7106507249 Archer VR300 V1 QIG
2017-06-02
: Tp-Link 7106507249 Archer Vr300 V1 Qig 7106507249_Archer VR300_V1_QIG
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
1. Connect the Hardware Phone Jack Quick Installation Guide AC1200 Wireless VDSL/ADSL Modem Router Power Adapter 3 Push in to turn on the modem router. Phone Cable VR300 1 4 ON/OFF Wait for about 1 to 2 minutes, then verify that the LED is slowly flashing orange before continuing. LINE Power DSL Splitter ON/OFF RESET WPS PHONE MODEM LAN2 LAN3 LAN4/WAN 2 Modem Router DSL Phone Cable Phone (Optional) Note: If the LED turns solid orange, refer to FAQ > Q2. If you don’t need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection. 2. Configure the Modem Router Before You Start Method 1: Via Web Browser Method 2: Via TP-Link Tether App 1. You'll usually need an internet service username and password, given to you by your internet service provider (ISP) when you first signed up with them. If you are unsure, please check with your ISP. 1. Connect your device to the router using an Ethernet cable or wirelessly. 1. Download the TP-Link Tether app. 2. Find the product label at the bottom of your router. Printed on the label are your router's default SSIDs (network names) and wireless password. SSIDs (network names) and wireless password are on the product label. Power ON/OFF RESET WPS LAN2 LAN3 LAN4/WAN or Ethernet Cable DSL 2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a password and get started. Note: If the login page does not appear, please refer to FAQ > Q1. http://tplinkmodem.net Scan to download 2. Connect your smartphone to the router. SSIDs (network names) and wireless password are on the product label. 3. Launch the Tether app and select Archer VR300. New Password Low Middle High Confirm Password Let’s Get Started Device Local Device Archer VR300 50-C7-BF-02-EA-DC 3. Follow the step-by-step instructions to set up an internet connection and register the TP-Link Cloud service. Now you can enjoy your internet. 4. Follow the steps to connect to the internet and register the TP-Link Cloud service. Now you can enjoy your internet. Already have a modem? TP-Link Cloud Service LED Indicators If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below to set up. TP-Link Cloud service provides a better way to manage your cloud devices. For example: Color 1. Connect the hardware, then wait for about 1 minute for the router to start up. Power Adapter Modem Router Modem Power ON/OFF RESET WPS LAN2 LAN3 LAN4/WAN DSL Ethernet Cable 2. Connect your device to the router via an Ethernet cable or wirelessly. The SSIDs (network names) and wireless password are printed on the product label at the bottom of your router. 3. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a password for router management and get started. Note: If the login page does not appear, please refer to FAQ > Q1. http://tplinkmodem.net Remote Management Easily manage your home network when you are out and about via the Tether app on your smartphone or tablet. Orange Timely Upgrade Notifications Keep informed of the latest firmware updates, ensuring that your router stays at its best. One for All Manage multiple TP-Link Cloud devices, all from a single TP-Link ID. Status Indication Flashing Slowly The system is starting up, or DSL synchronization is complete but there is no internet connection. Flashing Quickly On DSL synchronization failed, or there is no internet connection. On Internet connection is available. Flashing Quickly A wireless device is connecting to the network via WPS, or the system is being reset. Flashing Slowly Blue DSL synchronization is in progress. The firmware is being upgraded. Do not disconnect or power off the modem router. You can set up and enjoy cloud functions via the Tether app or through the web management page at http://tplinkmodem.net. To learn more about TP-Link Cloud service and other useful features supported by the modem router (including Guest Network, Parental Controls, Access Control and more), please refer to the User Guide at www.tp-link.com. For technical support and more information, please visit http://www.tp-link.com/support, or simply scan the QR code. 4. Follow the Quick Setup and select Wireless Router Mode to connect to the internet. If there is no Operation Mode selection page in the Quick Setup, go to the Advanced > Operation Mode page and switch to Wireless Router Mode, then go to Basic > Internet to finish the set up. Now you can enjoy the internet. FAQ (Frequently Asked Questions) 7106507249 REV1.0.0 ©2017 TP-Link Q1. What should I do if I cannot access the web management page? A1. If the computer is set to a static IP address, change its settings to obtain an IP address automatically. A2. Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser. A3. Use another web browser and try again. A4. Reboot your modem router and try again. A5. Disable then enable the network adapter in use. Q2. What should I do if the LED turns solid orange? A1. Check your cables and make sure they are all plugged in correctly, including the telephone lines and power adapter. A2. Restore your modem router to its factory default settings. A3. Remove the DSL splitter, directly connect the modem router to the phone jack and follow this guide to reconfigure the modem router. A4. Contact your ISP (internet service provider) to check the status of your DSL line. A5. If the problem persists, contact our Technical Support. Q3. What should I do if I cannot access the internet? A1. Make sure all telephone and Ethernet cables are correctly and securely connected to the modem router. A2. Try to log in to the web management page of the modem router using the default address at http://tplinkmodem.net or http://192.168.1.1. If you cannot, change your computer settings to obtain an IP address automatically from the modem router. If you can, try the steps below. A3. Ask your internet service provider for the VPI/VCI (or VLAN ID), Connection Type, internet service username and password, and make sure all are correctly entered into your router's management page. A4. Restore the modem router to its factory default settings and reconfigure it by following the instructions in this guide. A5. Please contact our Technical Support if the problem persists. Q4. What should I do if I forget my password? For the web management page: A1. If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it. A2. Alternatively, restore the modem router to its factory default settings and then set a new password. For the Wi-Fi network: A1. The default wireless password/PIN can be found on the product label at the bottom of the modem router. A2. If the default wireless password has been changed, log in to the web management page and go to Basic > Wireless to retrieve or reset your password. Q5. How do I restore the modem router to its factory default settings? A1. With the modem router powered on, press and hold the RESET button on the modem router for approximately 2 seconds until the LED flashes quickly, then release the button. Power ON/OFF RESET WPS LAN2 LAN3 LAN4/WAN RESET Button: Press & Hold for 2 Seconds A2. Log in to the web management page of the modem router. Go to Advanced > System Tools > Backup & Restore and click Factory Restore. The modem router will restore and reboot automatically. DSL
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : Creator : Metadata Date : 2017:05:16 10:25:38+08:00 Modify Date : 2017:05:16 10:25:38+08:00 Create Date : 2017:05:16 10:25:19+09:00 Creator Tool : Adobe Illustrator CC (Windows) Thumbnail Width : 256 Thumbnail Height : 64 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4853 bytes, use -b option to extract) Instance ID : uuid:324b179f-e28e-4dbd-bad3-4b33a6d98e1c Document ID : xmp.did:d8030411-b4b3-3644-acb3-8efd3ef8bfbc Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:17629f19-e4f6-4010-8cfc-c2a3aa34a2a5 Derived From Document ID : xmp.did:d5797296-d098-4170-bc31-4fd5ec644202 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:4AC8B060B8BFE311957AF4B25D46AA52, xmp.iid:d8030411-b4b3-3644-acb3-8efd3ef8bfbc History When : 2014:04:09 18:00:15+08:00, 2017:05:16 10:25:12+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC (Windows) History Changed : /, / Ingredients File Path : /Users/liangmin/Desktop/屏幕快照 2017-05-02 下午4.21.22.png, /Volumes/Public/S说明书（勿删除）/确认/l罗微/2016/Archer C3150(EU&US)2.0 添加云二/二维码.png, /Users/liangmin/Desktop/屏幕快照 2017-05-02 下午5.02.20.png Ingredients Document ID : 0, 0 Ingredients Instance ID : 0, 0 Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : 二维码.png, 屏幕快照 2017-05-02 下午5.02.20.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 450.000088 Max Page Size H : 326.999529 Max Page Size Unit : Millimeters Font Name : ArialMT, Helvetica, TP-LinkAktiv-Regular, TP-LinkAktiv-Bold, TP-LinkAktiv-Medium, TP-LinkAktiv-Light, AdobeSongStd-Light Font Family : Arial, Helvetica, TP-Link Aktiv, TP-Link Aktiv, TP-Link Aktiv, TP-Link Aktiv, Adobe 宋体 Std Font Face : Regular, Medium, Regular, Bold, Medium, Light, L Font Type : Open Type, Type 1, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 6.85, 001.006, Version 1.001, Version 1.001, Version 1.001, Version 1.001, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False Font File Name : arial.ttf, HV__0.PFB; HV__0.PFM, TP-LinkAktiv_Rg.ttf, TP-LinkAktiv.ttf, TP-LinkAktiv_Md.ttf, TP-LinkAktiv_Lt.ttf, AdobeSongStd-Light.otf Plate Names : Black, TP-Link Teal (Spot) Swatch Group Name : 默认色板组, 灰度, 鲜艳 Swatch Group Type : 0, 0, 0 Swatch Colorant Swatch Name : 白色, 黑色, CMYK 红, CMYK 青, C=90 M=30 Y=95 K=30, K=50, PANTONE 427 C, PANTONE 877 C, PANTONE Cool Gray 9 C, TP-Link Teal (Spot), AutoCAD Color 1, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, Lab, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 100.000000, 90.000000, 0.000000, 63.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 30.000000, 0.000000, 0.000000, 96.078402, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 0.000000, 95.000000, 0.000000, 22.999999, 94.509798, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 30.000000, 50.000000, 0.000000, 0.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 0.000000, 0.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant L : 84.313728, 59.607841, 50.196079 Swatch Colorant A : -1, -1, 0 Swatch Colorant B : -1, -1, -2 Producer : Adobe PDF library 10.01 Page Count : 2 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools