, then press [ENTER].

7

Press [STOP C] once to stop playback
temporarily.

Play From Start
Edit
Title Delete
Add To Playlist

• Refer to “Resume Playback” on page 54.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.

EN

E7PEAUD_DR430KU_EN.indd 50

2009/12/14 18:32:59

Introduction

BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG files

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

DISPLAY

TOP MENU

AUDIO

MENU/LIST

ENTER
RETURN

CLEAR

REV

PAUSE

PLAY

SKIP

STOP

Follow steps 1 to 2 in “Direct
Playback” on page 49.
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.

Note

File List
DISC NAME
A
B
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6

Others

e.g.) JPEG file list

This DVD Video Recorder requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. There are many different types
of recordable disc formats (including CD-R containing
MP3 files). Not all recordable discs will operate or
produce optimal playback quality. The technical criteria
set forth in this owner's manual are meant only as a
guide. Use of CD-RW for MP3 files is not recommended.

Function Setup

Use [K / L] to select a desired folder
or track/file, then press [ENTER].

• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Files whose extension is other than “.mp3(MP3)” or
“.jpg / .jpeg(JPEG)” will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
• The JPEG pictures can also rotate by using [s / B].

Editing

When an audio CD is inserted, track list will
appear.
When you insert a CD-RW/-R mixed with MP3/
JPEG files, the playback media selection screen
will be displayed.
For MP3, select “Music”, for JPEG, select “Photo”.
When a CD-RW/-R with MP3/JPEG files is
inserted, file list will appear.
• To exit the file list, press [STOP C].
• To resume the file list, press [TOP MENU].
• Press [MENU/LIST] to call up the playback
media selection screen in stop mode.

3

It is recommended that files to be played back in this
unit are recorded under the following specifications:

• Sampling frequency
: 44.1 kHz or 48 kHz.
• Constant bit rate
: 112 kbps - 320 kbps.

• Upper limit
: 6,300 x 5,100 dots.
• Lower limit
: 32 x 32 dots.
• File size of image maximum : 12 MB.

Playback

1
2

FWD

Recording

SKIP

Disc
Management

Hints for audio CD tracks and MP3 / JPEG files:
• Folders are shown by
.
• Audio CD tracks are shown by
.
• MP3 files are shown by 3 .
• JPEG files are shown by
.
• The system can recognize up to 255 folders and, up to
99 tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “…”.
• If there are no files in the folder, “No Files” will be displayed.

TIMER
PROG.

SPACE

SETUP

When selecting folder:
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [ENTER].
• Press [PLAY B], [ENTER] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.

Basic Setup

OPEN/
CLOSE

Connections

When selecting track/file:
Playback will start.

You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
1/ 2

EN
E7PEAUD_DR430KU_EN.indd 51

51

2009/12/14 18:33:01

BASIC PLAYBACK
Playing Back a USB Device with MP3 / JPEG files

Note for USB device
USB device requirements:
• USB version 2.0 (Full Speed).
• USB devices formatted with the FAT16 and FAT32 file
systems are supported.
• Up to 8 characters (excluding the extension) are
displayed as a file and folder names. 9 or more
characters cannot be displayed.
Compatible device:
• USB flash memory (maximum size : 32GB)
Incompatible device:
• USB hub
• USB device with inner hub
• PC
• Cameras
• Devices that need to install drivers
(e.g. some MP3 players)

1

In stop mode, plug your USB flash
memory.
File type selection screen will appear.

Title List
DISC
USB

Music
Photo

2

Select the desired file type using
[K / L], then press [ENTER].

3

Follow the step 3 in “Playing Back an
Audio CD or a CD-RW/-R with MP3 /
JPEG files” on page 51.

• If you want to change the media type, press
[{].
Select the desired media type using [K / L],
then press [ENTER]. (You can also access the
media type selection screen from the “Title
List” in the “Setup” menu in stop mode.)
• Music: The MP3 File List will appear.
• Photo: The JPEG File List will appear.

Note
• The unit cannot play back a USB device at the
following condition.
- During the operation of the disc tray.
- During the disc loading, DVD recording, DVD/CD
playback, editing or dubbing.
- While “Title List” or “File List” of disc is displayed.
- While “Setup” or “Timer Programming” menu is
displayed.
• Do not disconnect the USB device while the indicator
on the device is flickering.

52

EN

E7PEAUD_DR430KU_EN.indd 52

2009/12/14 18:33:03

Using the Title/Disc Menu

Introduction

BASIC PLAYBACK
Pause
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.

Connections

DVD may contain a title list, which describes the contents
of the disc, or a disc menu, which guides you through the
available functions in the disc.
1) Press [TOP MENU] or [MENU/LIST] to call up the title
list or disc menu.

Basic Setup

2) Use [K / L / { / B] to make a selection, and then
press [ENTER] to enable your selection.

F

3) Press [STOP C] to exit the disc menu.

Note

Note
• For DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 86.)

Disc
Management

• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [MENU/LIST] or [TOP MENU] will not always be
effective for all DVDs.

2) Press [PLAY B] to return to the normal playback.

Recording
Playback
Editing
Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 53

53

2009/12/14 18:33:05

SPECIAL PLAYBACK
Resume Playback
You can play back from where you stopped playing back
the disc last.
1) During playback, press [STOP C].
The resume message will appear.
Resume ON

2) Press [PLAY B].
In a few seconds, playbackk will resume from the point
at which it stopped last. You can resume playbackk at
the same point even if you turn the unit into the
standby mode.
To cancel the resume playbackk and start playing back
the disc from the beginning, press [STOP C] again
while the playbackk is stopped.

Skipping TV Commercials During
Playback
You can skip TV commercials to enjoy the recorded
programs without interrupting.
During playback, press [INSTANT SKIP].
Normal playback will start at 30 seconds ahead from
where you press [INSTANT SKIP].
Every time you press [INSTANT SKIP], the searching
point will be extended by 30 seconds ahead.
You can press [INSTANT SKIP] up to 6 times (180 seconds).
e.g.) Press [INSTANT SKIP] once.

Note
• For MP3/JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
• For USB devices, the file list will appear at step 1).
- Press [STOP C] again to exit from the file list.
- Press [PLAY B] to resume playback.

Instant Skip 30sec.

(forwarding 30 seconds)

Fast Forward / Fast Reverse Playback

1) During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD), or files (for MP3 files) is not possible.
FWD

40x

REV

FWD

20x

REV

FWD

5x

REV

FWD

normal
speed
playback

REV

FWD

2x

REV

B

Playback will return to the normal playback.

FWD

20x

REV

40x

For audio CD or MP3 files, approximate speed is fixed
at 8x with sound.
2) Press [PLAY B] to return to the normal playback.

Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:

54

EN

E7PEAUD_DR430KU_EN.indd 54

2009/12/14 18:33:06

Rapid Playback

B x1.3:

Press [1.3X / 0.8X PLAY] thrice to play back in
normal speed.
No effects.

2) Press [PLAY B] to return to the normal playback.

Note

1/4x

REV

FWD

1/8x

REV

FWD

1/16x

REV

FWD

pause

REV

FWD

1/16x

REV

FWD

1/8x

REV

1/3x

2) Press [PLAY B] to return to the normal playback.

Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:

Recording

• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is LPCM (2 channel) during rapid playback.

FWD

Disc
Management

B:

Press [1.3X / 0.8X PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.

1) During playback, press [PAUSE F]. Then press
[FWD D] or [REV E].
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows. (The
sound will remain muted.)

Basic Setup

B x0.8 : Press [1.3X / 0.8X PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.

Slow Forward / Slow Reverse Playback

Connections

Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
1) During playback, press [1.3X / 0.8X PLAY].

Introduction

SPECIAL PLAYBACK

Playback

Step by Step Playback

Editing

1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Press [SKIP i ] repeatedly.
Playback will advance one frame at a time when you
press [SKIP i ] with the sound muted.
To play back step by step backward:
Press [SKIP j ] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [SKIP j ] / [SKIP i ] to reverse/
advance continuously.
3) Press [PLAY B] to return to the normal playback.

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 55

55

2009/12/14 18:33:09

SPECIAL PLAYBACK
Marker Setting

Zoom

1) During playback, press [DISPLAY] or [ZOOM].
• If you press [ZOOM], skip to step 3.
2) Use [{
{ / B] to select
menu.
e.g.) DVD-video
1/ 5

1/ 5

0:01:00 / 1:23:45

This feature allows you to assign a specific point on a disc
to be called back later.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
{ / B] to select
2) Use [{
e.g.) DVD-video

to display the marker list.

DVD Video

1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

3) Use [K / L] to select a desired zoom factor to zoom,
then press [ENTER].
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

3) Use [K / L] to select a desired marker number.
When it reaches the desired point, press [ENTER].

× 1.2
× 1.5
× 2.0

1/ 5

1/ 5

DVD Video
1
2
3
4

Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
Zoom area will be displayed.
4) Use [K / L / { / B] to select a desired zoom
position, then press [ENTER].

0:01:00 / 1:23:45

5
6

-------------

The title (track) number and the time will be displayed.
4) To return to the marker:
Use [K / L] to select the desired marker number,
then press [ENTER].

Note

Zoom playback will start.

• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning the unit into the standby mode
– Recording on a recordable disc
• You can mark up to 6 points.

Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [RETURN] repeatedly.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [ENTER] at step 3.
• You cannot slide the zoomed picture on some JPEG
files.

56

EN

E7PEAUD_DR430KU_EN.indd 56

2009/12/14 18:33:13

Introduction

SPECIAL PLAYBACK
Chasing Playback during Recording

6/ 6

1/ 1

0:01:00 / 1:23:45
-RW

ORG

LP

1:01

2) Press [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
1

1:23:45
-RW

VR

ORG

L1 (Rear)

Resume ON

LP

1:01

Note

To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.

Editing

• Playback image may freeze momentarily using this
function.
However, this does not affect the recording.
• The 2x fast forward playback is not available.
• [REC I] is not available during this function.
• You must cancel this function first by pressing
[STOP C] once. Then you can use [REC I] to use
OTR (one-touch timer recording) function or change
recording time for the OTR.
• “Wait for a moment.” will be displayed on the screen
if you press [PLAY B] before 1 minute of recording.
• This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.

Playback

6

To cancel the resume, press [STOP C] again.

Recording

If you play back the fast forward playback and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to
the normal playback.

