Toshiba G7 Operation Manual 51546 009 BOOK

2014-12-13

• Safety Alert Symbol
• Signal Words
• Special Symbols
• Equipment Warning Labels
• Qualified Personnel
• Equipment Inspection
• Handling and Storage
• Disposal
• Location and Ambient Requirements
• Mounting Requirements
• Conductor Routing and Grounding
• The Metal Of Conduit Is Not An Acceptable Ground.
• Power Connections
• Protection
• Personnel Protection
• System Setup Requirements
• CE Compliance Requirements
  • EMC Installation Guidelines
    • General EMC Guidelines for Consideration
    • CE Compliant Installation Guidelines
• Motor Characteristics
  • Motor Autotuning
  • Pulse Width Modulation Operation
  • Low Speed Operation
  • Overload Protection Adjustment
  • Operation Above 60 Hz
  • Power Factor Correction
  • Light Load Conditions
  • Motor/Load Combinations
  • Load-produced Negative Torque
  • Motor Braking
• ASD Characteristics
  • Over-current Protection
  • ASD Capacity
  • Using Vector Control
  • Local/Remote Operation
• Installation and Connections
  • Installation Notes
  • Mounting the ASD
  • Connecting the ASD
    • System Grounding
    • Power Connections
    • Lead Length Specifications
    • Startup and Test
  • I/O and Control
    • Terminal Descriptions
  • G7 ASD Control
    • CNU1/1A and CNU2/2A Pinout
    • CN3 Pinout‘
    • CN7 Pinout
    • I/O Circuit Configurations
  • Typical Connection Diagram
• Command Mode and Frequency Mode Control
  • Command Control (F003)
  • Frequency Control (F004)
    • Command and Frequency Control Selections
  • Override Operation
    • Command and Frequency-Control Override Hierarchy
    • Command Control Selections
    • Frequency Control Selections
• Electronic Operator Interface
  • EOI Features
  • EOI Operation
• System Operation
  • Initial Setup
  • Operation (Local)
  • Default Setting Changes
• Startup Wizard Requirements
  • Voltage and Frequency Rating of the Motor
  • Upper Limit Frequency
  • Lower Limit Frequency
  • Adjust Accel/Decel Automatically?
  • Volts per Hertz Setting
  • Motor Current Rating
  • Command Source
  • Frequency Reference Source
  • Wizard: Finish
• System Configuration and Menu Options
  • Root Menus
    • Frequency Command Mode
    • Monitor Mode
    • Program Mode
• Direct Access Parameter Information
  • Direct Access Parameters/Numbers
• Alarms, Trips, and Troubleshooting
  • Alarms and Trips
  • Alarms
  • User Notification Codes
  • Trips/Faults
    • Viewing Trip Information
      • Trip History
      • Trip Monitor From ASD
      • Trip Record at Monitor Screen
    • Clearing a Trip
• Enclosure Dimensions and Conduit Plate Information
  • Enclosure Dimensions/Weight
  • Conduit Plate Information
  • Conduit Extender Box (option)
    • Conduit Extender Box Installation
• EOI Remote Mounting
  • Remote EOI Required Hardware
  • EOI Installation Precautions
  • EOI Remote Mounting w/o the ASD-MTG-KIT
    • EOI Dimensions (mounting)
  • EOI Remote Mounting using the ASD-MTG-KIT
    • EOI ASD-MTG-KIT Dimensions (mounting)
• Current/Voltage Specifications
• Cable/Terminal Specifications
  • Dynamic Braking Resistor Wire/Cable Specifications
• Link Reactor Information
• G7 Optional Devices
• G7 ASD Spare Parts Listing