Toshiba Rd Xv48Dtkf Users Manual

RD-XV48DTKF to the manual bae90fc7-e48a-4187-a16f-7337236db325

2014-12-13

: Toshiba Toshiba-Rd-Xv48Dtkf-Users-Manual-132045 toshiba-rd-xv48dtkf-users-manual-132045 toshiba pdf

Open the PDF directly: View PDF PDF.
Page Count: 103

DownloadToshiba Toshiba-Rd-Xv48Dtkf-Users-Manual-  Toshiba-rd-xv48dtkf-users-manual
Open PDF In BrowserView PDF
COV_E3NG0FD_EN.fm Page 1 Tuesday, January 29, 2008 4:39 PM

Introduction
Basic Setup

RD-XV48DTKF

Connections

OWNER’S MANUAL

Recording

TOSHIBA HDD & DVD / Video Cassette Recorder RD-XV48DTKF

HDD & DVD / Video Cassette Recorder

Playback
Editing
Function Setup

DUBBING

REC

VCR DVD
HDD

VCR

SELECT
HDD

HDD/DVD
DVD

REC

HDD

DVD

DVD

HDD DVD

HDD & DVD VIDEO RECORDER RD-87DT

VHS Functions

PROGRAM

VCR

Others

Printed in China

1VMN24753 / E3NG0FD ★★★★★

© 2008 Toshiba Corporation

E3NG0FD_EN.book Page 2 Wednesday, January 30, 2008 10:37 AM

Introduction
Precautions
WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.

The important note is located on the rear of the cabinet.

Laser Safety

Caution

This unit employs a laser. Only a qualified service
personnel should remove the cover or attempt to
service this unit, due to the possibility of eye injury.

1. Do not attempt to open the cabinet. There are no
parts inside you can service. Refer all servicing to
qualified service personnel.
2. Slots and openings in the cabinet at the sides and
underneath are provided for ventilation. To ensure
reliable operation and to protect the unit from
overheating, these openings must not be blocked
or covered.
Avoid installation in enclosed spaces such as
bookcases unless suitable ventilation is provided.
3. Keep the unit away from radiators and other heat
sources.
4. Avoid use near strong magnetic fields.
5. Do not push objects of any kind into the unit
through the cabinet slots or openings as they
could touch electrically live parts or short circuit
parts resulting in a fire or electric shock.
6. Do not spill liquid on the unit. If liquid is spilled
and enters the unit, consult qualified service
personnel.
7. Do not stand the unit vertically. Use the unit in a
horizontal (flat) position only.
8. Before attempting to operate the unit, make sure
that the timer recording mode is off.
9. This product is in Stand-by mode when turned off
while the mains cable is connected.
10. Do not place any combustible objects on the
device (candles, etc.).
11. Before moving the unit, be sure to remove any
discs and unplug the mains cable from the AC
outlet.
12. Disconnect the mains plug to shut off when find
troubles or not in use.
13. The mains plug shall remain readily operable.
14. Read both manual instructions to ensure correct
and safe installation and interconnection of the
unit in multimedia systems.
15. Keep the distances 20 cm around apparatus of
ventilation openings.

CAUTION:

USE OF CONTROLS OR
ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN
HAZARDOUS RADIATION
EXPOSURE.

CAUTION:

VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED. DO NOT
STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK
MECHANISM.

Power Supply
The power supply is connected and the unit is live
when the mains cable is plugged into a 220 - 240 V~,
50 Hz AC outlet. To operate the unit, press
[B ON\STANDBY].
WARNING:

2

EN

LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.

E3NG0FD_EN.book Page 3 Wednesday, January 30, 2008 10:37 AM

Avoid the Hazards of Electrical Shock
and Fire
• Do not handle the mains cable with wet hands.
• Do not pull on the mains cable to disconnect it from
AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on the unit, unplug
the mains cable immediately and take the unit to an
authorised service centre for servicing.

Recording

For Customer Use:
Carefully read the Model No. and Serial No.
located at the back of the unit and enter the
information below. Retain this information for
future reference.
Model No. _____________________
Serial No. _____________________

For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position.
• Do not place anything directly on top of the unit.
• Do not place the unit directly on top of the TV.
• Shield the unit from direct sunlight and keep away
from sources of intense heat. Avoid dusty or humid
locations. Avoid locations with insufficient ventilation
for suitable heat dissipation. Do not block the
ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong
magnetic fields.

Basic Setup

Make your contribution to the environment!!!
• Exhausted batteries do not belong in
the dustbin.
• You can dispose of them at a collection
point for exhausted batteries or special
waste.
• Contact your council for details.

Installation Location

Connections

This product consists of materials
which can be recycled and reused if
disassembled by a specialised
company.
Batteries should never be thrown
away or incinerated but disposed of
in accordance with your local
regulations concerning chemical
wastes.

Introduction

A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local recycling
regulations.

Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
after heating a cold room, or under conditions of high
humidity. Do not use the unit for at least 2 hours to
allow the inside to dry.

Playback

About Copyright

Editing

Unauthorised copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorised by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorised
by Macrovision. Reverse engineering or disassembly
is prohibited.

Function Setup
VHS Functions
Others

EN

3

E3NG0FD_EN.book Page 4 Wednesday, January 30, 2008 10:37 AM

Notice for the Progressive Scan
Outputs
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of picture problems with 480 or 576
progressive scan output, it is recommended that the
user switch the connection to the ‘standard definition’
output. If there are questions regarding your TV set
compatibility with this 480p or 576p product, please
contact our customer service centre.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.

“Dolby® Digital Stereo Creator enables consumers
to create stereo DVD-Videos with stunning Dolby
Digital sound tracks at home. The technology,
when utilised instead of PCM recording, also
saves recordable disc space, allowing for higher
video resolution or extended recording time on
each DVD. DVDs mastered using Dolby Digital
Stereo Creator will play back on all DVD-Video
players.”
Note: This is true when the players are compatible
with actual recordable DVD discs.

Manufactured under license under
U.S. Patent #: 5,451,942 & other
U.S. and worldwide patents issued &
pending. DTS and DTS Digital Out
are registered trademarks and the
DTS logos and Symbol are
trademarks of DTS, Inc. © 19962007 DTS, Inc. All Right Reserved.

HDMI, the HDMI logo
and High-Definition
Multimedia Interface are
trademarks or registered
trademarks of HDMI
Licensing LLC.

DivX, DivX Certified, and
associated logos are
trademarks of DivX, Inc. and
are used under license.

DVB is a registered trademark of the
DVB project

4

EN

EU Conformity Statement

“This product is marked with “CE” and complies
therefore with the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC and the EMC Directive 2004/108/EC.”
Responsible for CE-marking is
TOSHIBA INFORMATION SYSTEMS (U.K.) LTD,
Toshiba Court, Weybridge Business Park,
Addlestone Road, Weybridge,
Surrey, KT15 2UL, United Kingdom

Maintenance
CLEANING THE UNIT
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use solutions containing
alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
If a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the centre out. Do not wipe in a
circular motion.
Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for
analogue records.
DISC HANDLING
Handle the discs so that fingerprints and dust do not
adhere to the disc surfaces.
Always store the disc in its protective case when it is
not in use.
HDD HANDLING
• HDD is a precision apparatus that is susceptible to
vibration, strong impact or dirt. Depending on the
installation environment or handling, the unit may
become partially damaged or in the worst case,
recording or replaying may not be available.
Especially while the HDD is in motion, do not subject
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
recording / replaying programme may be lost.
• HDD rotates at high speed when in operation. Be
sure that rotation has stopped and then move the
unit without subjecting it to strong impact or
vibration.
SERVICING
If the unit becomes inoperative, do not try to correct
the problem by yourself. There are no user
serviceable parts inside. Turn the unit off, unplug the
mains cable, and consult your dealer or an authorised
service centre.

E3NG0FD_EN.book Page 5 Wednesday, January 30, 2008 10:37 AM

Accessories Supplied
• Remote control with two R6 (AA) batteries
1

2

3

4

5

6

7

8

9

0

Connections

• RF cable

Basic Setup

AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV programme reception is clear. Dirt
accumulated on the video heads after a long period
of use, or the usage of rental or worn tapes can
cause this problem. If a streaky or snowy picture
appears during playback, the video heads in the unit
may need to be cleaned.
1 Please visit your local Audio / Video store and
purchase a good quality VHS Video Head Cleaner.
2 If a Video Head Cleaner does not solve the
problem, please consult your dealer or an
authorised service centre.

Introduction

CLEANING THE DISC LENS
If the unit does not perform correctly even though you
have referred to “Troubleshooting” and the relevant
sections in the Owner’s Manual, the laser optical
pickup unit may be dirty. Consult your dealer or an
authorised service centre for inspection and cleaning
of the laser optical pickup unit.

• Owner’s Manual

Owner's Manual

Recording

Note
• Remember to read the instructions along with the
video head cleaner before use.
• Clean video heads only when problems occur.
• Quick Setup Guide

Playback
Editing
Function Setup
VHS Functions
Others

EN

5

E3NG0FD_EN.book Page 6 Wednesday, January 30, 2008 10:37 AM

Table of Contents
Introduction ........................................... 2

Playback ............................................... 60

Precautions .......................................................... 2

Basic Playback ................................................... 60

Features ............................................................... 7

PBC Function for Video CDs .............................. 65

Guide to the Owner’s Manual............................... 8

Special Playback ................................................ 66

Functional Overview........................................... 11

Search ................................................................ 70

Installing Batteries in the Remote Control.......... 14
Switching HDD / DVD / VHS mode .................... 15

Repeat / Random / Programme Playback /
Slide Show ....................................................... 72

Guide to On-Screen Displays............................. 15

Selecting the Format of Audio and Video ........... 73

Front Panel Display Guide ................................. 19

Editing .................................................. 75
Connections ........................................ 20

Guide to a Title List............................................. 75

Connections ....................................................... 20

Editing Discs....................................................... 75
Deleting Selected Titles...................................... 77

Basic Setup.......................................... 24

Deleting All Titles in HDD ................................... 83

Initial Setting....................................................... 24
Channel Setting.................................................. 25

Function Setup .................................... 84

TV View Operation ............................................. 32

Playback ............................................................. 86

DVB Menu Setting.............................................. 34

Display................................................................ 89

Selecting the On-Screen Display (OSD)
Language......................................................... 35

Video .................................................................. 90

Setting the Clock ................................................ 36

HDMI .................................................................. 91

DivX® ................................................................. 91
Reset All ............................................................. 92

Recording ............................................ 37
Information on DVD Recording .......................... 37

VHS Functions ..................................... 93

Formatting a Disc ............................................... 39

Playback ............................................................. 93

Selecting the Sound Mode ................................. 41
Basic Recording ................................................. 43

Recording and One-touch Timer Recording
(OTR) ............................................................... 93

One-touch Timer Recording (OTR).................... 44

Search ................................................................ 94

Timer Recording................................................. 44

Other Operations ................................................ 95

Timer Recording (EPG)...................................... 48

Changing the Video Colour System ................... 95

Satellite Link....................................................... 49

Hi-Fi Stereo Sound System ................................ 95

Settings for External Equipment......................... 50

6

Information on DV Dubbing................................ 51

Others ................................................... 96

DVC to HDD / DVD Dubbing.............................. 52

Troubleshooting.................................................. 96

Information on Dubbing...................................... 53

Language Code ................................................ 101

Setting a Disc to Protect..................................... 58

Glossary ........................................................... 102

Finalising Discs .................................................. 59

Specifications ................................................... 103

EN

E3NG0FD_EN.book Page 7 Wednesday, January 30, 2008 10:37 AM

Features

With this unit, you can enjoy bi-directional dubbing
with HDD, DVD or VHS.

The following features are available with this unit.

Recording

DVD

VHS

Left channel stereo recording:
This unit can record the sound of the Left channel
monaural input as Left and Right channels
automatically (available only for AV3 jacks on the front
panel).
HDD

DVD

Automatic Playlist making:
The unit creates a Playlist automatically after
recording.
HDD

DVD

Automatic Title menu making: [E Page 59]
The unit creates Title menus automatically when
finalising discs.

HDD

DVD

Theatre surround sound: [E Page 23]
When the unit is connected to an amplifier or a
decoder compatible with Dolby Digital or DTS, you
can enjoy theatre-quality surround sound from discs
recorded with the surround sound system.
Quick search: [E Pages 70 - 71]
You can easily find the part you want to watch using
the search function. Search for a desired point on a
disc by title, chapter / track or time.
Variable skip: [E Page 67]
You can skip forward a certain time, which is specified
in “Playback” menu in advance, with one-touch during
playback.
Variable replay: [E Page 67]
You can skip back a certain time, which is specified in
“Playback” menu in advance, with one-touch during
playback.
Playback from Original or a Playlist:
You can play back titles using either the Original list or
a Playlist.
Virtual Surround System: [E Page 74]
You can enjoy stereophonic space through your
existing 2 channel stereo system.
HDD
Chasing Playback during Recording and
Simultaneous Playback and Recording:
[E Pages 69 - 70]
You can play the already recorded part of the current
recording or another title during recording.
Pausing a TV broadcast to resume later (Pause
TV): [E Pages 69 - 70]
With [TIME SLIP], you can virtually pause and
resume the live TV broadcast.
DVD
Playing back MP3 / JPEG / DivX® files:
[E Pages 61 - 64]
You can enjoy MP3 / JPEG / DivX® files which are
recorded on CD-RW/-R.
DivX® files can also be recorded on DVD-RW/-R and
DVD+RW/+R discs.

EN

Others

Automatic finalising: [E Page 59]
You can finalise discs automatically at the end of the
disc space if you set this in “Setup” menu.

Playback

VHS Functions

Alternate recording: [E Page 45]
If there is no recordable disc in the unit, if the disc
does not have enough space to complete the
recording, or if the material is “copy-once” programme
and prohibited to be recorded on a DVD in the unit,
the unit will detect it and automatically record to the
HDD even when DVD is selected as the recording
media. This feature is available only for timer
recording. Not available for one-touch timer recording.

VHS

Function Setup

VPS/PDC: [E Page 46]
This system assures that the TV programme you want
to record using timer recording will be recorded
exactly from beginning to end even if the actual
broadcasting time differs. This feature is only available
for analogue channels.

DVD

Editing

160 GB hard disc:
This unit is equipped with a 160GB hard disc which
allows you to record up to 267 hours (with SLP mode).

HDD

DV dubbing:
[E Pages 51 - 52] (HDD/DVD) or
[E Page 94] (VHS)
This function helps you to easily dub the contents of
the DVC (digital video camcorder) to HDD/DVD/VHS.

Playback

Automatic Chapter mark setting: [E Page 40]
Chapter marks will be added to recordings as you set
them in “Setup” menu before starting to record.

Auto recording mode dubbing: [E Page 53]
When dubbing, if you set the recording mode to
“Auto”, the recording mode will automatically be
adjusted so the titles will fit nicely in the remaining
space of the disc.

Recording

One-touch Timer Recording:
[E Page 44] (HDD/DVD) or [E Page 94] (VHS)
You can set your required recording time easily. Every
time [REC I] is pressed during recording, the
recording time will be increased by 30 minutes up to 8
hours. It will be turned off automatically when the
recording time you set is finished.

DVD

Basic Setup

Recording up to 36 programmes (HDD/DVD):
You can programme the unit to record up to 36
programmes, up to a month in advance. Daily or
weekly programme recordings are also possible.

HDD

High speed dubbing: [E Page 53]
This feature offers you the dubbing speed of 32 times
the SLP mode dubbing at the maximum.

Connections

This unit allows you to record on the HDD, a DVD-RW/
+RW (rewritable) and a DVD-R/+R (one-time write).
Also, this unit allows you to record to a videotape. You
can choose either one for your convenience.
HDD

Introduction

Dubbing

7

E3NG0FD_EN.book Page 8 Wednesday, January 30, 2008 10:37 AM

Others

VHS
Quick search: [E Pages 94 - 95]
You can easily find the part you want to watch using
the Index or Time search functions. An index mark will
be assigned at the beginning of each recording you
make. For Time search function, you can go to a
specific point on a tape by entering the exact amount
of time you want to skip.

Editing
HDD

DVD

Adding or Deleting Chapter Marks Manually:
[E Pages 78 - 79]
You can add or delete chapter marks manually.

HDD

DVD

Progressive scan system: [E Pages 21, 90]
Unlike conventional interlace scanning, the
progressive scan system provides less flickering and
images in higher resolution than that of traditional
television signals.
HDMI: [E Pages 21, 91 - 92]
(High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when
connecting this unit to a display device with an HDMIcompatible port.

Creating Titles to a Playlist: [E Page 81]
You can create a title to the Playlist.

Guide to the Owner’s Manual

Deleting Titles: [E Page 76]
You can delete titles which you do not need anymore.

Symbols Used in the Owner’s Manual

Deleting a Scene of a Title: [E Pages 82 - 83]
You can delete a specific scene of a title.

To show what recording mode or disc type applies to
each function, the following symbols appear at the
beginning of each operating item.

Editing title name: [E Pages 77 - 78]
You can name titles or change the title name.
Combining Titles: [E Page 81]
You can combine two titles into a single title.
Dividing Titles: [E Pages 80 - 81]
You can divide a title into two new titles.
Protecting titles: [E Page 80]
To avoid accidental editing or erasing of titles, the
protect function is useful when set to “ON” in the
Original list.

Symbol

Description

HDD
DVD-V
DVD-V
Video

DVD-R
DVD-RW
VD-RW
W
VR

Available to (internal) HDD
Available to DVD-Videos
Available to DVD-RW discs in Video
mode

DVD-RW

Available to DVD-RW discs in VR mode

DVD-R

Available to DVD-R discs in Video mode

DVD+R
DVD+RW
VD+RW
W

Available to DVD+RW discs

DVD+R
DVD+R

Available to DVD+R discs

CD

Available to Audio CDs

VCD

Available to Video CDs

MP3

Available to CD-RW/-R discs with MP3
files

JPEG

Available to CD-RW/-R discs with JPEG
files

DivX

Available to DVD-RW/-R, DVD+RW/+R
and CD-RW/-R discs with DivX® files

VHS

Available to VHS tapes
Use only cassettes marked VHS (

DVD
Adding or Deleting chapter marks at once
(Video mode DVD-RW only)
[E Page 79]
You can easily add chapter marks at every selected
time interval or delete all chapter marks at once for
easy editing.
Hiding chapters: [E Pages 79 - 80]
To keep others from playing back some chapters
without permission, you can hide chapters.

Compatibility
DVD
Playing back discs recorded in Video mode in any
regular DVD player: [E Page 59]
Discs recorded in Video mode can be played back in
regular DVD players, including computer DVD drives
compatible with DVD-Video playback. You will need to
finalise the discs recorded in Video mode to play back
in other DVD players.
Although DVD+RW / +R discs are playable in other
units without finalisation in most cases, it is
recommended to finalise in order to stabilise the
performance.
* DVD-Video Format (Video mode) is a new format for
recording on DVD-RW/-R discs that was approved
by the DVD Forum in 2000. Adoption of this format is
optional for manufactures of DVD playback devices
and there are DVD-Video players, DVD-ROM drives
and other DVD playback devices available that
cannot play back DVD-RW/-R discs recorded in the
DVD-Video Format.

8

EN

®

PAL SECAM

Symbols for Tuner Setting
The following is the description for the symbols for
tuner setting used in this manual.
ANALOG

: Settings only for the Analogue
mode

DVB

: Settings only for the DVB mode

)

E3NG0FD_EN.book Page 9 Wednesday, January 30, 2008 10:37 AM

Introduction

Medias for Recording / Playing
Disc Type

DVD-RW

DVD-R

DVD+RW

DVD+R

HDD

Logo

Can be formatted in VR or Video
mode
Video Mode

Icon

Maximum Record Time

VR

DVD-RW

DVD-RW

DVD-R

–

DVD+R
DVD+RW
VD+RW
W
480 min
(12 cm)
144 min
(8 cm)

DVD+R
DVD+R
480 min
(12 cm)
144 min
(8 cm)

HDD
267 hrs
(with SLP
mode)

Ver. 2.0
Ver. 2.0/4×
Ver. 2.0/8×
Ver. 2.0/16×

1×-4×

1×-16×

–

Playable on
most DVD
players.
Finalisation
necessary.
(Title menu
will be
created)

Playable on
DVD+RW
compatible
players.
Finalisation
recommended.
(Title menu will
be created)

Playable on
most DVD
players.
Finalisation
recommended.
(Title menu will
be created)

–

✔

✔

✔

Recording

Playable only on
VR mode
compatible unit.
Finalisation
recommended.

480 min
(12 cm)
144 min
(8 cm)

Basic Setup

480 min
(12 cm)
144 min
(8 cm)

Ver. 1.1, 1.2
Recordable/Playable
Ver. 1.1/2× CPRM compatible
Versions
Ver. 1.2/4× CPRM compatible
Playable on
most DVD
players.
Compatibility Finalisation
necessary.
(Title menu will
be created)

Automatically
formatted in
+VR mode

VR Mode

Video

480 min
(12 cm)
144 min
(8 cm)

Automatically Automatically
formatted in
formatted in
Video mode +VR mode

Connections

Format

Record TV
Programmes

✔

✔

Reuse by Deleting
the Current
Contents

✔

✔

Record 16:9 Size
Pictures

✔

✔

Record Copy-once
Programmes

✔

✔

✔

✔

✔

✔*

Create Chapters
at Fixed Intervals
(auto chapter)

✔

Scene Delete

✔

Edit Title Name

✔

✔

Combine Titles

✔

✔

Original

Playlist

Original

✔
✔

✔
✔

✔
✔

✔

✔

✔

✔

✔

✔

✔
✔

✔

✔

✔

✔

✔
✔

✔

✔

✔

✔

Hide Chapters
Delete a Title

✔

Playlist

✔
✔

Divide a Title

✔

✔

✔

✔
✔

✔
✔
✔

Create a Playlist
Protect a Title

✔: Available
* CPRM compatible disc only.

✔

VHS Functions

Deleting Selected
Titles

✔
✔

Function Setup

Create Chapters
Wherever You
Like (chapter
mark)

✔

Editing

Editing Features

Playback

Available Features

Recording Features

✔
✔

Gray: Not available

DVD players with

Others

Because of problems and errors that can occur during the creation of DVD and CD software and/or the
manufacture of DVD and CD discs, Toshiba cannot guarantee that product will play every feature of every DVD
bearing the DVD logo and/or every CD bearing the CD logo. As one of the creators of DVD technology, Toshiba
DVD players are manufactured using the highest standards of quality, and as a result, such incompatibilities are
rare.
are capable of playing DVD-RW recorded in VR mode.

EN

9

E3NG0FD_EN.book Page 10 Wednesday, January 30, 2008 10:37 AM

Discs for Playing
Disc Type

DVD-VIDEO

CD-DA

Video CD

CD-RW

CD-R

Logo

Icon

DVD-V

CD

VCD

CD

CD

Files for Playing
Type of
title

MP3

Icon

MP3

Media

CD-RW/-R

JPEG

DivX®

JPEG
CD-RW/-R

DivX

®

CD-RW/-R
DVD-RW/-R
DVD+RW/+R

is a trademark of DVD Format/Logo Licensing
Corporation.
®

• Official DivX Certified product
• Plays all versions of DivX® video (including DivX® 6)
with standard playback of DivX® media files.
• Discs containing the DivX® files with the DivX® GMC
(Global Motion Compensation) playback feature,
which is DivX® supplemental function, cannot be
played back on this unit.

Unplayable Discs
The following discs will not play back on this unit.
• CD-ROM
• Compact Disc-Interactive
(CD-I)
• Video Single Disc (VSD) • DVD-ROM
• DVD-audio
• Unfinalised disc
• DVD contains MP3, Windows Media™ Audio or
JPEG files
• DVD-RW/-R recorded in non compatible recording
format
• Blu-ray Disc
• HD DVD
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer
can be heard. The sound on the high-density super
audio CD layer cannot be heard.

Colour Systems
DVDs are recorded using different colour systems
throughout the world. The most common colour
system, used primarily in the U.K. and other EU
countries, is PAL.
This unit uses the PAL system. However, it is also
possible to play back DVDs using other colour
systems, such as NTSC.

Region Codes
This unit has been designed to play DVD
with region 2. DVD must be labelled for ALL
2
regions or for region 2 in order to play on the
unit. You cannot play back DVD that are
labelled for other regions. Look for the
symbols on the right on your DVD. If these
region symbols do not appear on your DVD,
you cannot play back the DVD in this unit.
The number inside the globe refers to region of the
world.
A DVD labelled for a specific region can only play
back on the unit with the same region code.

10

EN

Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim
DVD+R 8x, DVD+RW 4x, DVD-R 8x,
DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• Toshiba is not liable for any damage or loss
caused directly or indirectly by the malfunction of
this recorder, including, without limitation, any one
of the following:
• Failure to record contents intended to be
recorded by the consumer.
• Failure to edit contents as intended by the
consumer.
• When a DVD-RW/-R, DVD+RW/+R disc
created on this recorder is used (e.g.,
insertion, playback, recording or editing) in
another DVD player, recorder or personal
computer drive.
• When a DVD-RW/-R, DVD+RW/+R disc that
is used in the manner described in the
immediately preceding bullet point is used
again in this recorder.
• When a DVD-RW/-R, DVD+RW/+R disc that
was recorded in another DVD recorder, or in a
personal computer drive is used in this
recorder.
• Some functions may not work with personal
computer discs.
• Discs recorded in this recorder may not operate
as expected on other DVD players, recorders or
personal computer drives.

E3NG0FD_EN.book Page 11 Wednesday, January 30, 2008 10:37 AM

Introduction

Functional Overview
Front Panel
1

2

3 4*

5
Connections

6
7
8

Basic Setup

24 22* 20 18
16 14 12 10
23* 21* 19 17 15 13 11* 9
You can also turn on the unit by pressing these buttons.

1 B ON\STANDBY button

• Press to turn the unit on and off.
• Insert a tape here.

3 PROGRAM G \ H buttons
HDD/DVD: Press to change the channel up or
down.
VHS

4 A (OPEN\CLOSE) button* (DVD)
• Press to open or close the disc tray.

5 Disc tray
• Place a disc when the disc tray is opened.
• Connect the video output of an external device
here using a commercially available Video
cable.

7 AUDIO input jacks (AV3)

8 DV input jack (AV4)
• Use to connect the DV output of external device
with a DV cable.

9 REC indicators (HDD/DVD)
• Lights up during HDD/DVD recording.
• Press once to start a recording. Press
repeatedly to start one-touch timer recording.
Each press increases the recording time by 30
minutes up to 8 hours.

11 B (PLAY) button* (HDD/DVD)
• Press to start or resume playback.

12 C (STOP) button (HDD/DVD)
• Press to stop playback, recording or dubbing.

• Press to start One Touch Dubbing from HDD to
DVD.

15 DUBBING VCR M DVD button

• Press to start One Touch Dubbing from VCR to
DVD.

16 DUBBING indicator
• Lights up during dubbing

17 Display
• Shows information and messages. Refer to
“Front Panel Display Guide” on page 19.

18 Infrared sensor window
• Receive signals from your remote control so that
you can control the unit from a distance.

19 REC indicator (VHS)
• Lights up during VCR recording.

20 I REC button (VHS)
• Press once to start a recording. Press
repeatedly to start one-touch timer recording.
Each press increases the recording time by 30
minutes up to 8 hours.

21 B (PLAY) button* (VHS)
• Press to start playback. Press to turn on the unit
to start playback.

VHS Functions

10 I REC button (HDD/DVD)

14 DUBBING HDD M DVD button

Function Setup

• Connect the audio output of an external device
here using a commercially available Audio
(L / R) cable.

DVD : Press to activate the DVD. Lights up when
DVD is selected.

Editing

6 VIDEO input jack (AV3)

HDD: Press to activate the HDD. Lights up when
HDD is selected.

Playback

: Press to change the channel up or
down. Press to adjust the tracking
during playback or in slow motion of
the tape. While playback is in still
mode, you can adjust the vertically
blurred picture.

VHS : Press to activate the VCR. Lights up when
VCR is selected.

Recording

2 Cassette compartment

13 Device Select Buttons / Indicators

22 D (FWD) button* (VHS)
• Press to fast forward or fast search. Press to
turn on the unit to fast forward.

23 E (REV) button* (VHS)
• Press to rewind or rewind search.
• Press to turn on the unit to rewind.

24 A / C (EJECT\STOP) button (VHS)
Others

• Press to stop playback, recording or dubbing.
• Press to eject the videotape.

Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some
operations can be carried out using the buttons on the front panel.

EN

11

E3NG0FD_EN.book Page 12 Wednesday, January 30, 2008 10:37 AM

Rear Panel
HDMI OUT

1

2

3 4

1 Mains cable
• Connect to a standard AC outlet.

2 HDMI OUT jack (HDD/DVD)
• Connect to a display with an HDMI compatible
port. Use a commercially available HDMI cable.

3 DIGITAL AUDIO OUT (COAXIAL) jack
(HDD/DVD)
• Connect to an amplifier with a digital input jack
such as a Dolby Digital decoder, DTS decoder
or MPEG decoder. Use a commercially available
Coaxial cable.

4 AUDIO OUT (L\R) jacks (HDD/DVD)
• Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.

5

6

7 8

9

6 AV2 (DECODER) socket (HDD/DVD/VHS)
• Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.

7 AV1 (TV) socket (HDD/DVD/VHS)
• Connect to the Scart socket on your TV. Use a
commercially available Scart cable.

8 ANTENNA IN
• Connect to an antenna or a cable.

9 ANTENNA OUT
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system to output the signal
received at ANTENNA IN. Use the supplied RF
cable.

5 COMPONENT VIDEO OUT jacks
(HDD/DVD)
• Connect to the component video input jacks on
your TV. Use a commercially available
Component Video cable.

Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.

• This unit does not have an RF modulator.

12

EN

E3NG0FD_EN.book Page 13 Wednesday, January 30, 2008 10:37 AM

1
2

7
8

20
21

11 REV E button

22
23
24
26

27

28

12 PLAY B button
• Press to start or resume playback.

13 SKIP H button (HDD/DVD)

10
11

31

• During playback, press twice in quick
successions to skip to the previous chapter or
track.
• When playback is paused, press to play reverse
step by step.

Recording

9

29
30

14 VCR button

32

33
34
35
36
37
38
39

• Press to select the VCR output mode.

15 PAUSE F button
• Press to pause playback or recording.

16 TIME SLIP button (HDD)
• Press to virtually pause and resume the live TV
broadcast.

Playback

12
13
14
15
16
17
18
19

25

(HDD/DVD)
• During playback, press to fast reverse.
• When playback is paused, press to reverse
slowly.
(VHS)
• Press to rewind the videotape.
• Press to view the picture rapidly in reverse
during the playback mode.

Basic Setup

6

4
5

• Press to follow the DVB instruction displayed onscreen.
MODE (YELLOW) button (VHS)
• Press to change the video colour system.
SEARCH (BLUE) button (VHS)
• Press to call up the index or time search menu.

Connections

3

Introduction

10 RED/GREEN/YELLOW/BLUE button

Remote Control

17 DUBBING button
• During playback, press to start dubbing right
away.
• In stop mode, press to display “Dubbing” menu.

18 SUBTITLE button

1 OPEN\CLOSE A button (DVD/VHS)
• Press to open or close the disc tray.
• Press to remove the videotape from the unit.

2 INPUT SELECT F button
3 Number buttons
• Press to select channel numbers.
• Press to select a title / chapter / track on the
display.
• Press to enter values for settings in “Setup”
menu.
• Press to enter the characters in edit function.
• Press to display “Setup” menu in stop mode.

5 TEXT button
• Press to switch Teletext on or off.

6 VARIABLE REPLAY button (HDD/DVD)
• Replays by the amount of time set in advance.

7 TOP MENU button (HDD/DVD)
• Press to display the Title list.
• Press to move the cursor and determine items
or settings.

9 DISPLAY button
• Press to display the On-Screen Display.

20 HDMI button
• Press to set the HDMI connector’s video signal
output mode.

21 B ON/STANDBY button
• Press to turn on or off the unit.

22 PROG. G \ H buttons
• Press to change the channel up or down.

23 TIMER PROG. button
• Press to display the timer programme setting
menu.

24 INFO C button
• Press to display the DVB programme
information.

25 CLEAR button
(HDD/DVD)
• Press to clear the password once entered.
• Press to cancel the programming for a disc.
• Press to clear the selecting marker number in
the marker setup mode.
• Press to clear the programme once entered in
the CD programme playback mode.
(VHS)
• Press to reset the tape counter.

Others

8 Direction U \ D \ L \ P buttons

• During playback, press to playback in a slightly
faster/slower speed.

VHS Functions

4 SETUP button

19 1.3x\0.8x PLAY button (HDD/DVD)

Function Setup

• Press to select the DVB, analogue mode or
appropriate input.

Editing

• During playing back DVD or watching a DVB
channel which has subtitle information, press to
call up the Subtitle menu.

26 GUIDE button
• Press to call up the EPG list in DVB mode.
EN

13

E3NG0FD_EN.book Page 14 Wednesday, January 30, 2008 10:37 AM

27 VARIABLE SKIP button (HDD/DVD)
• Skips by the amount of time set in advance.

28 DISC MENU button (HDD/DVD)
• Press to display the Disc menu during playback.
• Press to change the Original and Playlist on the
TV screen.

29 ENTER button
• Press to acknowledge or approve a menu
selection.
• While watching a DVB channel, press to display
the “Quick select” menu.

Installing Batteries in the
Remote Control
Install two R6 (AA) batteries (supplied) into the
remote control, carefully match with the polarity
indicated inside the battery compartment.

1

2

3

30 RETURN button
• Press to return to the previously displayed menu
screen.

31 FWD D button
• When playback is paused, press to forward slowly.
(HDD/DVD)
• During playback, press to fast forward.
(VHS)
• Press to advance the videotape rapidly.
• Press to view the picture rapidly in forward
during playback.

32 STOP C button
• Press to stop playing back or recording.

33 SKIP G button (HDD/DVD)
• During playback, press to skip to the next
chapter or track.
• When playback is paused, press to advance
step by step.

34 HDD button
• Press to select the HDD output mode.

35 DVD button
• Press to select the DVD output mode.

36 REC I button
• Press once to start a recording.
• Press repeatedly to start a One-touch Timer
Recording.

Caution
• Incorrect use of batteries can result in hazards such
as leakage and bursting.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
• Make sure that the plus (+) and minus (–) ends of
each battery match the indications inside the battery
compartment.
• Remove batteries if the equipment will not be used
for a month or more.
• When disposing used batteries, please comply with
governmental regulations or the public instructions
for environmental protection that apply in your
country or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.

About the Remote Control
• Make sure there is no obstacle between the remote
control and the remote control sensor on the unit.
• Use within the operating range and angle as shown.

37 REC MODE button
• Press to switch the recording mode.
PROGRAM

VCR

DUBBING

REC

38 SAT.LINK button (HDD)

VCR DVD

VCR

SELECT
HDD

HDD/DVD
DVD

REC

HDD

DVD

HDD DVD

• Press to activate the Satellite Link Timer
Recording.

39 AUDIO D button
• For analogue channels when receiving a
bilingual broadcast, press to change the audio
out setting to “Main”, “Sub” or “Main/Sub”.
• Press to change the bilingual audio source of an
external equipment to “Main”, “Sub” or “Main/Sub”.
(Available only when the “External Input Audio” in
“Setup” menu is set to “Bilingual” in advance.)
• Press to select the sound mode for DVB channels.
(HDD/DVD)
• Press to display the audio menu during playback.
(VHS)
• During playback of Hi-Fi videotape, press to
change the audio out setting to “STEREO”,
“LEFT”, “RIGHT” and “MONO”.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly
with the operations using the remote control. Some
operations can be carried out using the buttons on
the front panel.

Note
• If you turn off this unit, [OPEN\CLOSE A] on the remote
control is not available. Be sure to use [A OPEN\CLOSE]
or [A / C EJECT/STOP] on the unit.

14

EN

7 m (30°)

7m

7 m (30°) Within
about 7 m

Remote control

• The maximum operable range as follows:
Line of sight:
approximately 7 m
Either side of centre: approximately 7 m within
30 degrees
• Remote control operation may become unreliable if
the remote control sensor of the unit is being
exposed by the strong sunlight or fluorescent light.
• Remote controls for different devices can interfere
with each other. Be careful when using remote
controls for other equipment located close to the
unit.
• Replace the batteries when the operating range of
the remote control reduces.

E3NG0FD_EN.book Page 15 Wednesday, January 30, 2008 10:37 AM

Device Select Indicators

PROGRAM

VCR

DUBBING

REC

VCR

SELECT
HDD

Guide to On-Screen Displays
DISPLAY Menu
HDD

With a disc inserted into the unit, press [DISPLAY] to
display the On-Screen Display. The menu shows
information about what is recorded on the disc.

5
6

HDD/DVD
DVD

VCR DVD

REC

HDD

DVD

HDD DVD

HDD

T

1/ 5 C

8
1 -RW VR ORG 2
901 TF1
3

1/ 5

0:01:00 / 1:23:45

DVD

Basic Setup

VCR

DVD

Connections

Because this unit is a combination of an HDD, a DVD
and a VHS recorder, you must select which
component you want to operate first.

Introduction

Switching HDD / DVD / VHS
mode

VCR indicator
HDD indicator

7

DVD indicator
VCR button

HDD

DVD
Press [DVD] on the remote control or the front panel.
(Verify that the DVD indicator is lit in green.)
VHS

This is an example screen for explanation. Displayed
items vary depending on the actual mode.

1 Indicates a disc type and format mode.
(DVD mode only)
2 Indicates a type of titles for HDD and VR
mode DVD-RW disc.
3 Indicates a channel number, station
name (analogue channel only) or
selected external input mode.
4 Indicates a media, recording mode and
possible recording time left.
5 Indicates the current title number/total
number of titles, the current chapter
number/total number of chapters, and
time lapse of the current title playback/
total duration of the title.
6 Each icon means:

Editing

Press [VCR] on the remote control or the front panel.
(Verify that the VCR indicator is lit in orange.)

1:53

Playback

Press [HDD] on the remote control or the front panel.
(Verify that the HDD indicator is lit in blue.)

DVD SP

Recording

HDD button
DVD button

4

: Search
: Audio
: Subtitle

Function Setup

: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround

VHS Functions

7 Indicates an operation status.
8 Indicates the component in use.
: HDD
: DVD

Note
• For some descriptions on this manual, only one disc
type is indicated as an example.

Others

EN

15

1_Introduction_EN.fm Page 16 Wednesday, January 30, 2008 10:52 AM

Press [DISPLAY] while the On-Screen Display is
displayed to display the following information.


VHS
Press [VCR] first.
Press [DISPLAY] to display the On Screen Display.

File name information

1
2
STEREO 3
12:00
AV2

File Name
My File

(only when a CD with MP3/JPEG/DivX® files
is in playback)
Title name information

7
6 SP

Title Name
My Title

0:00:00

5

STEREO

4

This is an example screen for explanation.
Displayed items are depending on the actual mode.

(only when DVD+RW/+R, VR mode
DVD-RW/-R, unfinalised Video mode
DVD-RW/-R disc or HDD is in playback)
<MP3 Tag Information>
(only when a CD with MP3 files is in playback)
Title name information
Title Name

1 Current time
2 Position number
3 Audio status of the receiving broadcast
or external equipment
4 Audio status of the currently playing
back videotape
5 Tape counter
6 Recording or playing back speed
7 Status of the current tape
While in the VHS mode, the On Screen Display of the
VHS mode is displayed.

Artist name information

INFO Menu

Artist Name

DVB
Press [INFO C] while viewing a DVB programme to
display the programme information.

Album name information
Album Name

1
<HDMI Information>
Video Info. :
Audio Info. :

1 480p
/ 2 YCbCr
3 Bitstream

(only for the images output through the HDMI
output)

1 Indicates the resolution of the HDMI
output image.
2 Indicates the HDMI video format.
3 Indicates the HDMI audio format.
• “- - -” will be displayed, when it does not have any
information.

16

EN

4
10:00 -11:00
11:00 -12:00

UKTV Gold

4

3
1
2
3
4

2

TV gossip show
Cooking show

Channel number
Channel name
Current programme information
Next programme information

The window will automatically exit after 3 seconds, or
press [INFO C] to exit.

E3NG0FD_EN.book Page 17 Wednesday, January 30, 2008 10:37 AM

To set up the OSD screen as you prefer.

Press [SETUP] to display the main menu. Then use
[U \ D] to select a menu and press [ENTER] to
display the sub menu. These menus provide entries to
all main functions of the unit.

3 Video:
To set up the video setting.

4 Recording:
To set up the unit to record to discs as you prefer.

5 Clock:

Setup

To set up the clock of the unit as you need.

General Setting

Connections

6 Channel:

Timer Programming

To adjust the channel setting of the unit as you prefer.

Title List

7 DivX:

DVD Menu

To set up the setting for the DivX® playback.

HDD Menu

8 HDMI:

Dubbing

To set up the HDMI connection setting.
You cannot select if the HDMI cable is not connected.

DVB Menu
CD Playback Mode

Basic Setup

1
2
3
4
5
6
7
8

Introduction

2 Display:

Main Menu

9 Reset All:
To reset the setting to the factory default.

1 General Setting:
To go to General Setting menu.

2 Timer Programming:

DVB Menu

To programme a timer recording.
To call up the title list.

4 DVD Menu:
To set up the DVD disc setting.

DVB Menu

1
2
3
4

Recording

3 Title List:

Adult Lock
Maturity Lock
Language
About

5 HDD Menu:
To set up the HDD setting.

6 Dubbing:
To dub the content of the HDD to DVD or vice versa.
To dub the content of the HDD to VHS or vice versa.
To dub the content of the DVD to VHS or vice versa.
“Dubbing” is available only when a recordable disc
or videotape is loaded.

Playback

•
•
•
•

1 Adult Lock:
To set up the Pincode for “Adult Lock”.

2 Maturity Lock:

7 DVB Menu:

To set the age restriction for DVB programmes.

To set up the DVB setting.

8 CD Playback Mode:

3 Language:
To set up the language for audio and subtitle.

Editing

To set up the CD playback setting.
• “CD Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 / JPEG /
DivX® files is inserted into the unit.

4 About:
To check the current DVB system software version of
this unit.

General Setting

Function Setup

General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Variable Skip / Replay
TV System

VHS Functions

1
2
3
4
5
6
7
8
9

1 Playback:
To set up the unit to play discs as you prefer.

Others

EN

17

E3NG0FD_EN.book Page 18 Wednesday, January 30, 2008 10:37 AM

9 Delete All Titles:
DVD Menu / CD Playback Mode / HDD Menu /
Dubbing
<DVD Menu menu>
DVD Menu

1
2
3
4

Format
Finalise
Disc Protect OFF ON
Delete All Playlists

<CD Playback Mode menu>
CD Playback Mode

5
6
7
8

Random Play
Programme Play
PBC (Video CD only)
Slide Show

Allows you to delete all titles, including the protected
titles in the HDD title list.

10 Delete All Unprotected Titles:
Allows you to delete all unprotected titles in the HDD
title list.

11 Delete All Playlists:
Allows you to delete all Playlists for HDD.

12 HDD A DVD:

Allows you to dub from HDD to DVD.

13 DVD A HDD:

Allows you to dub from DVD to HDD.

14 HDD A VCR:

Allows you to dub from HDD to VHS.

15 VCR A HDD:

Allows you to dub from VHS to HDD.

16 DVD A VCR:
Allows you to dub from DVD to VHS.

<HDD Menu menu>

17 VCR A DVD:

Allows you to dub from VHS to DVD.
HDD Menu

9
1
10
11

Delete All Titles
Delete All Unprotected Titles
Delete All Playlists

<Dubbing menu>
Dubbing

12
13
14
15
16
17

HDD

DVD

DVD

HDD

HDD

VCR

VCR

HDD

DVD

VCR

VCR

DVD

1 Format (DVD-RW, DVD+RW only):
Allows you to format the disc.

2 Finalise:
Allows you to finalise a disc containing recorded titles.

3 Disc Protect (VR mode DVD-RW,
DVD+RW/+R disc only):
Allows you to protect a disc from accidental editing or
recording.

4 Delete All Playlists (VR mode DVD-RW
disc only):
Allows you to delete all Playlists.

5 Random Play:
Allows you to activate the random playback feature.

6 Programme Play (Audio CD/Video CD
only):
Allows you to activate the programme playback
feature.

7 PBC (Video CD only):
Allows you to select images or information on the
menu screen by activating PBC (playback control)
function.

8 Slide Show (JPEG files only):
Allows you to select the display time of the slide show
mode.

18

EN

E3NG0FD_EN.book Page 19 Wednesday, January 30, 2008 10:37 AM

Introduction

Front Panel Display Guide
1

Connections

2

DB
3
1 Title / Track and Chapter number

: Appears when a videotape is in this unit.

Title / track number
Chapter number

Basic Setup

:
:

: Appears when a disc is in this unit.

2 Current status of the unit

DB :

Appears during dubbing.

3 Displays the following
•
•
•
•
•
•

Playing back time
Current title / chapter / track number
Recording time / remaining time
Clock
Channel number
One-touch Timer Recording (OTR) remaining
time
• Selected HDMI output mode

Recording
Playback

Appears when disc playback is paused.
Appears during step by step playback.
B:
Appears when playing back a disc.
F B: Appears during slow forward / reverse
playback.
: Appears when the timer programming or
One-touch Timer Recording (OTR) is set
and is operating.
Appears when the unit goes into the
Satellite Link standby mode.
Flashes when timer programming was not
executed because of some error.
I:
Appears when recording.
Flashes when recording being paused.
F:

Display Messages

Appears when
HDMI output mode
(576p) is selected.

The disc tray is
closing.

Appears when
HDMI output mode
(720p) is selected.

A disc is loading.

Appears when
HDMI output mode
(1080i) is selected.

Data is being
recorded on a disc.

Appears when
HDMI output mode
(1080p) is selected.

VHS Functions

The PBC function
of the Video CD is
activated.

Function Setup

Appears when
HDMI output mode
(480p) is selected.

Editing

The disc tray is
opening.

Appears when the
Satellite Link
Recording is in
standby.

Others

EN

19

E3NG0FD_EN.book Page 20 Wednesday, January 30, 2008 10:37 AM

Connections
To Aerial jack

Antenna
Cable
Signal

Audio/Video cable (not supplied)

3
3
Scart/RCA cable
(not supplied)

or

2

Scart adaptor
(not supplied)
Scart cable (not supplied)

RCA cable
(supplied)

HDMI OUT

1
RCA cable
(not supplied)

Connections
Connecting to a TV
Connect the unit to a TV after considering the
capabilities of your existing equipment.

Before installation, unplug your TV and this
unit.

1

Connect the antenna or cable to the
ANTENNA IN jack of this unit.

2

Connect the ANTENNA OUT jack of
this unit to the Aerial jack of your TV.
Use the supplied RF cable.

Using the Scart socket

3

Connect AV1 (TV) Scart socket of
this unit to the Scart socket of your
TV. Use a commercially available
Scart cable.

Using the COMPONENT VIDEO OUT jacks
and the AUDIO OUT (L\R) jacks
If your TV has Component Video input jacks, use a
Component Video cable and an Audio cable (to
connect the AUDIO OUT (L\R) jacks).
• Component connection provides the better quality
picture.

3

Connect the COMPONENT VIDEO
OUT jacks of this unit to the
Component Video input jacks of your
TV. Use a commercially available
Component video cable.

4

Connect the AUDIO OUT (L\R) jacks
of this unit to the analogue Audio
input jacks of your TV. Use a
commercially available Audio cable.
AUDIO IN

Component
Video IN
Y

Audio cable
(not supplied)

PB/CB

PR/CR

Component
Video Cable
(not supplied)

Note
• If your TV does not have a Scart socket, use a
commercially available Scart adaptor or Scart/RCA
cable to connect.
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the copy protection system.
• When changing the “Video Out” setting
(“SCART (RGB)”, “Component (Interlace)” or
“Component (Progressive)”), connect to the
corresponding jack on the TV. If the setting is
changed, for example, to “Component (Interlace)” or
“Component (Progressive)” while the scart cable is
connected to the TV, a distorted video signal may be
output.

20

EN

HDMI OUT

• After you have made the connections, set the “Video
Out” setting. (See page 90.)

E3NG0FD_EN.book Page 21 Wednesday, January 30, 2008 10:37 AM

Introduction

Connecting to a TV with an HDMI
Compatible Port
[HDMI CONNECTION]
A simple 1-cable connection with a device having an
HDMI (high-definition multimedia interface) connector
allows digital transfer of both digital video signals and
multi-channel audio signals. This is the best method
to connect this unit. It can minimise the deterioration
of image quality.
Use the HDMI cable (commercially available) for
connection.
Connect the HDMI output jack of this unit to the HDMI
input jack of TV.

Connections

Selecting Progressive Scan (576p/480p or
Interlaced 576i/480i) Playback
• If your TV is compatible with progressive scanning
(576p/480p), connect the TV to the COMPONENT
VIDEO OUT jacks of this unit and set “Video Out”
setting to “Component (Progressive)” in “Setup”
menu (See page 90.). Next, set your TV to the
progressive scan mode.
• If your TV is not compatible with progressive scan,
set “Video Out” setting to “Component (Interlace)”.
• Use a commercially available adaptor if the Video
input jacks of your TVs or monitors are the BNC
type.
• Only component and HDMI connections are
compatible with the Progressive Scan.

Basic Setup

HDMI cable (not supplied)
To HDMI
input jack

HDMI IN

Recording

HDMI OUT
this unit

TV

Playback

Selecting HDMI mode
Press [HDMI] to select the HDMI output mode. The
output mode changes as follows every time [HDMI] is
pressed. 576p (PAL) / 480p (NTSC) J 720p J 1080i
J 1080p (An HDMI mode that is not supported by the
display device will be skipped.)

Actual Output Modes by Media
Audio recording format
of the disc
Dolby
Digital

DTS
MPEG

DivX®

MP3
MP2

2channel PCM
Dolby Digital
2channel PCM
DTS
2channel PCM
MPEG
2channel PCM
Dolby Digital

Function Setup

Dolby
Digital

Actual output

Editing

LPCM
DVD-video

Dolby Digital /
DTS / MPEG
setting of this unit
PCM
Stream
PCM
Stream
ON
OFF
PCM
Stream
PCM
Stream
PCM
Stream
PCM
Stream

2channel PCM
2channel PCM
MPEG

VHS Functions

For Audio CD, Video CD and MP3 files, 2 channel
PCM will be output regardless of the “Dolby Digital”
setting.
If the connected device is not compatible with HDMI
BITSTREAM, audio will be output as PCM even if you
select “Stream” in “Dolby Digital” setting.
(See page 87.)

Others

EN

21

E3NG0FD_EN.book Page 22 Wednesday, January 30, 2008 10:37 AM

Copyright protection system
To play back the digital video images of a DVD via an
HDMI connection, it is necessary that both the player
and the display device (or an AV amplifier) support a
copyright protection system called HDCP (highbandwidth digital content protection system). HDCP is
copy protection technology that comprises data
encryption and authentication of the connected AV
device. This unit supports HDCP. Please read the
operating instructions of your display device (or AV
amplifier) for more information.
* HDMI: High Definition Multimedia Interface

Connecting to an External Equipment
This unit has three input terminals which can be
selected using [INPUT SELECT F] on the remote
control, AV1 or AV2 on the rear panel and AV3 on the
front panel. Be sure that all the units are switched off
before making connections.

Recording from a DVD player, Satellite Box
or other Audio-Video equipment with a Scart
output socket (AV2)

Note
• Because HDMI is an evolving technology, it is
possible that some devices with an HDMI input may
not operate properly with this unit.
• When using an HDCP-incompatible display device,
the image will not be viewed properly.
• Among the devices that support HDMI, some
devices can control other devices via the HDMI
connector; however, this unit cannot be controlled by
another device via the HDMI connector.
• The audio signals from the HDMI connector
(including the sampling frequency, the number of
channels and bit length) may be limited by the
device that is connected.
• Among the monitors that support HDMI, some do
not support audio output (for example, projectors).
In connections with device such as this unit, audio
signals are not output from the HDMI output
connector.
• When this unit’s HDMI connector is connected to a
DVI-D compatible monitor (HDCP compatible) with
an HDMI-DVI conversion cable, the signals are
output in digital RGB.
• If the connected equipment is not compatible with
HDMI BITSTREAM, DTS sound will not be output.
• When the power failure occurs, or when you unplug
the unit, some problems in the HDMI setting might
occur.
Please check and set the HDMI setting again.

AV output jack
(Scart)
Scart cable (not supplied)

AV2 (DECODER)

HDMI OUT

Note
• When you record a TV programme from a Satellite
Box, you must connect a Scart cable to AV2
(DECODER). (See page 49.)
• When AV2 is connected, the signal from the AV2 will
be output automatically. If you want to monitor the
signal from other input, you must press [DISPLAY]
first. Then, select the desired input to monitor with
[INPUT SELECT F].

Recording from a camcorder or other
Audio-Video equipment with no Scart output
socket (AV3)
Connect to AUDIO / VIDEO input jacks on the front
panel using an RCA Audio/Video cables.
When connecting a DV-camcorder, use DV input jack
of AV4 (Front).

AV3 (Front)

BBING

VCR

SELECT
HDD

HDD/DVD
DVD

R DVD

REC

HDD

DVD

D DVD

Video cable

Audio cable

(not supplied)

(not supplied)

DV cable
(4-pin)
(not supplied)

VIDEO OUT AUDIO OUT

DV OUT

Note
• When connecting an external device of monaural
output to this unit, use AUDIO L jack of AV3.

22

EN

E3NG0FD_EN.book Page 23 Wednesday, January 30, 2008 10:37 AM

Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.

Digital audio
input jacks
COAXIAL

After You Have Completed
Connections
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the
Owner’s Manual of your TV.

Note

Connections

Coaxial cable
(not supplied)

Introduction

Digital Audio for Better Sound Quality

• Connect this unit directly to the TV. If the AV cables
are connected to a VHS, pictures may be distorted
due to the effects of the copy protection system.

COAXIAL

HDMI OUT

Basic Setup

The connections illustrated above are
optional for better sound.

Recording

1

For clear digital sound quality, use
the DIGITAL AUDIO OUT (COAXIAL)
jack to connect your digital audio
equipment.

Playback

If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.

Connecting a Dolby Digital™ decoder, DTS
decoder or MPEG decoder

Editing

• Connecting multi-channel Dolby Digital decoder
allows you to enjoy the Multi-channel Dolby Digital
surround system as well as DTS decoder, Multichannel surround system.
• After connecting to a Dolby Digital decoder, set
“Dolby Digital” to “Stream” in “Audio Out” menu.
(See pages 86 - 87.)
• After connecting to a DTS decoder, set “DTS” to
“ON” in “Audio Out” menu. (See pages 86 - 87.)
• After connecting to a MPEG decoder, set “MPEG” to
“Stream” in “Audio Out” menu. (See pages 86 - 87.)

Function Setup

Connecting to an MD deck or DAT deck

VHS Functions

• The audio source recorded in Dolby Digital Multichannel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
• If not connected to a Dolby Digital decoder, set
“Dolby Digital” to “PCM” in “Audio Out” menu.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
• Set “Dolby Digital” and “MPEG” to “PCM” and set
“DTS” to “OFF” in “Audio Out” menu for connecting
to an MD or DAT deck.
• You can use AUDIO OUT (L\R) jacks for the
connection of your audio system.

Others

EN

23

E3NG0FD_EN.book Page 24 Wednesday, January 30, 2008 10:37 AM

Basic Setup
Initial Setting
When you turn on this unit for the first time, you need
to follow these steps.

1
2

Press [B ON\STANDBY].
Turn the TV on. Select the input to
which the unit is connected.
“Réglage initial” will automatically appear.

3

Select your desired language for the
OSD using [U \ D]. Then press
[ENTER] to go to the next step.

Digital tuning:
Only the DVB channels receivable in your area
are automatically scanned and memorised.
Digital & Analog tuning:
Both analogue and DVB channels receivable in
your area are scanned and memorised
automatically.
Analog tuning:
Only the analogue channels receivable in your
area are automatically scanned and memorised.
• If no channel has been memorised, the antenna
confirmation display will appear. Press [ENTER] to
start auto scanning again or press [RETURN] to
cancel the initial settings.

6

Réglage initial

After finishing channel setting,
“Clock Setting” will appear. Then
press [ENTER].
Clock Setting

01 / 01 / 2008 (TUE)
0 : 00

Langue Aff. écran
Français
English
Español
Deutsch
Italiano

4

Select your desired country to the
channel plan using [U \ D]. Then
press [ENTER] to go to the next step.
Initial Setting

Country
France
Spain
Germany
Italy
Switzerland

5

Select your desired channel preset
type using [U \ D]. Then press
[ENTER].
Initial Setting

Auto Tuning
Make sure the antenna is
connected to “ANTENNA IN” jack.
Digital tuning
Digital & Analog tuning
Analog tuning

The unit will start getting channels available in
your area.

24

EN

• If you want to adjust the clock, follow to step 5
on page 36 in “Manual Clock Setting”.

7

Press [ENTER] to exit.

E3NG0FD_EN.book Page 25 Wednesday, January 30, 2008 10:37 AM

Introduction

Channel Setting

Auto Tuning (ANALOG)
ANALOG

Auto Tuning (DVB & ANALOG)

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Channel” using [U \ D],
then press [ENTER].

3

Select “ANALOG Channel Setup”
using [U \ D], then press [ENTER].

4

Select “Auto Tuning” using [U \ D],
then press [ENTER].

Programme the tuner to scan both analogue and DVB
channels you can receive in your area.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].
General Setting menu will appear.

2

Select “Channel” using [U \ D],
then press [ENTER].

3

Select “Auto Tuning (DVB &
ANALOG)” using [U \ D], then press
[ENTER].

The unit will start storing channels available in
your area.
ANALOG Channel Setup

Wait for several minutes to finish channel storing.
• Analogue channels will be stored in channel
901-999 after it is scanned by this unit.

General Setting

Country
Auto Tuning (DVB & ANALOG)
DVB Channel Setup
ANALOG Channel Setup

Press [SETUP] to exit.
You can select only the channels memorised in
this unit by using [PROG. G \ H].

Note

You can select only the channels memorised in
this unit by using [PROG. G \ H].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.

Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when this unit is in
any recording mode (normal recording, One-touch
Timer Recording or timer recording).
• Sorting of TV channels from 901 to 906 will be
performed automatically as follows.
901: TF1
902: F2
903: F3
904: CANAL+ 905: F5/ARTE 906: M6

Function Setup

To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.

Press [SETUP] to exit.

Editing

4

5

Playback

Wait for several minutes to finish channel storing.
• Analogue channels will be stored in channel
901-999 after it is scanned by this unit.

Recording

Auto Tuning
Manual Tuning
Move

The unit will start storing channels available in
your area.

Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

Basic Setup

Programme the tuner to scan only the analogue
channels you can receive in your area.

Connections

You can retune this unit or edit the channel setting
with following methods.

VHS Functions

• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when this unit is in
any recording mode (normal recording, One-touch
Timer Recording or timer recording).

Others

EN

25

E3NG0FD_EN.book Page 26 Wednesday, January 30, 2008 10:37 AM

[L (SECAM-L)]

Manual Tuning (ANALOG)

Channel Plan
CH Indication
TV Channel
01 – 10
F1 - F10
21 – 69
E21 – E69
74 – 86
B–Q
90 – 106
S4 – S20
121 – 141
S21 – S41

ANALOG
You can preset an analogue channel manually and
individually.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Channel” using [U \ D],
then press [ENTER].

3

Select “ANALOG Channel Setup”
using [U \ D], then press [ENTER].

4

Select “Manual Tuning” using
[U \ D], then press [ENTER].

5

Select “Position” using [U \ D], then
press [P].

[BG (PAL-B/G)]
Channel Plan
CH Indication
TV Channel
02 – 12
E2 - E12
13 – 20
A – H (only ITALY)
21 – 69
E21 – E69
74 – 78
X, Y, Z, Z+1, Z+2
80 – 99, 100
S1 – S20, GAP
121 – 141
S21 – S41
This unit can receive the Hyper and Oscar
frequency bands.
• If “Skip” is set to “ON”, select “Skip” using
[U \ D], then press [P]. Select “OFF” using
[U \ D], then press [L].
• If you want to decode scrambled signals, select
“Decoder” using [U \ D], then press [P]. Select
“ON” using [U \ D], then press [L].
• To store another channel, repeat steps 5 to 10.

Manual Tuning

Position

901

System

L

Channel

1

Decoder

OFF

Skip

ON

11 Press [SETUP] to exit.
Skip a Preset Channel
ANALOG

6

7
8

Select the position number you want
to use using [the Number buttons] or
[U \ D], then press [L].

1

• You can select position number 901-999.
• With [the Number buttons], you only need to
enter the last 2-digit numbers.

Follow steps 1 to 4 in “Manual Tuning
(ANALOG)” on this page.

2

Select “System” using [U \ D], then
press [P].

Select “Position” using [U \ D], then
press [P].

3

Select the position number you want
to skip using [the Number buttons]
or [U \ D], then press [L].

4

Select “Skip” using [U \ D], then
press [P].

5

Select “ON” using [U \ D], then
press [L].

Select “L” or “BG” using [U \ D],
then press [L].
• If your system is SECAM-L, select “L”.
• If your system is PAL-B/G, select “BG”.

9

Select “Channel” using [U \ D],
then press [P].

10 Press [U \ D] to start scanning.
• The tuner will begin to search up or down
automatically. When a channel is found, the unit
will stop searching and the picture will appear
on the TV screen.
• You can select a desired channel number using
[the Number buttons]. Refer to the following
Channel Plan table and press the three digits to
select the channel number.
(To select channel 4, press [0] first and then
press [0] and [4]. Or press [4] and then “– – 4”
appears and wait for 2 seconds.)
• If this is the channel you want, press [L].

26

EN

You can set the unit to skip channels. You can no
longer receive or watch when you access channels
using [PROG. G \ H].

• To skip another channel, repeat steps 2 to 5.

6

Press [SETUP] to exit.

E3NG0FD_EN.book Page 27 Wednesday, January 30, 2008 10:37 AM

Auto Tuning (DVB)

ANALOG
You can replace two channels.

1

DVB
You can programme the tuner to scan only the DVB
channels that you can receive in your area.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

Select “Channel” using [U \ D],
then press [ENTER].

2

3

Select “ANALOG Channel Setup”
using [U \ D], then press [ENTER].

Select “Channel” using [U \ D],
then press [ENTER].

4

3

Select “Move” using [U \ D], then
press [ENTER].

Select “DVB Channel Setup” using
[U \ D], then press [ENTER].

5

4

Select the position number of which
you want to change the channel
using [U \ D], then press [ENTER].

Select “Auto Tuning” using [U \ D],
then press [ENTER].
The unit will start storing channels available in
your area.

You cannot select a position number where
“– – –” appears next to the number, because
“Skip” is set to “ON” for that position number.

DVB Channel Setup
Edit Channels
Auto Tuning
Manual Tuning
Signal Information

Move the channel to another position
number using [U \ D], then press
[ENTER].

The tuner scans and memorises all the active
DVB channels (TV / Radio) in your area.
Channel search

• To move another channel, repeat steps 5 to 6.

Press [SETUP] to exit.

S. No. TV channel
1
2
3
4

ITV1
ITV2
Channel
E4

Channel48 UHF

Progress

Playback

7

Recording

6

Basic Setup

2

Connections

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

Introduction

Move

S. No. Radio channel
700
701
702
703

BBC Radio 1
BBC Radio 2
Magic Radio
Classic FM

690000kHz/8M
60%

Editing

• Press [ENTER] after Auto Tuning is completed,
then the lowest memorised DVB channel
appears on the screen.

5

Press [SETUP] to exit.
Function Setup

You can use [PROG. G \ H] for the memorised
DVB channels.

Note

VHS Functions

• If you press [RETURN] during the scanning, the
screen will return to the previous displayed
menu, and Auto Tuning will be cancelled.
• If you press [SETUP] during the scanning, this
operation will stop and the lowest memorised
DVB channel will appear on the TV screen.

Others

EN

27

E3NG0FD_EN.book Page 28 Wednesday, January 30, 2008 10:37 AM

Manual Tuning (DVB)

Select a Channel

DVB
You can preset a DVB channel manually and
individually.

1

Follow steps 1 to 3 in “Auto Tuning
(DVB)” on page 27.

2

Select “Manual Tuning” using
[U \ D], then press [ENTER].

3

Select your desired position number
using [U \ D], then press [ENTER].
Manual Tuning (DVB)

Channel

Auto

You can select memorised channels by using
[PROG. G \ H].
You can select a channel using [PROG. G \ H] or
directly enter the channel using
[the Number buttons].
Notes on using [the Number buttons]:
• For one or two-digit number channels, the channels
will be identified 2 seconds after you press the
channel number, or right after you press [ENTER].
For example, if you want to select channel 6, press
[6] and wait for 2 seconds or press [ENTER]. You
can only select channels 1 to 999.
• Analogue channels will be stored in channel 901999 and DVB channels will be stored in channel 1900 after it is scanned by this unit.
To switch DVB, analogue and external input (AV1/
AV2/AV3/DV(AV4)) mode.
You can switch between DVB, analogue and external
input (AV1/AV2/AV3/DV(AV4)) mode by pressing
[INPUT SELECT F] repeatedly. The mode changes
as follows:
DVB mode „ Analogue mode „ AV1 „ AV2 „ AV3 „ DV(AV4)

• The tuner will begin to search up or down
automatically. When a DVB channel is found,
the unit will stop searching.
• When “Auto” is selected the unit will search for
the channels which have not been stored in
channels memory.

4

Press [SETUP] to activate the setting.

Country Setting
DVB
You can set the DVB channels to Channel Plan of
each country.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Channel” using [U \ D],
then press [ENTER].

3

Select “Country” using [U \ D], then
press [ENTER].