Disc
Management

Resume ON

VR

With [TIME SLIP], even if you leave your couch while
you are watching TV through this unit, you can come
back and watch rest of the program from right where
you left at any convenient time with just one button.
Please make sure to put VR mode DVD-RW disc, and set
the recording mode to LP, EP or SLP.
1) While viewing a TV broadcast via this unit, press
[TIME SLIP].
This unit start to record the TV broadcast.
2) Press [TIME SLIP] again.
Playback will start from the point at which you press
[TIME SLIP] first while recording continues.
• While viewing the recorded content, you can pause
and resume the playback by pressing [TIME SLIP].
3) Press [STOP C] once to stop playback.
To stop recording, press [STOP C] again.

Basic Setup

1) During recording, press [PLAY B].
Playback will start from the beginning of the program
that you are currently recording.
Screen for the current playback:

Using [TIME SLIP] ...

Connections

You can play back the already recorded part of the
currently recording program without waiting for the
recording to the end. This function works from 1
minute after the start of the recording.

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 57

57

2009/12/14 18:33:15

SPECIAL PLAYBACK
Simultaneous Playback and Recording
You can also play back a recorded title during current
recording or the timer recording on the same disc.

C] once to stop playback.
The resume message will appear.
Screen for the current recording:

1) During recording, press [DISPLAY].
Screen for the current recording:

3

1

1:30:25
-RW

VR

ORG

L1 (Rear)

3

1

1:23:45
-RW

VR

ORG

L1 (Rear)

Resume ON

2) Select
{ / B], then press [ENTER].
The title number next to
will be highlighted.
Title:
Enter a desired title number to search using
[K / L] or [the Number buttons], then press
[ENTER].
Selected title playback will start.
Chapter:
To move to
for chapter, press [B].
Enter a desired chapter number to search using
[K / L] or [the Number buttons], then press
[ENTER].
Selected chapter playback will start.
If you play back the currently recording program and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to the
normal playback.

58

LP

1:01

To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.

Note
• Playback image may freeze momentarily using this
function.
However, this does not affect the recording.
• The 2x fast forward playback is not available.
• This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
• Only the titles (chapters) in the original can be
selected.
You cannot select titles from the title list.
• When you stop the playback after the timer
recording is completed, the unit will be switched to
the timer standby mode if another program has been
set (refer to “Hints for Timer Recording” on page 41).

EN

E7PEAUD_DR430KU_EN.indd 58

2009/12/14 18:33:16

Title/Chapter Search

Introduction

SEARCH
Track Search

1) During playback, press [SKIP i] to skip the
current track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [SKIP j ].
(For JPEG files, press it once to go to the previous file.)
Press it twice in quick successions to go to the previous
track/file. The track/file will move backward one at a
time.

To go back to the beginning of the current title or
chapter, press [SKIP j ].
Press it twice in quick successions to go to the previous
title or chapter. The title or chapter will move
backward one title at a time.

Using [DISPLAY]
Using [DISPLAY]
2) Use [{
{ / B] to select
e.g.) DVD-video
1/ 5

1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{
{ / B] to select
e.g.) audio CD

1/ 5

Disc
Management

1) During playback, press [DISPLAY].

Basic Setup

Using [SKIP j ] / [SKIP i ]

1) During playback, press [SKIP i ] to skip the
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.

Connections

Using [SKIP j ] / [SKIP i ]

0:01:00 / 1:23:45
1/ 5

DVD Video

0:00:15 / 0:05:00
CD

will be highlighted.

e.g.) MP3 files
1/ 5

0:00:15
MP3

The number next to

Playback

will be highlighted.

3) Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[ENTER].
After the search, playback will start automatically.

Editing

3) Title:
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [ENTER].
Title search will start.
Chapter:
Press [B] to move to the number next to
for
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press
[ENTER].
After the search, playback will start automatically.

Recording

The number next to

Note

Note

1/ 5

1/ 5

• During CD playback, you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.

0:01:00 / 1:23:45
DVD Video

Others

total number
total time
of titles
of the title
total number
of chapters

EN
E7PEAUD_DR430KU_EN.indd 59

Function Setup

• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.

59

2009/12/14 18:33:18

SEARCH
Time Search

1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.

2) Use [{
{ / B] to select
e.g.) DVD-video
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

e.g.) audio CD
1/ 5

0:00:15 / 0:05:00
CD

The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.

and time

3) Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [ENTER].
After the search, playback will start automatically.

Note
• Time search is available only in the same track, file or
title.

60

EN

E7PEAUD_DR430KU_EN.indd 60

2009/12/14 18:33:20

Repeat Playback

Note

{ / B] to select
2) Use [{
menu.
1/ 5

0:01:00 / 1:23:45
DVD Video

3) Use [K / L] to select a desired option to repeat,
then press [ENTER].
The selected repeat playback will start.

Random Playback
Disc
Management

e.g.) DVD-video
OFF
Title
Chapter
A-B

OFF
Track
All
A-B

e.g.) MP3/JPEG files

1/ 5

0:00:15 / 0:05:00
CD

Random

Editing

Note
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
display menu.
• For USB devices, select “Random Play”in
“USB Playback Mode”.

Function Setup

Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER].
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.

2) Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
For MP3, use [K / L] to select “Music”, then press
[ENTER].
For JPEG, use [K / L] to select “Photo”, then press
[ENTER].
3) Use [K / L] to select “Random Play”, then press
[ENTER].
Random playback will start.
e.g.) audio CD

Playback

OFF
Track
All
Group

You can play back a disc randomly instead of playing
back in the original order.
1) Press [SETUP] in stop mode.

Recording

e.g.) audio CD

Basic Setup

1/ 5

to display the selection

• Point B for the repeat A-B playback should be set
within the same title or track of point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random
playback of MP3/JPEG files.
• Chapter/Track repeat will be canceled whenever a
Chapter/Track is skipped forward or backward.
• During the A-B repeat, if you reaches the point A
with any reverse playback, the reverse playback will
be canceled and the A-B repeat playback resumes
from point A.

Connections

Available repeat function may vary depending the discs.
1) During playback, press [DISPLAY] or [REPEAT] to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• If you press [REPEAT], skip to step 3.

Introduction

REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW

Others

EN
E7PEAUD_DR430KU_EN.indd 61

61

2009/12/14 18:33:21

REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Program Playback

Slide Show

You can program the disc to play back in your desired
order.
1) Press [SETUP] in stop mode.
2) Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
3) Use [K / L] to select “Program Play”, then press
[ENTER].
4) Use [K / L] to select a desired track, then press
[ENTER] or [B].

You can select the display time between 5 seconds and
10 seconds.
1) Follow steps 1 and 2 in “Program Playback” on the
left.
2) Use [K / L] to select “Photo”, then press [ENTER].
3) Use [K / L] to select “Slide Show”, then press
[ENTER].
4) Use [K / L] to select the display time, then press
[ENTER].
5) Press [SETUP] to exit.

DISC Playback Mode
Program Play
--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Total

0:00:00

Note
• Large-size JPEG files take a few moments to be
displayed.
• For USB devices, select “Slide Show” in
“USB Playback Mode”.

Repeat this step until you program all the desired
tracks.
5) Press [PLAY B].
DISC Playback Mode
Program Play
09

04

10

06

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Total

0:31:07

Program playback will start.

• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.

62

EN

E7PEAUD_DR430KU_EN.indd 62

2009/12/14 18:33:23

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

Switching Subtitles

Switching Audio Soundtrack

1/ 5

to display the selection

1/ 5

0:01:00 / 1:23:45
DVD Video

1/ 5

1/ 5

0:01:00 / 1:23:45

to display the selection

3) Use [K / L] to select a desired audio soundtrack or
audio channel, then press [ENTER].
For DVD-video or VR mode DVD-RW
• Audio soundtrack will switch.
e.g.) DVD-video

Disc
Management

3) Use [K / L] to select a desired subtitle language,
then press [ENTER].

2) Use [{
{ / B] to select
menu.

Basic Setup

2) Use [{
{ / B] to select
menu.
e.g.) DVD-video

When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back audio CD, you can switch “L/R”(stereo),
“L”(left) or “R”(right).
1) During playback, press [DISPLAY] or [AUDIO ]to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• If you press [AUDIO ], skip to step3.

Connections

DVD-video may have subtitles in one or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages during playback.
1) During playback, press [DISPLAY].

Introduction

SELECTING THE FORMAT OF AUDIO AND VIDEO

DVD Video

1/ 5

OFF
1.English

Note

DVD Video
1.Dolby Digital 2ch English
2.Dolby Digital 5.1ch English

• If the title contains both main and sub audio, you can
further select “L“ (main), “R“ (sub), “L/R“ (mixed of
main and sub).
For audio CD
• Audio channel will switch.
e.g.) audio CD
1/ 5

0:00:15 / 0:05:00

Playback

• Some discs will only allow you to change the subtitle
from the disc menu. Press [MENU/LIST] or
[TOP MENU] to display the disc menu.
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 97.

0:01:00 / 1:23:45

Recording

Subtitle will be displayed in the selected language.
When “OFF” is selected, subtitle will disappear.

1/ 5

CD
1. L/R
2. L
3. R

Editing

Note

Function Setup

• Some discs will only allow you to change the
soundtrack from the disc menu. Press [MENU/LIST]
or [TOP MENU] to display the disc menu.

Others

EN
E7PEAUD_DR430KU_EN.indd 63

63

2009/12/14 18:33:24

SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System

You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.

Switching Camera Angles
Some DVD-video have scenes shot from two or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
1) During playback, press [DISPLAY].
2) Use [{
{ / B] to select
1/ 5

, then press [ENTER].

1/ 5

0:01:00 / 1:23:45
DVD Video

2) Use [{
{ / B] to select
menu.
e.g.) DVD-video
1/ 5

to display the selection

1/ 5

0:01:00 / 1:23:45
DVD Video

3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [ENTER].
e.g.) DVD-video
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

OFF
Type 1
Type 2

OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect

Note
• Select “OFF” if sound is distorted.
• The setting will be kept when the unit is turned off.

Angle icon appears when a switching camera angle is available.
Angle will switch each time you press [ENTER].

Note
• Angle icon does not appear on the TV screen if you
set “Angle Icon” to “OFF” in “Playback” menu.
Refer to page 86.

