TouchTunes Interactive Networks 700773-001 RF MODULE User Manual
TouchTunes Interactive Networks RF MODULE
User manual
Model: 700773-001 Product Name: RF MODULE User’s Manual A. Installation 1. Plug the USB cable to a USB port of your computer. 2. Depends on the operating system on the computer, install the appropriate WIFI software driver a. User can follow the below steps to install driver b. Connect the RF module to PC through USB. c. Open “Device Manager” in Windows d. In “Other Device”, user should see a “802.11n WLAN NIC” device as shown above. Right click the device and select “Driver update” e. From the driver files provided, select the corresponding driver according to the OS. f. Follow the on screen instruction to complete driver update. g. User can connect to WiFi networks when driver update completed. B. Testing the Product: 1. WIFI function: On the computer, select this WIFI device for connecting to your 802.11b/g/n network FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful int erference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to rad io communications. However, there is no guarantee that interference will not occur in a particular install ation. If this equipment does cause harmful interference to radio or television reception, which can be d etermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference receiv ed, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi fications to this equipment. Such modifications could void the user’s authority to operate this equipmen t. IC Compliance This device complies with Industry Canada license‐ exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cau se interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts d e licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire d e brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si l e brouillage est susceptible d’en compromettre le fonctionnement. RF Radiation Exposure Statement The device has been evaluated to meet FCC and RSS-102 general RF exposure requirement. The device can be used in should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Ming Mr. Create Date : 2015:09:24 15:52:25Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2015:09:24 18:25:25+08:00 Metadata Date : 2015:09:24 18:25:25+08:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:b9d4babb-218a-476c-beef-c84258667a09 Instance ID : uuid:0743a1d3-f0fc-4d2e-8d86-d24fb28765c5 Page Count : 3 Author : Ming Mr.EXIF Metadata provided by EXIF.tools