4

Select your desired country using
[U \ D], then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

5
28

EN

Country
Auto Tuning (DVB & ANALOG)
Country
DVB Channel Setup
France
ANALOG Channel Setup
Spain
Germany
Italy
Switzerland

Press [SETUP] to exit.

• You can also switch the mode by using
[PROG. G \ H].
• You can select any DVB channels using
[the Number buttons] when you are in analogue or
external input (AV1/AV2/AV3/DV(AV4)) mode.
• You can select any analogue channels using
[the Number buttons] when you are in DVB mode.

E3NG0FD_EN.book Page 29 Wednesday, January 30, 2008 10:37 AM

Edit Channels (DVB)
DVB

DVB
With “Quick select” menu, you can select your
favourite DVB channel quickly. Refer to “Edit Group
Lists” on page 30.

Press [ENTER] while watching a DVB
channel.

With “Edit Channels” menu, you can see all the
memorised DVB channels and sort them into the
group lists (“Quick select”) or set the viewer limitation
(“Adult Lock”), etc.

1

Follow steps 1 to 3 in “Auto Tuning
(DVB)” on page 27.

2

Select “Edit Channels” using
[U \ D], then press [ENTER].

• “Quick select” menu will appear.
Quick select
All
S. No.

Press [L \ P] to select your favourite
group list. (“All”, “Group1” “Group8”)

• “Edit Channels” menu will appear..
Edit Channels
S. No.

1
2

Press [RETURN] to exit.

3

Channel name
Moving picture 576i
ITV1
ITV2
ITV3
Channel
E4

Fav Skip Lock Del
1

4

4
4

Crystal Palac

562000kHz/8M

3

Channel numbers
Channel names
Channel information
Channel setting

Playback

4

Select the DVB channel you want to
watch using [U \ D], then press
[ENTER].

France

1
2
3
4

• “All” shows a list of all the memorised DVB
channels.
• If the favourite group does not have any
channels, the group will be skipped.

3

1
2
3
4
5
6

Recording

2

Channel name
Moving picture 576i
ITV1
ITV2
ITV3
Channel
E4
More 4

Basic Setup

1
2
3
4
5
6
7

Connections

1

Introduction

Quick Select

Press [SETUP] to exit.

Note
• Press [INFO C] to display the using guide. You can
see each explanation of the buttons which can be
used in “Edit Channels” menu. Press [RETURN] to
return to “Edit Channels” menu.

Editing
Function Setup
VHS Functions
Others

EN

29

E3NG0FD_EN.book Page 30 Wednesday, January 30, 2008 10:37 AM

Edit Group Lists

Adult Lock
DVB

DVB
You can sort each DVB channel into 8 different
favourite group lists (“Group1” -“Group8”). With “Quick
select” menu, you can select your favourite DVB
channel quickly. Refer to “Quick Select” on page 29.

1

Follow steps 1 to 2 in “Edit Channels
(DVB)” on page 29.

2

Select the DVB channel you want to
add to the favourite group list using
[U \ D], then select the number of
the favourite group list you want to
add to using [the Number buttons]
([1] - [8]).

You can set the unit to limit the access to the DVB
channels.

1

Follow steps 1 to 2 in “Edit Channels
(DVB)” on page 29.

2

Select the DVB channel you want to
limit the access to using [U \ D],
then press [YELLOW].
Edit Channels
S. No.
1
2
3
4
5
6

Edit Channels
S. No.
1
2
3
4
5
6

Channel name
Moving picture 576i
ITV1
ITV2
ITV3
Channel
E4

France

1

France

4
4

Crystal Palac

562000kHz/8M

You can set the unit to skip the unwanted DVB
channels when you use [PROG. G \ H].

1

Follow steps 1 to 2 in “Edit Channels
(DVB)” on page 29.

2

Select the DVB channel you want to
skip using [U \ D], then press
[GREEN].

3

You can delete the DVB channels from the memorised
DVB channels.

1

Follow steps 1 to 2 in “Edit Channels
(DVB)” on page 29.

2

Select the DVB channel you want to
delete using [U \ D], then press
[BLUE].
Edit Channels
S. No.
1
2
3
4
5
6

Fav Skip Lock Del
1

Crystal Palac

30

EN

ITV1
ITV2
ITV3
Channel
E4

Fav Skip Lock Del
1

4
4

Crystal Palac

562000kHz/8M

562000kHz/8M

• “ ” will appear.
• Press [GREEN] to cancel. “

3

Channel name
Moving picture 576i

4
4
France

France

” will disappear.

Press [SETUP] to exit.
• Once you turn off the unit, Pincode will be
required to view the locked channels.
• To set the Pincode, refer to “Pincode Setting for
Adult Lock” on page 34.

Edit Channels

ITV1
ITV2
ITV3
Channel
E4

562000kHz/8M

DVB

DVB

1
2
3
4
5
6

Crystal Palac

Delete Channels

Skip Channels

Channel name
Moving picture 576i

4
4

• “ ” will appear.
• Press [YELLOW] to cancel. “

Press [SETUP] to exit.

S. No.

ITV1
ITV2
ITV3
Channel
E4

Fav Skip Lock Del

Fav Skip Lock Del

• The number you selected will appear.
• Press [0] to cancel from the favourite group list.

3

Channel name
Moving picture 576i

Press [SETUP] to exit.

• “ ” will appear.
• Press [BLUE] to cancel. “
” will disappear.

3

” will disappear.

Press [SETUP] to exit.
• The channel has been deleted from the “Edit
Channels” menu.

E3NG0FD_EN.book Page 31 Wednesday, January 30, 2008 10:37 AM

Signal Information

DVB

DVB
You can check the detailed information of the current
DVB channel.

1

Follow steps 1 to 2 in “Edit Channels
(DVB)” on page 29.

1

Follow steps 1 to 3 in “Auto Tuning
(DVB)” on page 27.

2

Select the DVB channel of which you
want to change the position using
[U \ D], then press [ENTER].

2

Select “Signal Information” using
[U \ D], then press [ENTER].
• “Signal Information” display will appear.

Select the channel you want to
replace with using [U \ D], then
press [ENTER].

15 CITV
DVB-T 8M

France
474000KHz

A.PID

0274

• The channel will be replaced.

Frequency
Bandwidth

8M

V.PID

0273

Press [SETUP] to exit.

P.PID

0512

12:00-15:00

CITV 576i

15:00-18:00

CITV 576i

Basic Setup

4

Connections

You can change the order of the DVB channels when
you use [PROG. G \ H].

3

Introduction

Channel Move

Edit Channel Names
Signal
Quality

DVB

1

Follow steps 1 to 2 in“Edit Channels
(DVB)” on page 29.

2

Select the DVB channel of which you
want to edit the name to using
[U \ D], press [RED].

Press [SETUP] to exit.
• “Signal Information” is not available for analogue
channel and external input (AV1/AV2/AV3/
DV(AV4)).
• “Signal Information” is also not available while
the Pincode input field for locked DVB channel is
displayed.

Playback

• Name editing display will appear.

3

90%

Recording

You can edit the DVB channel names as you want.

80%

Edit Channels

3

Editing

Fav Skip Lock Del
S. No.
N
Channel Name
1
Moving picture 576i
1
@S# ABC DEF
2
ITV1
1
2
3
3 GHI
ITV2 JKL MNO
4
4ITV3 5
6
5 PQRS
Channel
4
TUV WXYZ
7E4
8
9
6
4
SPACE
0
France
Palace
562000kHz/8M
a 0-9 A->aCrystal
e
INS DEL

Function Setup

Edit the name using [the Number
buttons].

4
5

VHS Functions

• Press [the Number buttons] repeatedly until
the desired letter appears.
• Press [L \ P] to move the cursor left or right.
• Press [RED] to select alphabet or numbers.
• Press [GREEN] to select capital or small letters.
• Press [YELLOW] to move the letter on the
cursor to the right.
• Press [BLUE] to delete the letter on the cursor,
and move the cursor to the left.

After completion, press [ENTER].
Press [SETUP] to exit.

Note
• You can enter up to 19 letters.

Others

EN

31

E3NG0FD_EN.book Page 32 Wednesday, January 30, 2008 10:37 AM

TV View Operation
The following operations are available while viewing
TV channels through this unit’s tuner.

Selecting the TV Aspect Ratio
You can select the TV aspect ratio to match the format
of the programme you are playing back with the unit
and that of your TV screen (4:3 standard or 16:9 wide
screen TV).

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Video” using [U \ D], then
press [ENTER].

3

Select “TV Aspect” using [U \ D],
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

4

TV Aspect
Video Out

ANALOG
You can switch between TV audio modes by pressing
[AUDIO D]. Each mode is indicated on the TV
screen.
• During reception of analogue bilingual broadcasts
Audio output

Display on
the TV screen

Main

Main audio from both speakers

Main

Sub

Sub audio from both speakers

Sub

Main /
Sub

• Main audio from the left speaker
• Sub audio from the right speaker

Main/Sub

Mode

• If the programme does not have more than one
sound track, [AUDIO D] is not effective.

Digital Teletext Reception
DVB
Many broadcasters provide a DVB Teletext service in
the form of a dedicated Teletext channel. This Digital
service includes high quality text and graphics along
with advanced navigation options.

1

Press [TEXT] to display Teletext
screen.
• Teletext for the TV channel you have selected
will be displayed.

Select the desired option using
[U \ D], then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide

5

Selecting the Audio Mode

Press [SETUP] to exit.

Hint
If you have a standard TV:
• Select “4:3 Letter Box” for a full width picture
with black bars at the top and bottom.
• Select “4:3 Pan & Scan” for a full height picture
with both sides trimmed.
If you have a wide screen TV:
• Select “16:9 Wide”.

2

Use [RED] / [GREEN] / [YELLOW] /
[BLUE] to follow the instructions on
screen.

3

Press [TEXT] to switch the Teletext
display off.

Note
• [TEXT] is not available during recording.

EPG (Electronic Programme Guide)
Electronic programme guide (EPG) gives you a list of
the DVB programmes and detailed information about
the programmes. To call up EPG while viewing DVB/
analogue channel or external input (AV1/AV2/AV3/
DV(AV4)), press [GUIDE]. You can also call up EPG
by following steps.

1

In stop mode, press [SETUP]. Select
“Timer Programming” using [U \ D],
then press [ENTER].

2

Select “EPG” using [U \ D], then
press [ENTER].
• Select the TV programme using
[U \ D \ L \ P], then press [SETUP] or
[GUIDE] to exit.
• From the EPG screen, you can also set the
timer recording. Select the TV programme using
[U \ D \ L \ P], then press [ENTER] or
[BLUE] to go to “Timer Programming” menu.
Refer to “Timer Recording (EPG)” on page 48.

32

EN

E3NG0FD_EN.book Page 33 Wednesday, January 30, 2008 10:37 AM

1

Daily mode

2

Date 18/01/2008
Time 10:30:56

4

Subtitle
18/01/2008 (Friday)
10:25-11:10
12:00-13:00
13:00-13:30
13:30-14:35
19:30-20:00
20:00-21:00

ITV1
ITV2
ITV3
Channel
E4
More 4

news
show
musical
variety show
news
drama

5

1

Weekly

Extended

• If the programme has no subtitle information,
“No information” will appear.

Timer

EPG menu mode
Date / Time
Date
Channel number / name
Channel programme
Programme you select now

Subtitle
On
English

2

Recording

• Press [GUIDE] to exit.
• Press [RED] or [GREEN] to change “Daily mode” or
“Weekly mode”.
• Press [YELLOW] to see more detailed information
of the selected programme.
• Press [INFO C] to display the using guide.

Select “On” using [L \ P].
• If you do not want to display the subtitle, select
“Off” using [L \ P].

Multiaudio

3

DVB
Many DVB channels transmit Multi audio information
along with their DVB channels. You can select the
desired audio mode and audio language.

While viewing a DVB programme,
press [AUDIO].
Multiaudio
Stereo

3

Select your desired audio language
using [U \ D].

Press [ENTER] to activate the
settings.

Note
• If the programme is changed, the subtitle language
will be switched back to the default language you set
in the “DVB Menu”. Refer to “Language Setting” on
pages 34 to 35. If the default subtitle language is not
available on the new programme, no subtitle will be
displayed.

VHS Functions

Select “Stereo”, “Right” or “Left”
using [L \ P].

4

Function Setup

2

• The available subtitle language varies
depending on the DVB programmes.

Editing

English

Select your desired subtitle
language using [U \ D].
Playback

1

While viewing a DVB programme,
press [SUBTITLE].

Basic Setup

1
2
3
4
5
6

Many DVB channels transmit Subtitle information
along with their DVB channels. You can retrieve and
display it on the TV screen.

6

10:25-11:10 The Montel

Daily

DVB

3

Connections

1
2
3
4
5
6

Introduction

e.g.) Daily mode

• The available audio language varies depending
on the DVB programmes.

4

Press [ENTER] to activate the
settings.

Note

Others

• If the programme is changed, the audio language
will be switched back to the default language you set
in the “DVB Menu”. Refer to “Language Setting” on
pages 34 to 35.

EN

33

E3NG0FD_EN.book Page 34 Wednesday, January 30, 2008 10:37 AM

DVB Menu Setting

Maturity Lock
DVB

You can make settings of the digital tuner from the
DVB Menu.

According to the age rating signal which comes with
each DVB programme, you can lock each programme.

Pincode Setting for Adult Lock

1

Follow steps 1 to 2 in “Pincode
Setting for Adult Lock” on this page.

2

Select “Maturity Lock” using
[U \ D], then press [ENTER].

DVB
You can set “Adult Lock” to “ON” or “OFF” and also
change Pincode.

1
2
3

• If “Adult Lock” is set to “ON”, enter the Pincode
to proceed to next step.

In stop mode, press [SETUP].
Select “DVB Menu” using [U \ D],
then press [ENTER].

3

Select “Adult Lock” using [U \ D],
then press [ENTER].

• Select “OFF” to disable “Maturity Lock”.
DVB Menu
Adult Lock
Maturity Lock
Language
About

DVB Menu
Adult Lock
Maturity Lock
Language
About

Maturity Lock

4
4

Select “ON” or “OFF” using [U \ D],
then press [ENTER].

5

To set “Adult Lock” to “ON”:
1) Enter your desired Pincode using
[the Number buttons], then press [ENTER].
2) For confirmation, enter the Pincode again
using [the Number buttons] then press
[ENTER].

To set “Adult Lock” to “OFF”:
Enter the Pincode using [the Number buttons].
• While entering the Pincode, use [L] or [CLEAR]
to clear the numbers once entered.

6

Press [SETUP] to exit.

Note
• Once “Adult Lock” has been set to “ON”, Pincode
will be required in order to view the locked channels
or make the timer recording of them, and when you
try to execute the “Auto Tuning” for DVB or “Edit
Channels”.
• If you forget the Pincode, press [4], [7], [3], [7] to
cancel the Pincode.

Select the desired rating using
[U \ D], then press [ENTER].

Press [SETUP] to exit.
• Once “Maturity Lock” has been set, Pincode will
be required in order to view the programme that
exceeds the age restriction.
• In order to activate “Maturity Lock”, “Adult Lock”
has to be set to “ON”. To set “Adult Lock”, refer
to “Pincode Setting for Adult Lock” on this page.

Language Setting
DVB

1

Follow steps 1 to 2 in “Pincode
Setting for Adult Lock” on this page.

2

Select “Language” using [U \ D],
then press [ENTER].

3

Select the item by which you want to
change the language using [U \ D],
then press [ENTER].
DVB Menu
Adult Lock
Maturity Lock
Language
About

Audio
Subtitle

34

EN

OFF

Audio
Subtitle

: Set the Audio language
: Set the Subtitle language

E3NG0FD_EN.book Page 35 Wednesday, January 30, 2008 10:37 AM

Select a language using [U \ D],
then press [ENTER].

5

Press [SETUP] to exit.

Note

About

“General Setting” using [U \ D],
then press [ENTER].

2

Select “Display” using [U \ D], then
press [ENTER].

3

Select “OSD Language” using
[U \ D], then press [ENTER].

4

Select the appropriate OSD language
using [U \ D], then press [ENTER].

You can check the current DVB system software
version of this unit.

Follow steps 1 to 2 in “Pincode
Setting for Adult Lock” on page 34.

2

Select “About” using [U \ D], then
press [ENTER].

3

Press [SETUP] to exit.

OSD Language
Français
English
Español
Deutsch
Italiano

5

Press [SETUP] to exit.

Recording

1

Basic Setup

DVB

Selecting the On-Screen Display
(OSD) Language
1 In stop mode, press [SETUP]. Select

Connections

• The Audio and Subtitle setting may not be available
for some broadcast.
• To change the audio language, refer to “Multiaudio”
on page 33.
• To display the subtitle or choose the subtitle
language, refer to “Subtitle” on page 33.

Introduction

4

Playback
Editing
Function Setup
VHS Functions
Others

EN

35

E3NG0FD_EN.book Page 36 Wednesday, January 30, 2008 10:37 AM

Setting the Clock

Manual Clock Setting

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Clock” using [U \ D], then
press [ENTER].

3

Select “Clock Setting” using
[U \ D], then press [ENTER].

Auto Clock Setting
This unit receives time signals from the analogue /
DVB channels, and set the clock automatically. Set
the channel tuning before setting Auto Clock.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Clock” using [U \ D], then
press [ENTER].

Default date will appear.

4

Press [ENTER] again.
Clock Setting

General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

01 / 01 / 2008 (TUE)
0 : 00

5

Press [P] to move the cursor to the next field. If
you want to go back to the previous field, press
[L].

6
3

Select “Auto Clock Setting” using
[U \ D], then press [ENTER].

4

Select “ON” using [U \ D], then
press [ENTER].

5
6

Press [SETUP] to exit.
Press [B ON\STANDBY] to turn the
unit off.
• The Auto clock function is activated.
• This unit will search for the time every time when
the power is turned off.
• Leave the unit off for about 10 seconds to give it
time to set the clock.

Hint
• If you want to cancel “Auto Clock Setting”, select
“OFF” using [U \ D], and then press [ENTER] at
step 4.

Note
• The default setting of “Auto Clock Setting” is “ON”.
• The clock may set itself automatically after you
connect the antenna cable to the unit and plug in the
mains cable. In this case, the current time will
appear on the front panel display.
• If there are only analogue channels memorised in
this unit:
- The channel assigned to “901” must receive the
PDC signal in order to set the clock automatically.
- The unit will correct the current time by receiving
PDC broadcasts whenever the power is turned off.
- Between 23:00 and 1:00, the Auto Clock function
will not operate even when the power is turned off.
• The clock cannot be set automatically if you are not
receiving a channel in your area that carries a time
signal. In this case, set the clock manually.
• The unit will also correct the current time
automatically at 8:00 and 1:10 if the unit is in
standby mode or if you are watching DVB channel.

36

EN

Enter the date (day / month / year)
using [U \ D].

Enter the time (hours / minutes)
using [U \ D], then press [ENTER].
The clock will start.
• Although seconds are not displayed, they will be
counted from zero.

7

Press [SETUP] to exit.

Note
• Your clock setting will be lost if either there is a
power failure or the unit is unplugged for more than
30 seconds.

E3NG0FD_EN.book Page 37 Wednesday, January 30, 2008 10:37 AM

Introduction

Recording

Type of Discs

Disc type / format

HDD

XP

60 min

18 min

33 hrs

SP

120 min

36 min

66 hrs

Copyprohibited

HDD
VR ver. 1.1 / ver. 1.2
DVD-RW ver. 1.1 / ver. 1.2 CPRM compatible
Video

DVD-RW

ver. 1.1 / ver. 1.2
ver. 1.1 / ver. 1.2 CPRM compatible
ver. 2.0

DVD+RW
DVD+R

Function Setup

DVD
8 cm

Video /
Sound
Quality

Copy- Copyfree
once

Editing

Recording time
DVD
12 cm

Some satellite broadcasts include copy-protected
information. If you want to record them, refer to the
following.

DVD-R

You can select a recording mode from 5 options.
The recording time will vary depending on the
recording mode you select as follows.
Recording
mode

Information on Copy Control

Playback

Recording Mode

Recording

Video mode is the same recording format as used on
the pre-recorded DVD-Videos you purchase in local
shops. You can play back the discs recorded in this
format in most of the DVD players. You will need to
finalise such discs (see page 59) before playing them
back in other DVD players. Unless finalised, you can
record additional materials or edit discs recorded in
Video mode with this unit. VR (Video Recording)
mode is a basic recording format for DVD-RW discs.
VR mode offers advanced editing, and you can record
and edit material repeatedly, however it is playable
only on VR mode compatible unit. Finalisation is
recommended before playing them back in other unit.
+VR mode is a recording format for DVD+RW/+R
disc. +VR mode offers basic editing, and it is playable
in most DVD players. Finalisation is recommended
before playing them back in other unit.

You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Videos and
some satellite broadcasts.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
You can only record “Copy-once only” video using a
DVD-RW disc in VR mode with Content Protection for
Recordable Media (CPRM) or internal HDD.
When recording a TV broadcast or an external input,
you can display copy control information on the
screen.
CPRM is a scrambling copy protection system for the
protection of “copy-once” broadcast programmes.
This unit is CPRM compatible, which means that you
can record copy-once broadcast programmes, but you
cannot then make a copy of those recordings. CPRM
recordings can only be played back on DVD players
that are specifically compatible with CPRM.

Basic Setup

This unit can record on DVD-RW/-R discs and
DVD+RW/+R discs.
DVD-R/+R discs allow you to record programmes only
once, and the recorded contents can be erased
although the space left on the disc does not change.
DVD-RW/+RW discs allow you to record programmes
repeatedly, and the recorded contents can be erased.
There are 3 recording formats: VR mode, Video mode
and +VR mode. VR and Video modes are available for
DVD-RW discs while as only Video mode is available
for DVD-R discs. +VR mode is available for DVD+RW/
+R discs.

Restrictions on Recording

Connections

Information on DVD Recording

VHS

: Recordable
: Not recordable

Note
240 min

72 min

133 hrs

360 min

108 min

200 hrs

SLP

480 min

144 min

267 hrs

• The recording times are estimates and actual
recording time may differ.
• The audio and video quality becomes poorer as the
recording time gets longer.

Others

EN

VHS Functions

LP
EP

• This unit cannot record on CD-RW or CD-R discs.
• DVD-RW/-R, DVD+RW/+R and CD-RW/-R discs
recorded on a personal computer or a DVD or CD
recorder may not be played back if the disc is
damaged or dirty or if there is condensation on the
recorder’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format, it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)

37

E3NG0FD_EN.book Page 38 Wednesday, January 30, 2008 10:37 AM

• Discs recorded in Video mode on this unit cannot
record additional information using other DVD
recorders.
• Since recording is performed using the Variable Bit
Rate (VBR) method, the actual remaining time for
recording may be a little shorter than the remaining
time displayed on the OSD, depending on the
picture you are recording.

Making Discs Playable in Other DVD
Players (Finalise)
After recording, you must finalise the disc to play it
back in other players. (See page 59.)
You cannot finalise discs in other DVD recorders.
After finalising
• After DVD-R discs are finalised:
- A Title menu is created automatically.
- Undo finalising is not possible.
- Additional recording or editing is not possible.
• After DVD-RW (Video mode) discs are finalised:
- A Title menu is created automatically.
- Undo finalising is possible. (See page 59.)
- Additional recording or editing is possible if you
undo finalise. (See page 59.)
• After DVD-RW (VR mode) discs are finalised:
- A Title menu is not created.
- Undo finalising is possible. (See page 59.)
- Additional recording or editing is possible if you
undo finalise. (See page 59.)
• After DVD+RW discs are finalised:
- A Title menu is created automatically.
- Undo finalising is possible. (See page 59.)
- Additional recording or editing is possible even
without undo finalising.
• After DVD+R discs are finalised:
- A Title menu is created automatically.
- Undo finalising is not possible.
- Additional recording or editing is not possible.

About HDD
HDD is a special device which has high recording
density and is suited for long-time recording or highspeed cueing but by contrast, has many factors which
can cause breakage. Use HDD on the premise that
you should dub the recorded programmes to a DVD
disc to protect your precious videos.
HDD is a temporary storage location:
HDD is not a permanent storage location of the
recorded contents. Be sure to use it as a temporary
storage location until you watch the programmes
once, edit them, or dub them to a DVD disc.

38

EN

Be sure to dub (back up) data promptly if you find
abnormalities in HDD:
If there is mechanical trouble with the HDD, grinding
or other sounds may be heard or blocky noise may
appear on the image. If you continue to use as it is,
deterioration may continue and eventually the HDD
may not be used at all. If you notice these symptoms
of a failing HDD, promptly dub the data to a DVD disc.
When an HDD fails, recovery of recorded content
(data) may be impossible.
About the remaining capacity of HDD recording
time:
In recording to HDD, the Remaining Capacity Display
may differ from the actual recordable time as this unit
adopts Variable Bit Rate encoding, which varies the
recording (storage) amount of data in conformity with
the information amount of video. Before recording to
the HDD, ensure there is sufficient space on the HDD
by deleting unnecessary titles in advance. (Remaining
capacity will not increase if you only delete Playlists.)

Maximum Recordable Numbers of
Title / Chapters
HDD:
600 Original titles
600 Playlists
99 chapters per Original/Playlist title
VR mode DVD:
99 titles per each Playlist and Original
999 chapters per each Playlist and Original
Video mode DVD:
99 titles per disc
99 chapters per title
+VR mode DVD:
49 titles per discs
254 chapters per disc
99 chapters per title

E3NG0FD_EN.book Page 39 Wednesday, January 30, 2008 10:37 AM

Choosing the Recording Format of a
Blank DVD-RW Disc
VR

DVD+RW
DVD+R
DVD+R
Use this feature to make the unfinalised +VR mode
discs recorded on other unit recordable on this unit.
When you make an additional recording on this unit
with “Make Recording Compatible” set to “ON”, the
title list is automatically converted to this unit’s style.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

3

Select “Make Recording Compatible”
using [U \ D], then press [ENTER].

4

Select “ON” or “OFF” using [U \ D],
then press [ENTER].

In stop mode, press [SETUP].
Select “DVD Menu” using [U \ D],
then press [ENTER].

4

Select “Format Mode” using [U \ D],
then press [ENTER].

5

Select “Video mode” or “VR mode”
using [U \ D], then press [ENTER].
Format Mode

Make Recording Compatible
ON
OFF

ON:

Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
OFF: Prohibiting additional record to the disc that has
a title list created by other units.

5

Playback

Select “Format” using [U \ D], then
press [ENTER].

Recording

3

Basic Setup

1
2

Make Recording Compatible

Connections

Video

DVD-RW
DVD-RW
When inserting a brand-new DVD-RW/+RW disc, the
unit automatically starts to initialise the disc.
DVD+RW disc will always be formatted in +VR mode,
and DVD-RW disc will be formatted either Video or
VR mode according to the recording format mode
setting of the unit. Before insert a brand-new DVD-RW
disc, you need to set the recording format to the
desired mode. You can also manually format a DVDRW disc once it has been used.

Introduction

Formatting a Disc

Press [SETUP] to exit.

Video mode
VR mode
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.

Editing

6
7

Press [SETUP] to exit.
Insert a blank disc.
Formatting will start.

Formatting is complete.

Function Setup

8

“100%” is indicated.

Note

VHS Functions

• The recording format setting is effective only for
DVD-RW discs. You cannot change the recording
format for a DVD-R disc and DVD+RW/+R disc.
• You cannot mix two formats on one DVD-RW disc.
If you insert a disc that has been recorded before,
the recording format cannot be changed even if you
change it in “Setup” menu.

Others

EN

39

E3NG0FD_EN.book Page 40 Wednesday, January 30, 2008 10:37 AM

Setting Aspect Ratio for Video Mode
Recording

Setting Auto Chapter
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

Video

DVD-RW
DVD-R
You can set aspect ratio for video mode recording.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

3
4

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
The unit inserts a chapter mark periodically (every 15
minutes by default) during recording. Using the Auto
Chapter menu, you can set this function off or change
the time period.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

Select “Aspect Ratio (Video mode)”
using [U \ D], then press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

Select your desired setting using
[U \ D], then press [ENTER].

3

Select “Auto Chapter” using [U \ D],
then press [ENTER].

Aspect Ratio (Video mode)

General Setting

Auto
4:3
16 : 9

Auto (default):

4:3 :
16:9 :

5

Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

It will be recorded with whichever the
ratio that the programme you started
to record is broadcasted with.
Recorded in the aspect ratio of 4:3.
Recorded in the aspect ratio of 16:9.

Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Video Colour System

Press [SETUP] to exit.

Note

4

• For HDD and VR mode DVD-RW disc, the image will
be recorded in whichever the ratio that the
programme you record is broadcasted with,
regardless of the “Aspect Ratio (Video mode)”
setting.
• For DVD+RW/+R disc, the image will always be
recorded in aspect ratio of 4:3.

If you want to set “Auto Chapter” off,
select “OFF” using [U \ D], then
press [ENTER].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes

If you want to change the time period
for “Auto Chapter”, select the required
time period using [U \ D], then press
[ENTER].

5

Press [SETUP] to exit.

Note
• The interval for auto chapter may be up to 2 minutes
different from the time option you set.
• While recording, no more chapter mark will be
added after coming up to the maximum chapter
mark number.

40

EN

E3NG0FD_EN.book Page 41 Wednesday, January 30, 2008 10:37 AM

Video

VR

Note

Insert a recordable disc.

1
2

In stop mode, press [SETUP].
Select “DVD Menu” using [U \ D],
then press [ENTER].

This unit can receive bilingual broadcasts.
You can switch between modes by pressing
[AUDIO D]. Each mode is indicated on the TV.
When you record a DVB channel, only output sound
channel will be recorded.

Setting External Input Audio
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
When the external input audio is a bilingual
broadcast, you can choose “Stereo” or “Bilingual” to
record on an HDD/DVD. This setting is only for
recording external input (AV1/AV2/AV3).

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

Select “Format” using [U \ D], then
press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

4

Select “Start” using [U \ D], then
press [ENTER].

3

Select “External Input Audio” using
[U \ D], then press [ENTER].

For DVD+RW, use [U \ D] to select “Yes”, then
press [ENTER].

General Setting

Select “Yes” using [U \ D], then
press [ENTER].
e.g.) VR mode DVD-RW

Playback

Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

A pop up window will appear and prompt you to
confirm.

5

Recording

3

Basic Setup

• When you reformat the disc, the contents of the disc
are erased.
• Make sure that the recording format is set to the
desired mode. (Refer steps 1 to 6 in “Choosing the
Recording Format of a Blank DVD-RW Disc” on
page 39.)

Selecting the Sound Mode

Connections

DVD-RW
DVD-RW
DVD+RW
If you are using a DVD-RW/+RW disc, you can format
the disc by performing “Format”. You can format DVDRW disc for either Video mode recording or VR mode
recording. DVD+RW disc can be formatted in order to
erase all content of the disc.

Introduction

Reformatting a Disc Manually

Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Video Colour System

Editing

Are you sure?
Yes
No

Formatting will start.
If you want to cancel formatting, select “No”.

6

4

Formatting is complete.

Select “Stereo” or “Bilingual” using
[U \ D], then press [ENTER].

• It is not possible to use a disc formatted with this unit
in other DVD recorder. When you use a disc with
another DVD recorder, format a disc using that DVD
recorder.

Function Setup

External Input Audio
Stereo
Bilingual

Note

5

Press [SETUP] to exit.

Hint

VHS Functions

• If you select “Stereo”:
The audio will be recorded as “stereo audio”.
• If you select “Bilingual”:
The audio will be recorded as “bilingual audio”. (See
“Setting Bilingual Recording Audio” on page 42 for
more detail.)

Others

EN

41

E3NG0FD_EN.book Page 42 Wednesday, January 30, 2008 10:37 AM

Setting Bilingual Recording Audio

Recording Audio Select (XP)

Video

DVD-RW
DVD-R
DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in Video mode or +VR mode.
This setting is only for recording analogue channel.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

3

Select “Bilingual Recording Audio”
using [U \ D], then press [ENTER].

4

Select “Main” or “Sub” using
[U \ D], then press [ENTER].
Bilingual Recording Audio
Main
Sub

5

HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
You can enjoy high quality sound recording. This
function works only when the recording mode is set at
XP.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

3

Select “Recording Audio Select
(XP)” using [U \ D], then press
[ENTER].

4

Select “PCM” or “Dolby Digital”
using [U \ D], then press [ENTER].
Recording Audio Select (XP)

Press [SETUP] to exit.

PCM
Dolby Digital

Note
• If you are recording onto an HDD or VR mode disc,
both “Main” and “Sub” will be recorded regardless of
your setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.

PCM:

Records PCM audio for the best
quality sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.

5

Press [SETUP] to exit.

Note
• “PCM” stands for Pulse Code Modulation. It
changes analogue sound to digital sound without
compressing audio data.
• When the recording mode is set at other than XP,
the unit records “Dolby Digital” audio automatically
even if you selected “PCM”.

42

EN

E3NG0FD_EN.book Page 43 Wednesday, January 30, 2008 10:37 AM

Basic Recording
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

Press [B ON\STANDBY] to turn on
the unit.
Turn on the TV and be sure to select the input to
which the unit is connected.

Press [OPEN\CLOSE A] to open the
disc tray.

3

Place the disc on the disc tray with
its label facing up. Be sure to align
the disc with the disc tray guide.

Recording

2

Basic Setup

If you are recording to the HDD, press [HDD],
then proceed to step 5.
If you are recording to a disc, press [DVD].

Note
• Recording starts immediately and continues until the
disc is full or you stop recording.
• You cannot change the recording mode in the REC
or REC pause mode.
• Even if the broadcasting you are recording is in the
SECAM system, this unit automatically converts it to
the PAL system when recording.
• If the external equipment is connected to AV2, the
picture of the external equipment will be output
except during the DVD playback of this unit. Turn off
the external equipment or press [DISPLAY] to
output the picture of this unit.
• You can play back a title on one component while
making a recording on the other component. To do
so, simply select the component (HDD or DVD) you
want to use for the playback by pressing [HDD] or
[DVD] during HDD / DVD recording. And then follow
the normal playback procedure.
• If playback and recording are in progress at the
same time, select the appropriate component by
pressing [HDD] or [DVD] before you press
[PAUSE F] or [STOP C] to pause or stop the
operation.
• NTSC recording is prohibited in this unit.

Connections

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
Follow the steps below to record a TV programme.
(See page 93 for VHS recording.)

1

Introduction

Hint
• You can change the channel while in the REC pause
mode.

Playback

Disc tray guide

5

Select the recording mode using
[REC MODE]. (See page 37.)

6

Press [INPUT SELECT F] to select
DVB, analogue or external input
mode, then select the desired
channel to record using
[PROG. G \ H] or
[the Number buttons].

7

Press [REC I] to start recording.

Function Setup

Press [OPEN\CLOSE A] to close the
disc tray.

Editing

4

The “I HDD” or “I DVD” mark will be displayed
on the TV screen briefly.

VHS Functions

To pause the recording, press [PAUSE F]. Press
[PAUSE F] or [REC I] again to restart the
recording.

8

Press [STOP C] to stop the
recording.
This operation may take a few moments to
complete.

Others

EN

43

E3NG0FD_EN.book Page 44 Wednesday, January 30, 2008 10:37 AM

One-touch Timer Recording
(OTR)
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
This is a simple way to set the recording time in blocks
of 30 minutes. Check that the disc you are recording
onto has enough space remaining for the time you
set. (See page 94 for VHS recording.)

1
2

Follow steps 1 to 6 in “Basic
Recording” on page 43.
Press [REC I] repeatedly until the
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.

Timer Recording
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
You can set the unit to record up to 36 programmes,
up to a month in advance. Daily or weekly programme
recordings are also available.
• Be sure to set the clock before entering a timer
programming.

Insert a recordable disc.

1

In stop mode, press [TIMER PROG.].
“Timer Programming” list will appear.

2

Select “New Programme” using
[U \ D], then press [ENTER].
Timer Programming

One-touch Timer Recording will start.

0:30
Normal
Recording

8:00

DVD-R

0:00 THU 06/12

Date
06/12
07/12

1:00

Start
End
CH
7:00
9:00
18
9:00
9:30
190
New Programme

STTL
VPS/PDC

7:30

• When the unit reaches the specified time, it will
be turned off automatically.
• To change the recording length during Onetouch Timer Recording, press [REC I]
repeatedly until the desired length appears.
• To cancel One-touch Timer Recording within the
specified time, press [STOP C].

1/1

• If there are 7 programmes or more, use
[SKIP H \ G] to turn the page.

3

Enter the date using [U \ D], then
press [P].
Each time you press [D] at the current date, the
timer recording date will change as follows.

Hint
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.
• The remaining recording time will be displayed on
the front panel display during One-touch Timer
Recording.
• Unlike the timer recording, you can perform the
following operations during One-touch Timer
Recording.
- Turn off the power. (One-touch timer recording will
be cancelled.)
- Use [REC I] on the remote control.

e.g., 1st January
01/01
Daily
M-F (Mon.-Fri.)
W-SAT
W-FRI

W-SUN

31/01

Note
• You cannot use the pause function during Onetouch Timer Recording.
• The unit will be turned off automatically under the
following conditions.
- No space remains on the disc.
- If a power failure occurs.
• If the external equipment is connected to AV2, the
picture of the external equipment will be output
except during the DVD playback of this unit. Turn off
the external equipment or press [DISPLAY] to
output the picture of this unit.

Timer Programming

0:00 THU 06/12

Skip
CH
901

Date
01/01
REC To
HDD

Start
- :Mode
XP
XP

End
- :VPS/PDC
OFF
1:00

1/1

4

44

EN

Enter the time to start and to end
using [U \ D], then press [P].

E3NG0FD_EN.book Page 45 Wednesday, January 30, 2008 10:37 AM

Select the channel number to record
using [U \ D], then press [P].
To record from the external input, select “AV1”,
“AV2”, or “AV3”.

Select the recording media (“HDD”
or “DVD”) using [U \ D], then press
[P].

7

Select the recording mode using
[U \ D], then press [P].
Refer to “Recording Mode” on page 37.

8

If you set “STTL” to “ON”, subtitle will be recorded
too.
• When analogue channel is selected, “VPS/PDC”
will be displayed instead of “STTL”.

9

Playback

Refer to “VPS (Video Programme System) / PDC
(Programme Delivery Control)” on page 46.
• When DVB channel is selected, “STTL” will be
displayed instead of “VPS/PDC”.
• VPS/PDC system is only available for HDD.
• VPS/PDC system is not available for “Daily” and
“M-F” timer programme.

Alternate recording (DVD only)...
If there is no recordable disc in the unit, if the disc
does not have enough space to complete the
recording, or if the material is “copy-once” programme
and prohibited to be recorded on a DVD in the unit,
the unit will detect it and automatically record to the
HDD even when DVD is selected as the recording
media. If the available space on the HDD is less than
that of DVD, the unit will not perform the alternate
recording. This feature is available only for timer
recording. Not available for one-touch timer recording.

Recording

For analogue channel recording:
Select “VPS/PDC” to “ON” or “OFF”
using [U \ D].

Basic Setup

For DVB channel recording:
Select “STTL” to “ON” or “OFF”
using [U \ D].

Note
• If you have not set the clock, the clock setting
window will appear instead of the Timer
Programming list. Continue from step 4 in “Manual
Clock Setting” on page 36 before programming the
timer.
• Press [U \ D] to move the cursor in “Timer
Programming” list.
• If you have a timer programme with VPS/PDC
function, and if you are watching different channel
from the timer programme, confirmation message to
change the channel will appear 15 minutes before
the programme starts (the message will also reappear 30 seconds before the programme starts).
The channel will automatically be changed to the
programmed channel 15 seconds before the
programme starts.

Connections

6

Introduction

5

Press [ENTER] when all information
required is entered.

Editing

Your programme setting is stored.
• To set another programme, repeat steps 2 to 9.
• To exit, press [TIMER PROG.].
• When 2 or more programmes are overlapped,
“Timer programme overlapped” appears, and
the overlapped programme will be displayed in
blue. To correct the timer programme, refer to
“Checking, Cancelling or Correcting the Timer
Programming Information” on page 46.
Timer Programming

Function Setup

0:00 THU 06/12

Date
06/12
07/12
07/12

Start
End
CH
7:00
9:00
18
9:30
190
9:00
17:00
18:00
901
New Programme

STTL
VPS/PDC

VHS Functions

1/1

The

icon will appear on the front panel display.

Others

EN

45

E3NG0FD_EN.book Page 46 Wednesday, January 30, 2008 10:37 AM

VPS (Video Programme System) /
PDC (Programme Delivery Control)

Skip the Periodical Timer Recording

The Video Programme System (VPS) or Programme
Delivery Control (PDC) assures that the TV
programmes you have programmed for timer
recording are recorded exactly from beginning to end,
even if the actual broadcasting time differs from the
scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a
programme is interrupted, the recording will also be
interrupted automatically and resumed when the
programme starts again.

1
2

In stop mode, press [TIMER PROG.].

3

Select “Programme Change” using
[U \ D], then press [ENTER].

4

Move the cursor to the “Skip” field
using [L \ P], then select “ON” using
[U \ D] and then press [ENTER] to
activate the setting.

If the VPS/PDC signal drops out because the
broadcast signal is weak, or if a broadcasting station
does not transmit a regular VPS/PDC signal, the timer
recording is performed in normal mode (without VPS/
PDC) even if it was programmed for VPS/PDC. If the
starting time of the VPS/PDC timer recording is
between 0:00 and 3:59 on a given day, the VPS/PDC
function will operate from 20:00 on the previous day to
4:00 on the next day. If the starting time of the VPS/
PDC timer recording is between 4:00 and 23:59 on a
given day, the VPS/PDC function will operate from
0:00 on the given day to 4:00 on the next day. This
means that if the relevant programme is broadcasted
within this period, it is recorded correctly. If the timer is
not programmed correctly, the incorrect timer setting
stays in effect unless you cancel it. To cancel an
incorrect timer setting, refer to “Checking, Cancelling
or Correcting the Timer Programming Information” on
this page.

Note
• This feature is only available for analogue channels.

Checking, Cancelling or Correcting
the Timer Programming Information

1
2

3

Press [TIMER PROG.].
A) To delete the timer programme:
1) Select the programme you want to delete using
[U \ D], then press [ENTER].
2) Select “Delete” using [U \ D], then press
[ENTER].
Confirmation window will appear.
3) Select “Yes” using [U \ D], then press
[ENTER].
B) To correct the timer programme:
1) Select the programme you want to correct
using [U \ D], then press [ENTER].
2) Select “Programme Change” using [U \ D],
then press [ENTER].
3) Correct the timer programme by using
[U \ D \ L \ P], then press [ENTER].

Press [TIMER PROG.] to exit.

To check the timer programming in progress
Press [TIMER PROG.].

46

EN

You can deactivate the periodical (Daily, Mon-Fri or
Weekly) timer recording temporarily.

Select the periodical timer recording
programme you want to skip using
[U \ D], then press [ENTER].

• “✔” will be displayed on the left side of the timer
programme.
• The setting will go back to “OFF” after the
programme is skipped once.

Stop the Timer Recording in Progress
On the front panel of the unit, press
[C STOP] to stop the recording, or
press and hold [STOP C] on the remote
control for 2 seconds.
• You can also stop the timer recording in progress by
deleting the timer programme. Press
[TIMER PROG.] while the timer recording is in
progress, then follow steps 2-A) and 3 of the
“Checking, Cancelling or Correcting the Timer
Programming Information” on this page.

If the Timer Programming Did Not
Complete Correctly
The error number appears on “Timer Programming”
list.
Timer Programming

0:00 THU 06/12

Date
E40 06/12

CH
Start
End
7:00
9:00
901
New Programme

STTL
VPS/PDC

1/1

The error programme will be displayed in gray
with an error number.

E3NG0FD_EN.book Page 47 Wednesday, January 30, 2008 10:37 AM

Hints for the Timer Recording
• If there is a power failure or the unit is unplugged for
more than 30 seconds, the clock setting and all
timer settings will be lost.
• If a disc is not inserted or if a inserted disc is not
recordable (finalised DVD-RW/-R, finalised DVD+R,
a fully recorded disc, etc.), the unit will perform the
alternate recording to the HDD. (See page 45.)
• When a timer recording is completed, the unit will
ask you whether to turn off the unit if there is no
timer recording which starts within 4 minutes, except
under conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the
screen.
• The unit will be turned off automatically if you select
“Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted.
• The audio language which is selected in the “DVB
Menu” will be recorded for the timer recording of
digital TV broadcasting.
• Timer recording whose recording time exceeds 12
hours cannot be made.
• It is prohibited to turn off the unit from 4 minutes
before the programmed starting time.
• It is prohibited to change channel from 15 seconds
before the programmed starting time.
• [REC I] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes
before the starting time during regular or one-touch
timer recording, the recording in progress will be
stopped.
• Playback of DVD/CD is prohibited from 2 minutes
before the programmed starting time when the
recording media is DVD. If it comes to 2 minutes
before the programmed starting time during DVD/
CD playback, the playback will be stopped.
• When 2 or more programmes are overlapped,
“Timer programme overlapped” appears, and the
overlapped programme will be displayed in blue. To
correct the timer programme refer to “Checking,
Cancelling or Correcting the Timer Programming
Information” on page 46.
• If the Start time is earlier and the End time is later
than the current time, the recording will start
immediately after you press [ENTER] at step 9 on
page 45.

Connections
Basic Setup
Recording
Playback

• Timer programme with an error number will be
cleared once the entry screen for the
programme is displayed.

Introduction

The error numbers indicate:
E1–E22,
E37–E39 : Recording error
E23–E24 : Unrecordable disc
E25/E51 : • Copy prohibited programme
: • Cannot record because of the NTSC
/ PAL-60 signal is received.
E26–E28 : Copy prohibited programme
E29
: Disc protected
E30
: Disc full
E31
: Already recorded 99 titles (Video
mode)
E32
: Already recorded 99 titles (VR mode)
E33
: Already recorded 999 chapters
E34
: No space for Control Information
E35
: PCA (Power Calibration Area) full
E36
: Already finalised Video format disc
E40
: • There are some unrecorded parts
due the overlapped timer
programmes.
: • Recording did not start at the start
time.
E41
: Power failure
E42
: No disc
E43
: Already 49 titles recorded
(+VR mode)
E44
: Already 254 chapters recorded
(+VR mode)
E45
: Copy prohibited programme
E46
: It is impossible to record additionally
on a disc recorded by other units
when setting “Make Recording
Compatible” to “OFF”. (+VR mode)
E47
: Already 600 titles recorded on the
HDD.
E49–E50 : HDD recording is cancelled due to the
insufficiency of the disc space on the
HDD.

Editing
Function Setup
VHS Functions
Others

EN

47

E3NG0FD_EN.book Page 48 Wednesday, January 30, 2008 10:37 AM

Priority of overlapped settings
The unit records programmes according to priority if
the timer programmes overlap.

Timer Recording (EPG)

If the starting time is same:
• The timer programming set first (PROG. 1) has
priority.
PROG. 1
PROG. 2

Actual
recording

PROG. 1

PROG. 2

PROG. 2
recording
will start
after
PROG. 1
recording
is
completed.

HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
With EPG system, you can programme DVB channel
recording much easier. You can only choose one
programme and enter the selection.

1

The first 2 minutes (at the longest) will be cut off.

While viewing a DVB programme,
press [GUIDE].
List of DVB programmes will be displayed.

When the starting time and the ending time for
each programmes are different:
• A programme that has earlier start time has priority.

e.g.) Weekly mode
Weekly mode
Date 19/01/2008
Time 10:24:00

PROG. 1

Frid Sat Sun Mon Tue Wed Thu Frid
10:00

PROG. 2
1
2
3
4
5
6

PROG. 3
Actual
recording

PROG. 1

PROG. 3

PROG. 2

The first 2 minutes (at the longest) will be cut off.

ITV1
ITV2
ITV3
Channel
E4
More 4

11:00

12:00

Quiz Call
Quiz Call
Frien Frien Smallville Holly Girls
Easter Parad Deal or N Jamie The
ITV4 return Marri Marri Now and Ag
My P The N CITV returns at 06:00

11:00-12:00 Quiz Call

If the recording time is partially overlapped:
• The timer programming with the earlier start time
(PROG. 2) has priority. PROG. 1 will start after
PROG. 2 recording is complete.

Daily

PROG. 2

PROG. 1

If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not
recorded.
PROG. 1
PROG. 2
Actual
recording

PROG. 2

Note for DVD recording
• If the recording time of two programmes are
overlapped, or the End time of a programme and the
Start time of another is same, the first 2 minutes (at
the longest) of the subsequent programme will be
cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• The beginning of the PROG. 2 may be cut off.
PROG. 1
PROG. 2
Actual
recording

PROG. 1

PROG. 2
The first 2 minutes (at the
longest) will be cut off.*

* If the cut off time exceeds 3 minutes, the error
number “E40” will appear in “Timer Programming”
list.

48

EN

Timer

Select a desired programme using
[U \ D \ L \ P], then press [ENTER]
or [BLUE].

3

Set “End”, “REC To”, “Mode” and
“STTL” using [U \ D \ L \ P], then
press [ENTER].

PROG. 2

The first 2 minutes (at the longest) will be cut off.

Extended

2

PROG. 1

Actual
recording

Weekly

Press [RED] or [GREEN] to change “Daily mode”
or “Weekly mode”.

E3NG0FD_EN.book Page 49 Wednesday, January 30, 2008 10:37 AM

HDD

You can set the unit to start recording whenever it
detects the video scart control from the external tuner.

Timer
Recording
Satellite Link
Actual
Recording

Example 2

Recording

[Preparation of this unit]
• Make sure to select the desired Recording
mode beforehand.
External tuner
(not supplied)

Example 1

Basic Setup

[Preparation of the external tuner]
• The external tuner should be equipped with
some kind of timer function. Using timer function
of the tuner, set it to be turned on when it comes
to the time you want to start recording, and off
when it comes to the time you want to finish
recording. (Refer to the tuner’s manual on how
to set the timer.)
• Make sure to turn off the external tuner when
you finish setting.

Connections

Preparing for the Satellite Link Timer Recording:

Introduction

Satellite Link

Note
• Recording picture will be distorted if the copy
protection signal is being detected during Satellite
Link Timer Recording.
• [SAT.LINK] does not work under the following
circumstances:
- Setup menus are displayed.
- “Timer Programming” menu is displayed.
- Title list or any file list is displayed.
• When a regular Timer Recording and the Satellite
Link Timer Recording are overlapped, the examples
are given below.

Timer
Recording
Satellite Link

Scart cable (not supplied)

Actual
Recording

Playback

Example 3
HDMI OUT

Timer
Recording
Satellite Link

In stop mode, press [HDD] then
select the recording mode for HDD
using [REC MODE].

2

Press [SAT.LINK].

Actual
Recording

Editing

1

Function Setup

• “Sat” will appear on the front panel display and
the unit goes into the Satellite Link standby
mode.

VHS Functions

To cancel the Satellite Link function in the
Satellite Link standby mode:
Press [B ON\STANDBY] or [SAT.LINK] to turn on
the unit.
To cancel the Satellite Link function while the
Satellite Link Recording is in progress:
Press [C STOP] on the front panel of the unit, or
press and hold [STOP C] on the remote control for
2 seconds.

Others

EN

49

E3NG0FD_EN.book Page 50 Wednesday, January 30, 2008 10:37 AM

Settings for External Equipment

Recording from External Equipment
HDD

Video Colour System
When you record from external equipment or copy a
videotape to a DVD disc, you can set the format Auto,
PAL or SECAM.

1

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Recording” using [U \ D],
then press [ENTER].

3

Select “Video Colour System” using
[U \ D], then press [ENTER].

4

Select “Auto”, “PAL” or “SECAM”
using [U \ D], then press [ENTER].

Auto Chapter
Recording Audio Select (XP)
Video Colour
AutoSystem
Finalise
Aspect Ratio (Video mode)
Auto
Make Recording Compatible
PAL
Bilingual Recording Audio
SECAM
External Input Audio
Video Colour System

Auto

The video colour system will be set
: automatically according to the
recording material.

PAL

:

The video colour system will be set to
PAL.

The video colour system will be set to
SECAM :
SECAM.

5

Press [SETUP] to exit.

Note
• During recording, when a signal other than PAL or
SECAM is detected, an error message appears on
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.

50

EN

VR

DVD-RW

DVD-R

VHS
DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
Before recording from external equipment, see page
22 for connection instructions.

1

Turn the TV and the unit on, and
select the input of the TV to which
the unit is connected.
If you are recording to the HDD, press [HDD].
If you are recording to a disc, press [DVD] and
insert a recordable disc.
If you are recording to a videotape,
press [VCR] and insert a recordable
videotape.

2

Select the input terminal to which the
external equipment is connected
(AV1, AV2, or AV3).
To use the input jacks on the rear of the unit,
select “AV1” or “AV2” position by pressing
[INPUT SELECT F] or [PROG. G \ H].
To use the input jacks on the front of this unit,
select “AV3” position by pressing
[INPUT SELECT F] or [PROG. G \ H].

General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

Video

DVD-R
DVD-RW
VD-RW
W

3

Select a recording mode using
[REC MODE]. (See page 37.)

4

Press [I REC] on the unit to start
recording.

5

Press the [PLAY] button on the
external equipment.

6

Press [C STOP] (HDD/DVD) or
[A / C EJECT/STOP] (VHS) on the
unit to stop recording.

Note
• During recording, recording will be paused when a
signal other than PAL or SECAM is detected. (See
“Video Colour System” on this page for details.)
• If the external equipment is connected to AV2, the
picture of the external equipment will be output
except during the DVD playback of this unit. Turn off
the external equipment or press [DISPLAY] to
output the picture of this unit.

E3NG0FD_EN.book Page 51 Wednesday, January 30, 2008 10:37 AM

Information on DV Dubbing
This function helps you to dub the contents in the
DVC (digital video camcorder) to HDD, DVD or VHS
easily. (See page 94 for “DVC to VHS Dubbing”.)
You can control basic operations of the DVC from the
remote control of this unit if the DVC is in video mode.

1
2

3

Press [DISPLAY] to display the DVC
information on the screen.

When the DVC is in video mode...
T

1/ 1 C

Command menu

5
6

External input channel
Product name of your DVC

• “Start Rec” or “Pause Rec” will appear.

• If the unit cannot recognise the input signal from
the DVC or if it is the unknown product,
“No Device” or “****” will appear instead.

1/ 1
-RW

DVD
Stereo1

Control
DV Audio
Start Rec

4

VR

ORG

DV
AB-1234
0:12:34

7

Playback

1
2

• “DV Audio” can be changed. With “DV Audio”
selected, press [ENTER] to display “DV Audio”
menu. Select the audio you want to output using
[U \ D], then press [ENTER].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was
added after the recording.
- Select “Mix” to dub the stereo1 and stereo2.

Recording

Press [INPUT SELECT F]
repeatedly to select the appropriate
external input channel for DV input
jack (AV4).

Recording audio mode

Basic Setup

2

3

Connections

Connect your DVC to the DV input
jack on the front panel using a DV
cable. (Use the DV cable that has 4pin input jack and is compliance with
the IEEE 1394 standards.)

DV icon
Indicator of active device
• With “Control” highlighted, press [ENTER] to
display the available devices to control with the
remote control of this unit. Select the device you
want to operate using [U \ D], then press
[ENTER].
- Select “HDD” / “DVD” to control this unit with the
remote control of this unit.
- Select “DVC” to control your DVC with the
remote control of this unit.

Guide to DV and On-Screen Display

1

Introduction

The following instructions are described with
the operations using the remote control of this
unit.

Status of the current operation and the
time counter
Each icon means (Available icons may vary
depending on the DVC):

DVD SP

DVC is in stop mode.

2:00

4

DVC is in pause mode.

When the DVC is in camera mode...
T

1/ 1 C

Editing

DVC is in playback mode.

3

DVC is fast forwarding. (standard speed)
DVC is fast forwarding. (faster than above)

1/ 1
VR

ORG

5

DV
AB-1234
0:12:34

Function Setup

-RW

DVC is fast forwarding. (faster than above)
DVC is slow forwarding. (standard speed)
DVC is slow forwarding. (faster than above)
DVC is slow forwarding. (faster than above)

7

DVC is fast forwarding. (in stop mode)

2:00

VHS Functions

DVD SP

DVC is fast reversing. (in stop mode)

6

The menu changes according to the mode of DVC.
Switch the mode on the DVC to video mode for the
dubbing information.

DVC is fast reversing. (standard speed)
DVC is fast reversing. (faster than above)
DVC is fast reversing. (faster than above)
DVC is in slow reverse playback.

Others

DVC is in recording.
DVC is in recording pause mode.
Please also read the operating instructions of
your DVC for more information.

EN

51

E3NG0FD_EN.book Page 52 Wednesday, January 30, 2008 10:37 AM

5

Press [PLAY B] to start playing back
the DVC, and find where you want to
start dubbing.
Press [STOP C] when it comes to the
desired start point.

6

Select “Start Rec” using [U \ D],
then press [ENTER].

DVC to HDD / DVD Dubbing
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
Before recording from DVC, see page 22 for
connection instructions. (See page 94 for DVC to VHS
Dubbing.)

Preparing for DV dubbing (DVC to HDD):
• Make sure your DVC is in video mode.

To stop dubbing;

Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
• Make sure your DVC is in video mode.

2

If you are dubbing to the HDD, press [HDD] first.
If you are dubbing to a disc, press [DVD] first.

1

2

Press [REC MODE] to select a
recording mode. (See page 37.)

3
4

Press [DISPLAY].
With “Control” highlighted, press
[ENTER] to display the available
devices to control with the remote
control of this unit. Select “DVC”
using [U \ D], then press [ENTER].
e.g.) DVC to DVD dubbing
T

1/ 1 C

1/ 1
-RW

Control

DVD

DV Audio
Start Rec

Stereo1

VR

ORG

DV
AB-1234
0:00:00

DVD SP

2:00

Now you can operate your DVC with the remote
control of this unit.

EN

1

3

Select “Control” using [U \ D], then press
[ENTER].
Select “HDD” / “DVD” using [U \ D]
(whichever the recording component you
are using), then press [ENTER].
Press [STOP C].

Note

Select “DV” channel using
[INPUT SELECT F] or
[PROG. G \ H].

DV
AB-1234
0:00:00

52

The dubbing will start.

• The tape will rewind a few seconds when you press
[ENTER] at step 6 so that the dubbing starts exactly
where you press [PAUSE F] instead of [STOP C]
at step 5.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit
directly. Do not connect this unit and DVC via any
other unit.
• Do not connect more than one DVC.
• The unit can only accept DVC. Other DV device
such as cable/satellite box or D-VHS VCR cannot be
recognised.
• If no video signal is detected from the DVC during
DVC to HDD or DVD dubbing, the recording will be
paused and “I” will flash on the TV screen. The
recording will resume when the unit detects the
video signal again.
• When the DVC is in camera mode, refer to “Guide to
DV and On-Screen Display” on page 51.
• Date / time and cassette memory data will not be
recorded.
• Pictures with a copy-guard signal cannot be
recorded.
• A DV terminal is a terminal that can use the
transmission mode conforming to the IEEE 1394
standards called “Fire Wire”. It serves as the
interface that connects the PC and peripheral device
such as “i.Link” (registered trademark of SONY). It
enables digital dubbing between DV devices with
little degradation.
• You cannot dub from DVC to both HDD and DVD at
the same time.

E3NG0FD_EN.book Page 53 Wednesday, January 30, 2008 10:37 AM

Difference between “Copy” and “Move”:
After dubbing the programme, the original
programme will remain.

Move:

After dubbing the programme, the original
programme will not remain.

Available dubbing direction for copy-once
programme:
To

DVD-RW
(VR)

DVD-RW (VR)
(Not CPRM-compatible)

⳯

DVD-RW (Video)

⳯

DVD-R / +RW / +R

⳯

Videotape

嘷*2

HDD (Internal)

⳯

Videotape

嘷*2

HDD (Internal)

嘷

DVD-RW (VR)
(CPRM-compatible)

嘷*2

DVD-RW (VR)
(Not CPRM-compatible)

⳯

DVD-R / +RW / +R

⳯

“Auto”
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically.
• The recording may be cut short when the available
recording space of the disc is too limited.

Note

Guide to Dubbing Menu Display
HDD

DVD

3000 MB

3

2

Add
Delete All
Dubbing Start

4

1/1

Other recording modes
Refer to page 37 for the information on other
recording modes.

Dubbing direction
Dubbing menu
Remaining recordable space
Dubbing list
Current page number / total number of
pages

Others

1
2
3
4
5

5

VHS Functions

Dubbing List

Function Setup

*1 The programme (recorded) moves. (It will be
deleted from HDD.)
*2 You cannot dub the recorded programme to HDD
or DVD-RW again. (Copy control signal will be
recorded to the videotape.) (Refer to page 37 for
details about CPRM.)

• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
be changed). During high speed dubbing, the
playback picture will not appear.
• When you dub an HDD title that has bilingual audio
to Video mode DVD-RW / -R or DVD+RW / +R disc,
select an appropriate audio format in the “Bilingual
Recording Audio” menu. Refer to “Setting Bilingual
Recording Audio” on page 42.
• In order to dub a DVD recorded with the NTSC, set
the “TV System” to “PAL”. Refer to “9. TV System”
on page 88.
• If you stop the dubbing halfway, the contents will be
dubbed up to where you stop the dubbing (except
for the high speed dubbing). With high speed
dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [C STOP] on
the front panel or press [STOP C] for 2 seconds on
the remote control. If you stop the high speed
dubbing or stop the dubbing copy-once
programmes, confirmation message appears. Select
“Yes” using [U \ D], then press [ENTER] to
proceed.

Editing

嘷: Available
⳯: Not available

1

Playback

Videotape

嘷*1,*2

Recording

HDD
(Internal)

DVD-RW (VR)
(CPRM-compatible)

Basic Setup

Copy :

“High”
This unit is compatible with the high speed dubbing
from HDD to DVD or VR mode DVD-RW disc to HDD.
With the high speed dubbing, you can dub a title much
faster than the normal speed dubbing without
changing the quality of the picture and sound. (e.g. If
you dub a title recorded in SLP mode to DVD-R or
DVD+R, dubbing speed will be 32 times faster than
the normal dubbing speed.) To perform the high
speed dubbing, set the recording mode to “High”.
• Duration of high speed dubbing will vary depending
on the recording mode or the title amount.
• High speed dubbing is not available when;
- recording mode is set to other than “High”.
- dubbing from a video mode DVD-RW/-R or
DVD+RW/+R disc to the HDD.
- there is not enough space in the disc.
- dubbing a title recorded in EP or SLP mode to
DVD+RW / +R discs.
• High speed dubbing of an HDD title which has
bilingual audio is only available to VR mode
DVD-RW disc.

Connections

You can copy an HDD / DVD disc to a videotape or
copy a videotape to an HDD / DVD disc. This function
will be possible only if the DVD or the videotape is not
copy protected.
Before dubbing, prepare for the recording on the DVDRW / R disc, DVD+RW / +R disc or the videotape. See
pages 37 to 38 (HDD / DVD) or page 93 (VHS).

From

Introduction

Recording Mode for Dubbing

Information on Dubbing

EN

53

E3NG0FD_EN.book Page 54 Wednesday, January 30, 2008 10:37 AM

Before Starting Dubbing
HDD to DVD / DVD to HDD
You can copy the contents between HDD and DVD.
Limitation (DVD to HDD):
• If a copy control signal is detected during
dubbing, the dubbing will be stopped.

One Touch Dubbing
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

VHS
DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
You can start dubbing right away with just one touch.

One Touch Dubbing between HDD and DVD

Preparing for dubbing (HDD to DVD):
• Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
• Discs dubbed with other devices may not be
dubbed.
VHS to HDD / DVD
You can copy the contents of a videotape to HDD or
DVD disc.
Limitation:
• If a copy control signal is detected during
dubbing, the dubbing will be stopped.
• Copy-once programmes which are recorded
directly from the TV can be dubbed to the HDD
and CPRM compatible VR mode DVD-RW.
• Copy-once programmes which are copied from
the HDD / DVD to a videotape cannot be dubbed
further from the videotape to the HDD / DVD.
Limitation (VHS to HDD):
• With VHS to HDD dubbing, the unit recognise
the HDD’s remaining time as the dubbing
duration. The maximum possible duration is 12
hours.
Limitation (VHS to DVD):
• You cannot dub to the finalised Video mode
DVDs.
• You cannot dub to the protected VR mode
DVDs.
Preparing for dubbing:
• Insert a videotape to be dubbed.
Preparing for dubbing (VHS to HDD):
• Make sure there is enough space on the HDD.
Preparing for dubbing (VHS to DVD):
• Insert a recordable DVD.
• Make sure there is enough space on the DVD.
HDD / DVD to VHS
You can copy the contents of the HDD / DVD to a
videotape.
Limitation:
• If a copy control signal is detected during
dubbing, the dubbing will be stopped.
Limitation (DVD to VHS):
• The contents of DVDs made on this unit can be
dubbed. Other discs may not be dubbed.
Preparing for dubbing:
• Insert a recordable videotape with a record tab
intact.
• Make sure that the videotape has enough space
to record the contents.
Preparing for dubbing (DVD to VHS):
• Insert a disc to be dubbed.

54

EN

If you are dubbing a title in the HDD, press [HDD]
first.
If you are dubbing a title in a disc, press [DVD]
first.
During playback of the title you want to dub, press
[DUBBING].
If you are playing back an HDD, HDD to DVD
dubbing will start right away.
If you are playing back a DVD, DVD to HDD
dubbing will start right away.
(HDD to DVD only)
During playback of the title you want to dub, press
[DUBBING HDD M DVD] on the front panel.
HDD to DVD dubbing will start right away.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.