Reducing Block Noise
1) During playback, press [DISPLAY].
2) Use [{
{ / B] to select
menu.
e.g.) DVD-video
1/ 5

to display the selection

1/ 5

0:01:00 / 1:23:45
DVD Video

3)Use [K / L] to, select “Noise Reduction”, then press [ENTER].
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

Noise Reduction OFF
Black Level
OFF

4)Use [K / L] to select a desired option, then press [ENTER].
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

OFF
Type 1
Type 2

This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.

64

EN

E7PEAUD_DR430KU_EN.indd 64

2009/12/14 18:33:26

Introduction

SELECTING THE FORMAT OF AUDIO AND VIDEO
Adjusting Black Level

Connections

You can adjust the black level to control the brightness
of the picture in order to get a better picture.
1) During playback, press [DISPLAY].
2) Use [{
{ / B] to select
menu.
e.g.) DVD-video
1/ 5

Basic Setup

1/ 5

to display the selection

0:01:00 / 1:23:45
DVD Video

Disc
Management

3) Use [K / L] to select “Black Level”, then press
[ENTER].
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

Noise Reduction OFF
Black Level
OFF

Recording

4) Use [K / L] to select “OFF” or “ON”, then press
[ENTER].
Your setting will be activated.
1/ 5

1/ 5

0:01:00 / 1:23:45
DVD Video

Playback

OFF
ON

OFF

: Shows the original picture as recorded.

ON

: Make the darker parts of the picture more
visible.
Editing

Note

Function Setup

• You can adjust black level setting only during
playback.
• The setting will be kept even when the unit is turned
off.
• The default setting is “ON”.

Others

EN
E7PEAUD_DR430KU_EN.indd 65

65

2009/12/14 18:33:29

INFORMATION ON DISC EDITING
Guide to a Title List

Editing Discs

Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
Press [TOP MENU].

4
ORG

5

6

Title List

JAN/ 7/10 1:00AM L1 LP
12:00AM (2:00:00) JAN/ 7/10

L1 LP

1

2

3

4

5

6

1/2

3

2 1
ORG

3

Edit

2

Scene Delete
Edit Title Name
Chapter Mark
Protect

JAN/7/10 11:00PM L1 LP
0 : 00 : 59

11 10

9

8

7

1. Title list: List of the titles recorded on the disc, and
their information.
• For DVD+RW/+R, empty title always appears at the
last of the title list.
• For the titles being blocked by the V-chip system,
“BLOCK” will be displayed and you cannot watch the
contents.
2. The protect icon: Appears when the title has been
protected. (Original titles only)
3. Arrow: Indicating there is a previous / next page.
4. Title list icon: Indicates a type of the displayed title
list.
ORG : VR (Original)
+VR : +VR mode
PL : VR (Playlist)
Video : Video mode
5. Title name
6. Title information: Displays various information on
the selected title.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time and the recording mode are
displayed here.
9. Progress bar: Indicating the progress of the playback.
The vertical lines in the bar indicates chapter marks,
and “L” sliding on the bar indicates current point of
playback displayed in the preview window.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.

Edit the recorded disc
You will find editing discs is easy. This unit offers
convenient edit functions which are possible only with
DVD-RW/-R and DVD+RW/+R.
You can edit the following from a title list.
• Assigning a name to a title
• Dividing a title
• Combining titles
• Adding titles to a playlist
• Erasing all playlist
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
(Possible editing functions depend on the recording
format and editing method.)
Original and playlist (VR mode)
For VR mode DVD-RW, you can edit the recordings in
playlist without changing the original recordings. Playlist
does not take up much disc space. After you make a
recording to VR mode DVD-RW, a playlist will be created
automatically.
What “Original” or “Playlist” is for?
Throughout this manual, you will find original and playlist
which refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on
the VR mode DVD-RW.
• Playlist content refers to the edited version of the VR
mode DVD-RW; how the original content is to be played
back.
Finalizing a disc
• This will allow a disc that is recorded on this unit to be
played back on other DVD player — without finalization
it will not be playable on other DVD player.
• After finalizing a DVD-RW/-R or DVD+R, you cannot edit
any information that is on that disc.
• If you have recorded in DVD+RW, then editing is still
permitted after finalizing.
Using these editing functions to modify copyrighted
content for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the
United States and other countries, and may subject you
to civil and criminal liability.

Press [RETURN] to exit the title list.

66

EN

E7PEAUD_DR430KU_EN.indd 66

2009/12/14 18:33:31

Introduction

DELETING TITLES
Notes for deleting titles

After the disc is fully recorded:
DVD-RW/DVD+RW

The Full-Recorded disc

TITLE 2

TITLE 2

TITLE 2

TITLE 2

TITLE 2
TITLE 3

TITLE 2

You cannot
record
a new title.

Disc
Management

TITLE 3

Deleted titles
cannot create
the space.

TITLE 1

TITLE 3

Delete!

TITLE 3

You can record
a new title.

Basic Setup

Delete!

TITLE 1

TITLE 1

You can record
a new title.

TITLE 1

Delete!

TITLE 1

Delete!

• When a title is deleted from
DVD-R and DVD+R, the
recordable space will NOT be
increased.
The Full-Recorded disc

TITLE 1

TITLE 1

TITLE 2

• When the last title is deleted from
DVD-RW in video mode or DVD+RW, the
recordable space will be increased.

Connections

• When a title is deleted from
DVD-RW in VR mode, the
recordable disc space will
be increased.
The Full-Recorded disc

DVD-R/DVD+R

You cannot
record
a new title.

Recording

[RETURN] several times to exit the editing mode. “Writing to Disc” appears
momentarily. It also appears when pressing [AOPEN/CLOSE] or [I/y
y ON/STANDBY] before exiting the editing
mode after editing.

Note

+VR

Title List

+VR

JAN/7/10 7:00AM L1 SLP
7:00AM (2:00:00)
JAN/7/10

Title List

EMPTY TITLE
SLP

1

2

3

4

5

6
Empty
1/1

1

1Delete
the title
No.5

2

3

Editing

Empty

Playback

• If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.
• You cannot overwrite on the “Empty”
• For DVD+RW, if “Empty” appears right next to the other “Empty”, those “Empty” combines into one.

4
Empty
1/1

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 67

67

2009/12/14 18:33:32

DELETING TITLES
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
Be sure to read “Notes for deleting titles” on page 67
before you delete the title.

1
2

In stop mode, press [TOP MENU].
Title list, original or playlist will appear.
• For VR mode DVD-RW, press [MENU/LIST] to
switch between “Original” and “Playlist”.

Use [K / L/ s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
ORG

OPEN/
CLOSE

INPUT
SELECT

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SETUP

DISPLAY

TOP MENU

AUDIO

MENU/LIST

L1 LP

1

2

3

4

5

6

SATELLITE
LINK

TIMER
PROG.

SPACE

Title List

JAN/ 7/10 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 7/10

HDMI

1/2

3

Use [K / L] to select “Title Delete”,
then press [ENTER].
Play From Start
Edit
Title Delete
Add To Playlist

ENTER
CLEAR

SKIP

Use [K / L] to select “Yes”, then press
[ENTER].

RETURN

REV

FWD

SKIP

Delete this title?
PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

SE-R0265

Yes
No

After that, “Are you sure?” will appear, select
“Yes” and then press [ENTER].
Title will be deleted.

ZOOM

5

Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
Writing to Disc

90%

This operation may take
awhile to be completed.

68

EN

E7PEAUD_DR430KU_EN.indd 68

2009/12/14 18:33:33

Introduction

CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Playlist

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

DISPLAY

AUDIO

MENU/LIST

TOP MENU

4

Use [K / L] to select “Yes”, then press
[ENTER].

SATELLITE
LINK

Use [K / L] to select “Add To
Playlist”, then press [ENTER].
Play From Start
Edit
Title Delete
Add To Playlist

Create a Playlist ?

Recording

Yes
No
ENTER
CLEAR

SKIP

The title is added to playlist.
RETURN

FWD

REV

SKIP

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

5

Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
Playback

PAUSE

Disc
Management

INPUT
SELECT

Use [K / L/ s / B] to select the
desired title, then press [ENTER].

Basic Setup

OPEN/
CLOSE

1
2
3

Connections

wish.
You can add up to 99 titles to a playlist (as long as
the total number of the playlist does not exceed 999
chapters).

Follow the step 1 in “DELETING
TITLES” on page 68 to display the
original.

This operation may take
awhile to be completed.

ZOOM

Editing

SE-R0265

Function Setup
Others

Note
• When a playlist contains 99 titles or more, or 999
chapters or more, “Add to Playlist” cannot be
selected.

EN
E7PEAUD_DR430KU_EN.indd 69

69

2009/12/14 18:33:35

CREATING/DELETING PLAYLIST
Erasing All Playlist
Playlist

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

DISPLAY

TOP MENU

Use [K / L] to select “Delete All
Playlists”, then press [ENTER].
DVD Menu

AUDIO

MENU/LIST

ENTER
CLEAR

SKIP

Use [K / L] to select “DVD Menu”,
then press [ENTER].

Format
Finalize
Disc Protect OFF ON
Delete All Playlists

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

1
2
3

Press [SETUP].
Main menu will appear.

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

4

Use [K / L] to select “Yes”, then press
[ENTER].
Delete entire playlist?
Yes
No

“Are you sure?” will appear.
Use [K / L] to select “Yes” and then press
[ENTER].

ZOOM

DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete
play list?
Areentire
you sure?
Delete All Playlist
Yes
No

SE-R0265

Playlist is deleted.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

Note
• Deleting a playlist will not increase the available
recording time on the disc.

70

EN

E7PEAUD_DR430KU_EN.indd 70

2009/12/14 18:33:37

Introduction

EDITING DISCS
Putting Names on Titles

OPEN/
CLOSE

INPUT
SELECT

HDMI

4

Use [K / L] to select “Edit Title
Name”, then press [ENTER].
ORG

Edit

1

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

DISPLAY

TOP MENU

AUDIO

MENU/LIST

1 : 25 : 47

5

To enter a title name, follow the
steps of “Guide to Edit Title Name”
on page 72.
ORG

Edit - Edit Title Name

1

character set

1 2 3
@ !

RETURN

FWD

SKIP

?

Recording

CLEAR

REV

A B C
a b c

ENTER

SKIP

Disc
Management

SETUP

JAN/ 7/10 1:00AM L1 LP

SATELLITE
LINK

SPACE

Scene Delete
Edit Title Name
Chapter Mark
Protect

Basic Setup

.@/:

Connections

You can put a name on the title and change it from this
menu.

M
1 : 25 : 47

PAUSE

PLAY

STOP

area for entering title names
When you finish entering a title name, press
[ENTER].

Title list, original or playlist will appear.
• For VR mode DVD-RW, press [MENU/LIST] to
switch between “Original” and “Playlist”.

Use [K / L] to select “Yes”, then press
[ENTER].

Use [K / L/ s / B] to select a desired
title, then press [ENTER].

ORG

Edit - Edit Title Name

1

Yes
No

Editing

e.g.) VR mode DVD-RW original
ORG

Title List

JAN/ 7/10 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 7/10

L1 LP

MY FAVORITE

2

3

4

5

6

Use [K / L] to select “Edit”, then press
[ENTER].

1 : 25 : 47

The name you entered will be activated for the title.

7

Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

Others

Play From Start
Edit
Title Delete
Add To Playlist

EN
E7PEAUD_DR430KU_EN.indd 71

Function Setup

1

1/2

3

6

Playback

1
2

In stop mode, press [TOP MENU].

71

2009/12/14 18:33:38

EDITING DISCS
Putting Names on Titles (cont’d)
Guide to Edit Title Name
OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

1) Use [K / L] to select a desired character set, then
press [ENTER].
2) Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
Select

ABC

abc

123

@!?





0



(*1)

(*1)

1

! ”# $ % & ’( )
*+,-./:;<=>
?@[]^_{|}

AUDIO

ABC

abc

2

MENU/LIST

DEF

def

3

GHI

ghi

4

JKL

jkl

5

MNO

mno

6

SKIP

PQRS

pqrs

7

TUV

tuv

8

WXYZ

wxyz

9

Press

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

TOP MENU

ENTER
CLEAR

SKIP

RETURN

FWD

REV

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

SE-R0265

ZOOM

*1 Press
, character set will be changed to the “ @!? ”
mode automatically. Press
to
to go back to
the previous character set.
• To delete letters, press [CLEAR] repeatedly.
Press and hold [CLEAR] to delete all letters.
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.

Note
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.

72

EN

E7PEAUD_DR430KU_EN.indd 72

2009/12/14 18:33:40

Introduction

EDITING DISCS
Setting Chapter Marks

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

DISPLAY

TOP MENU

AUDIO

MENU/LIST

4

Submenu will appear.

Use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the point where
you will create a new chapter mark.
Or, use [SKIP H / G] to find a
chapter mark that you wish to delete.
Use [K / L] to select “Add” or
“Delete”, then press [ENTER].
e.g.) VR mode DVD-RW original
ORG

Edit - Chapter Mark

Recording

ENTER
CLEAR

1

RETURN

Chapter
SKIP

FWD

REV

Add
Delete

2/3

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

Disc
Management

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

Use [K / L] to select “Chapter Mark”,
then press [ENTER].

Basic Setup

OPEN/
CLOSE

1
2
3

Follow steps 1 to 3 in “Putting Names
on Titles” on page 71 to display “Edit”
menu.

Connections

You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.

JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47

REC

ZOOM

5

If you select “Add” at step 4, a new chapter mark
will be added, and if you select “Delete” at step
4, the chapter mark will be deleted.
e.g.) Add
ORG

Edit - Chapter Mark - Add

1

Yes
No

2/3

Function Setup

Chapter

JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47

A new chapter mark will be added.

Note

6
7

Press [RETURN].
Others

• Maximum numbers of chapter for each DVD:
VR mode DVD : 999 chapters per entire original
and playlist
+VR mode DVD : 254 chapters per disc, 99 chapters
per title
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.

Press [RETURN] again and then
[RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

EN
E7PEAUD_DR430KU_EN.indd 73

Editing

SE-R0265

Use [K / L] to select “Yes”, then press
[ENTER].

Playback

REPEAT REC MODE

73

2009/12/14 18:33:42

EDITING DISCS
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SETUP

DISPLAY

Title List
L1 LP
JAN/ 7/10

L1 LP

1

2

3

4

5

6

SATELLITE
LINK

AUDIO

3

Use [K / L] to select “Edit”, then
press [ENTER].

4
5
6

Use [K / L] to select “Hide Chapter”,
then press [ENTER].

Play From Start
Edit
Title Delete

MENU/LIST

TOP MENU

ENTER
CLEAR

SKIP

+VR

JAN/ 7/10 1:00AM
1:00AM (2:00:00)

1/2

TIMER
PROG.

SPACE

2

Use [K / L/ s / B] to select a desired
title, then press [ENTER].

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

ZOOM

Submenu will appear.

Use [SKIP H] or [SKIP G] to decide
the chapter to be hidden.
Use [K / L] to select “Hidden”, then
press [ENTER].
+VR

Edit - Hide Chapter

1

Chapter

Visible
Hidden

2 / 3 Hidden

JAN/7/10 1:00AM L1 LP

In stop mode, press [TOP MENU].

1 : 25 : 47

Title list will appear.

Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
+VR

Title List

JAN/ 7/10 1:00AM L1 LP
--:-- (2:00:00)
---/--/--

1

2

LP

3

Hidden
4

7

After this operation is completed,
press [RETURN] thrice to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible”, then press [ENTER]
at the step 6 above.
Data will be written onto the disc momentarily.

Empty

1/1

74

EN

E7PEAUD_DR430KU_EN.indd 74

2009/12/14 18:33:44

Introduction

EDITING DISCS
Deleting a Part of a Title

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

e.g.) VR mode DVD-RW playlist.
PL

Edit

1

SATELLITE
LINK

DISPLAY

AUDIO

Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Title Combining

Disc
Management

TIMER
PROG.

SPACE

SETUP

Use [K / L] to select “Scene Delete”,
then press [ENTER].

JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47

TOP MENU

Basic Setup

OPEN/
CLOSE

1
2

Follow the steps 1 to 3 in “Putting
Names on Titles” on page 71 to
display “Edit” menu.

Connections

You can delete a specific part of a title.
Even when parts of title are deleted from the playlist, the
original title will remain as it is.

MENU/LIST

Instructions continue on the next page.
Recording

ENTER
CLEAR

SKIP

RETURN

FWD

REV

SKIP

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

Playback

PAUSE

ZOOM

Editing

SE-R0265

Function Setup

Note
Others

• When a scene is deleted from an original, the playlist
related to the original will be deleted.
• You cannot select “Scene Delete” if the number of
chapter marks in the original or playlist is more than
999. (Depends on the content, there is a case that
you cannot select “Scene Delete” before the number
of chapter marks reaches 999.)
• The recordable disc space will not increase even after
deleting a part of a title on the playlist.

EN
E7PEAUD_DR430KU_EN.indd 75

75

2009/12/14 18:33:45

EDITING DISCS
Deleting a Part of a Title (cont’d)
Use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the start point,
then press [ENTER].

3

PL

4

Use [K / L] to select “Delete” then
press [ENTER].
PL

Edit - Scene Delete

1

Edit - Scene Delete

1

Start
End
Preview
Delete

Start
End
Preview
Delete

JAN/ 7/10 1:00AM L1 LP
1 : 47 : 00

JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47

Then use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] again to move to the end
point, and press [ENTER].
PL

5

Use [K / L] to select “Yes” then press
[ENTER].
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER].
PL

Edit - Scene Delete

1

Edit - Scene Delete

1

Are you sure?
Yes
No

Start
End
Preview
Delete

JAN/ 7/10 1:00AM L1 LP
1 : 50 : 00

The part of the title is deleted.

JAN/ 7/10 1:00AM L1 LP
1 : 45 : 00

The cursor will move to “Preview”.
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the
area selected for deletion is indicated in red.
You can check the preview by pressing [ENTER].
• Before and after 5 seconds of the deleted point
will be playback for preview.

6

Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

start point end point
Before
editing

Edited

76

EN

E7PEAUD_DR430KU_EN.indd 76

2009/12/14 18:33:46

Introduction

EDITING DISCS
Dividing a Title
Playlist

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

DISPLAY

TOP MENU

AUDIO

MENU/LIST

ENTER
RETURN

Use [K / L] to select “Title Dividing”,
then press [ENTER].
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW playlist
PL

SKIP

FWD

REV

Edit - Title Dividing

SKIP

1
PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

Recording

CLEAR

4
5
6

Use [SKIP H], [SKIP G], [REV E],
[FWD D], [PAUSE F] and [PLAY B]
to decide the point at which you will
divide the title.

Yes
No

Playback

JAN/ 7/10 1:00AM L1 LP
REPEAT REC MODE

REC

ZOOM

1 : 25 : 47

The title will be divided into two new titles.
Both title names are identical.

This operation may take
awhile to be completed.

In stop mode, press [TOP MENU].
• For VR mode DVD-RW, press [MENU/LIST] to
select “Playlist”.

Use [K / L/s / B] to select a desired
title, then press [ENTER].

For VR mode DVD-RW: Proceed to step 7.

7

Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

Others

Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
99 (-RW) or 49 (+RW), and the number of recording
chapters reaches the maximum of 999 (-RW) or 254
(+RW).

EN
E7PEAUD_DR430KU_EN.indd 77

Function Setup

1
2

90%

Editing

For DVD+RW: Data will be written onto the disc
momentarily.
Writing to Disc

Disc
Management

SETUP

Play From Start
Edit
Title Delete

TIMER
PROG.

SPACE

e.g.) VR mode DVD-RW playlist

Basic Setup

OPEN/
CLOSE

3

Use [K / L] to select “Edit”, then
press [ENTER].

Connections

You can divide one title into two new titles.

77

2009/12/14 18:33:48

EDITING DISCS
Combining Titles

1
2

Playlist

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Follow the steps 1 to 3 in “Dividing a
Title” on page 77 to display “Edit”
menu.
Use [K / L] to select “Title
Combining”, then press [ENTER].
PL

Edit

1

Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Title Combining

SATELLITE
LINK

JAN/ 7/10 1:00AM L1 LP
SPACE

SETUP

1 : 25 : 47

TIMER
PROG.

DISPLAY

TOP MENU

Title combining setting window will appear.
Selected title grays out, and the frame of the
next title becomes yellow.

AUDIO

MENU/LIST
PL

Edit - Title Combining

JAN/ 7/10 11:00PM L1 LP
11:00PM (0:30:00)
JAN/ 7/10

L1 LP

1

2

3

4

5

6

ENTER

1+
CLEAR

SKIP

RETURN

FWD

REV

SKIP

1/6
PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

Use [K / L/ { / B] to select another
title to combine, then press [ENTER].
Selection menu will appear.