Note
• When dubbing from DVD to HDD, only One Touch
Dubbing will be available for finalised DVD-R, Video
mode DVD-RW or DVD+R.
• The dubbing will start from the beginning of the title
being played back.
• The unit will dub only the title being played back.
• If the title was in the resume stop mode, the dubbing
will start from the beginning to the end of the
resume stopped title.
• When dubbing from HDD to DVD or VR mode DVDRW to HDD, recording mode will automatically be
set to “High” whenever the conditions are met.
(See page 53.)
• If the high speed dubbing is not available, the title
will be dubbed in normal speed with the recording
mode of the title.
• If the title is recorded in other brand's DVD recorder,
the title will be dubbed in normal speed with the
recording mode that you set with [REC MODE].
• If there is not enough space left on the disc for high/
normal speed dubbing with the title’s recording
mode, the title will be dubbed in normal speed with
“Auto” mode. If there is not enough space left on the
disc for normal speed dubbing with SLP mode, the
title will be dubbed in normal speed with SLP mode
until the space of the disc runs out.
• If you press [DUBBING HDD M DVD] on the front
panel in stop mode without selecting any title, the
unit will start dubbing the last title in the Original List
or the Playlist. It will start dubbing the title in the
Original List if the Original List was the last selected
list. It will start dubbing the title in the Playlist if the
Playlist was the last selected list.

E3NG0FD_EN.book Page 55 Wednesday, January 30, 2008 10:37 AM

Selected Title Dubbing
HDD

If you are dubbing a title in the videotape, press
[VCR] first.

Press [PLAY B] to start the playback
of the videotape you want to dub.

2

Press [STOP C] or [PAUSE F] where
you want to start dubbing.

3

Press [DUBBING VCR M DVD] on the
front panel.

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

1
2

DVD+R
DVD+R

DVD-R

VHS

In stop mode, press [SETUP].

Connections

1

Introduction

One Touch Dubbing from VHS to DVD

Select “Dubbing” using [U \ D],
then press [ENTER].
Setup
General Setting

The dubbing will start from there to the end.

Basic Setup

Timer Programming

To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.

Title List
DVD Menu
HDD Menu
Dubbing

Note

DVB Menu

Recording

• When dubbing starts, the video image may be
distorted because of the Digital Tracking function.
This is not a malfunction. Play the videotape until
the image clears up and then start the dubbing.
• Dubbing takes as much time as the playback does.

HDD to DVD / DVD to HDD

One-Title Dubbing between HDD and
DVD
HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
This function lets you select one specific title from the
title list for dubbing.

HDD A DVD
Select “HDD A DVD” using [U \ D],
then press [ENTER].
DVD A HDD
Select “DVD A HDD” using [U \ D],
then press [ENTER].

Playback

3

e.g.) HDD A DVD

Press [TOP MENU].

3

Select“Dubbing” using [U \ D], then
press [ENTER].

HDD
DVD
HDD
VCR
DVD
VCR

Select a desired title to be dubbed
using [U \ D \ L \ P], then press
[ENTER].

e.g.) HDD Original

Select “Yes” using [U \ D], then
press [ENTER].

4

DVD
HDD
VCR
HDD
VCR
DVD

Select “Add” using [U \ D], then
press [ENTER].
HDD

VHS Functions

Resume Playback
Play From Start
Edit
Title Delete
Add To Playlist
Delete Plural Titles
Dubbing

4

Dubbing

Function Setup

1
2

Editing

If you are dubbing a title in the HDD, press [HDD]
first.
If you are dubbing a title in a disc, press [DVD] first.

DVD

3000 MB

Dubbing List
Add
Delete All
Dubbing Start

Start Dubbing?

Others

Yes
No

Dubbing of the selected title will start.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.

1/1

• If you have registered any dubbing before, they
will be listed in the dubbing title list.

EN

55

E3NG0FD_EN.book Page 56 Wednesday, January 30, 2008 10:37 AM

5

Select a desired title using
[U \ D \ L \ P], then press [ENTER].

8

e.g.) HDD A DVD

e.g.) HDD
ORG

Select a desired recording mode
using [L \ P], then press [ENTER].
HDD

Title List

21/ 01/ 08 07:00 22 SP
07:00 (00:30:00)
21/01/08

1

1

22 SP

2

3

Please select REC MODE.
High

4

DVD

5

XP

SP

LP

EP

SLP

Dubbing Titles

6

Auto
500 MB
3000 MB

1/6

The title is now registered in the dubbing list.

6

Confirmation message will appear.
• Depending on the dubbing direction, the
available recording mode varies.
• When dubbing from HDD to DVD, you can select
“High” to perform the high speed dubbing (refer
to “Recording Mode for Dubbing” on page 53 for
more details).

Repeat steps 4 to 5 until you register
all the titles to be dubbed.
e.g.) HDD A DVD
HDD

DVD

9
3000 MB

Add
Delete All
Dubbing Start

Select “Yes” using [U \ D], then
press [ENTER].

Dubbing List
1.01/01/08 0:00 P10 SP

Start Dubbing?
Yes
No

If dubbing continues when timer recording starts,
the next display will appear.
1/1

Timer Recording is in standby.
Start Dubbing?

Yes
No

To delete a title:
1
2
3

Go to the dubbing list, then select a title
using [U \ D]. Then press [ENTER].
Select “Delete” using [U \ D], then press
[ENTER].
Select “Yes” using [U \ D], then press
[ENTER].

To move a title:
1
2
3

Go to the dubbing list, then select a title
using [U \ D]. Then press [ENTER].
Select “Move” using [U \ D], then press
[ENTER].
Select a desired insert point using [U \ D],
then press [ENTER].

Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.

Note
• The device mode change is available only between
HDD and DVD during the videotape to the HDD /
DVD dubbing.
• Dubbing will be cancelled 2 minutes before starting
timer recording.
VHS to HDD / DVD

To erase all the titles in the dubbing title list:
1
2

3

Select “Delete All” in the dubbing menu
using [U \ D], then press [ENTER].
Select “Yes” using [U \ D], then press
[ENTER]. Final confirmation message will
appear.
Select “Yes” using [U \ D], then press
[ENTER].
• To go back and forth between dubbing menu
and dubbing list, use [L \ P].

7

56

EN

After adding all the titles you want,
select “Dubbing Start” in the
dubbing menu using [U \ D], then
press [ENTER].

3

VHS A HDD
Select “VCR A HDD” using [U \ D],
then press [ENTER].
VHS A DVD
Select “VCR A DVD” using [U \ D],
then press [ENTER].

E3NG0FD_EN.book Page 57 Wednesday, January 30, 2008 10:37 AM

e.g.) VCR A HDD

Introduction

HDD / DVD to VHS

Dubbing
HDD
DVD
HDD
VCR
DVD
VCR

DVD
HDD
VCR
HDD
VCR
DVD

4

e.g.) HDD A VCR

e.g.) VCR A HDD
VCR

HDD A VHS
Select “HDD A VCR” using [U \ D],
then press [ENTER].
DVD A VHS
Select “DVD A VCR” using [U \ D],
then press [ENTER].
Dubbing

HDD

HDD
DVD
HDD
VCR
DVD
VCR

Please select REC MODE.
XP

Basic Setup

Select a desired recording mode
using [U \ D], then press [ENTER].

Connections

3

SP

LP

EP

SLP

DVD
HDD
VCR
HDD
VCR
DVD

Recording

143480 MB

Confirmation message will appear.

5

4

HDD

Playback

Select “Yes” using [U \ D], then
press [ENTER].

Select “Add” using [U \ D], then
press [ENTER].
VCR

Start Dubbing?
Yes
No
Dubbing List

If dubbing continues when timer recording starts,
the next display will appear.

Add
Delete All
Dubbing Start

Editing

Timer Recording is in standby.
Start Dubbing?

Yes
No
1/1

Dubbing will start.
• It may take awhile to prepare for the dubbing.

• If you have registered any dubbing before, they
will be listed in the dubbing title list.

5

Function Setup

To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.

Select a desired title using
[U \ D \ L \ P], then press [ENTER].
e.g.) HDD

Note
ORG

Title List

21/ 01/ 08 07:00 22 SP
07:00 (00:30:00)
21/01/08

1

4

1

22 SP

2

3

5

6

VHS Functions

• Dubbing will start where the tape is stopped.
• After starting dubbing, the picture may be distorted
because of the digital tracking function. This is not a
malfunction. Be advised to play back the videotape
until the picture is stabilised, then set the starting
point at which you want to start recording, and start
dubbing.
• Dubbing will be cancelled 2 minutes before starting
timer recording.

1/6

The title is now registered in the dubbing list.

Others

EN

57

E3NG0FD_EN.book Page 58 Wednesday, January 30, 2008 10:37 AM

6

Repeat steps 4 to 5 until you register
all the titles to be dubbed.
e.g.) HDD A VCR
HDD

• Depending on the dubbing direction, the
available recording mode varies.

9

Select “Yes” using [U \ D], then
press [ENTER].

VCR
Start Dubbing?
Yes
No
Dubbing List

If dubbing continues when timer recording starts,
the next display will appear.

1.01/01/08 0:00 P10 SP

Add
Delete All
Dubbing Start

Timer Recording is in standby.
Start Dubbing?

Yes
No
1/1

Dubbing will start.
• It may take awhile to prepare for the dubbing.

To delete a title:
1
2
3

Go to the dubbing list, then select a title
using [U \ D]. Then press [ENTER].
Select “Delete” using [U \ D], then press
[ENTER].
Select “Yes” using [U \ D], then press
[ENTER].

To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.

Note
• Dubbing will be cancelled 2 minutes before starting
timer recording.

To move a title:
1
2
3

Go to the dubbing list, then select a title
using [U \ D]. Then press [ENTER].
Select “Move” using [U \ D], then press
[ENTER].
Select a desired insert point using [U \ D],
then press [ENTER].

VR

DVD-RW
DVD+RW
DVD+R
DVD+R
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using
“Setup” menu.

To erase all the titles in the dubbing title list:

Insert a recordable disc.

1

Select “Delete All” in the dubbing menu
using [U \ D], then press [ENTER].
Select “Yes” using [U \ D], then press
[ENTER]. Final confirmation message will
appear.
Select “Yes” using [U \ D], then press
[ENTER].

1
2

In stop mode, press [SETUP].

3

Select “Disc Protect OFF A ON”
using [U \ D], then press [ENTER].

• To go back and forth between dubbing menu
and dubbing list, use [L \ P].

4

Select “Yes” using [U \ D], then
press [ENTER].

2

3

7

8

5

Select a desired recording mode
using [L \ P], then press [ENTER].

• The Disc Protect setting is available only when a
disc recorded in VR or +VR mode is inserted.
• You can select only “Disc Protect ON A OFF” when
a protected disc is inserted.

HDD

The disc is protected.

Press [SETUP] to exit.

Note

To cancel the disc protect:

VCR

Please select REC MODE.
SP

LP

Confirmation message will appear.
EN

Select “DVD Menu” using [U \ D],
then press [ENTER].

After adding all the titles you want,
select “Dubbing Start” in the
dubbing menu using [U \ D], then
press [ENTER].

e.g.) HDD A VCR

58

Setting a Disc to Protect

• Select “Disc Protect ON A OFF” at step 3, then
select “Yes”.
• If you insert a disc protected with this unit,
“Disc Protect ON A OFF” will appear instead of
“OFF A ON”.

E3NG0FD_EN.book Page 59 Wednesday, January 30, 2008 10:37 AM

Finalising Discs
Video

VR

DVD-RW

DVD-RW

DVD-R

DVD+R
DVD+RW
VD+RW
W

In stop mode, press [SETUP].
Select “DVD Menu” using [U \ D],
then press [ENTER].
Select “Finalise” using [U \ D], then
press [ENTER].

4

Select “Yes” using [U \ D], then
press [ENTER].
e.g.) VR mode DVD-RW disc

Note
• If you insert a DVD-RW disc finalised with this unit,
“Undo Finalise” will appear instead of “Finalise”.
• DO NOT power off during finalising. This may result
in a malfunction.

Recording

3

Basic Setup

Insert a recordable disc before
finalising.

Connections

DVD+R
DVD+R
You will need to finalise discs to play them back in
other units.
Finalising may take from several minutes up to an
hour.
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.

1
2

Introduction

Hint
• Finalising a disc in Video mode and +VR mode
automatically creates a Title menu.
• After you finalise the DVD+RW disc, you can call up
the title list by pressing [TOP MENU], or you can call
up the Title menu by pressing [DISC MENU].
• Even after DVD+RW disc is finalised, you can still
record or edit. After you finalise DVD-RW/-R or
DVD+R disc, you cannot edit or record anything else
on that disc.
• To release the finalisation of the disc, select “Undo
Finalise” at step 3.
• To release the finalisation of the DVD+RW disc,
make an additional recording to the disc.
• For DVD+RW disc, if you have added or deleted
chapters, or made chapters hidden, you must
finalise the disc before being able to see those
effects on other units. To play back discs other than
DVD+RW disc in other DVD players, you will need to
finalise.

Auto Finalise
Video

Finalise disc?
Yes
No

Finalising will start.

To cancel finalising (DVD-RW disc only):
At step 4, press [STOP C]. Select “Yes” using
[U \ D], then press [ENTER]. Finalising is
cancelled and the unit switches to stop mode.

2

Select “Recording” using [U \ D],
then press [ENTER].

3

Select “Auto Finalise” using [U \ D],
then press [ENTER].

4

Select “ON” using [U \ D], then
press [ENTER].

Function Setup

In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

Editing

Do you want to cancel?
Yes
No

1

Playback

DVD-RW
DVD-R
DVD+R
DVD+R
You can finalise discs automatically when the disc
space runs out if you set this in “Setup” menu.

Auto Finalise
Finalising

10%

If “No” is selected and [ENTER] or [RETURN] is
pressed, finalising is continued.

5

Press [SETUP] to exit.

VHS Functions

If “ ” appears when [STOP C] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.

ON
OFF

Note
• Auto finalise function is not available for discs
formatted in VR mode or a DVD+RW disc.

You cannot cancel finalising a DVD-R and
DVD+RW/+R disc once it has started.

5

Finalising is complete.
Others

EN

59

E3NG0FD_EN.book Page 60 Wednesday, January 30, 2008 10:37 AM

Playback
6
Basic Playback

Pop up window will appear.

7

Hint for HDD / DVD Playback
The contents of an HDD / DVD are generally divided
into titles. Titles are sometimes further subdivided into
chapters.
Start Rec.

Select the desired title using
[U \ D \ L \ P], then press [ENTER].

Stop/Start

Title 1

Stop Rec.

Select “Play From Start” using
[U \ D], then press [ENTER].
Playback will start.
For title in the HDD, you can also select “Resume
Playback” to play from the resume points.

8

Press [STOP C] to stop playback.
To eject the disc, press [OPEN\CLOSE A] to
open the disc tray, then remove the disc. Press
[OPEN\CLOSE A] to close the disc tray before
turning off the unit.

Title 2

Hint
Chapter 1 Chapter 2 Chapter 3

Chapter 1 Chapter 2

Playing Back an HDD / DVD-RW /
DVD-R / DVD+RW / DVD+R Disc
HDD
DVD+R
DVD+RW
VD+RW
W

1

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R

DVD+R
DVD+R

Press [B ON\STANDBY] to turn on
the unit.

• For DVD-R (Video mode), DVD-RW (Video mode)
and DVD+R discs that are already finalised, a Title
menu will be displayed instead of thumbnails.
• After you finalise the DVD+RW, you can call up the
Title list by pressing [TOP MENU], or you can call
up the title menu by pressing [DISC MENU].
• You can resume playback from where you stopped
playing back the disc (Resume playback).
See page 66 for details.
• You can also start playback by pressing [PLAY B]
instead of [ENTER] at steps 6 and 7.

Note
• Some discs may start playback automatically.

Turn on the TV and be sure to select the input to
which the unit is connected.
If you are playing back the titles in HDD, press
[HDD] first, then proceed to step 5.
If you are playing back the titles in DVD, press
[DVD] first.

Playing Back a DVD-V / Video CD
(without PBC Function)

2

Press [OPEN\CLOSE A] to open the
disc tray.

1

3

Place the disc on the disc tray with
its label facing up. Be sure to align
the disc with the disc tray guide.

Follow steps 1 to 4 in “Playing Back
an HDD / DVD-RW / DVD-R / DVD+RW
/ DVD+R Disc”.

2

Press [PLAY B] to start playback.

DVD-V

VCD

Playback will start.
If you are playing back a DVD-Video, a menu may
appear.
See pages 64 - 65 for details.

Disc tray guide

3

Press [STOP C] to stop playback.

Note

4

Press [OPEN\CLOSE A] to close the
disc tray.

5

Press [TOP MENU] to display the
Title list.
You can switch between the “Original” and
“Playlist” in the HDD or VR mode DVD-RW disc
using [DISC MENU].

60

EN

• Some discs may start playback automatically.
• For playing back a Video CD with PBC function, see
page 65.

E3NG0FD_EN.book Page 61 Wednesday, January 30, 2008 10:37 AM

CD

1

MP3

JPEG

[JPEG] Size of picture
• Upper limit
: 6,300 x 5,100 dots
• Lower limit
: 32 x 32 dots
• Capacity limit
: less than 12 MB

DISC NAME

JPEG file1
JPEG file2
MP3 file 1
MP3 file 2
MP3 file 3
MP3 file 4
1/ 2

Press [U \ D] to select the desired
folder or track / file, then press
[ENTER].

Notes on JPEG:
After file is displayed for 5 seconds or 10 seconds (set
in the “Slide Show” on page 73), the display moves to
the next file.
During JPEG playback, press [P] or [L] to rotate a
picture 90 degrees clockwise or counterclockwise
respectively. (Not available when the display menu
appears.)

Playing Back a DivX®

If a track / file is selected:
Playback will start.

®

1

Follow steps 1 to 4 in “Playing Back
an HDD / DVD-RW / DVD-R / DVD+RW
/ DVD+R Disc” on page 60.
The “File List” will appear.
File List
DISC NAME

Editing

Folder1
Folder2
1 DivX File1
2 DivX File2

Function Setup

1/ 1

To exit the File List, press [TOP MENU] or press
[STOP C].
To resume the File List, press [TOP MENU].

2

Press [U \ D] to select the desired
folder or file, then press [ENTER].

VHS Functions

If a file is selected:
Playback will start.
If a folder is selected:
The files in the folder will appear.
Press [U \ D] to select the file or folder you want,
then press [ENTER].
• Press [PLAY B], [ENTER] or [P] to move to
any lower folders.
• Press [L] or [RETURN] to move back to the
folder above.

EN

Others

Hints for Audio CD tracks and MP3 / JPEG
files:
• Folders are shown with the
icon.
• Audio CD tracks are shown by
.
• MP3 files are shown with the
icon.
Playback will start from the selected track and
continue with each one after.
• JPEG files are shown with the
icon.
• The unit can recognise up to 255 folders and up
to 99 tracks / 999 files.
• Letters of a file / folder name overflowing the
given space will be displayed as “...”.
• Unplayable folders and tracks / files may be
displayed depending on the recording
conditions.
• For MP3 file recorded in Variable Bit Rate
(VBR), the unit may not display the actual
elapsed time.
• If there are no files in the folder, “No Files” is
displayed.
• High resolution or large-size JPEG files take a
few moments to be displayed.
• It is not possible to play back progressive
JPEGs (JPEG files saved in progressive format)
on this unit.
• It is not possible to play back JPEG files of 12
MB or more.

DivX

Playback

If a folder is selected:
The files in the folder will appear.
Press [U \ D] to select the folder you want, then
press [ENTER].
• Press [PLAY B], [ENTER] or [P] to move to
any lower folders.
• Press [L] or [RETURN] to move back to the
folder above.

Recording

To exit the File List, press [TOP MENU] or press
[STOP C].
To resume the File List, press [TOP MENU].

Basic Setup

• MP3 files cannot be recorded as digital sound using
an MD or DAT deck.
• Files with extensions other than “.mp3 (MP3)” or
“.jpg / .jpeg (JPEG)” will not be listed in the File List.
• Some folders or tracks listed in the File List may be
unplayable due to their recording status.
• The File List displays only up to 8 folders and file
names.

File List

2

: 44.1 kHz or 48 kHz
: 112 kbps to 320 kbps

Note

The “File List” will appear.

A
B
1
2
3
4
5
6

[MP3]
• Sampling frequency
• Constant Bit Rate

Connections

Follow steps 1 to 4 in “Playing Back
an HDD / DVD-RW / DVD-R / DVD+RW
/ DVD+R Disc” on page 60.

It is recommended that files to be played back in
this unit are recorded under the following
specifications:

Introduction

Playing Back an Audio CD, MP3 or
JPEG

61

E3NG0FD_EN.book Page 62 Wednesday, January 30, 2008 10:37 AM

DivX® Subtitle

DivX® VOD

The subtitle created by the user can be displayed
during DivX® playback.

1

After the DivX® file is selected,
“Subtitle List” will appear.
Subtitle List
DivX File1
OFF
SMI
SRT
SUB
ASS
SSA
TXT

2

Select the desired extension you
want to display using [U \ D], then
press [ENTER]. DivX® with the
subtitle starts playback. The subtitle
cannot be displayed when the
setting is “OFF”.

DivX

®

This unit allows you to play back the files purchased
or rented from DivX® Video-On-Demand (VOD)
services. The files are available on the internet.
When you purchase or rent DivX® VOD files on the
internet, you will be asked to enter a registration
code. This menu item provides you with the
registration code.

1
2

Press [SETUP].

3

Select “DivX” using [U \ D], then
press [ENTER].

4

Select “DivX® VOD” using [U \ D],
then press [ENTER].

Select “General Setting” using
[U \ D], then press [ENTER].

General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

• If there is more than one extension, the
extension selection will appear in “Subtitle
List”.

Note
• “DivX Subtitle” must be activated in the DivX Menu.
(Refer to “DivX Subtitle” on page 91.)
• Playback file and the subtitle file must have the
same name.
• Playback file and the subtitle file must locate in the
same folder.
• Only the subtitle files with the following extensions
are supported; .smi (.SMI), .srt (.SRT), .sub
(.SUB), .ass (.ASS), .ssa (.SSA), .txt (.TXT). (.sub
(.SUB) and .txt (.TXT) files may not be recognised.)
• The subtitles that exceed the playback time of the
DivX® file will not be displayed.

DivX® VOD
DivX Subtitle

Your registration code will appear.
DivX® VOD
Your registration code is:

To learn more visit:
www.divx.com/vod

Note
• One registration code is only valid for one
DivX® VOD file.
• You must first download the file from the internet
and play it back on this unit before you are able to
get another code.
• You must follow this step every time you purchase
or rent a DivX® VOD file from the internet.
• For more information for DivX®, please visit
http://www.divx.com/vod.

62

EN

E3NG0FD_EN.book Page 63 Wednesday, January 30, 2008 10:37 AM

Yes

No

Rental Expired

VHS Functions

This rental is expired.
Please push ‘TOP MENU’.

Function Setup

• You cannot play back the DivX® VOD files of which
rental period has been expired. In such case, press
[TOP MENU] and select other files that can be
played back.

Editing

This rental has O views left.
Do you want to use one
of your O views now?

Playback

DivX® VOD Rental

Recording

Use [L \ P] to select “Yes” if you want to play back
the file, or to select “No” if you do not want to play it
back. Then press [ENTER] to confirm the selection.

Basic Setup

Hint for the purchased or rental official DivX®
Certified product
• When you purchased or rental a DivX® file through
the official site of DivX® Video which is called DivX®
Video-On-Demand (VOD) services, a registration
code is required every time you get the new file from
the DivX® VOD services. Refer to “DivX® VOD” on
page 62.
• Some DivX® VOD files are restricted with the limited
playable times (you cannot play them back beyond
the limit). If your DivX® VOD file has such limit, the
playback confirmation screen will appear.

Hint
• DivX® is a codec (compression/decompression) that
can compress images to a very small amount of
data. The software can compress video data from
almost any sources to the size that can be sent on
the Internet without compromising visual quality of
the images.
• A file with an extension of “.avi” and “.divx” is called
an DivX® file. All files with the “.avi” extension are
recognised as MPEG4.
• Files whose extension other than “.avi” and “.divx”
will not be listed on the DivX® menu. However,
unplayable groups or tracks may be displayed,
depending on the recording conditions.
• Even if the file has an extension of either “.avi” and
“.divx”, this unit cannot play it back if it is recorded in
the format other than DivX®.
• Folders are known as Groups; files are known as
tracks.
• A symbol of
is shown on the top of the file name.
• A maximum of 255 folders or 999 files may be
recognised in one disc.
• Up to 8 hierarchies can be recognised in one folder.
Files in the 9th or deeper hierarchies cannot be
played back.
• If the track extends beyond the scope of screen, a
down arrow “ ” appears, indicating that the user
can view another part on the next page. The current
page number and the number of total pages are
shown on the right of the down arrow “ ”.
• Letters of a file / folder name overflowing the given
space will be displayed as “...”.
• You can play back the disc recorded in multisession.
• It may take awhile for audio and images to be output
after you inserted a disc and pressed [PLAY B].
• When playing back the files recorded in high bit
rates, the images can be interrupted in some
occasions.
• Although DivX® logo has been obtained for this unit,
it may not be able to play back some data,
depending on the characteristics, bit rates, or audio
format settings, etc.
• Use the software recognised by the DivX, Inc. when
you make DivX® files.
• A DivX® file whose file size exceeds 2 GB cannot be
played back.
• If you try to play back the DivX® file that has the
screen resolution which this unit does not support,
the playback will be stopped and error message will
appear.
• If a large-sized DivX® file is selected, it may take
awhile to start the playback (over 20 seconds
sometimes).
• If DivX® files written on CD discs cannot be played
back, rewrite them on a DVD disc and try to play
back.
• For more information for DivX®, please visit
http://www.divx.com.

Connections

[DivX®]
• Official DivX® Certified product
• Playable Codec of AVI files
: DivX®3.x,
DivX®4.x,
DivX®5.x,
DivX®6.x
• Maximum size of image
: 720 x 480 @30 fps
720 x 576 @25 fps
• Sampling frequency of audio : 8 kHz - 48 kHz
• Audio type
: MPEG1 audio layer
3 (MP3), MPEG1
audio layer 2,
Dolby Digital

Introduction

It is recommended that files to be played back in
this unit are recorded under the following
specifications:

Others

EN

63

E3NG0FD_EN.book Page 64 Wednesday, January 30, 2008 10:37 AM

• If you insert a CD-RW/-R with DivX® files that are
mixed with MP3 and JPEG files, the Playback Media
Selection screen will be displayed. Please select
“Video” and proceed to next step.

Please select the media
to play back.
Video
Audio & Picture

Playing Back Discs Using the Disc
Menu
DVD-V
A DVD contains a disc menu, which lists the contents
and enables you to customise playback. The menu
may offer choices for subtitle languages, special
features, and chapter selection. Usually this
information appears automatically when you start
playback, but sometimes you need to press
[DISC MENU] to display the menu.

1
• Press [DISC MENU] to call up the Playback Media
Selection screen in stop mode.
• If you select “Audio & Picture” instead of “Video” on
the Playback Media Selection screen, this unit can
play back MP3/JPEG files.
• You cannot play back the DivX® VOD files obtained
with different registration codes on this unit. Press
[TOP MENU] and select other files that can be
played back.
• This unit does not support the DivX® file with UDF
format.

Press [DISC MENU].
If the feature is not available, “
the TV screen.

2

” may appear on

Select an item using [U \ D \ L \ P],
then press [ENTER].
Repeat this step until all the features you want are
set up or to start playing back the disc from the
menu. The following operations are available.
[DISC MENU] button:
Displays the disc menu, which will vary among
discs, and may be same with the Title menu.
[U \ D \ L \ P] buttons:
Move the cursor from item to item on the screen.
[ENTER] button:
Selects the currently highlighted menu option.

Authorization Error

[the Number buttons]:
Selects a numbered menu option (available on
certain discs).

This player is not authorized to
play this video.
Please push ‘TOP MENU’.

3

Press [DISC MENU] to exit the disc
menu.

Note
• Menus vary among discs. Refer to the information
accompanying the disc for details.

64

EN

E3NG0FD_EN.book Page 65 Wednesday, January 30, 2008 10:37 AM

Video

DVD-V

DVD-R
DVD-RW
VD-RW
W

DVD-R

DVD+R
DVD+RW
VD+RW
W

On this unit, if you finalise video mode or +VR mode
discs, a Title Menu will be created automatically.

1

Press [TOP MENU].

If the feature is not available, “
the TV screen.

2

” may appear on

The disc will start playing back at the title you
selected. The following operations are available.
[TOP MENU] button:
Displays the DVD “Title Menu” which will vary
between discs.

[ENTER] button:
Selects the currently highlighted menu option.
[the Number buttons]:
Selects a numbered menu option (available on
certain discs).

3

Press [TOP MENU] to exit.

Note
• Some operations cannot be performed unless the
function is cancelled either automatically or
intentionally by you.
• Operations that are not available when the PBC
function is set to “ON” are indicated by the following
symbol in this manual:
VCD
(PBC OFF)

Playing Back a Video CD Using the
Title Menu
VCD

When playing back a Video CD with
the PBC function, the Title Menu will
appear automatically.

2

Press [the Number buttons] to select
the desired title.

Editing

1

Note

Function Setup

• [TOP MENU] will not be available for some DVDs.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• For DVD+RW discs finalised on this unit, press
[DISC MENU] to display the Title Menu.

Playback

[U \ D \ L \ P] buttons:
Move the cursor from item to item on the screen.

Hint
• When playing back Video CDs with the PBC
function, “Pbc” is displayed instead of the playing
back time and current track indications on the front
panel display.

Recording

Select a desired item using
[U \ D \ L \ P], then press [ENTER].

VCD
This unit conforms to ver.1.1 and ver.2.0 of the Video
CD standard playback control (PBC) function. This
enables you to play back interactive software using
menu screens. Refer to the information
accompanying the Video CD.
Ver.1.1 (without PBC function): You can still enjoy
playback of pictures and music from the CD.
Ver.2.0 (with PBC function): “Pbc” will appear on the
screen and display when playing back a Video CD
with the PBC function.

Basic Setup

The Title Menu will appear.
• For some discs, the Title Menu appears
automatically.

PBC Function for Video CDs

Connections

DVD+R
DVD+R
Some DVDs have a Title menu, which lists the titles
available on the DVD. You can start playing back such
discs at a specific title.

Introduction

Playing Back a Disc Using the Title
Menu

Playback will start at the selected title.

3

Press [RETURN] to go back to the
Title menu.

Note

VHS Functions

• While the On-Screen Display appears, you cannot
perform steps 2 and 3.

Others

EN

65

E3NG0FD_EN.book Page 66 Wednesday, January 30, 2008 10:37 AM

Cancelling and Recalling the PBC
Function

Special Playback
Resume Playback

VCD
(PBC OFF)

Insert a Video CD.

1
2

In stop mode, press [SETUP].

3

Select “PBC (Video CD only)” using
[U \ D], then press [ENTER].

HDD
DVD-R

DVD-V
DVD-V

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

DVD+R
DVD+R

CD

VCD
(PBC OFF)

Select “CD Playback Mode” using
[U \ D], then press [ENTER].

CD Playback Mode

MP3

JPEG

DivX

®

You can resume playback from the point where you
stopped it before.

1

During playback, press [STOP C].
The resume message will appear.

Random Play
Programme Play
PBC (Video CD only)
Slide Show

4

Select “OFF” using [U \ D], then
press [ENTER].

5

Press [SETUP] to exit.
To recall the PBC function, select “ON” at step 4
above.

Note
• The default setting of “PBC (Video CD only)” is
“ON”.

2

Press [PLAY B].
In a few seconds, playback will resume from the
point at which you stopped it before. Even if you
turn off the unit, you can resume playback at the
same point after turning back on the unit.
For title in the HDD, you can also play from the
resume point by selecting “Resume Playback” at
step 7 of “Playing Back an HDD / DVD-RW / DVD-R
/ DVD+RW / DVD+R Disc” on page 60.

To cancel the resume playback and start playing
back the disc from the beginning:
Press [STOP C] while playback is stopped.
For HDD:
You can set a resume point per every title.
For DVD-Videos, DVD+RW/+R, DVD-RW/-R, Video
CD, Audio CD, MP3 files, JPEG files, and DivX®
files:
You can set only one resume point per disc.

Note
• For Video CDs, if you turn PBC on using “Setup”
menu, the resume function is cancelled.
• For MP3 and JPEG files, playback will resume from
the beginning of the track at which playback was
stopped.

66

EN

E3NG0FD_EN.book Page 67 Wednesday, January 30, 2008 10:37 AM

HDD

DVD-V
DVD-V

DVD-R
MP3

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+R

CD

HDD

DivX

MP3

®

During playback, press [FWD D] or
[REV E].

FWD

REV

FWD

20x

REV

FWD

5x

REV

FWD

Normal
speed
playback

REV

FWD

2x

REV

1

REV

2

DVD-RW

DVD-V
DVD-V
DVD+R
DVD+RW
VD+RW
W

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+R

Rapid Playback function is available
only during playback.
Available only on discs recorded in the Dolby Digital
format, Rapid Playback plays back in a slightly faster/
slower speed while keeping the sound output.