ZOOM

4

Use [K / L] to select “Yes”, then press
[ENTER].
Combine selected titles?
Yes
No

SE-R0265

The two titles will combine into a single title.
PL

Title List

JAN/ 7/10 12:00AM L1 LP
12:00AM (2:30:00) JAN/ 7/10

L1 LP

1

2

3

4

5

6

1/6

Note
• You cannot select the same title twice and combine
it into a single title.
• If either one of the two original titles is deleted, the
combined new title is also deleted.

78

5

Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

EN

E7PEAUD_DR430KU_EN.indd 78

2009/12/14 18:33:49

Introduction

EDITING DISCS
Setting or Releasing the Title Protection
Original

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

TUV

SATELLITE
LINK
WXYZ

Use [K / L] to select “Protect”, then
press [ENTER].
ORG

Edit

1

Basic Setup

OPEN/
CLOSE

1
2

Connections

To prevent the accidental editing, or erasing of the titles,
you can protect them in “Edit” menu.
You can cancel the title protection feature after it is
applied.

Follow the steps 1 to 3 in “Putting
Names on Titles” on page 71 to
display “Edit” menu.

Scene Delete
Edit Title Name
Chapter Mark
Protect

JAN/ 7/10 1:00AM L1 LP

• If the title is protected,
the original list.

TIMER
PROG.

SPACE

SETUP

1 : 25 : 47

DISPLAY

AUDIO

MENU/LIST

TOP MENU

Confirm the indication
“OFF ON”. Press [ENTER] again.
• If the title is already protected, “ON OFF” will
appear. If you press [ENTER], the title will be
released from protection.

ENTER
ORG

CLEAR

Edit - Protect

RETURN

1
SKIP

FWD

REV

OFF

ON

SKIP

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

Playback

PAUSE

JAN/ 7/10 1:00AM L1 LP

REPEAT REC MODE

REC

Recording

3

icon will appear in

Disc
Management

PQRS

1 : 25 : 47

•

ZOOM

icon will appear on the title in the original
list.

4

Data will be written onto the disc momentarily.

Function Setup

This operation may take
awhile to be completed.

To protect a whole disc
(VR mode DVD-RW, DVD+RW/+R
only):

E7PEAUD_DR430KU_EN.indd 79

Others

Select “Disc Protect OFF ON” from the DVD
Menu, then select “Yes”.
Refer to “SETTING A DISC TO PROTECT” on
page 29.

EN

Editing

SE-R0265

Press [RETURN] and then [RETURN] or
[STOP C] to exit.

79

2009/12/14 18:33:51

EDITING DISCS
Setting or Clearing All Chapter Marks at Once

For titles in video mode DVD-RW, you can set or edit
chapter at every time interval. You can clear the chapter
mark too.
You can specify the interval of chapter marks for titles last
more than 5 minutes.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

1
2

Follow the steps 1 to 3 in “Putting
Names on Titles” on page 71 to
display “Edit” menu.
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Video

Edit

1

Edit Title Name
Chapter Mark

JAN/ 7/10 1:00AM L1 LP

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

AUDIO

MENU/LIST

TOP MENU

1 : 25 : 47

3

Use [K / L] to select the desired
interval, then press [ENTER].
Video

Edit - Chapter Mark

1

ENTER
CLEAR

OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes

RETURN

JAN/ 7/10 1:00AM L1 LP
1 : 25 : 47
SKIP

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

ZOOM

SE-R0265

4
5

Use [K / L] to select “Yes”, then press
[ENTER].
Chapter marks are added.
If you select “OFF” at step 3, all the chapter
marks are erased.

Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.

Note
• You cannot select a chapter mark interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter mark may be delayed depending on the
recording content.
• Maximum number of chapter for video mode DVD is
99 chapters per title.
• The interval for auto chapter may be up to two
minutes different from the time option you set.

80

EN

E7PEAUD_DR430KU_EN.indd 80

2009/12/14 18:33:53

Introduction

LIST OF THE DEFAULT SETTINGS
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
Playback

Items (highlight is the default)
Parental Lock
 page 84
Dynamic Range Control

ON
OFF

Compressing the range of sound volume.

PCM

48kHz
96kHz
PCM
Stream

Set whether the sound recorded in 96kHz will be
down sampled to 48kHz.

Dolby Digital

Disc Menu Language
 page 86

English
French
Spanish
Other

Set the language for disc menu language.

Audio Language
 page 86

Original
English
French
Spanish
Other

Set the language for audio.

Subtitle Language
 page 86

OFF
English
French
Spanish
Other

Set the language for subtitles.

Angle Icon
 page 86

ON
OFF

Set whether to display the angle icon or not.

Still Mode
 page 86

Auto
Field
Frame

Set the type of still image in pausing playback.

Set the language for OSD (on-screen display).

Set the idling time before the screen saver starts.

Set the brightness of the front panel display.

Editing

Set the viewing limitation according to US movie
ratings.

Function Setup

Set the viewing limitation according to US TV
program ratings.

Others

Set the viewing limitation according to Canadian
English language ratings.

EN
E7PEAUD_DR430KU_EN.indd 81

Playback

English
Français
Español
Screen Saver
OFF
 page 87
1 minute
5 minutes
10 minutes
15 minutes
FL Dimmer
Auto
 page 87
Bright
Dark
V-Chip
MPAA Rating
X
 page 88
NC-17
R
PG-13
PG
G
NR
TV Rating
TV-MA
 page 88
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Canadian English Rating 18+
 page 88
14+
PG
G
C8+
C
E

Recording

OSD Language
 page 87

Disc
Management

General Setting

ON
OFF

Set the type of sound signal which outputs from
the digital audio output jack.
Set whether DTS signal is output or not.

Basic Setup

DTS

Display

Contents
Set the parental level for DVD playback.

Connections

Audio Out
 page 85

OFF
level 8 [Adult] to
1 [Kid Safe]

81

2009/12/14 18:33:54

LIST OF THE DEFAULT SETTINGS
Setup
Display

Video

General Setting

Recording

Clock
HDMI

Items (highlight is the default)
V-Chip
Canadian French Rating 18ans+
 page 88
16ans+
13ans+
8ans+
G
E
Change Password
 page 88
Progressive
ON
 page 89
OFF
TV Aspect
4:3 Letter Box
 page 89
4:3 Pan & Scan
16:9 Wide
Select Video - L1(Rear)
Video In
 page 26
S-Video In
Auto Chapter
OFF
 page 34
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Recording Audio Select (XP)
PCM
 page 35
Dolby Digital
Auto
Disc Full
ON
Finalize
OFF
 page 30 End of Timer Rec
ON
OFF
Auto
Aspect Ratio (Video mode)
 page 35
4:3
16:9
Make Recording Compatible
ON
 page 34
OFF
Clock Setting  page 25
Format
RGB
 page 90
YCbCr
HDMI Audio
ON
 page 91
OFF
RGB Range
Normal
 page 91
Enhanced
HDMI CEC
ON
 page 91
OFF

Reset All
 page 92

Yes
No

Contents
Set the viewing limitation according to Canadian
French language ratings.

Change the password.
Set to the progressive scan mode (set to "ON") or
to the interlace scan mode (set to "OFF").
Set a picture size according to aspect ratio of your
TV.
Set the video input type for the external input.
Insert chapter marks at even time interval.

Set the recording audio type. (Only when the rec
mode is set to XP.)
Set the unit to finalize the disc automatically.

Set a aspect ratio for video mode recording.

Set to prohibit additional recording (OFF) or to
replace the title list after recording (ON).
Set the clock.
Set the color space for the HDMI output.
Set whether to output the HDMI audio signal or
not.
Set the black-white contrast level for HDMI RGB
output.
Set whether to utilize the HDMI-CEC function. The
HDMI-CEC function allows all components
connected via HDMI cable to act in conjunction
with this unit.
Set to the default setting.

Note
• Your change to each setting stays on even when the power is off.
• An item which is not currently available is grayed in the settings.

82

EN

E7PEAUD_DR430KU_EN.indd 82

2009/12/14 18:33:55

Introduction

GENERAL SETTING
Playback
Press [STOP C] if you are playing back a disc.

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

TIMER
PROG.

SPACE

SETUP

SATELLITE
LINK

DISPLAY

3

Use [K / L] to select a desired item,
then press [ENTER].

Use [K / L] to select “Playback”, then
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All

AUDIO

Disc
Management

TOP MENU

1
2

MENU/LIST

ENTER
CLEAR

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

1
2
3
4
5
6
7

Recording

SKIP

RETURN

Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode

ZOOM

When you finish with the setting,
press [SETUP] to exit.

Editing

4
5

Refer 1 to 7 on pages 84 to 86 and
set the selected item.

Playback

Submenu will appear.

SE-R0265

Basic Setup

INPUT
SELECT

Connections

OPEN/
CLOSE

Press [SETUP] and use [K / L] to
select “General Setting“, then press
[ENTER].

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 83

83

2009/12/14 18:33:55

GENERAL SETTING
Playback (cont’d)

1

Parental Lock (Default: OFF)

Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select the desired level, then press
[ENTER].

A

A password has not been set yet.

Use [K / L] to select “Yes”, then press [ENTER]. Use
[the Number buttons] to enter a new password except
for 4737, then press [ENTER].
Change Password?
Yes
No

Password Input

Yes

Your setting will be activated.

Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]

If a password has not been set yet, proceed to A .
If a password has been set already, proceed to B .

RATING EXPLANATIONS
• OFF : Parental Control is inactive; all discs can play.
• 8 [Adult]: DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC 17]: No one under 17 admitted.
• 6 [R]: Restricted; under 17 requires accompanying
parent or adult guardian.
• 5 [PG R]: Parental Guidance Recommended.
• 4 [PG13]: Unsuitable for children under 13.
• 3 [PG]: Parental Guidance suggested.
• 2 [G]: General Audience.
• 1 [Kid Safe]: Suitable for children.

B

A password has been set already.

• Use [the Number buttons] to enter the current
password.
Password Input

Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes” then press [ENTER]. Use [the Number buttons]
to enter a new password except for 4737, then press
[ENTER].

Change Password?
Yes
No

Password Input

Yes

Your setting will be activated.

Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4737 using
[the Number buttons] in password input window.
Password will be cleared and parental levels will be
set to “OFF”.