1

During playback, press
[1.3x\0.8x PLAY].
Bx0.8 : Press [1.3x\0.8x PLAY] once during
playback.
Plays back approximately at 0.8 times of
normal playback.
Bx1.3 : Press [1.3x\0.8x PLAY] twice during
playback.
Plays back approximately at 1.3 times of
normal playback.
B
: Press [1.3x\0.8x PLAY] thrice to play
back in normal speed.
No effects.

2

Press [PLAY B] to resume playback.

Note
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during Rapid Playback mode.
• When you select “PAL” in “TV System” (see page
88), this function is not available with discs recorded
using the NTSC system.

Function Setup

DVD-R
DVD-RW
VD-RW
W

DVD+R
DVD+R

®

Editing

DVD+R
DVD+RW
VD+RW
W
VR

DivX

Playback

DVD-V
DVD-V

Video

VCD

Recording

HDD

CD

Press [PLAY B] to resume playback.

DVD-R

Hint

Variable Skip / Variable Replay

JPEG

DVD+R
DVD+R

Rapid Playback

40x

• Forward / reverse speeds are indicated with icons as
follows.
Forward (Approx. Speed):
2x:
20x:
40x:
Reverse (Approx. Speed):
5x:
20x:
40x:

DVD+R
DVD+RW
VD+RW
W

During playback, press [PAUSE F].

HDD

• For Audio CDs and MP3 files approximate
speed is fixed at 8x with sound.
• For Video CDs, approximate forward / reverse
speeds are 2x, 8x and 16x.
• For DivX® files, approximate forward speeds are
2x, 20x and 40x, and approximate reverse
speeds are 5x, 20x and 40x.
• To return to playback at normal speed, press
[PLAY B].
• Picture quality of DivX® files in fast reverse is
lower than that in fast forward.
• For some DivX® files, Fast forward/Fast reverse
may not function.

VR

DVD-RW

Playback will pause with the sound muted.

FWD

20x

Video

DVD-R
DVD-RW
VD-RW
W

Basic Setup

Each time you press [FWD D] or [REV E], the
approximate speed will change as follows.
Fast forward or fast reverse playback across titles
(for DVDs) or tracks / files (for Video CD / MP3 /
DivX®) is not possible.

40x

DVD-R

VCD

DVD-V
DVD-V

Connections

1

Pause

Video

DVD+R
DVD+RW
VD+RW
W

Introduction

Fast Forward / Fast Reverse

DVD-R

VHS Functions

During playback, you can skip forward or backward by
the amount of time you set in “Playback” menu. To set
the time amount, refer to “8. Variable Skip / Replay”
on page 88.
During playback, press [VARIABLE SKIP] if you
want to skip forward. Press [VARIABLE REPLAY]
if you want to skip backward.

Others

EN

67

E3NG0FD_EN.book Page 68 Wednesday, January 30, 2008 10:37 AM

Step by Step Playback
HDD

DVD-V
DVD-V

DVD-R

1
2

Zoom

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

DVD+R
DVD+R

VCD

DVD-V
DVD-V

HDD
DVD-R

DivX

®

JPEG

During playback, press [PAUSE F].
Press [SKIP H \ G] repeatedly.
Each time you press [SKIP G], playback will go
forward one frame (or step) at a time with the
sound muted.
To go backward one frame (or step), press
[SKIP H].

1
2

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

DVD+R
DVD+R

VCD

DivX

®

During playback, press [DISPLAY].
Select the
icon using [L \ P],
then press [ENTER].
T

1/ 5 C

1/ 5

0:01:00 / 1:23:45
DVD Video

Press and hold [SKIP G] to continue going
forward.
To continue going backward, press and hold
[SKIP H].

3

x1.2
x1.5
x2.0

Note
• Only step by step forward is available when playing
back Video CDs and discs with DivX® files.

Slow Forward /
Slow Reverse Playback
DVD-V
DVD-V

HDD
DVD-R

DVD+R
DVD+RW
VD+RW
W

4

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+R

VCD

Each time you press [FWD D] or [REV E], the
approximate speed changes as follows.
(The sound will remain muted.)
FWD

FWD

1/8x

REV

FWD

1/16x

REV

FWD

Pause

REV

FWD

1/16x

REV

FWD

1/8x

REV

1/3x

To return to normal playback, press [PLAY B].

Hint
• Forward / reverse speeds are indicated with icons as
follows.
Forward (Approx. Speed):
1/16x:
1/8x:
1/3x:
Reverse (Approx. Speed):
1/16x:
1/8x:
1/4x:

Note
• For some DivX® files, Slow forward may not function.
• Only slow forward is available when playing back
Video CDs and discs with DivX® files.

68

EN

Select the desired zoom position
using [U \ D \ L \ P], then press
[ENTER].

Hint

During playback, press [PAUSE F],
then press [FWD D] or [REV E].

REV

Select the desired zoom factor to
zoom using [U \ D], then press
[ENTER].

Zoom playback will start.

®

1/4x

3

The zoom area is displayed.

DivX

1

Four options are available, “x1.0”, “x1.2”, “x1.5”
and “x2.0”. These are displayed excluding the
current zoom rate.

Press [PLAY B] to resume playback.

• To cancel the zoom function, select “x1.0” using
[U \ D], then press [ENTER].

Note
• If selecting a smaller factor than that currently
selected, the zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG
files.

E3NG0FD_EN.book Page 69 Wednesday, January 30, 2008 10:37 AM

Chasing Playback during Recording

DVD-V
DVD-V

HDD
DVD-R

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

DVD+R
DVD+R

CD

HDD
VCD

(PBC OFF)

You can play back a title being recorded from the
beginning while recording continues.

1

Playback of the title you are recording will start
from the beginning.
• Elapsed playback time will be displayed on the
front panel display.

During playback, press [DISPLAY].

2

The front panel display will switch back to show
the elapsed recording time.
If you press [STOP C] twice, it will stop the
recording.

e.g.) Marker setup menu for DVD-Video
T

1/ 5 C

1/ 5

0:01:00 / 1:23:45
DVD Video

1
2
3
4

6

3

With [TIME SLIP], even if you leave your couch while
you are watching TV through this unit, you can come
back and watch the rest of the programme right from
where you left at any the convenient time with just one
button.

1

The title (track) number and the time are
displayed.

4

Hint

2

When you come back, press
[TIME SLIP] again.

3

Function Setup

The pause will be cancelled, and the playback will
start from the point where the image is paused in
step 1.
• While viewing the recorded content, you can
pause and resume the playback by pressing
[TIME SLIP].

Note

Press [STOP C] once to resume live
TV.
Press [STOP C] twice to stop the
recording.

VHS Functions

• All markers are erased when you perform the
following operations.
- Opening the disc tray (CD/DVD only)
- Turning off the power (CD/DVD only)
- Making additional recording on the disc (DVD only)
- Editing any title (DVD only)
- Dividing the title (HDD only)
- Deleting a scene of the title (HDD only)
- Changing the mode between Original and Playlist.
(VR mode DVD-RW disc only)
• Marker setting is not available when you play back
the Video CD with PBC function.

Editing

Unless the unit is in HDD recording mode, the unit
will start recording the TV broadcast with the first
press. With the second press, or the first press
when the unit is in HDD recording mode, the
image will be paused while the recording
continues. (It is as if you have paused the live TV
broadcast.)

To return to the marker, select the
desired marker number using
[U \ D], then press [ENTER].

• To clear a marker, select the marker number you
want to clear, then press [CLEAR].
• You can mark up to 6 points.

When you leave the TV, press
[TIME SLIP] twice. (When you are
recording the TV programme to HDD,
press once.)

Playback

Select the desired marker number
using [U \ D]. When the disc
reaches the desired point, press
[ENTER].

Using the [TIME SLIP] button
Recording

5

-------------

To stop the playback, press
[STOP C] once.

Basic Setup

Select the
icon using [L \ P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
marker list.

During recording, press [PLAY B].

Connections

You can assign a specific point on a disc to return
later.

1
2

Introduction

Marker Setup

Others

EN

69

E3NG0FD_EN.book Page 70 Wednesday, January 30, 2008 10:37 AM

Note
• [TIME SLIP] is not available during DVD recordings.
• If you press [TIME SLIP] when the unit is in DVD
mode, the output mode will automatically be
switched to HDD, and the unit will start chasing
playback of the title being recorded.
• You can also use the special playback functions
such as [REV E], [FWD D] etc. during chasing
playback mode.
• The programs you recorded with [TIME SLIP] will
be stored in the title list.
• [REC I] is invalid during chasing playback.
• You can no longer fast forward the playback when it
comes to a few seconds before the current recording
point.

Search
Title / Chapter Search
HDD
DVD-R

To playback a title being recorded while
continuing to record, refer to “Chasing Playback
during Recording” on page 69 (available only with
HDD).

Note
• Video CD, Audio CD, MP3/JPEG files recorded on a
disc and DivX® files can also be played back during
HDD recording.

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

DVD+R
DVD+R

Using [SKIP H \ G] buttons

1

Simultaneous Playback and
Recording
HDD
With regard to HDD, you can continue recording a
programme while playing back another title in the
same component (HDD).
To do so, press [TOP MENU] during recording and
select a title you like to play back, and then press
[PLAY B].
(You can also start the playback from the title list
menu.)

DVD-V
DVD-V

During playback, press [SKIP G] to
skip the current title or chapter and
move to the next.
The unit moves to the next title or chapter one
after another.
To go back to the previous title or chapter, press
[SKIP H] twice in quick successions.

Note
• With regard to HDD, chapter search using
[SKIP H \ G] is available only within the same
title.

Using the [DISPLAY] button

1
2

During playback, press [DISPLAY].
Select the
icon using [L \ P],
then press [ENTER].
for the title number is highlighted.

Searching for a Title:

3

Enter the desired title number to
search for using [U \ D] or
[the Number buttons], then press
[ENTER].
Title search will start.

Hint
• Total number of chapters and playback time of the
selected title are also displayed.
Searching for a Chapter:

3

Press [L \ P] to highlight the number
displayed in the right side of the
icon.

4

Enter the desired chapter number to
search for using [U \ D] or
[the Number buttons], then press
[ENTER] .
Chapter search will start.

Hint
• The title number and playback time of the selected
chapter are also displayed.

70

EN

E3NG0FD_EN.book Page 71 Wednesday, January 30, 2008 10:37 AM

CD

VCD

Introduction

Track Search

Time Search
MP3

JPEG

DivX

®

HDD

DVD-V
DVD-V

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

(PBC OFF)

DVD-R

1

VCD

During playback, press [SKIP G] to
skip the current track and move to
the next.

Using the [DISPLAY] button
For audio CD, skip to step 2.

1
2

During playback, press [DISPLAY].

for the track number is highlighted.

3

Enter the desired track number to
search for using [U \ D] or
[the Number buttons], then press
[ENTER].

DivX

(PBC OFF)

For audio CD, skip to step 2.

1
2

During playback, press [DISPLAY].
Select the
icon using [L \ P],
then press [ENTER].
for the title or track number is highlighted.

3
4

Press [L \ P] to highlight

.

Enter the desired time to search for
using [U \ D] or
[the Number buttons], then press
[ENTER].
Time search will start.

Note
• During Random playback or Programme playback,
you cannot search the desired time.
• The title number and chapter number of the setting
time are also displayed.
• Time search function is available only in the same
track or title.

Playback

Track search will start.

CD

Recording

Select the
icon using [L \ P],
then press [ENTER].

DVD+R
DVD+R

®

Basic Setup

The unit moves to the next track one after
another.
To go back to the previous track, press [SKIP H]
twice in quick successions. The unit moves
backward one track at a time.

DVD+R
DVD+RW
VD+RW
W

Connections

Using [SKIP H \ G] buttons

Hint
• For Video CDs, you can perform the track search
function in stop mode without turning PBC off
manually.

Note
Editing

• During Random playback or Programme playback,
you cannot search the desired track.

Direct Search

Function Setup

CD
You can search the desired track directly.

Using [the Number buttons]

1

VHS Functions

During playback, if the display menu
is not displayed, press
[the Number buttons] to enter the
desired track number.

Note
• During Random playback or Programme playback,
you cannot search the desired track directly.

Others

EN

71

E3NG0FD_EN.book Page 72 Wednesday, January 30, 2008 10:37 AM

Repeat / Random / Programme
Playback / Slide Show
Repeat Playback
HDD
DVD-R

DVD-V
DVD-V

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+RW
VD+RW
W

DVD+R
DVD+R

VCD

CD

Note
• Point B for the repeat A-B playback should be set
within the same title or track as point B.
• You cannot select “Group” during the random
playback of MP3 and JPEG files.
• Chapter / Track repeat will be cancelled whenever a
Chapter / Track is skipped forward or backward.
• For some DivX® files, A-B Repeat playback may not
function.
• For Video CDs with PBC function, repeat playback
does not work while the PBC function is on.

(PBC OFF)

MP3

JPEG

DivX

®

Random Playback

For audio CD or MP3, skip to step 2.

1
2

3

CD

Select the
icon using [L \ P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
selection menu.
Select the desired option to repeat
using [U \ D], then press [ENTER].
The selected repeat playback will start.
The following operations are available.
Title:
The current title will be played back repeatedly.
(HDD, DVD only)
Chapter:
The current chapter will be played back
repeatedly. (HDD, DVD only)
All:
The current disc will be played back repeatedly.
(DVD-RW (VR mode), Audio CD, Video CD, MP3,
JPEG and DivX® only)
A-B:
The A-B point will be played back repeatedly.
(HDD, DVD, Audio CD, Video CD and DivX® only)
When pressing [ENTER] while A-B is highlighted,
A-B repeat is set.
• Press [ENTER] again to decide the starting
point (A).
• Press [ENTER] after setting point (A) to select
the ending point (B).
Track:
The current track will be played back repeatedly.
(Audio CD, Video CD, MP3, JPEG and DivX®
only)
Group:
The current group will be played back
repeatedly. (MP3, JPEG and DivX® only)

72

EN

MP3

JPEG

You can use this function to play back a disc randomly
instead of in the recorded order.

1
2

In stop mode, press [SETUP].
Select “CD Playback Mode” using
[U \ D], then press [ENTER].
“CD Playback Mode” menu will appear.

3

Select “Random Play” using
[U \ D], then press [ENTER].
Random playback will start.

Hint
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
screen.
• For Video CDs with PBC function, the PBC setting
will be switched to off automatically when you start
random playback.

Note
• During random playback, if you forward the track to
the end, the playback speed of the next track will be
normal.
• During random playback, you cannot use the search
function except for the search with [SKIP H \ G].
By pressing [SKIP H], you can return only to the
beginning of the current track.

Programme Playback
CD

VCD
(PBC OFF)

You can programme the disc to play back in your
desired order.

1

Follow steps 1 to 2 in “Random
Playback” on this page.

2

Select “Programme Play” using
[U \ D], then press [ENTER].

Hint
• To cancel the repeat playback, select “OFF” at step
3. The repeat setting is also cancelled when you
stop playback.

VCD
(PBC OFF)

During playback, press [DISPLAY].

E3NG0FD_EN.book Page 73 Wednesday, January 30, 2008 10:37 AM

Select the desired track using
[U \ D], then press [ENTER] or [P].
CD Playback Mode
Programme Play
--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Selecting the Format of Audio
and Video
You can select the format of audio and video to suit
the content of the disc you are playing back.

Switching Subtitles
VR

DVD-V
DVD-V
Total

Connections

--

Introduction

3

DVD-R
DVD-RW
VD-RW
W

DVD+RW

DVD+R
DVD+R

0:00:00

DivX

®

Press [PLAY B] to start programme
playback.

Hint

Note

During playback, press [DISPLAY].
Or press [SUBTITLE] during playback and follow
from step 3.

2

Select the
icon using [L \ P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
selection menu.

3

Select the desired subtitle language
using [U \ D], then press [ENTER].
Subtitles are displayed in the selected language.
If you select “OFF”, subtitles will disappear.

Note

Follow steps 1 to 2 in “Random
Playback” on page 72.

Switching Audio Soundtrack

2

Select “Slide Show” using [U \ D],
then press [ENTER].
Select the display time using
[U \ D], then press [ENTER].

4

Press [SETUP] to exit.

Note
• Large-size JPEG files take a few moments to be
displayed.

VR

HDD

DVD-V
DVD-V

DVD-R
DVD-RW
VD-RW
W

CD

VCD

DivX

®

When playing back a DVD-Videos recorded with two
or more soundtracks (often in different languages),
you can switch among them during playback.
When playing back the titles in HDD or VR mode
DVD-RW discs recorded with bilingual audio, you can
switch to main audio (L), sub audio (R) or a
combination of both (L / R).
When playing back Audio CDs or Video CDs, you can
switch among the left, the right channel and stereo.
For audio CD, skip to step 2 or press [AUDIO D] and
skip to step 3.

Others

1

VHS Functions

3

Function Setup

1

JPEG

Editing

You can select the display time between 5 seconds
and 10 seconds.

• With some discs it is only possible to change the
subtitle language from the disc menu. Press
[TOP MENU] or [DISC MENU] to display the disc
menu.
• If a 4-digit language code appears in the subtitle
menu at step 3, refer to the “Language Code” on
page 101.
• For discs with DivX® files, the screen only displays
the number of subtitle languages.

Slide Show

Playback

• During programme playback, if you forward the track
to the end, the playback speed of the next track will
be normal.
• During programme playback, you cannot use the
search function except for the search with
[SKIP H \ G].

1

Recording

• To erase tracks you selected, press [CLEAR].
• You can make up to 50 track settings.
• To cancel programme playback, press [STOP C]
twice during programme playback. “OFF” appears
on the screen.
• You may also select the desired track using
[the Number buttons] at step 3.
• For Video CDs with PBC function, the PBC setting
will be switched to off automatically when you start
programme playback.

Many DVD-Videos have subtitles in one or more
languages. The available languages are usually
printed on the disc case. You can switch subtitle
languages at any time during playback.

Basic Setup

4

During playback, press [DISPLAY].
Or press [AUDIO D] during playback and follow
from step 3.

EN

73

E3NG0FD_EN.book Page 74 Wednesday, January 30, 2008 10:37 AM

2

3

Select the
icon using [L \ P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
selection menu.
Select a desired audio soundtrack or
audio channel using [U \ D], then
press [ENTER].
With a DVD-Video, VR mode DVD-RW, or DivX®
files:
Audio soundtrack will switch.
Example:
English J Spanish J French
If the title contains both main and sub audio, you
can further select L (main), R (sub), L/R (mixed of
main and sub).
With an Audio CD or Video CD:
The Audio channel will switch.
Example:
L/R J L J R

Note
• Select Virtual Surround to “OFF” in case the sound
is distorted.
• The setting will be kept “OFF” when the unit is
turned off.

Switching Camera Angles
DVD-V
Some DVD-Videos feature scenes shot from two or
more angles. The disc case is usually marked with an
angle icon if the disc has multi-angle scenes.

1

The angle icon appears when a switching camera
angle is available. (Available only when the angle
icon appears in bottom right on the TV screen.)

2

Switching Virtual Surround System
DVD-V
DVD-V

HDD

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD-R
DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
CD
MP3
You can enjoy stereophonic virtual space through
your existing 2 channel stereo system.
For audio CD or MP3, skip to step 2.

1

Select the
icon using [L \ P],
then press [ENTER].
The angle will switch each time you press
[ENTER].

Note
• For some discs, it is only possible to change the
soundtrack from the disc menu. Press [TOP MENU]
or [DISC MENU] to display the disc menu.

During playback, press [DISPLAY].

Note
• If the Angle Icon setting is “OFF” in “Setup” menu,
the
icon will appear only when the disc is played
back and the Display menu appears. (See page 88.)
• Even when the
icon is not displayed, you can
select the angle if the currently played back title has
at least two multi-angle scenes.

Reducing Block Noise
HDD

During playback, press [DISPLAY].

DVD-R

DVD-V
DVD+R
DVD+RW
VD+RW
W

Video

VR

DVD-R
DVD-RW
VD-RW
W

DVD-RW

DVD+R
DVD+R

VCD

Display menu will appear.

2

Select the
icon using [L \ P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
selection menu.

DivX

®

1
2

Virtual Surround menu will appear.
e.g.) DVD-Video
T

1/ 5 C

1/ 5

0:01:00 / 1:23:45

3
Select “OFF”, “Type 1” or “Type 2”
using [U \ D], then press [ENTER].
e.g.) DVD-Video
T

1/ 5 C

1/ 5

0:01:00 / 1:23:45
DVD Video

OFF
Type 1
Type 2

• OFF:
• Type 1:
• Type 2:

74

EN

No effect
Natural effect
Emphasised effect

Select the
icon using [L \ P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
selection menu.
Noise Reduction menu will appear.

DVD Video

3

During playback, press [DISPLAY].

Select the desired option using
[U \ D], then press [ENTER].

This function reduces noise in the playback picture.
When playing back discs recorded in long time modes
such as EP or SLP, select “Type 1” or “Type 2”.
“Type 2” is more effective.
When playing back discs with a little noise, such as
DVD-Videos, select “OFF”.

E3NG0FD_EN.book Page 75 Wednesday, January 30, 2008 10:37 AM

Introduction

Editing
4

Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from
this list and easily edit the titles as you prefer.

Connections

Guide to a Title List

Arrow: Indicating there is a previous / next
page.
5 Title list page number: Current page / total
pages.
6 Title list icon, which indicates a type of the
displayed title list.
: HDD (Original) mode
: HDD (Playlist) mode
: VR (Original) mode
: VR (Playlist) mode
: +VR mode
: Video mode
7 Submenu: Submenus for the selected menu
are displayed here.
8 Title name (editable): If you do not name the
title, the recorded date, time, channel, and
the recording mode are displayed here.
9 Progress bar: Indicating the progress of the
playback.
10 Preview window: Preview of the selected
title is displayed here.
11 Playback status: Indicating the current
playback status of the selected title.
ORG

Press [HDD] or [DVD], then press
[TOP MENU].
2 1 6

PL

ORG

Basic Setup

PL

+VR

ORG

Video

Title List

ABCDE
11:00 (10:00:00)

27/03/08

125 SP

2

3

4

5

6

1/6

3 4

5

Press [RETURN] to exit the title list.

Edit
1

Scene Delete
Edit Title Name
Chapter Mark
Protect

0:00:59

You will find editing discs is easy. This unit offers
convenient edit functions.
You can edit the following from a title list.
• Assigning a name to a title
• Dividing a title
• Combining titles
• Adding titles to a Playlist
• Erasing all Playlist
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
(Possible editing functions depend on the recording
format and editing method.)

Function Setup

What “Original” or “Playlist” is for?
There are 2 types for the title list: Original and Playlist.

VHS Functions

Original:
Original is the list of the recorded programmes (titles)
when they are recorded. Original is available for HDD
and DVD-RW. Please note that editing the titles in the
Original is like editing the original data. For example, if
you erase a title in the Original, the title cannot be
recovered.
HDD

Others

11 10
9
8
7
Title name.
Title information, which displays recorded
time, length of the title, date / month / year,
recorded CH, and the recording mode.
3 Title list: List of titles recorded on the HDD
or disc. Each title is indicated by its index
picture. Index picture for the selected title
can be seen in motion. Following icons may
be displayed on the index picture.
: Indicating the title has never been
played back yet.
: Indicating the title is protected.
: Indicating the title is a copy-protected
title.
1 : Indicating the title is a copy-once
programme.
I : If you call up the title list while
recording, “I” will be displayed on the
index picture of the title currently being
recorded.
For DVD+RW/+R, empty title always
appears at the last of the title list.

Editing Discs

Editing

23/03/08 18:00 22 SP

1
2

Playback

ORG

4

Recording

1

: Available to edit in the HDD Original

Original
VR

DVD-RW
Original

:

Available to edit in the VR mode
DVD-RWs Original

EN

75

E3NG0FD_EN.book Page 76 Wednesday, January 30, 2008 10:37 AM

Playlist:
Playlist is the copy of the Original. You can edit the
titles in the Playlist as you like without affecting the
original data in the Original. It works like a backup for
the Original. Delete a Playlist does not delete the
corresponding Original. But if you delete an Original,
the corresponding Playlists will be deleted. Playlist is
available only for the HDD and the VR mode DVDRWs.
HDD

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

1

In stop mode, press [TOP MENU].
Title List will appear.
For HDD and VR mode DVD-RW disc, press
[DISC MENU] to switch between “Original” and
“Playlist”.

2

: Available to edit in the HDD Playlist

Playlist

Press [ENTER] at the desired title
with [U \ D \ L \ P].
e.g.) VR mode DVD-RW disc

VR

DVD-RW
Playlist

Available to edit in the VR mode
:
DVD-RWs Playlist

ORG

About Edit Mark:
Edit marks will be added automatically where title is
edited, for example where a title is divided or
combined. These marks work as chapter marks when
you search for a chapter, but cannot be deleted like
chapter marks. Also, when a title with chapter marks
are dubbed from DVD to the HDD, those marks
become edit marks once they are dubbed to the HDD.
Using these editing functions to modify
copyrighted content for any purpose other than
your private viewing may be prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and
criminal liability.

Video

VR

DVD-RW

3

Note
• It is not possible to retrieve deleted titles.

76

EN

2

3

4

5

6

Select “Title Delete” using [U \ D],
then press [ENTER].
Play From Start
Edit
Title Delete
Add To Playlist
Dubbing

4

Select “Yes” using [U \ D], then
press [ENTER].
Delete this title?
Yes
No

“Are you sure?” will appear. Select “Yes” using
[U \ D], and then press [ENTER].
Title is deleted.

DVD-R

DVD+RW
D
VD+RW
VD+R
W
DVD+R
DVD+R
You can delete titles you do not want to keep.
When an Original is deleted from HDD or VR mode
DVD-RW disc, the recordable disc space will
increase. Even when a Playlist is deleted, the original
of the Playlist will remains, and recordable disc space
will not increase.
Recordable disc space of Video mode DVD-RW and
DVD+RW disc will increase when the last title on the
title list is deleted. However, deleting the title will not
change recordable disc space for DVD-R and DVD+R
disc.

901 LP

1

Pop up window will appear.

Deleting Titles
DVD-R
DVD-RW
VD-RW
W

901 LP
01/01/08

1/2

Note
• A Playlist is not available for DVD-R or Video mode
DVD-RW and DVD+RW/+R discs.
• It is not possible to edit a disc recorded in another
video system other than PAL, such as NTSC.
• After finalising a DVD-RW/-R or DVD+R disc, you
cannot edit any information that is on that disc.

HDD

Title List

01/01/08 12:00
12:00 (2:00:00)

5

Press [RETURN] or [STOP C] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.

Note
• If you delete the title in DVD+RW disc, deleted title
will be displayed as “Empty”.
• You cannot overwrite on the “Empty”.

E3NG0FD_EN.book Page 77 Wednesday, January 30, 2008 10:37 AM

Deleting Selected Titles

Select “Yes” using [U \ D], then
press [ENTER].
ORG

HDD

Press [HDD], then press
[TOP MENU].

2

Select the title you want to delete
using [U \ D \ L \ P], then press
[ENTER].
Select “Delete Plural Titles” using
[U \ D], then press [ENTER].

1/1

Final confirmation message will appear. Select
“Yes”, then press [ENTER].

Editing Title Name
HDD

1

2

3

4

5

6

2

Press [ENTER] at the desired title
with [U \ D \ L \ P].
e.g.) VR mode DVD-RW disc

901 LP
01/01/08

901 LP

2

3

Repeat step 4 until you select all the
titles you want to delete.

4

5

6

Title List

Function Setup

Trash mark will appear whose title number is
highlighted for deletion.

1

1/2

ABCDE
11:00 (10:00:00)

27/03/08

Pop up window will appear.

125 SP

2

3

4

5

6

3

Edit menu will appear.

4
To remove the trash mark from the title:
Select the title with the trash mark, then press
[ENTER].

Select “Edit” with [U \ D], then
press [ENTER].

VHS Functions

1

1/1

Select “Edit Title Name” using
[U \ D], then press [ENTER].
A window for entering the title name will appear.

Others

6

Title List

01/01/08 12:00
12:00 (2:00:00)

Editing

ORG

ORG

Playback

125 SP

1

In stop mode, press [TOP MENU].
Title List will appear.
For HDD and VR mode DVD-RW disc, press
[DISC MENU] to switch between “Original” and
“Playlist”.

1/1

5

DVD-R

Recording

27/03/08

VR

DVD-RW

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

Title List

ABCDE
11:00 (10:00:00)

Video

DVD-R
DVD-RW
VD-RW
W

DVD+R
DVD+RW
VD+RW
W
DVD+R
DVD+R
You can edit the title names from this menu.
The title names you edit will appear on the title list.

Select other title you want to delete
using [U \ D \ L \ P], then press
[ENTER].
ORG

3

4

Resume Playback
Play From Start
Edit
Title Delete
Add To Playlist
Delete Plural Titles
Dubbing

4

125 SP

2

Basic Setup

3

27/03/08

1

Connections

1

Title List

ABCDE
11:00 (10:00:00)

You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot
be brought back.

Introduction

7

Press [CLEAR].
Confirmation message will appear.

EN

77

E3NG0FD_EN.book Page 78 Wednesday, January 30, 2008 10:37 AM

5

To enter the title name, refer to
“Guide to Editing Title Names” on
this page.

Adding or Deleting Chapter Markers
Manually
VR

ORG

Edit - Edit Title Name

HDD
1

A B
a b
1 2
@ !

C
c
3
?

When you finish entering the title name, press
[ENTER].

Select “Yes” using [U \ D], then
press [ENTER].
The name you edited becomes the title.

1

Follow the steps 1 to 3 in “Editing
Title Name” on page 77.

2

Select “Chapter Mark” using
[U \ D], then press [ENTER].

3

Use [SKIP H \ G], [REV E],
[FWD D], [PLAY B] and [PAUSE F]
to find where you want to create a
new chapter mark.
Or, use [SKIP H \ G] to find a
chapter mark that you want to delete.

4

Select “Add” or “Delete” accordingly
using [U \ D], then press [ENTER].

Press [RETURN] and then [RETURN]
or [STOP C] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.

Guide to Editing Title Names
Step 1 : Select the desired character set using
[U \ D], then press [ENTER].
Step 2 : Using the list below as a guide, press
[the Number buttons] repeatedly until the
desired letter appears.

e.g.) VR mode DVD-RW disc Original
ORG

Edit - Chapter Mark

1

Select
Press

ABC

abc

123

@!?

<space>

<space>

0

<space>

–

1

! ”# $ % & ’( )
∗+,-./:;<=>
?@[]^_{|}

–

DVD+R
DVD+R

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
0:00:59

7

DVD+RW

You can add chapter marks to a title. After a title is
marked with chapters, you can use the chapter search
feature.
You can set a chapter mark anywhere you want.

2 3/03/08 18:00 22 SP

6

DVD-R
DVD-RW
VD-RW
W

Chapter

Add
Delete

3/5

23/03/08 18:00 22 SP

1 : 25 : 47

You cannot delete the first chapter of a title.
ABC

abc

2

–

DEF

def

3

–

GHI

ghi

4

–

Select “Yes” using [U \ D], then
press [ENTER].

JKL

jkl

5

–

e.g.) VR mode DVD-RW disc Original

MNO

mno

6

–

PQRS

pqrs

7

–

TUV

tuv

8

–

WXYZ

wxyz

9

–

5

ORG

• Characters set will be changed to the “@!?”
automatically if you press [1] after you selected the
“ABC” or “abc” mode.

Note
• To delete letters, press [CLEAR] repeatedly. Press
and hold [CLEAR] to delete all letters.
• Press [L \ P] to move the cursor to the left or right.
• You can enter up to 30 letters.
• Unrecognisable characters will be replaced with
asterisks (*). If you delete them, adjoining
characters may change to asterisks (*) or other.

78

EN

Edit - Chapter Mark - Add

1

Chapter

Yes
No

3/5

23/03/08 18:00 22 SP

1 : 25 : 47

A chapter mark is added.
Adding a chapter mark:
If you select “Add” at step 4, a new chapter mark is
created at the point you specified.
Deleting a chapter mark:
If you select “Delete” at step 4, the chapter mark you
selected is deleted.

E3NG0FD_EN.book Page 79 Wednesday, January 30, 2008 10:37 AM

3

Press [RETURN].
Press [RETURN] again and then
[RETURN] or [STOP C] to exit.

Select the desired interval using
[U \ D], then press [ENTER].
Video

Edit - Chapter Mark
1

Note

Press [DVD] first.

Follow the steps 1 to 3 in “Editing
Title Name” on page 77.

2

Select “Chapter Mark” using
[U \ D], then press [ENTER].
Video

Select “Yes” using [U \ D], then
press [ENTER].
Chapter marks are added.
If you select “OFF” at step 3, all the chapter marks
are erased.

5

Press [RETURN] and then [RETURN]
or [STOP C] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.

Note
• You cannot select the chapter mark the title of which
is less than 5 minutes.
• You cannot select a chapter mark interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter mark may be delayed depending on the
recording content.
• Maximum number of chapter for Video mode DVD is
99 chapters per disc and title.
• You may not add any chapter marks to the title
dubbed from HDD.

Hiding Chapters
DVD+RW

Edit
Edit Title Name
Chapter Mark

DVD+R
DVD+R

You can hide chapters from the title list.
Hidden chapters are skipped during playback.

Function Setup

1

Editing

1

4

Playback

DVD-RW
For titles in Video mode DVD-RW disc, you can set or
edit chapter at every selected time interval at once.
You can also clear all the chapter marks at once.
You can only specify the interval of chapter marks that
last for more than 5 minutes.

1 : 25 : 47

Recording

Video

23/03/08 18:00 22 SP

Basic Setup

Adding or Deleting Chapter Marks at
once for Video Mode DVD-RW disc

OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes

Connections

For DVD, the data will be written onto the disc
momentarily.
This operation may take awhile to be
completed.
• Maximum numbers of chapter for each media:
HDD
: 99 chapters per title
VR mode DVD : 999 chapters per entire Playlist
and Original
+VR mode DVD : 254 chapters per disc, 99
chapters per title
• Only with regard to DVD editing, you may not be
able to add chapter marks depending on the
duration of the title or the number of chapters.
• Only with regard to DVD editing, remaining time of
the disc may decrease when adding chapter marks
or increase when clearing chapter marks depending
on the recording time or edited contents.

Introduction

6
7

Press [DVD] first.

23/03/08 18:00 22 SP

1 : 25 : 47

Follow the steps 1 to 3 in “Editing
Title Name” on page 77.

2

Select “Hide Chapter” using [U \ D],
then press [ENTER].

3

Use [SKIP H \ G], [PLAY B] and
[PAUSE F] to decide the chapter to
be hidden.

VHS Functions

1

Others

EN

79

E3NG0FD_EN.book Page 80 Wednesday, January 30, 2008 10:37 AM

4

Select “Hidden” using [U \ D], then
press [ENTER].

3

Press [ENTER] again.
ORG

+VR

Edit - Protect

Edit - Hide Chapter
1
1

Chapter

OFF

ON

Visible
Hidden

3 / 5 Visible

23/03/08 18:00 22 SP

1 : 25 : 47

23/03/08 18:00 22 SP

1 : 25 : 47

5
6

For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
• If the title is already protected, “ON A OFF” will
appear instead. Press [ENTER], to release the
title from protection.
• The protected title will be marked with
icon.

Press [RETURN].
Press [RETURN] again and then
[RETURN] or [STOP C] to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.

4

If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[U \ D] to select “Visible” at the step 4 on this
page.
Data will be written onto the disc momentarily.

For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
To protect a whole disc
(VR mode DVD-RW and DVD+RW/+R discs
only):
Select “Disc Protect OFF A ON” from the Disc
Menu, then select “Yes”. Refer to “Setting a Disc
to Protect” on page 58.

Note
• “Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.

Press [RETURN] and then [RETURN]
or [STOP C] to exit.

Dividing a Title

Protecting Titles

VR

HDD

DVD-RW

DVD+RW

Playlist
VR

You can divide a title into two new titles.

DVD-RW

HDD

Original

Original

To prevent the accidental editing or erasing of the
titles, you can protect them in the Original menu.
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

1

Follow the steps 1 to 3 in “Editing
Title Name” on page 77.

2

Select “Protect” using [U \ D], then
press [ENTER].
e.g.) VR mode DVD-RW disc Original
ORG

Scene Delete
Edit Title Name
Chapter Mark
Protect

23/03/08 18:00 22 SP

1 : 25 : 47

EN

1

Follow steps 1 to 3 in “Editing Title
Name” on page 77.

2

Use [SKIP H \ G], [REV E],
[FWD D], [PLAY B] and [PAUSE F]
to find where you want to divide the
title.

3

Select “Title Dividing” using [U \ D],
then press [ENTER].

4

Select “Yes” using [U \ D], then
press [ENTER].

Edit

1

80

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

E3NG0FD_EN.book Page 81 Wednesday, January 30, 2008 10:37 AM

PL

Introduction

e.g.) VR mode DVD-RW disc Playlist

Adding Titles to a Playlist

Edit - Title Dividing

VR

HDD

Yes
No

1

Original

DVD-RW
Original

For HDD and VR mode DVD-RW disc, you can add a
title to the Playlist as you want.

1 : 25 : 47

1

Follow the steps 1 to 2 in
“Deleting Titles” on page 76.

2

Select “Add To Playlist” using
[U \ D], then press [ENTER].
Play From Start
Edit
Title Delete
Add To Playlist
Dubbing

Press [RETURN] or [STOP C] to exit.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.

• You cannot divide a title of the disc when the number
of recording titles reaches the maximum of 600
(HDD), 99 (-RW) or 49 (+RW), or the number of
recording chapters reaches the maximum of 999
(-RW) or 254 (+RW).
• If there is not enough recordable space left in HDD,
you cannot divide a title of the HDD Original.

Playlist

You can combine two titles into a single title.

4

Follow steps 1 to 3 in “Editing Title
Name” on page 77.
Select “Title Combining” using
[U \ D], then press [ENTER].
Select another title to combine using
[U \ D \ L \ P], then press [ENTER].
Select “Yes” using [U \ D], then
press [ENTER].

Function Setup

3

For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.

Editing

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

2

Press [RETURN] or [STOP C] to exit.

Playback

VR

1

4

• To delete a title from the Playlist, refer to “Deleting
Titles” on page 76.
• When the number of the Playlist reaches its
maximum (refer to page 38), or when the number of
the total chapter marks of the Playlists reaches 999
(only for VR mode DVD-RW), “Add To Playlist”
cannot be selected.

DVD-RW

Playlist

The title is added to Playlist.

Hint

Combining Titles
HDD

Select “Yes” using [U \ D], then
press [ENTER].

Recording

3

Note

Basic Setup

The title is divided into two new titles with the
same title names.
For DVD+RW
: Writing onto the disc starts.
It may take awhile to write
the data on a disc.
For HDD and VR
: Proceed to step 5.
mode DVD-RW disc

5

Connections

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

23/03/08 18:00 22 SP

PL

Edit - Title Combining

03/01/08 12:00
12:00(0:30:00)
1
1+2

PL

901 LP
03/01/08
2

Title List

01/01/08 12:00
12:00 (2:30:00)

901 LP

901 LP
01/01/08

901 LP

3

1

2

3

6

4

5

6

Combine selected titles?

4

Yes
5
No

1/6

5

VHS Functions

The two titles will combine into a single title.
e.g.) VR mode DVD-RW disc Playlist

1/6

Press [RETURN] or [STOP C] to exit.
Others

For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.

Note
• You cannot select the same title twice and combine
it into a single title.
• If either one of the two original titles is deleted, the
combined new title is also deleted.
EN

81

E3NG0FD_EN.book Page 82 Wednesday, January 30, 2008 10:37 AM

Deleting All Playlists

Deleting Parts of Titles

VR

VR

HDD

DVD-RW
D
VD-RW
VD-R
W
All Playlists can be deleted if it is no longer needed.

1
2

Press [SETUP].

3

Select “Delete All Playlists” using
[U \ D], then press [ENTER].

Select “DVD Menu” (for DVD) or
“HDD Menu” (for HDD) using
[U \ D], then press [ENTER].

e.g.) DVD

HDD

DVD-RW
D
VD-RW
VD-R
W
You can delete a specific part of a title.
Even when a title is deleted from the Playlist, the
original title will remain as it is.

If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.

1

Follow the steps 1 to 3 in “Editing
Title Name” on page 77.

2

Select “Scene Delete” using [U \ D],
then press [ENTER].

DVD Menu

e.g.) VR mode DVD-RW disc Playlist

Format
Finalise
Disc Protect OFF ON
Delete All Playlists

PL

Edit
1

Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Title Combining

23/03/08 18:00 22 SP

4

Select “Yes” using [U \ D], then
press [ENTER].
Delete entire playlist?
Yes
No

“Are you sure?” will appear. Select “Yes” using
[U \ D], and then press [ENTER].
Playlist is deleted.

1 : 25 : 47

3

Use [SKIP H \ G], [REV E],
[FWD D], [PLAY B] and [PAUSE F]
to find the start point, then press
[ENTER].
PL

Edit - Scene Delete

For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.

1

Note

Start
End
Preview
Delete

• Deleting a Playlist will not increase the available
recording time on the disc.
23/03/08 18:00 22 SP

1 : 00 : 00

Then use [SKIP H \ G], [REV E],
[FWD D], [PLAY B] and [PAUSE F]
again to move to the end point, and
press [ENTER].
PL

Edit - Scene Delete
1

Start
End
Preview
Delete

23/03/08 18:00 22 SP

1 : 15 : 00

82

EN

E3NG0FD_EN.book Page 83 Wednesday, January 30, 2008 10:37 AM

Select “Delete” using [U \ D], then
press [ENTER].
PL

Edit - Scene Delete

1

Deleting All Titles in HDD
HDD

Press [STOP C] if you are playing back a disc.

1
2

Press [SETUP].

3

Select the desired type of deletion
using [U \ D], then press [ENTER].

Start
End
Preview
Delete

Connections

4

Introduction

The cursor will move to “Preview”.
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the area
selected for deletion is indicated in red.
You can check the preview by pressing [ENTER].
• Before and after 5 seconds of the deleted point
will be playback for preview.

Select “HDD Menu” using [U \ D],
then press [ENTER].

23/03/08 18:00 22 SP

Basic Setup

Select “Delete All Titles” if you want to delete all
titles including the ones protected.
Select “Delete All Unprotected Titles” if you want
to delete only the unprotected titles.
Select “Delete All Playlists” if you want to delete
all Playlists.

1 : 40 : 00
HDD Menu

Select “Yes” using [U \ D], then
press [ENTER].

Recording

5

Delete All Titles
Delete All Unprotected Titles
Delete All Playlists

“Are you sure?” will appear. Select “Yes” using
[U \ D], and then press [ENTER].
PL

Edit - Scene Delete
1

4

Playback

Are you sure?
Yes
No

Select “Yes” using [U \ D], then
press [ENTER].
Delete entire titles?

23/03/08 18:00 22 SP

1 : 40 : 00

6

Press [RETURN] and then [RETURN]
or [STOP C] to exit.

“Are you sure?” will appear. Select “Yes” using
[U \ D], and then press [ENTER].
Titles are deleted.

Editing

The part of the title is deleted.

Yes
No

For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.

Function Setup

Note

VHS Functions

• For VR mode DVD-RW disc, you cannot select
“Scene Delete” if the number of chapter marks in the
Original or Playlist is 999. (Depends on the content,
there is a case that you cannot select “Scene
Delete” before the number of chapter marks reaches
999.)
• When a scene is deleted from an original, the scene
on the Playlist will also be deleted.

Others

EN

83

E3NG0FD_EN.book Page 84 Wednesday, January 30, 2008 10:37 AM

Function Setup
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
Playback

Items (highlight is the default)
Parental Lock
E Page 86
Audio Out
Dynamic Range
E Pages 86- Control
87
PCM
Dolby Digital
MPEG
DTS
Disc Menu Language
E Page 87

Audio Language
E Page 87

Subtitle Language
E Page 88

General Setting

Angle Icon
E Page 88
Still Mode
E Page 88
Variable Skip / Replay
E Page 88

Display

TV System
E Page 88
OSD Language
E Page 89

Screen Saver
E Page 89

FL Dimmer
E Page 89
Video

TV Aspect
E Page 90
Video Out
E Page 90

84

EN

All
level 1 to 8
ON
OFF
48kHz
96kHz
PCM
Stream
PCM
Stream
ON
OFF
French
English
Spanish
German
Italian
Other
Original
French
English
Spanish
German
Italian
Other
OFF
French
English
Spanish
German
Italian
Other
ON
OFF
Auto
Field
Frame
Variable Skip
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
PAL
Auto
Français
English
Español
Deutsch
Italiano
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Auto
Bright
Dark
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
SCART (RGB)
Component
(Progressive)
Component
(Interlace)

Contents
Set the parental level for DVD disc playback.
Compressing the range of sound volume.
Set whether the sound recorded in 96kHz will be
down sampled to 48kHz.
Set whether to convert Dolby Digital into PCM or
to output Dolby Digital signals.
Set whether to convert MPEG into PCM or to
output MPEG signals.
Set whether DTS signal is output or not.
Set the language for Disc Menu.

Set the language for audio.

Set the language for subtitles.

Set whether or not to display the angle icon.
Set the type of still image in pausing playback.

Set the amount of skip time when you press
[VARIABLE SKIP].

Set the amount of rewind time when you press
[VARIABLE REPLAY].

Set the TV system.
Set the language for OSD (on-screen display).

Set the idling time before the screen saver starts.

Set the brightness of the Front Panel Display.

Set a picture size according to aspect ratio of
your TV.
Sets the video output mode.

E3NG0FD_EN.book Page 85 Wednesday, January 30, 2008 10:37 AM

Items (highlight is the default)
Auto Chapter
E Page 40

Clock

General Setting
Reset All

E Page 92

Set the clock manually.
France
Spain
Germany
Italy
Switzerland

Set the DVB channels to Channel Plan of each
country.

Tune the DVB and analogue channels
automatically.
Lock the DVB channels, edit the favourite lists.
Tune the DVB channels automatically.
Tune the DVB channels manually.
Display the detailed information of the current
DVB channel.
Tune the analogue channels automatically.
Tune the analogue channels manually.
Move the analogue channels to different position.
Provide DivX® VOD registration code.
OFF
English
French
Spanish
German
Italian
Swedish
Dutch
Russian1
Russian2
Hungarian
Polish
Czech
Hebrew
RGB
YCbCr
ON
OFF
Normal
Enhanced

Set the language for DivX® Subtitle.

VHS Functions

HDMI Audio
E Page 91
RGB Range
E Page 92

Set the video colour system to “PAL” or “SECAM”
automatically.
Set the video colour system to “PAL”.
Set the video colour system to “SECAM”.
Set the clock automatically.

Function Setup

Format

E Page 91

Set the external input audio type for recording.

Editing

HDMI

Auto Tuning (DVB & ANALOG)
E Page 25
DVB Channel
Edit Channels
E Page 29
Setup
Auto Tuning
E Page 27
Manual Tuning
E Page 28
Signal
Information
E Page 31
ANALOG
Auto Tuning
Channel Setup E Page 25
Manual Tuning
E Page 26
Move
E Page 27
DivX® VOD
E Page 62
DivX Subtitle
E Page 91

Set to prohibiting additional recording (OFF) or to
replace the title list after recording (ON).
Set the audio type for recording.

Playback

DivX

Clock Setting
E Page 36
Country
E Page 28

Set a aspect ratio for Video mode recording.

Recording

Channel

Auto Clock Setting

E Page 36

PAL
SECAM
ON
OFF

Set the recording audio type. (Only when the
recording mode is set to “XP”.)
Set the unit to finalise the disc automatically.

Basic Setup

Make Recording Compatible
E Page 39
Bilingual Recording Audio
E Page 42
External Input Audio
E Page 41
Video Colour System
E Page 50

Contents
Insert chapter marks periodically.

Connections

Recording Audio Select (XP)
E Page 42
Auto Finalise
E Page 59
Aspect Ratio (Video mode)
E Page 40

OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
PCM
Dolby Digital
ON
OFF
Auto
4:3
16:9
ON
OFF
Main
Sub
Stereo
Bilingual
Auto

Introduction

Setup
Recording

Set the colour space for the HDMI output.
Set whether to output the HDMI audio signal or
not.
Set the black-white contrast level for HDMI RGB
output.
Set to the default setting.

Others

Note
• Your change to each settings stays on even when the power is switched off.
• An item which is not currently available is grayed in the settings.

EN

85

E3NG0FD_EN.book Page 86 Wednesday, January 30, 2008 10:37 AM

Playback
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

Select “Playback” using [U \ D],
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

Note
• “Parental Lock” function may not be available on
some discs.
• It may be difficult to determine if some DVDs
support the parental lock function. Be sure to
confirm that “Parental Lock” function operates in the
way that you have set.
• Record the password in case you forget it.
A password is not yet set

Select “Yes” using [U \ D], then
press [ENTER]. Enter a new
password using
[the Number buttons], then press
[ENTER].
Change Password?

Password Input

Yes
No

Yes

Your setting is activated.

3

Select a desired item using [U \ D],
then press [ENTER].
1
2
3
4
5
6
7
8
9

Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Variable Skip / Replay
TV System

If you select “No”, press [SETUP] to exit.
A password is already set

Enter the current password using
[the Number buttons].
Password Input

If you want to change the password, select “Yes”
using [U \ D], then press [ENTER].
Change Password?

4
5

Refer to 1. to 9. on pages 86 to 88 and
set the selected item.
When you finish with the setting,
press [SETUP] to exit.

Yes
No

Enter a new password using
[the Number buttons], then press
[ENTER].
Password Input

1. Parental Lock (Default: All) (DVD only)
Set “Parental Lock” level.

Change “Parental Lock” level using
[U \ D], then press [ENTER].
Proceed to either of the following steps.
Parental Lock
All
8
7
6
5
4
3
2
1

Parental level
All: All parental locks are cancelled.
8: DVD software of any grade (adult / general
/ children) can be played back.
7 to 2: Only DVD software intended for general
use and children can be played back.
1: Only DVD software intended for children
can be played back.

86

EN

Your setting is activated.

Note
• Press [CLEAR] to erase numbers entered
incorrectly.
• If you forget your password or you want to clear all
settings in “Parental Lock”, enter [4], [7], [3], [7]
using [the Number buttons] at the option window.
Your password is cleared and parental levels are set
to “All”.

2. Audio Out
Choose the appropriate audio setting for your
external device.
It will only affect a disc playback.

Select a desired item using [U \ D],
then press [ENTER].
Audio Out
Dynamic Range Control
PCM
Dolby Digital
MPEG
DTS

E3NG0FD_EN.book Page 87 Wednesday, January 30, 2008 10:37 AM

Settings for MPEG (Default: PCM) (DVD only)

Select a setting using [U \ D], then
press [ENTER].

Set to “ON” to make the dynamic range narrower.

Select a setting using [U \ D], then
press [ENTER].

MPEG
PCM
Stream

Connections

Dynamic Range Control

Your setting is activated.

ON
OFF

Your setting is activated.
“Dynamic Range Control” function is effective only
with analogue audio connection.

Introduction

Dynamic Range Control (Default: ON)
(DVD only)

PCM:
Stream:

Note

Basic Setup

• “Dynamic Range Control” function is available only
on discs recorded in the Dolby Digital format.

Converts MPEG into PCM.
If your amplifier / decoder is NOT
compatible with MPEG, set to “PCM”.
Outputs MPEG Audio signals.
If your amplifier / decoder is compatible
with MPEG, set to “Stream”.

Settings for DTS (Default: ON) (DVD only)
PCM sampling (Default: 48kHz)

Select a setting using [U \ D], then
press [ENTER].

Select a setting using [U \ D], then
press [ENTER].

DTS

Recording

PCM

ON
OFF

48kHz
96kHz

Your setting is activated.

Your setting is activated.
ON:
48kHz:

Note

Dolby Digital conversion (Default: Stream)

Select a setting using [U \ D], then
press [ENTER].

3. Disc Menu Language (Default: French)
(DVD only)
Set “Disc Menu Language”.

Select a setting using [U \ D], then
press [ENTER].

Editing

When playing back a disc with copyright protection:
• Even if you select “96kHz”, the sound is down
sampled to 48 kHz.

OFF:

Outputs DTS signals.
If your amplifier / decoder is compatible
with DTS, set to “ON”.
No DTS signal is output.
If your amplifier / decoder is NOT
compatible with DTS, set to “OFF”.

Playback

96kHz:

If your amplifier / decoder is NOT
compatible with 96 kHz PCM, select
“48kHz”. Sound recorded at 96 kHz is
down sampled to 48 kHz.
If your amplifier / decoder is compatible
with 96 kHz PCM, select “96kHz”. Sound
is sampled at 96 kHz.

Disc Menu Language

Function Setup

French
English
Spanish
German
Italian
Other

Dolby Digital
PCM
Stream

Hint

Set “Audio Language”.

Select a setting using [U \ D], then
press [ENTER].
Audio Language
Original
French
English
Spanish
German
Italian
Other

Your setting is activated.
If “Original” is selected, the audio language is the
default of the inserted disc.

EN

Others

When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.

4. Audio Language (Default: Original)
(DVD only)

VHS Functions

Your setting is activated.
PCM:
Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT
compatible with Dolby Digital, set to
“PCM”.
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible
with Dolby Digital, set to “Stream”.

Your setting is activated.

87

E3NG0FD_EN.book Page 88 Wednesday, January 30, 2008 10:37 AM

5. Subtitle Language (Default: OFF)
(DVD only)

Frame:

Set “Subtitle Language”.

Select a setting using [U \ D], then
press [ENTER].
Subtitle Language

Note
• An individual picture on TV screen is called as
Frame, which consists of two separate images
called as Field. Some pictures may be blurred at the
“Auto” setting in still mode due to their data
characteristics.

OFF
French
English
Spanish
German
Italian
Other

8. Variable Skip / Replay

Your setting is activated.

If “Other” is selected, enter the
appropriate 4-digit code using
[the Number buttons].
Refer to “Language Code” on page 101.

Assign [VARIABLE SKIP] or
[VARIABLE REPLAY] to skip or rewind by a
certain amount of time when they are pressed.
Select a desired item using [U \ D], then
press [ENTER].
Variable Skip / Replay

Code Input
-

-

-

A
B

-

When you finish entering the code,
press [ENTER].
Hint
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] or [L] to erase numbers entered
incorrectly.

A : Variable Skip (Default: 30 seconds)
Sets the amount of skip time for
[VARIABLE SKIP].
Variable Skip
5 seconds
15 seconds
30 seconds
1 minute
5 minutes

B : Variable Replay (Default: 30 seconds)
Sets the amount of rewind time for
[VARIABLE REPLAY].

6. Angle Icon (Default: ON) (DVD only)

Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes

Set “Angle Icon”.

Select a setting using [U \ D], then
press [ENTER].
Angle Icon
ON
OFF

9. TV System (Default : PAL) (DVD only)
Select a setting using [U \ D], then press
[ENTER].

Your setting is activated.

TV System

7. Still Mode (Default : Auto) (DVD only)
Select a setting using [U \ D], then
press [ENTER].
Still Mode
Auto
Field
Frame

PAL
Auto

Your setting will be activated.
PAL:
Auto:

Your setting is activated.

Field:

88

EN

Automatically select the best resolution
setting (“Frame” or “Field”) based on the
data characteristics of the pictures.
Select “Field” when the pictures are still
unstable even if “Auto” is selected. “Field”
stabilises the pictures, although the picture
quality may become coarse due to the
limited amount of data.

Variable Skip
Variable Replay

Refer to the explanations below and set the
selected item.

Note
• You can only select the languages supported by the
inserted disc.
• “Audio Language” setting may not be available for
some discs.

Auto:

Select “Frame” to display relatively
motionless pictures in higher resolution.
“Frame” improves the picture quality,
although it may unstabilise the pictures
due to simultaneous output of two Field
data.

Outputs a modified PAL signal for viewing
discs recorded with the NTSC system on a
PAL system TV.
Changes the video system (PAL / NTSC)
automatically according to the format of
the inserted disc.

Note
• With discs recorded using the PAL system, a PAL
signal is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be
viewed on an NTSC system TV.
• With discs recorded using the NTSC system, an
NTSC signal is output for viewing on an NTSC or
Multi system TV.
• With discs recorded using the NTSC system, select
PAL to view on a PAL system TV.

E3NG0FD_EN.book Page 89 Wednesday, January 30, 2008 10:37 AM

Display
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

Select “Display” using [U \ D], then
press [ENTER].
General Setting

Set the front panel display brightness.

Select a setting using [U \ D], then
press [ENTER].
FL Dimmer
Auto
Bright
Dark

Connections

2

Introduction

3. FL Dimmer (Default: Bright)

You can choose one from “Auto”, “Bright” or
“Dark”.
If “Auto” is selected, the display gets dark when
the power is off.

Select the desired item using
[U \ D], then press [ENTER].

Recording

3

Basic Setup

Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

1 OSD Language
2 Screen Saver
3 FL Dimmer

Refer to 1. to 3. on this page and set
the selected item.

5

When you finish with the setting,
press [SETUP] to exit.

Playback

4

1. OSD Language (Default: Français)
Set the OSD language.

Editing

Select a language using [U \ D],
then press [ENTER].
Langue Aff. écran

Function Setup

Français
English
Español
Deutsch
Italiano

2. Screen Saver (Default: 10 minutes)
Set the screen saver time delay.

Select a setting using [U \ D], then
press [ENTER].

VHS Functions

Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes

Your setting is activated.

Others

EN

89

E3NG0FD_EN.book Page 90 Wednesday, January 30, 2008 10:37 AM

1
Video
1 In stop mode, press [SETUP]. Select

Video Out
SCART (RGB)
Component (Progressive)
Component (Interlace)

“General Setting” using [U \ D],
then press [ENTER].

2

• If your TV is compatible with progressive
scanning (576p/480p), connect the TV to the
COMPONENT VIDEO OUT jacks of this unit
and select “Component (Progressive)” and set
your TV to the progressive scan mode.
• If your TV is not compatible with progressive
scan, select “Component (Interlace)” for
component connection, or select
“SCART (RGB)” for Scart cable connection.
• Refer to pages 20 to 21 for more details.

Select “Video” using [U \ D], then
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

3

Select the desired setting using
[U \ D], then press [ENTER].

Only if you select the “Component (Progressive)”,
proceed to step 2. If you select “Component
(Interlace)” or “SCART (RGB)”, your setting is
activated.

Select the desired item using
[U \ D], then press [ENTER].

2

Use [L \ P] to select “Yes”. Press
[ENTER].

1 TV Aspect
2 Video Out

4

Refer to 1. and 2. on this page and set
the selected item.

5

When you finish with the setting,
press [SETUP] to exit.

Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE:
If there is no picture or picture is
distorted after selecting “Yes”,
wait about 15 seconds for autorecovery.

Activate?

1. TV Aspect (Default: 16:9 Wide)

Final confirmation window will appear.

You can select the TV aspect ratio to match the
formats of what you are playing back with the unit and
your TV screen (4:3 standard or 16:9 widescreen TV).

3

Select the desired setting using
[U \ D], then press [ENTER].

Confirm again to use progressive scan.
If picture is good, select “Yes”.

4:3 Letter Box
4:3 Pan & Scan
16:9 Wide

If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on
the top and bottom of the TV screen when playing
back a wide-screen picture. Select “4:3 Pan & Scan”
for a full height picture with both sides trimmed when
playing back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.

2. Video Out (Default: SCART (RGB))
This unit is compatible with the Progressive Scan
System. The feature provides you with the higher
definition images than the traditional output system
does. You can enjoy Progressive Scan image by using
HDMI OUT or COMPONENT VIDEO OUT. To utilise
the Progressive Scan system through the
COMPONENT VIDEO OUT, you must set Video
Output mode in “Setup” menu by following the steps
on right. “SCART (RGB)” is selected as the default.
• When you set the “Video Out” setting, make sure
that the AV1 (TV) Scart socket is connected to your
TV with Scart cable.

EN

No

Use [U \ D] to select “Yes”. Press
[ENTER] within 15 seconds.

TV Aspect

90

Yes

Yes
No

Your setting is activated.

Note
• When changing “Video Out” setting
(“SCART (RGB)”, “Component (Interlace)” or
“Component (Progressive)”), connect to the
corresponding jack on the TV. If the setting is
changed, for example, to “SCART (RGB)” while the
COMPONENT VIDEO OUT jacks are used to
connect to the TV, a distorted video signal may be
output.

E3NG0FD_EN.book Page 91 Wednesday, January 30, 2008 10:37 AM

HDMI
1 In stop mode, press [SETUP]. Select

2

• Make sure that the HDMI cable is connected and the
TV input is set to HDMI.

“General Setting” using [U \ D],
then press [ENTER].

“General Setting” using [U \ D],
then press [ENTER].

2

General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

3

When you finish with the setting,
press [SETUP] to exit.

Refer to 1. to 3. on pages 91 to 92 and
set the selected item.

5

When you finish with the setting,
press [SETUP] to exit.

1. Format (Default: RGB)

Editing

OFF
English
French
Spanish
German
Italian
Swedish

4

Playback

DivX Subtitle (Default: OFF)

DivX Subtitle

Select the desired item using
[U \ D], then press [ENTER].
1 Format
2 HDMI Audio
3 RGB Range

For “DivX® VOD”, refer to page 62 in details.

Select the desired setting using
[U \ D], then press [ENTER].

Recording

Select the desired item using
[U \ D], then press [ENTER].
DivX® VOD
DivX Subtitle

4

Select “HDMI” using [U \ D], then
press [ENTER].

Basic Setup

3

Connections

Select “DivX” using [U \ D], then
press [ENTER].

Introduction

DivX®
1 In stop mode, press [SETUP]. Select

You can select the colour space for HDMI output.
Set the appropriate colour space for your display
device.

Function Setup

Select a setting using [U \ D], then
press [ENTER].
• When the connected device is not compatible with
the Y/Cb/Cr, HDMI signal is output as RGB
regardless of the setting.
Format
RGB
YCbCr

VHS Functions

Your setting is activated.

2. HDMI Audio (Default: ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
DIGITAL AUDIO OUT (COAXIAL) jack to your audio
system, etc.), you can set the HDMI audio output off.

Select a setting using [U \ D], then
press [ENTER].
Others

• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF

Your setting is activated.

EN

91

E3NG0FD_EN.book Page 92 Wednesday, January 30, 2008 10:37 AM

3. RGB Range (Default: Normal)
You can adjust the RGB range to make the dark areas
of the HDMI images brighter.

Select a setting using [U \ D], then
press [ENTER].
• Select “Enhanced” if the black-white contrast is not
clear.
• This setting is effective only for HDMI RGB output.

Reset All
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].

2

RGB Range

Select “Reset All” using [U \ D],
then press [ENTER].

Normal
Enhanced

General Setting

Your setting is activated.

Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

3

Select “Yes” using [U \ D], then
press [ENTER].
Reset to factory default?
Yes
No

“Are you sure?” will appear. Select “Yes” using
[U \ D], and then press [ENTER].

4

When you finish with the setting,
press [SETUP] to exit.

Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
- DivX® VOD code
- Timer Programmes

92

EN

E3NG0FD_EN.book Page 93 Wednesday, January 30, 2008 10:37 AM

Introduction

VHS Functions

VHS

1

Press [B ON\STANDBY] to turn on
the unit.

2
3

Press [VCR].

4

During playback, press [PAUSE F].

VHS

Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons] or [PROG. G \ H] on the
remote control.
• There is a tape with a record tab in the unit.
Tape speed
Type of tape

Recording / Playback Time
E60

E120

E180

E240

Playback will be paused and sound will be muted.

SP mode

1 hour

Press [PLAY B] to resume playback.

LP mode

2 hours 4 hours 6 hours 8 hours

Press [STOP C] to stop playback.
Press [OPEN\CLOSE A] to eject the
tape.

• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually,
press [PROG. G \ H].

2 hours 3 hours 4 hours

Turn on the unit and insert a
recordable videotape.
Make sure that the TV input is set on the unit.

2
3

Press [VCR].

Playback

Note

1

Recording

5
6
7

Insert a pre-recorded tape, then
press [PLAY B] to begin playback.

Basic Recording

Basic Setup

To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.

Recording and One-touch Timer
Recording (OTR)

Connections

Playback

Select the recording mode using
[REC MODE].
• The desired recording mode is selected in SP
(standard play) or LP (long play) mode by
pressing [REC MODE].

Select the desired channel to record
using [PROG. G \ H] or
[the Number buttons].

5

Press [REC I] to start recording.

Editing

4

Function Setup

To temporarily stop recording or to resume it,
press [PAUSE F].

VHS Functions

After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head from damage.

Press [STOP C] when the recording
is completed.

EN

Others

6

93

E3NG0FD_EN.book Page 94 Wednesday, January 30, 2008 10:37 AM

Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it later,
cover the hole with cellophane tape.

One-touch Timer Recording
VHS
This feature allows you to set the recording length
simply by pressing [REC I].

Turn on the unit and insert a
recordable videotape.
Make sure that the TV input is set on the unit.

2
3

Press [VCR].

4

Select the desired channel to record
using [PROG. G \ H] or
[the Number buttons].

5

VHS
This function helps you to dub the contents in the
DVC (digital video camcorder) to VHS.

Preparing for DV dubbing (DVC to VHS):

Record tab

1

DVC to VHS Dubbing

Select the recording mode using
[REC MODE]. (See page 93.)

Press [REC I] repeatedly until the
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.
One-touch Timer Recording will start.

0:30
Normal Recording

1:00

• Insert a recordable videotape.
• Make sure your DVC is in video mode.

1
2

Press [VCR].
Select “DV” channel using
[INPUT SELECT F] or
[PROG. G \ H].

3

Select the recording mode using
[REC MODE]. (See page 93.)

4

Stop or pause the DVC where you
want to start dubbing.

5
6

Play back the DVC.
Press [REC].
The dubbing will start.

Note
• Dubbing will start from where the tape is stopped.

Search
Index Search
VHS

8:00

7:30

• When the unit reaches the specified time, it will be
turned off automatically.
• To change the recording length during One-touch
Timer Recording, press [REC I] repeatedly until
desired length appears.
• To cancel One-touch Timer Recording within the
specified time, press [STOP C].