Note
• Parental lock function may not be available to some
discs.
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.

84

EN

E7PEAUD_DR430KU_EN.indd 84

2009/12/14 18:33:56

Introduction

GENERAL SETTING
Playback (cont’d)

2

C

Audio Out

Use [K / L] to select a setting, then press [ENTER].
Dolby Digital

Use [K / L] to select a desired item, then press [ENTER].

PCM
Stream

Audio Out

A

Dynamic Range Control
PCM
Dolby Digital
DTS

Dynamic Range Control (Default : ON)

Dynamic Range Control

D

Settings for DTS (Default : ON)

Disc
Management

Set to “ON” to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [ENTER].

Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.

Select a setting using [K / L], then press [ENTER].

ON
OFF

Basic Setup

A
B
C
D

Connections

Choose the appropriate audio setting for your external device.
It will only affect a disc playback.

Settings for Dolby Digital (Default : Stream)

DTS
ON
OFF

Note
ON
OFF

B

Settings for PCM (Default : 48kHz)

: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS®, set to “ON”.
: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS®, set to “OFF”.

Recording

• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.

Use [K / L] to select a setting, then press [ENTER].
Playback

PCM
48kHz
96kHz

48kHz

Editing

96kHz

: If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
: If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.

Function Setup

Note
When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.

Others

EN
E7PEAUD_DR430KU_EN.indd 85

85

2009/12/14 18:33:58

GENERAL SETTING
Playback (cont’d)

3

Disc Menu Language (Default : English)

Set the language for disc menu.
Use [K / L] to select a language, then press [ENTER].

6

Angle Icon (Default : ON)

Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [ENTER].

Disc Menu Language

Angle Icon

English
French
Spanish
Other

ON
OFF

Your setting will be activated.

4

7

Audio Language (Default : Original)

Set the audio language.
Use [K / L] to select a language, then press [ENTER].

Still Mode (Default : Auto)

Select “Auto” usually.
Use [K / L] to select a setting, then press [ENTER].
Still Mode
Auto
Field
Frame

Audio Language
Original
English
French
Spanish
Other

Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.

5

Subtitle Language (Default : OFF)

Set the subtitle language.
Use [K / L] to select a language, then press [ENTER].

Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.

Note
• Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC video).

Subtitle Language
OFF
English
French
Spanish
Other

Your setting will be activated.
If “Other” is selected for 3 to
using [the Number buttons].

5 , press 4-digit code

Code Input
-

-

-

-

Refer to the language code table on page 98.

Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] to erase numbers entered incorrectly.

86

EN

E7PEAUD_DR430KU_EN.indd 86

2009/12/14 18:34:00

Introduction

GENERAL SETTING
Display

1
INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

OSD Language
English
Français
Español
SATELLITE
LINK

DISPLAY

TOP MENU

AUDIO

MENU/LIST

2

Screen Saver (Default : 10 minutes)

Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [ENTER].

Disc
Management

Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes

ENTER
CLEAR

SKIP

RETURN

FWD

REV

Basic Setup

TIMER
PROG.

SPACE

SETUP

Set the language for the on-screen display.
Use [K / L] to select a language, then press [ENTER].

Connections

OPEN/
CLOSE

OSD Language (Default : English)

SKIP

Your setting will be activated.
PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

3
REPEAT REC MODE

REC

ZOOM

Recording

PAUSE

FL Dimmer (Default: Bright)

Set the front panel display brightness.
Use [K / L] to select a setting, then press [ENTER].
FL Dimmer

SE-R0265

Press [STOP C] if you are playing back a disc.

Use [K / L] to select a desired item,
then press [ENTER].
OSD Language
Screen Saver
FL Dimmer
V-Chip

V-Chip

With the V-chip system in this unit, you can set the
viewing limitation for the analog TV programs received
from the external tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view the program.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the
Number buttons] to set the access password, then
press [ENTER]. The number you entered will be stored
as the access password.
Password Input

Others

1
2
3
4

4

Function Setup

Use [K / L] to select “Display”, then
press [ENTER].

If “Auto” is selected, the display gets dark when the
power is off.
Editing

1
2
3

Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].

Playback

Auto
Bright
Dark

Submenu will appear.

4

Press [SETUP] to exit.

EN
E7PEAUD_DR430KU_EN.indd 87

87

2009/12/14 18:34:02

GENERAL SETTING
2) Use [K / L] to select a desired item, then press
[ENTER].

[Canadian English Rating]
Rating

V-Chip

A
B
C
D
E

A
B
C
D

MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Change Password

MPAA Rating
TV Rating

Category

18+

Adult audience only

14+

Unsuitable for ages under 14

higher

PG

Parental guidance suggested

G

General audience

C8+

For children over 8

C

For all children

E

Exempt program

lower

[Canadian French Rating]

Canadian English Rating

Rating

Canadian French Rating

You can set the viewing limitation according to
MPAA rating (US movie ratings),
TV Rating (US TV program ratings),
Canadian English Rating (Canadian English language ratings),
Canadian French Rating (Canadian French language ratings).
1) Use [K / L] to select the desired rating, then press
[ENTER] repeatedly to switch between view and
block. When it is blocked a key icon will appear.
e.g.) MPAA rating
MPAA Rating
X
NC-17
R
PG-13
PG
G
NR

Category

18ans+

Adult audience only

16ans+

Unsuitable for ages under 16

higher

13ans+

Unsuitable for ages under 13

8ans+

Unsuitable for ages under 8

G

General audience

E

Exempt program

lower

As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K / L/ { / B] to select
the desired rating or sub rating, then press [ENTER]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
TV Rating
FV

V

S L

D

TV-MA
TV-14
TV-PG
TV-G
TV-Y7

[MPAA Rating]

TV-Y
None

Rating

Category
higher

Sub Rating

Category

Rating

X

Mature audience only

NC-17

No one under 17 admitted

FV

Fantasy Violence

TV-Y7

Violence

R

Restricted; under 17 requires
accompanying parent or adult guardian

V
S

Sexual Situation

PG-13

Unsuitable for children under 13

L

Coarse Language

TV-PG
TV-14
TV-MA

PG

Parental guidance suggested

D

Suggestive Dialogue

TV-PG, TV-14

G

General audience

NR

No rating

lower

Note
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).

[TV Rating]
Rating

Category

TV-MA

Mature audience only

TV-14

Unsuitable for children under 14

TV-PG

Parental guidance suggested

TV-G

General audience

TV-Y7

Appropriate for all children 7 and older

TV-Y

Appropriate for all children

None

No rating

higher

E
lower

Change Password

Change the current password.
Use [the Number Buttons] to enter new access
password.

Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forgot the access password, enter 4737
using [the Number buttons] in password input
window. Password will be cleared.

88

EN

E7PEAUD_DR430KU_EN.indd 88

2009/12/14 18:34:04

Introduction

GENERAL SETTING
Video

1
INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

TUV

SATELLITE
LINK
WXYZ

ON
OFF

DISPLAY

TOP MENU

Basic Setup

SETUP

Progressive

TIMER
PROG.

SPACE

{ / B] to select “Yes“, then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.

AUDIO

MENU/LIST

Activate?

ENTER
CLEAR

RETURN

FWD

REV

SKIP

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

ZOOM

Use [K / L] to select “Video”, then
press [ENTER].

1 Progressive
2 TV Aspect
3 Select Video

Submenu will appear.

INPUT“ on page 26.

2

TV Aspect (Default: 16:9 Wide)

You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide

If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.

Others

4
5

Refer 1 to 2 on this page and set
the selected item.
• For 3 , refer to “SETTINGS FOR THE VIDEO

• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to pages 19-20.) If not, use the RCA video cable
and set the progressive scan to “OFF”.
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The “Progressive” setting will be “OFF”.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).

Function Setup

Use [K / L] to select a desired item,
then press [ENTER].

Note

Editing

1
2
3

Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].

K / L] to select “Yes“ within 15 seconds, then
press [ENTER].
Your setting will be activated.

Playback

Press [STOP C] if you are playing back a disc.

No

Recording

PAUSE

Yes

Disc
Management

NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.

SKIP

Connections

This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
1) Use [K / L] to select “ON“, then press [ENTER].

OPEN/
CLOSE

PQRS

Progressive (Default : OFF)

When you finish with the setting,
press [SETUP] to exit.

EN
E7PEAUD_DR430KU_EN.indd 89

89

2009/12/14 18:34:05

GENERAL SETTING
HDMI

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

SATELLITE
LINK

TIMER
PROG.

SPACE

SETUP

1
2

DISPLAY

TOP MENU

Use [K / L] to select “HDMI”, then
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All

AUDIO

MENU/LIST

• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.

ENTER
CLEAR

SKIP

Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

SE-R0265

3

Use [K / L] to select a desired item,
then press [ENTER].
1
2
3
4

Format
HDMI Audio
RGB Range
HDMI CEC

• You cannot select 1 through 3 when an
HDMI cable is not connected (the items will be
shown in grey).

ZOOM

4
1

When you finish with the setting,
press [SETUP] to exit.

Format (Default : RGB)

You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
RGB
YCbCr

90

EN

E7PEAUD_DR430KU_EN.indd 90

2009/12/14 18:34:07

HDMI (cont’d)

2

HDMI Audio (Default : ON)

ON
OFF

Your setting will be activated.

3

RGB Range (Default : Normal)

RGB Range

Your setting will be activated.

4

HDMI CEC (Default : OFF)

Note
• This function may not work properly depending on the TV
you are connecting.
• The available operation may differ depends on the TV’s
remote control you use.
• Other components must be compatible with HDMI-CEC in
order to use this function.

Playback

You can control all HDMI-CEC compatible components
connected via HDMI cable by simple button operations of
remote control of this unit.
In order to enable the function you need to set “HDMI
CEC” to “ON”.
Use [K / L] to select a setting, then press [ENTER].

Recording

Normal
Enhanced

Disc
Management

You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [ENTER].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.

Basic Setup

HDMI Audio

Connections

If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [ENTER].
• Set to “OFF” when the HDMI sound is not output.

Functions available for the HDMI-CEC
• One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically turned on and switch to appropriate input
channel.
Buttons for one touch play:
[TIMER PROG.], [SETUP], [INPUT SELECT ],
[PLAY B], [TOP MENU], [MENU/LIST]
• System information
Get & Set Menu Language: This unit recognizes the
OSD language set for the TV and automatically set the
same language as the player menu language (OSD
menu language) for this unit.
Power off: When you turn the TV off, this unit and all
equipment connected via HDMI will automatically turns
off except during recording on the unit.
Receiving operational signal from TV’s remote
control: You can operate this unit with TV’s remote
control. Check your TV owner’s manual for details.