Hint
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.

Note
• If VHS One-touch Timer Recording is completed
during HDD/DVD playback or recording, the VHS
will be in stop mode and the HDD/DVD keeps the
current mode.
• You cannot use the pause function during Onetouch Timer Recording.
• When One-touch Timer Recording is finished and
the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed.

94

EN

1
2

Press [VCR].

3

Enter the number of recordings you
want to skip using
[the Number buttons] within 30
seconds.

4

Press [FWD D] or [REV E] to start
index search.

Press [SEARCH] so that the index
search menu appears.

If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press
[REV E].
After index search, the VHS will play back the
tape automatically.

Note
• This function is not available during recording.
• Every time a tape is recorded, an index mark is
written on the tape.
• You can make the index mark up to 20.

E3NG0FD_EN.book Page 95 Wednesday, January 30, 2008 10:37 AM

VHS
This feature allows you to go to a specific point on a
tape by entering the exact amount of time you want to
skip in order to reach the point.

3

Enter your desired time to skip using
[the Number buttons] within 30
seconds.

4

Press [FWD D] or [REV E] to start
time search.

Press [SEARCH] repeatedly until the
time search menu appears.

Different countries use different television colour
systems.
This unit will distinguish the video colour system
(SECAM, PAL or MESECAM) automatically according
to the format of a pre-recorded video tape during
playback or the input signal from the tuner or external
devices.
To change the video colour system manually, press
[MODE].
Each time you press [MODE], the colour system will
change as follows.

AUTO

Note

Other Operations

This unit will record and playback Hi-Fi stereo sound.
In addition, it has an A2 and NICAM stereo sound
decoder. This unit will receive stereo and bilingual
broadcasts and it is possible to record in several ways
and to play back the sound.
Selecting the Sound Mode
You can select each mode by pressing [AUDIO D]
on the remote control. Each mode is indicated on the
TV screen as following.
• During playback of the recorded tape in Hi-Fi mode
Mode

Audio output

Stereo Stereo

Display on
the TV screen
STEREO

L

L audio from both speakers

LEFT

R

R audio from both speakers

RIGHT

Normal Monaural

MONO

• During reception of bilingual broadcasts
Mode

Audio output

Display on
the TV screen

Main

Main audio from the both
speakers

Main

Sub

Sub audio from the both
speakers

Sub

• Main audio from the left
Main /
speaker
Sub • Sub audio from the right
speaker

VHS Functions

Note

Main
Sub

Note
Others

• Still / Slow / Pause mode will be automatically
cancelled after 5 minutes to prevent damage to the
tape and the video head.
• To return to normal play back from the Picture
Search / Still / Slow mode, press [PLAY B].

Hi-Fi Stereo Sound System

Function Setup

To cue or review picture during playback
(Picture Search):
Press [FWD D] or [REV E] during playback.
Press it again and the unit will search in super high
speed (in the LP mode only).
To freeze the picture on TV screen during
playback (Still mode):
Press [PAUSE F]. Each time you press the button,
the picture will be forwarded frame by frame.
If the picture begins to vibrate vertically during the still
mode, stabilise the picture by pressing the
[PROG. G \ H]. If the picture is distorted or rolling
vertically, adjust the vertical hold control on your TV, if
equipped.
To reset the tape counter:
Press [CLEAR].
To play back in slow forward motion:
During playback, press [PAUSE F], then press
[FWD D].
If the noise bars appear on the TV screen, you can
reduce it by pressing [PROG. G \ H]. Slow reverse
is not available in VHS mode.

Note
• If the playback picture on the TV screen is black and
white, change the video colour system manually.
• When you change the video colour system
manually, be sure to change it before recording. If
you select the wrong video colour system for
recording, the colour of the picture may be
deteriorated.

Editing

VHS
Press [VCR] first.

MESECAM

Playback

• This function is not available during recording.
• Press [STOP C] to stop the search.
• If the tape reaches the end during the search, this
unit will cancel it and rewind the tape.
• You can set the time up to 9:59.

PAL

Recording

If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press
[REV E].
After index search, the unit will play back the tape
automatically.

SECAM

Basic Setup

Press [VCR].

Changing the Video Colour
System

Connections

1
2

Introduction

Time Search

• If you play back non-Hi-Fi tapes, the unit will play
back automatically in monaural even if you select
any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.

EN

95

E3NG0FD_EN.book Page 96 Wednesday, January 30, 2008 10:37 AM

Others
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore
proper operation.

GENERAL

POWER

Symptom

96

EN

Remedy

The power does not turn on.

• Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.

The unit turns on automatically without any
operation.

• The unit turns on automatically 2 seconds before the timer recording.

The unit does not function.

• “ ” or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted.

No picture, sound or menu appears on the
screen.

• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Check if a correct external input channel is selected on your TV.
(See page 22.)
• Check if you have completed “Channel” setting. (See pages 25-31.)

“Clock” setting and “Channel” setting cannot
be performed.

• If a recording is in progress, these operations cannot be performed.

The unit does not operate properly.

• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates.
(See page 3.)

The clock display does not appear on the
front panel display.

• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker and “Clock” setting.

When you forget the password for parental
lock.

• Please cancel the password and the set level. (See page 86.)

DV signal cannot be input.

• Before connection, turn on the power supplies for both this unit and the
DVC, and make sure that these units have stopped.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other
types of signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC
with another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognised after connection, turn off the power supply
for the unit and re-connect the DVC.

The DVC cannot be operated with this unit.

• Signal input or DVC operation from this unit may be disabled depending
on the type of DVC.
• If a DVC signal cannot be input, use an external input (AV2/AV3) for
analogue connection via audio/video cables. Use Scart adaptor for
connecting to AV2.
• DVC control may be disabled depending on the type of DVC, even in a
mode other than camera mode. In this case, switch to DVD control and
execute the normal recording procedure while operating the DVC.

Certain functions of the DVC cannot operate.

• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow
playback function is disabled.
• With DV (AV4), the disc display menu does not appear unless disc
playback is executed.

DV audio signal cannot be switched.

• For recording with the DVC, the recording audio signal can be set to 12
bits or 16 bits. However, when 16-bit recording mode is selected, audio
signal cannot be switched. To record an audio signal, set it to 12 bits.

No image from HDMI connection.

• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• If the unit is connected to the unauthorised display device with an HDMI
cable, the audio and video signals may not be output when playing back
a commercial DVD-video.

E3NG0FD_EN.book Page 97 Wednesday, January 30, 2008 10:37 AM

• The channels may be set to be skipped. (See page 26.)

The external input channels (such as AV2 or AV3)
cannot be skipped.

• This unit does not skip the external input channels. This is not a
malfunction.

Timer recording cannot be performed.

• The internal clock of the unit may have been stopped due to a power
failure that lasted for more than 30 seconds. Reset the clock. (See page
36.)

Recording is impossible.

• Check if the disc is CPRM compatible. Copy-once programmes can only
be copied onto the disc which is CPRM compatible.
• Check if the disc is protected or finalised. Undo the protection or the
finalisation.
• Video mode DVD-RW once formatted in other unit cannot be recorded in
this unit unless formatted in this unit.
• Check if the connections are made securely and correctly.

“Repairing” appears on the TV screen.

• If there is a power failure or unplugging during recording, finalising,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
• It may take several minutes up to about several hours.

RECORDING

HDD / DVD

• It is prohibited to make a recording from 2 minutes before the
programmed start time of a timer recording.
• This unit cannot record programmes that contain copy protection signal.
This is not a malfunction.
• The space of the recording media may be used up. Try deleting
unnecessary titles, or exchange it with the recordable media.
• The maximum number of titles or chapters has exceeded. Delete the
unnecessary titles to make enough space or insert a new recordable
media.
• Check if the connections are made securely and correctly.

Repairing

In a case you intend to cancel the repairing
process.
Do you want to cancel a repairing
process? When selecting “Yes”,
the disc may not be usable.

Playback

Recording is impossible.

Recording

• Try pressing [INPUT SELECT F] repeatedly.
• Turn on all connected devices.
• Check if the connections are made securely and correctly.

Basic Setup

The image from the external device cannot be
displayed.

Connections

Only specific channels do not appear.

GENERAL

CHANNEL

Remedy
• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Try “Channel” setting by following the steps on pages 25-31.

DVD

Introduction

Symptom
TV channels cannot be changed.

• If you intend to cancel the repairing process, press [A OPEN\CLOSE]
on the front panel, then select “Yes” and press [ENTER]. After that, press
[OPEN\CLOSE A] to take out the disc. The disc cancelled during the
repairing process MAY NOT work.

Editing

Yes
No

Repairing

VHS
GENERAL

” does

100% ” may remain on screen for the
• “ Writing to Disc
maximum of 20 seconds even after it reached 100%. This is not a
malfunction.

Recording does not start immediately after
pressing [REC I].

• Make sure the videotape has a recorded tab when you record to a
videotape. If needed, cover the hole with cellophane tape.

TV aspect ratio does not match your TV
screen.

• Check “TV Aspect” setting. (See page 90.)
• A different aspect ratio will be used when the aspect ratio specified by
the disc is not supported by this unit.

Playback picture is distorted.
Colour of the picture is abnormal.

• During fast forward or fast reverse, playback picture may be distorted.
This is not a malfunction.
• Connect to TV directly. When you connect this unit with the television via
VCR or other devices, the picture may be distorted due to the copyprotection signal.
• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances, such as a
cellular phone, away.

There is no sound, or no subtitle.

•
•
•
•

VHS Functions

PLAYBACK

100%

Function Setup

The indication
“ Writing to Disc
not disappear.

EN

Others

Turn on all connected devices.
Check if the external input channel is set correctly.
Check if the connections are made securely and correctly.
If using the HDMI connection, sound is not output when “HDMI Audio” is
set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• If using the HDMI connection, check whether the output format of this
unit (HDMI FORMAT) matches the supported input format of other
connected device.

97

E3NG0FD_EN.book Page 98 Wednesday, January 30, 2008 10:37 AM

HDD/DVD
HDD

• When DVD recording finishes during HDD playback, the unit will stop the
HDD playback, and start writing data to the DVD. This is not a
malfunction.

Playback cannot be performed.

• Check if the playable disc is inserted.
• Check if the disc is loaded correctly with the labelled side facing up.
• Discs made on other devices or on personal computers cannot be played
back on this unit unless it is finalised on the device.
• Even if it is finalised, the performance of those discs are not guaranteed
on this unit.
• The disc may be dirty or flawed. Clean the disc.
• Check if all the connections are made correctly.
• Check “Parental Lock” setting. (See page 86.)
• Playback of DVD is prohibited from 2 minutes before the programmed
start time of a timer recording when the recording media is DVD.

There is no sound, or no subtitle.

• Check if all the connections are made correctly.
• Check if the “Audio Out” is set correctly. (See pages 86-87.)
• There is a possibility that the selected subtitle language is not supported
by the disc.

Digital audio setting cannot be changed to
main audio (L), sub audio (R) or combination
of both.

• If the audio source is in the Dolby Digital format, set “Dolby Digital”
setting to “PCM” in “Playback” menu. (available only for DVD) (See page
87.)

Audio language or the subtitle language of the
DVD cannot be changed.

• Multilingual subtitles are not supported by the disc.
• Some audio languages or the subtitle languages can be changed only
from the disc menu. Please refer to the disc’s manual.

Angles cannot be changed.

• Even though the multi-angle feature is supported by the disc, that does
not mean all the scenes are shot from multi-angles. Changing angles is
available only for those scenes shot from the multi-angle.

The disc cannot be played back on other
player even though it is finalised properly.

• Some DVD players do not play back the disc made on other recorder.
Refer to the manual of the unit.

Picture noise appears.

• Adjust tracking control for better picture by pressing [PROG. G \ H]
while you are playing back a videotape.
• Head cleaning for VHS may be necessary.
Refer to “AUTO HEAD CLEANING” on page 5.

The unit does not play back the videotape.

• Check if a videotape is in this unit.

The motor rotates even when playback /
recording is stopped.

• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.

Titles cannot be edited or deleted.

• The titles or the disc itself may be protected. Cancel the protection by
following the steps on page 80 for title protection and page 58 for disc
protection.

Dubbing cannot be executed.

• When the number of the titles or the chapters exceeds the maximum
recordable number, the dubbing will not be executed.

Titles cannot be edited or deleted.

• The titles in the DVD+R/-R cannot be edited or deleted if they are
finalised. If it is DVD-RW, undo the finalisation by following the steps on
page 59.

The capacity of the disc doesn’t increase
even if the recorded programme is deleted.

• With DVD+RW and video mode DVD-RW, the disc space will increase
only when the last title is deleted. With DVD-R/+R, deleting a title will not
increase the disc space.

Dubbing cannot be executed.

• Check if the disc is compatible for recording. (See page 37.)

DVD

HDD playback suddenly stops.

HDD / DVD
EDITING
DVD
REMOTE CONTROL

98

EN

Remedy
• Resume function may be activated. Refer to page 66 to cancel the
resume point.

VHS

PLAYBACK

Symptom
Playback does not start from the beginning.

The remote control does not function.

• No batteries in the remote control or the batteries may be weak. Replace
the batteries.
• Make sure there is no obstacle between the remote control and the unit.
• Try getting closer to the unit. (See page 14.)
• If above solutions do not solve the problem, please call an Authorised
Service Centre.

E3NG0FD_EN.book Page 99 Wednesday, January 30, 2008 10:37 AM

Error message

• Insert a standard disc. (See pages 9-10.)
• Insert the disc with the labelled side facing
up.

Region Error
— Please eject the disc. —
Playback is not authorized in
your region.

• Playback is not authorised in the region of
the DVD-Video that you inserted in the
unit.

• Insert a DVD-Video with region codes 2 or
ALL.

Parental Lock On
The current selected parental
level prohibits playback.

• The current selected parental level in
“Setup” menu prohibits playback.

• Check the “Parental Lock” setting.
(See page 86.)

Recording Error
This programme is not allowed to
be recorded.

• The recording function encountered a
copy prohibited programme.
• Original source is in NTSC system.

• You cannot record copy prohibited
programmes.

Recording Error
This programme is not
recordable in Video mode.

• You are trying to record a copy-once
programme onto a DVD-RW disc in Video
mode.

• Set “Format Mode” to “VR mode”.
(See page 39.)

Recording Error
Can not record on this disc.

• You are trying to record onto a disc that is
unrecordable, or the disc status does not
satisfy recording requirements.
• The disc is dirty.
• The disc is damaged.
• You are trying to record onto a VR mode
DVD-RW disc which contained recordings
from another recorder.

• Insert a recordable disc, and ensure the
disc status satisfies the recording
requirements. (See page 37.)
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Disc may need formatting.

Recording Error
This programme is not allowed to
be recorded on this disc.

• You are trying to record a copy-once
programme onto a DVD disc that is not
compatible with CPRM.

• Insert a ver. 1.1 or ver. 1.2 DVD-RW disc
(compatible with CPRM.)

Recording Error
This disc is protected and not
recordable.

• You are trying to record onto the VR mode
DVD-RW, DVD+RW / +R disc that is set
as protected in “Setup” Menu.

• Remove the disc protect setting in “DVD
Menu” menu. (See page 58.)

Recording Error
Disc is full.
(No area for new recording)

• You are trying to record onto the VR mode
DVD-RW disc that has no space for
recording.

• Insert a recordable disc with enough
recording space.
• Delete unnecessary original titles.
(See page 76.)

Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)

• You are trying to record onto the
DVD-RW / -R disc on which the number of
recorded titles has reached the maximum
(99).

• Delete unnecessary original titles.
(See page 76.)

Recording Error
You cannot record more than
999 chapters on one disc.
(The maximum is 999)

• You are trying to record onto the VR mode
DVD-RW disc on which the number of
recorded chapters has reached the
maximum (999).

• Delete unnecessary chapter mark from an
Original list. (See pages 78 - 79.)

Recording Error
You cannot record more than 49
titles on one disc.
(The maximum is 49)

• You are trying to record onto the
DVD+RW/+R disc on which the number of
recording titles comes up to the maximum
(49).

• Delete unnecessary titles. (See page 76.)

Recording Error
You cannot record more than
254 chapters on one disc.
(The maximum is 254)

• You are trying to record onto the DVD+RW
disc on which the number of recording
chapters comes up to the maximum (254).

• Delete unnecessary chapter marks.
(See pages 78 - 79.)

Recording Error
You cannot record on this disc as
Control Information is full.

• This disc has no space to write Control
Information when recording or deleting
contents.
• When editing has been repeatedly
performed, the control information area
may become full even though the
recording area has enough space.

• Delete unnecessary original titles.
(See page 76.)

Recording Error
You cannot record on this disc as
Power Calibration Area is full.

• When recordings are performed
repeatedly onto an unstable disc, this area
may become full.
• Every time you insert a disc for recording,
part of the disc’s working area will be
used. If you repeat this frequently, it will be
used up quicker and you may not be able
to record maximum number of titles for the
disc.

• Insert a new disc.

Recording Error
This disc is already finalised.

• You are trying to record onto a disc that is
already finalised.

• Release the finalising for the disc. (See
page 59.)

Connections

Solution

• An unplayable disc is inserted in the unit.
• The disc is upside down.

Introduction

Cause

Disc Error
— Please eject the disc. —
Playback feature may not be
available on this disc.

Basic Setup
Recording
Playback
Editing
Function Setup
VHS Functions
Others

EN

99

E3NG0FD_EN.book Page 100 Wednesday, January 30, 2008 10:37 AM

Error message

Cause

Solution

Recording Error
The disc has no recording
compatibility.
Set “Make Recording
Compatible” to “ON” to convert
the disc.

• You are trying to record onto the
unfinalised +VR mode discs recorded on
other unit.

• Set “Make Recording Compatible” to “ON”
to rewrite the menu, after that you will
record to disc. (See page 39.)

Recording Error
You cannot record more than
600 titles on HDD. (The
maximum is 600).

• You are trying to record onto the HDD
when total title number is already at its
limit.

• Delete unnecessary titles. (See page 76.)

Recording Error
HDD is full.
(No area for new recording)

• There is not enough space on the internal
HDD.

• Delete unnecessary titles. (See page 76.)

* If you are still having trouble with the unit after checking all the Troubleshooting points, write down the error code
and the error description and consult your dealer or an authorised service centre.

100 EN

E3NG0FD_EN.book Page 101 Wednesday, January 30, 2008 10:37 AM

Language

Code

Language

Code

Language

Code

Language

Code

Afar

4747

Frisian

5271

Macedonian

5957

Singhalese

6555

Afrikaans

4752

Galician

5358

Malagasy

5953

Siswat

6565

Albanian

6563

Georgian

5747

Malay

5965

Slovak

6557

Amharic

4759

German

5051

Malayalam

5958

Slovenian

6558

Arabic

4764

Greek

5158

Maltese

5966

Somali

6561

Armenian

5471

Greenlandic

5758

Maori

5955

Spanish

5165

Assamese

4765

Guarani

5360

Marathi

5964

Sundanese

6567

Aymara

4771

Gujarati

5367

Moldavian

5961

Swahili

6569

Azerbaijani

4772

Hausa

5447

Mongolian

5960

Swedish

6568

Bashkir

4847

Hebrew

5569

Nauru

6047

Tagalog

6658

Basque

5167

Hindi

5455

Nepali

6051

Tajik

6653

Bengali;Bangla

4860

Hungarian

5467

Norwegian

6061

Tamil

6647

Bhutani

5072

Icelandic

5565

Occitan

6149

Tatar

6666

Bihari

4854

Indonesian

5560

Oriya

6164

Telugu

6651

Bislama

4855

Interlingua

5547

Oromo (Afan)

6159

Thai

6654

Breton

4864

Interlingue

5551

Panjabi

6247

Tibetan

4861

Bulgarian

4853

Inupiak

5557

Pashto; Pushto

6265

Tigrinya

6655

Burmese

5971

Irish

5347

Persian

5247

Tonga

6661

Byelorussian

4851

Italian

5566

Polish

6258

Tsonga

6665

Cambodian

5759

Japanese

5647

Portuguese

6266

Turkish

6664

Catalan

4947

Javanese

5669

Quechua

6367

Turkmen

6657

Chinese

7254

Kannada

5760

Rhaeto-Romance

6459

Twi

6669

Corsican

4961

Kashmiri

5765

Romanian

6461

Ukrainian

6757

Croatian

5464

Kazakh

5757

Russian

6467

Urdu

6764

Czech

4965

Kinyarwanda

6469

Samoan

6559

Uzbek

6772

Danish

5047

Kirghiz

5771

Sangho

6553

Vietnamese

6855

Dutch

6058

Kirundi

6460

Sanskrit

6547

Volapuk

6861

English

5160

Korean

5761

Scots Gaelic

5350

Welsh

4971

Esperanto

5161

Kurdish

5767

Serbian

6564

Wolof

6961

Estonian

5166

Laothian

5861

Serbo-Croatian

6554

Xhosa

7054

Faroese

5261

Latin

5847

Sesotho

6566

Yiddish

5655

Fiji

5256

Latvian; Lettish

5868

Setswana

6660

Yoruba

7161

Finnish

5255

Lingala

5860

Shona

6560

Zulu

7267

EN101

Others

6550

VHS Functions

Sindhi

Function Setup

5866

Editing

Lithuanian

Playback

5264

Recording

French

Basic Setup

4748

Connections

Abkhazian

Introduction

Language Code

E3NG0FD_EN.book Page 102 Wednesday, January 30, 2008 10:37 AM

Glossary
Analogue audio
An electrical signal that directly
represents sound. In contrast,
digital audio can also be an
electrical signal, but is an indirect
representation of sound. See also
“Digital audio”.
Aspect ratio
The width of a TV screen relative to
its height. Conventional TVs are 4:3
(i.e., the screen is almost square).
Widescreen models are 16:9 (the
screen is almost twice as wide as its
height).
Chapter
Just as a book is split up into
several chapters, a title on an HDD/
DVD is usually divided into
chapters. See also “Title”.
Component video output
Each signal of luminance(Y) and
component (PB/CB, PR/CR) is
independent to output so that you
can experience picture colour as it
is.
Also, due to compatibility with
progressive video (576p/480p), you
can experience higher-density
picture than that in interlace (576i/
480i).
CPRM
(Content Protection for
Recordable Media)
CPRM is a scrambling copy
protection system for the protection
of “copy-once” broadcast
programmes (e.g. some satellite
broadcasts).
Digital audio
An indirect representation of sound
using numbers. During recording,
the sound is measured at discrete
intervals (44,100 times a second for
CD audio) by an analogue-to-digital
converter, generating a stream of
numbers. On playback, a digital-toanalogue converter generates an
analogue signal based on these
numbers. See also “Sampling
frequency” and “Analogue audio”.
Dolby Digital
A system developed by Dolby
Laboratories that compresses
digital sound. It works with stereo
(2ch) or multi-channel audio.
DTS
(Digital Theater System)
DTS is a multi channel surround
sound system. By connecting to
DTS decoder, you can enjoy
dynamic and realistic sound like
movie theatre. DTS surround sound
technologies were developed by
DTS, Inc.

102 EN

Finalise
To make DVDs that have been
recorded playable in DVD players. It
is possible to finalise DVD-RW/-R
and DVD+RW/+R discs with this
unit.
HDMI
(High Definition Multimedia
Interface)
A digital interface between audio
and video source. It can transmit
component video, audio, and control
signal with one cable connection.
JPEG
(Joint Photographic Experts
Group)
JPEG is a method of compressing
still image files. You can copy JPEG
files on CD-RW/-R discs from a
computer and play back the files on
this unit.
MP3
(MPEG Audio Layer 3)
MP3 is a method of compressing
files. You can copy MP3 files on
CD-RW/-R discs from a computer
and play back the files on this unit.
PBC (Video CD only)
(Playback Control)
This function enables you to play
back interactive software using a
menu screen. See also “Title”.
PCM
(Pulse Code Modulation)
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can
play back sounds as realistic as
possible by converting even
compressed Dolby Digital and
MPEG audio to PCM.
Playlist
From this list, you can play back
contents of a disc in your desired
order or in sequence. It is also
possible to directly search for a
specific scene.
Progressive Scan (576p/480p)
A type of display that does not split
each frame into fields, and instead
scans directly through all the
scanlines of each frame in order.
Progressive Scan provides less
flickering and higher image
resolution than traditional (576i/
480i) TV signals. Refer to pages 20
to 21 and 90 for instructions on the
Progressive Scan mode selection.

Region code
Regions associate discs and
players with particular areas of the
world. This unit will only play back
discs that have compatible region
codes. You can find the region code
of your unit by looking on the rear
panel. Some discs are compatible
with more than one region (or all
regions).
Sampling frequency
The rate at which sound is
measured by a specified interval to
turn it into digital audio data. The
number of samples in one second is
defined as the sampling frequency.
The higher the rate is, the better the
possible sound quality.
Title
(HDD/DVD)
A collection of chapters on an HDD/
DVD. See also “Chapter”.
(Video CD)
The contents of a Video CD. When
playing back a Video CD with the
PBC function, the Title Menu will
appear automatically.
Track
Audio CDs and Video CDs use
tracks to divide the contents of a
disc. The DVD equivalent is called a
chapter. See also “Chapter”.
Video mode
Video mode is the same recording
format as used on the DVD-Videos
you purchase in local shops. You
can play back the discs recorded in
this format in most DVD players,
however it offers only limited editing.
You will need to finalise discs
recorded in Video mode before
playing them back on other unit.
VR mode
A basic recording format for
DVD-RW. VR mode offers advanced
editing, and you can record and edit
material repeatedly, however it is
playable only on VR mode
compatible unit. Finalisation is
recommended before playing them
back on other unit.
+VR mode
A recording format for DVD+RW/+R.
+VR mode offers basic editing, and
it is playable on most DVD players.
Finalisation is recommended before
playing them back in other unit.

E3NG0FD_EN.book Page 103 Wednesday, January 30, 2008 10:37 AM

Introduction

Specifications
General
System

HDD, DVD-Video, DVD-RW/-R, DVD+RW/+R, Video CD,
CD-DA, CD-RW/-R, Videotape
Four heads

HDD

Internal 3.5 inch HDD 160 GB

Power requirements

220–240 V

Connections

VHS video heads

± 10%, 50 Hz ± 0.5%

Power consumption

48 W (standby: 8.0 W)

Weight

5.8 kg
435 x 99.5 x 388 mm

Operating temperature

5°C to 40°C

Operating humidity

Less than 80% (no condensation)

TV format

PAL-B/G, SECAM-LL’

Basic Setup

Dimensions (width x height x depth)

Recording
Video Recording (VR) format (DVD-RW only), Video format
(DVD-RW, DVD-R), +VR format (DVD+RW, DVD+R)

Recordable discs

DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable

Video recording format
Sampling frequency
Compression format

13.5 MHz
MPEG

Audio recording format
Sampling frequency
Compression format

48 kHz
Dolby Digital

Recording

Recording format

Analogue channels
L (SECAM L)
BG (PAL B/G)

F1 - E69
E2 - E69

DVB-T channels
VHF
UHF

F5 - F10
E21 - E69

Playback

Tuner

Editing

Input/Output
Front Panel : (AV3)
One RCA connector
1 Vp-p (75 Ω)

Audio input
Input level

Two RCA connectors
2 Vrms (input impedance: more than 10 kΩ)

DV input
DV 4-pin jack

IEEE 1394

Function Setup

Video input
Input level

Rear Panel :
VHF/UHF antenna input/output terminal

75 Ω

Two 21-pin scart sockets (AV1, AV2)
1 Vp-p (75 Ω) each

Component video output
Output level

Three RCA connectors
Y: 1.0 Vp-p (75 Ω)
PB/CB, PR/CR: 0.7 Vp-p (75 Ω) each

Audio output
Output level

Two RCA connectors
2 Vrms (output impedance: 680 Ω)

Digital audio output
Output level

One Coaxial pin jack
500 mVp-p (75 Ω)

HDMI output

HDMI jack

Others

Two 21-pin scart sockets (AV1, AV2)

Video input /output
Input /output level

VHS Functions

Audio input /output

Note
The specifications and design of this product are subject to change without notice.

EN103

</pre><hr>Source Exif Data: <br /><pre>File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2008:01:30 10:36:05Z
Modify Date                     : 2008:01:30 15:50:18+09:00
Metadata Date                   : 2008:01:30 15:50:18+09:00
Creator Tool                    : FrameMaker 7.2
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:a3161c49-43df-46ef-afdb-2bd92f850c60
Instance ID                     : uuid:eb40a4b8-3fb3-4d46-b903-72bd6932aba1
Has XFA                         : No
Page Count                      : 103
Author                          : 
</pre>
<small>EXIF Metadata provided by <a href="https://exif.tools/">EXIF.tools</a></small>

<div id="ezoic-pub-ad-placeholder-110">
<script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<!-- usermanual link ad -->
<ins class="adsbygoogle"
     style="display:block"
     data-ad-client="ca-pub-0545639743190253"
     data-ad-slot="6172135303"
     data-ad-format="link"></ins>
<script>
(adsbygoogle = window.adsbygoogle || []).push({});
</script>
</div>
</div>
				<div id="catlinks" class="catlinks catlinks-allhidden" data-mw="interface"></div>				<div class="visualClear"></div>
							</div>
		</div>
		<div id="mw-navigation">
			<h2>Navigation menu</h2>

			<div id="mw-head">
									<div id="p-personal" role="navigation" class="" aria-labelledby="p-personal-label">
                                                 <!--                              <div id="p-search" role="search">

                                                <form action="https://usermanual.wiki/search.php" id="searchform">
                                                        <div id="simpleSearch">
                                                        <input type="search" name="search" placeholder="Search UserManual.wiki" title="Search UserManual.wiki [ctrl-option-f]" accesskey="f" id="searchInput" tabindex="1" autocomplete="off"><input type="hidden" value="Special:Search" name="title"><input type="submit" name="go" value="Go" title="Find a User Manual" id="searchButton" class="searchButton">                                                 </div>
                                                </form>
                                        </div>-->
                                                <ul>
<li id="pt-mycontris"><a href="https://usermanual.wiki/upload" title="Upload User Manual" accesskey="y">Upload a User Manual</a></li>
</ul>
					</div>
									<div id="left-navigation">
										<div id="p-namespaces" role="navigation" class="vectorTabs" aria-labelledby="p-namespaces-label">
						<h3 id="p-namespaces-label">Versions of this User Manual:</h3>
						<ul>
 <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/Toshiba/ToshibaRdXv48DtkfUsersManual132045.1562966546" title="User Manual Wiki" accesskey="c">Wiki Guide</a></span></li> <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/Toshiba/ToshibaRdXv48DtkfUsersManual132045.1562966546/html" title="HTML" accesskey="c">HTML</a></span></li> <li id="ca-nstab-main"><span><a href="https://usermanual.wiki/Toshiba/ToshibaRdXv48DtkfUsersManual132045.1562966546/amp" title="Mobile AMP" accesskey="c">Mobile</a></span></li> <li id="ca-nstab-main" class="selected" ><span><a href="https://usermanual.wiki/Toshiba/ToshibaRdXv48DtkfUsersManual132045.1562966546/help" title="Discussion / FAQ / Help" accesskey="c">Download & Help</a></span></li>
													</ul>
					</div>
									</div>
				<div id="right-navigation">
										<div id="p-views" role="navigation" class="vectorTabs" aria-labelledby="p-views-label">
						<h3 id="p-views-label">Views</h3>
						<ul>
													
		<li id="ca-view"><span><a href="#">User Manual</a></span></li>

                                                                                                                        <li  class="selected"  id="ca-edit"><span><a href="https://usermanual.wiki/Toshiba/ToshibaRdXv48DtkfUsersManual132045.1562966546/help" title="Ask a question" accesskey="e">Discussion / Help</a></span></li>

													</ul>
					</div>
									</div>
			</div>
			<div id="mw-panel">
				<div id="p-logo" role="banner"><a class="mw-wiki-logo" href="https://usermanual.wiki/Main_Page" title="Visit the main page"></a></div>
						<div class="portal" role="navigation" id="p-navigation" aria-labelledby="p-navigation-label">
			<h3 id="p-navigation-label">Navigation</h3>

		</div>
			<div class="portal" role="navigation" id="p-tb" aria-labelledby="p-tb-label">


		</div>
				</div>
		</div>
		<div id="footer" role="contentinfo">
							<ul id="footer-info">
											<li id="footer-info-lastmod">© 2025 UserManual.wiki</li>
									</ul>
							<ul id="footer-places">
											<li id="footer-places-privacy"><a href="https://usermanual.wiki/ContactUs" title="UserManual.wiki:Contact Us">Contact Us</a></li>
											<li id="footer-places-about"><a href="https://usermanual.wiki/DMCA" title="UserManual.wiki:DMCA">DMCA</a></li>
									</ul>
										<ul id="footer-icons" class="noprint">
											<li id="footer-poweredbyico">

</li>
									</ul>

		</div>

</div></body></html>
<script src="/cdn-cgi/scripts/7d0fa10a/cloudflare-static/rocket-loader.min.js" data-cf-settings="154eab9c4633f98672dfa6df-|49" defer></script>