Introduction

GENERAL SETTING

HDMI CEC

Editing

ON
OFF

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 91

91

2009/12/14 18:34:08

GENERAL SETTING
Reset All
Reset the setting to default.

OPEN/
CLOSE

INPUT
SELECT

HDMI

.@/:

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

DISPLAY

TOP MENU

General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All

AUDIO

MENU/LIST

ENTER
CLEAR

SKIP

3

Select “Yes” using [K / L] , then press
[ENTER].

SATELLITE
LINK

Use [K / L] to select “Reset All”, then
press [ENTER].

TIMER
PROG.

SPACE

SETUP

1
2

Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].

RETURN

FWD

REV

SKIP

PAUSE

PLAY

STOP

TIME SLIP

1.3x / 0.8x PLAY

INSTANT SKIP

REPEAT REC MODE

REC

Reset to factory default?
Yes
No

“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER].
Your setting will be initialized.

ZOOM

SE-R0265

Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- OSD language setting
- Parental lock setting
- V-chip setting
- Timer programs

92

EN

E7PEAUD_DR430KU_EN.indd 92

2009/12/14 18:34:10

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom

Picture
There is no picture.

Remedy
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).

• Check if all the connections are made correctly (page 18).

Playback picture is distorted.

• Keep the device which may cause electrical disturbances, such as a cellular
phone away.

Playback picture or TV program
from the device connected
through the unit is distorted.

• If the playback picture output from a DVD player, VCR or tuner goes through
the unit before reaching your TV, the copy-protection signal applied to some
programs could affect picture quality. Disconnect the playback device in
question and connect it directly to your TV.

Cannot record a TV program.

• This unit does not have a tuner to receive TV broadcasting.
• You must connect this unit to an external tuner to record TV programs
(page 18).

Sound
There is no sound.

Recording

• Clean the disc with a cleaning cloth.

TV program pictures are
distorted.

• This unit has no analog sound output when playing back the selected DTS
sound mode.

Sound is noisy.

• Clean the disc with a cleaning cloth.

• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 10).
• The region code on the DVD-video does not match the unit (page 10).
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back the
disc if it was not finalized.
• During the playback of 2 layered disc, picture may freeze for a moment when
the 1st layer switches to the 2nd layer. This is not a malfunction.

EN
E7PEAUD_DR430KU_EN.indd 93

Others

Playback image freezes for a
second.

• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• The remote control is not pointed at the infrared sensor window on the unit.

Function Setup

Playback
The disc does not play back.

Editing

• Change the setting menu for DTS® to ON.

No DTS sound from analog
output

Playback

• Clean the disc with a cleaning cloth.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• The input device setting on the amplifier is incorrect.
• The unit is in pause mode or in slow-motion playback mode.
• The unit is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL AUDIO OUTPUT
(COAXIAL) jack, check the setting in “Audio Out” (page 85).

No DTS sound on digital output.

Remote control
The remote control does not
function.

Disc
Management

Picture noise appears.

Basic Setup

• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check the connection to your TV (pages 18-21).
• Check if the progressive scan mode is set correctly according to your TV
(page 90).
• Switch the input selector on your TV (such as to “L1”) so that the signal from
the unit appears on the TV screen.

Connections

Power
The power does not turn on.

Introduction

TROUBLESHOOTING

93

2009/12/14 18:34:10

TROUBLESHOOTING
Symptom
Playback
The disc does not start playback
from the beginning.

Remedy
• Resume playback was activated (page 54). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.

The unit starts playing back the
disc automatically.

• The DVD-video features an auto playback function.

Some functions such as stop,
search, or slow-motion playback
cannot be performed.

• Depending on the disc, you may not be able to do some of the operations.
Refer to the instruction manual supplied with the disc.

The language for the sound track
cannot be changed.

• The titles does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound track.

The subtitle language cannot be
changed or turned off.

• Multilingual subtitle are not recorded on the DVD-video.

The angles cannot be changed.

• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc contains
a multi-angle portion. Actual change will be performed when the portion has
come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.

Recording / Timer recording / Editing
External input position (L1/L2)
• This unit is designed so. This is not a malfunction.
cannot be changed while
recording.
Nothing was recorded even
though you set the timer setting
correctly.

• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for more
than 30 seconds. Reset the clock (page 25).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.

Recording does not stop
immediately after you press
[STOP C].

• It will take a few seconds for the unit to input disc data before recording
stops.

Timer recording is not complete
or did not start from the
beginning.

• The timer setting overlapped with another setting that has priority (page 41).
• Disc space was not enough.
• “Make Recording Compatible“ is not set to “ON”, when recording onto
DVD+RW/+R that was recorded on other unit.

DV
DV signal cannot be input.

94

• Before connection, turn on the power supplies for both this unit and the DVC,
and make sure that these units are in stop mode.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other types of
signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC with
another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply for
the unit and re-connect the DVC.

The DVC cannot be operated
with this unit.

• Signal input or DVC operation from this unit may be disabled depending on
the type of DVC.
• If a DVC signal cannot be input, use an external input (L1 (Rear)/L2 (Front)) for
analog connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a mode
other than camera mode. In this case, switch to DVD control and execute the
normal recording procedure while operating the DVC.

Certain functions of the unit
cannot operate.

• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow playback
function is disabled.
• With L3 (DV-IN), the disc display menu does not appear unless disc playback
is executed.

DV audio signal cannot be
switched.

• For recording with the DVC, the recording audio signal can be set to 12 bits
or 16 bits. However, when 16-bit recording mode is selected, audio signal
cannot be switched. To record an audio signal, set it to 12 bits.

EN

E7PEAUD_DR430KU_EN.indd 94

2009/12/14 18:34:11

Symptom
HDMI
No image from HDMI connection.

• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
• If the unit is connected to the unauthorized display device with an HDMI
cable, the audio/video signal may not be output when playing back a
commercial DVD-video.
• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI conversion
cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.

• It may take a few seconds for the disc tray to open after you have recorded or
edited a disc. This is because the unit is adding disc data to the disc.

“Repairing” appears on the TV
screen.

• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing process
will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.

Repairing

In case you intend to cancel the
repairing process.

Playback

Do you want to cancel a repairing
process ? When selecting “Yes”,
the disc may not be usable.

• If you intend to cancel the repairing process, press [A OPEN/CLOSE]
on the front panel, then select “Yes” and press [ENTER]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.

Yes
No
Repairing

Cause

Region Error
— Please eject the disc. —
Playback is not authorized in your region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This program is not allowed to be recorded.
Recording Error
This program is not recordable in Video
mode.
Recording Error
This program is not recordable in +VR mode.

• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• The current selected parental level
prohibits playback.

• Format of the files in the connected
USB device are not supported.
• Incompatible USB device is connected.

• You are trying to record the copy
prohibited program.
• You are trying to record the copy-once
program onto the DVD-RW disc in video
mode.
• You are trying to record the copy-once
program.

• Insert the standardized disc which have
the marks on pages 9-10.
• Insert the disc with the labeled side facing up.
• Insert a compatible USB device with
supported file format. If this does not
solve the problem, use other type of
compatible USB device.
• Insert the DVD-video with region codes
1 or ALL.
• Check “Parental Lock” setting in
“Playback” menu (page 84).
• You cannot record copy prohibited
programs.
• Set “Format Mode” to “VR mode” (page
27).
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).

EN
E7PEAUD_DR430KU_EN.indd 95

Others

• Unplayable disc is inserted in the unit.
• The disc is upside down.

Solution

Function Setup

Disc Error
— Please eject the disc. —
Playback feature may not be available on this disc.
Unknown USB Device/File
— Please Remove the USB. —
Insert a compatible USB device.

Editing

Error message

Recording

The disc tray does not open when
you press [OPEN/CLOSE A].

Disc
Management

• When static electricity, etc., causes the unit to operate abnormally, unplug
the unit and then plug it in again.

Basic Setup

Others
The unit does not operate
properly.

Remedy

Connections

There is no sound or the sound is
distorted.

Introduction

TROUBLESHOOTING

95

2009/12/14 18:34:11

TROUBLESHOOTING
Error message
Recording Error
Cannot record on this disc.

Cause

Solution

• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• The disc is dirty.
• The disc is damaged.
• You are trying to record the copy-once
program onto the DVD-RW disc which
is not compatible with CPRM.

• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 9).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).

Recording Error
This disc is protected and not recordable.
Recording Error
Disc is full.
(No area for new recording)
Recording Error
You cannot record more than 99 titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more than 999 chapters on one disc.
(The maximum is 999)
Recording Error
You cannot record more than 49 titles on one disc.
(The maximum is 49)

• You are trying to record on to the protected
disc which is set in “DVD Menu” menu.
• You are trying to record onto the disc
which has no space for recording.

• Release the disc protect setting in “DVD
Menu” menu (page 29).
• Insert the recordable disc with enough
recording space.

• You are trying to record onto the DVD-RW/-R
on which the number of recording titles
comes up to the maximum (99).
• You are trying to record onto the VR mode
DVD-RW on which the number of recording
chapters comes up to the maximum (999).
• You are trying to record onto the DVD+RW/+R
on which the number of recording titles
comes up to the maximum (49).

• Delete unnecessary titles (pages 67-68).

Recording Error
You cannot record more than 254 chapters on one disc.
(The maximum is 254)

• You are trying to record onto the DVD+RW
on which the number of recording
chapters comes up to the maximum (254).

• Delete unnecessary chapter marks
(page 73).

Recording Error
You cannot record on this disc as Control
Information is full.

• This disc has no space to write the Control
Information when recording or deleting contents.
When editing has been repeatedly performed,
the control Information area may come up to be
full even the recording area has enough space.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Every time you insert a disc for recording,
the disc’s working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record full 49 titles.
• You are trying to record onto the disc
already finalized.
• You are trying to record onto the
unfinalized +VR mode discs recorded
on other unit.

• Delete unnecessary titles (pages 67-68).

Recording Error
This program is not allowed to be
recorded on this disc.

Recording Error
You cannot record on this disc as Power
Calibration Area is full.

Recording Error
This disc is already finalized.
Recording Error
The disc has no recording compatibility.
(Set “Make Recording Compatible” to
“ON” to convert the disc menu.)

• Delete unnecessary chapter marks
(page 73).
• Delete unnecessary titles (pages 67-68).

• Insert a new disc.

• Undo the finalizing for this disc
(page 32).
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 34).

* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line to locate an Authorized Service Center.

Frequently Asked Questions
– Can I record to CD-RW/-R?
– Can I play back DVD-video that is bought in another country?
– Can I connect the unit to my PC?
– Can I program a timer recording with cable/satellite box?

96

No, this unit records only DVD.
Possible when the region code of the disc is 1 and All.
No, you cannot control the unit by PC.
Yes, you can. Select “L1 (Rear)” or “L2 (Front)” as your
recording channel, and leave the cable/satellite box on
(pages 18, 26 and 38-41).

EN

E7PEAUD_DR430KU_EN.indd 96

2009/12/14 18:34:12

Function Setup
Others

EN
E7PEAUD_DR430KU_EN.indd 97

Editing

Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267

Playback

Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu

Recording

Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461

Disc
Management

Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian

Basic Setup

Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455

Connections

Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi

Introduction

LANGUAGE CODE

97

2009/12/14 18:34:12

GLOSSARY
Analog
g Audio

PCM (pulse
p
code modulation)

An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.

The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.

Aspect
p
Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).

Chapter
p
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.

Component
p
Video Output
p

Progressive
g
Scan (480p)
p
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 89 for instructions on
selective progressive scan mode.

Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).

Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).

Digital
g
Audio

Sampling
p g Frequency
q
y

An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.

Dolby
y Digital
g
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.

Region
g
Code

The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.

S-Video Output
p
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.

Title (DVD only)
y
A collection of chapters on DVD. See also “Chapter”.

DTS® (Digital
g
Theater System)
y

Track

DTS® is a multi channel surround sound system. By
connecting to DTS decoder you can enjoy dynamic and
realistic sound like movie theatre. DTS surround sound
technologies were developed by DTS, Inc.

Audio CD use tracks to divide up the content of a disc.
The DVD equivalent is called a chapter. See also “Chapter”.

Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players.

HDMI™ (high
g definition multimedia interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.

JPEG (joint
j
photographic
p
g p
experts
p
group)
g
p
JPEG is a method of compressing still image files. You can
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.

MP3 (MPEG audio layer
y 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.

98

Video mode
Video mode is the same recording format as used on
the DVD videos you purchase in local shops. You can
play back the discs recorded in this format in most DVD
players, however it offers only limited editing. You will
need to finalize discs recorded in video mode before
playing them back on other unit.

VR mode
A basic recording format for DVD-RW. VR mode offers
advanced editing, however it is playable only on VR
mode compatible unit. Finalization is recommended
before playing them back on other unit.

+VR mode
A recording format for DVD+RW/+R. +VR mode offers basic
editing, and it is playable on most DVD players. Finalization
is recommended before playing them back on other unit.

EN

E7PEAUD_DR430KU_EN.indd 98

2009/12/14 18:34:13

Introduction

SPECIFICATIONS
• This model complies with the below specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.

13.5 MHz
MPEG
48 kHz
Dolby Digital/LPCM (XP Recording mode only)
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Output 1 (rear)
1 Vp-p (75Ω)
RCA jack
Input 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN

Recording
Playback

USB 2.0
Output 1 (rear)
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks

Editing

HDMI jack
Input 1 (rear), 2 (front) L/R
2 V rms (input impedance: more than 22 kΩ)
RCA jacks
Output 1 (rear) L/R
2 V rms (output impedance: less than 1 kΩ)
RCA jacks
Output 1 (rear) COAXIAL
500 mVp-p (75Ω)
RCA jack
IEEE 1394
DV input jack (4 pin)

Function Setup
Others

Input / Output
Video input
Input level
Jacks
Video output
Output level
Jack
S-video input
Y (luminance) - Input level
C (color) - Input level
Jacks
S-video output
Y (luminance) - Output level
C (color) - Output level
Jack
USB input
TYPE A
Component video output
Output level
Jacks
HDMI output
Jack
Audio input
During audio input
Jacks
Audio output
During audio output
Jacks
Digital audio output
Output level
Jack
DV input
Jack

VR (video recording) format
Video format
+VR format
DVD-Rewritable/-Recordable, DVD+Rewritable/+Recordable

Disc
Management

Recording discs
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format

Basic Setup

Recording
Recording format

AC120 V, 60 Hz
20 W (standby: 2.6 W)
4.86 lbs ( 2.2 kg )
16.6” x 2.4” x 10.2” (420 x 59.0 x 259 mm)
41 °F to 104 °F (5 °C to 40 °C)
Less than 80% (no condensation)
NTSC TV standard

Connections

General
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV system

EN
E7PEAUD_DR430KU_EN.indd 99

99

2009/12/14 18:34:13

LIMITED WARRANTY
Limited United States Warranty
Digital Audio Video (“DAV”) Product - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT
AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA
AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED
IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

Limited Warranty
TACP warrants this DAV Product and its parts against defects in materials
or workmanship for a period of ninety (90) days after the date of original
retail purchase.
DURING THIS PERIOD, TACP WILL EXCHANGE A DEFECTIVE DAV
PRODUCT WITH A NEW OR REFURBISHED DAV PRODUCT WITHOUT
CHARGE TO YOU. DURING THE PERIOD THAT COMMENCES ON THE
DATE THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF ORIGINAL
RETAIL PURCHASE AND ENDS ON THE DATE THAT IS THREE HUNDRED
SIXTY FIVE (365) DAYS AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE, TACP WILL EXCHANGE A DEFECTIVE DAV PRODUCT
WITH A NEW OR REFURBISHED DAV PRODUCT FOR A FEE.
Rental Units
The warranty for DAV Product rental units begins on the date of the first
rental or thirty (30) days after the date of shipment to the rental firm,
whichever comes first.
Commercial Units
DAV Products sold and used for commercial purposes have a limited
warranty for all parts and labor, which warranty begins on the date of
original retail purchase and ends on the date that is ninety (90) days
thereafter.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this DAV Product.
Complete and mail the enclosed product registration card or register your
DAV Product on-line at www.tacp.toshiba.com/service as soon as possible.
By registering your DAV Product you will enable TACP to bring you new
products specifically designed to meet your needs and help us to contact
you in the unlikely event a safety notification is required under the U.S.
Consumer Product Safety Act. Failure to complete and return the product
registration card does not diminish your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must retain your bill of sale or provide other proof of purchase.
(2) All warranty servicing of this DAV Product must be made pursuant
to the TACP DAV Product Warranty Exchange Program.
(3) The warranties from TACP are effective only if the DAV Product is
purchased and operated in the Continental U.S.A. or Puerto Rico.

How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and checking
the section “TROUBLESHOOTING,” you find that service is needed:
(1) For instructions on how to obtain warranty service for your DAV Product
under the TACP DAV Product Warranty Exchange Program, contact
TACP’s Consumer Solutions Center toll free at 1-800-631-3811.
(2) You must include the original bill of sale (or a copy of the original bill
of sale) or other proof of purchase along with the entire DAV Product
when sending the DAV Product to the TACP Warranty Exchange Center
specified by TACP’s Consumer Solutions Center. You are responsible
for all inbound transportation and insurance charges for the DAV Product
to the TACP Warranty Exchange Center.
For additional information, visit TACP’s website: www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.
S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET
FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR
OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION,
OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY
USE, MISUSE OR INABILITY TO USE THIS DAV PRODUCT).
No person, agent, distributor, dealer, or company is authorized to change,
modify, or extend the terms of these warranties in any manner whatsoever.
The time within which an action must be commenced to enforce any
obligation of TACP arising under the warranty or under any statute or law
of the United States or any state thereof is hereby limited to ninety (90)
days from the date you discover, or should have discovered, the defect.
This limitation does not apply to implied warranties arising under state law.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO
STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, WHEN
AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.

(4) Labor service charges for set installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not covered
by this warranty. Reception problems caused by inadequate antenna
systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any DAV Product or parts that
have been lost or discarded by you or to damage to the DAV Product
or parts caused by fires, misuse, accident, Acts of God (such as
lightning or fluctuations in electric power), improper installation,
improper maintenance, or use in violation of instructions furnished by
TACP; use or malfunction through simultaneous use of this DAV Product
and connected equipment; or to units that have been modified or had
the serial number removed, altered, defaced, or rendered illegible.
(6) This warranty does not cover Product sold AS IS or WITH ALL
FAULTS.

100 EN
E7PEAUD_DR430KU_EN.indd 100

2009/12/14 18:34:13

/LPLWHG&DQDGLDQ:DUUDQW\
)RU7RVKLED%UDQG'LJLWDO$XGLR9LGHR3URGXFWV

Editing
Function Setup
Others

<2808675($'$1')2//2:$//6(783$1'86$*(
,16758&7,216,17+($33/,&$%/(86(5*8,'(6$1'25
0$18$/6,)<28)$,/72'2627+,6'$9352'8&70$<
127)81&7,213523(5/<$1'<280$<68))(5'$0$*(
7+,6:$55$17<:,//127&29(5$1<6(59,&(7+$7,6
5(48,5(',13$5725,1:+2/($6$5(68/72)$1<
)$,/85(72)2//2:7+(6(783$1'86$*(
,16758&7,2167+,6:$55$17<'2(6127$33/<$1'
6+$//%(92,'$1'81(1)25&($%/(,)7+('$9
352'8&7,623(1('6(59,&('255(3$,5('%<
3(5621627+(57+$17+26($87+25,=('%<7&/72
6(59,&(255(3$,57+('$9352'8&7

Playback


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Format                          : application/pdf
Title                           : Toshiba Dr430 Use And Care Manual
Subject                         : Toshiba Dr430 Use And Care Manual
Description                     : Toshiba Dr430 Use And Care Manual
Creator                         : Percy's of Worcester MA
Producer                        : Acrobat Distiller 9.0.0 (Windows); modified using iTextSharp 5.1.3 (c) 1T3XT BVBA
Keywords                        : Toshiba Dr430 Use And Care Manual
Create Date                     : 2009:12:14 18:34:54+09:00
Creator Tool                    : Adobe InDesign CS4_J (6.0)
Modify Date                     : 2012:01:27 12:40:54-05:00
Page Count                      : 103
Author                          : Percy's of Worcester MA
EXIF Metadata provided by EXIF.tools

Navigation menu