7106507249 Archer VR300 V1 QIG

: Tp-Link 7106507249 Archer Vr300 V1 Qig 7106507249_Archer VR300_V1_QIG

Open the PDF directly: View PDF .
Page Count: 2

Quick Installation Guide

VR300

AC1200 Wireless VDSL/ADSL

Modem Router

1. Connect the Hardware

2. Configure the Modem Router

Modem Router

ON/OFF

Note: If the LED turns solid orange, refer

to FAQ > Q2.

3

Wait for about 1 to 2 minutes, then

verify that the LED is slowly

ashing orange before continuing.

Power Adapter

Push in to turn on the

modem router.

4

Phone Cable

Phone Jack

Phone Cable

DSL Splitter

Phone (Optional)

1

2

If you don’t need the phone service, just directly connect the modem router to the phone jack with the

provided phone cable, then follow steps 3 and 4 to complete the hardware connection.

PHONE

LINE

MODEM

LAN2 LAN3 LAN4/WAN DSLPower ON/OFF RESET WPS

SSIDs (network names) and wireless password are on the product label.

Method 2: Via TP-Link Tether App

1. Download the TP-Link Tether app.

or

2. Connect your smartphone to the router.

3. Launch the Tether app and select Archer VR300.

4. Follow the steps to connect to the internet and register the

TP-Link Cloud service.

Scan to download

Device

Local Device

Archer VR300

50-C7-BF-02-EA-DC

Ethernet Cable

LAN2 LAN3 LAN4/WAN DSL

Power ON/OFF RESET

WPS

Method 1: Via Web Browser

1. Connect your device to the router using an Ethernet cable or wirelessly.

SSIDs (network names) and wireless password are on the product label.

http://tplinkmodem.net

HighMiddleLow

Let’s Get Started

Conrm Password

New Password

Note: If the login page does not appear, please refer to FAQ > Q1.

2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.

Create a password and get started.

Now you can enjoy your internet. Now you can enjoy your internet.

3. Follow the step-by-step instructions to set up an internet connection

and register the TP-Link Cloud service.

Before You Start

1. You'll usually need an internet service username and password,

given to you by your internet service provider (ISP) when you first

signed up with them. If you are unsure, please check with your ISP.

2. Find the product label at the bottom of your router. Printed on the

label are your router's default SSIDs (network names) and wireless

password.

FAQ (Frequently Asked Questions)

LAN2 LAN3 LAN4/WAN

DSL

Power ON/OFF RESET WPS

RESET Button: Press & Hold for 2 Seconds

If there is no Operation Mode selection page in the Quick Setup, go to the

Advanced > Operation Mode page and switch to Wireless Router Mode,

then go to Basic > Internet to nish the set up.

4. Follow the Quick Setup and select Wireless Router Mode to connect to

the internet.

Q1. What should I do if I cannot access the web management page?

A1. If the computer is set to a static IP address, change its settings to obtain an IP address

automatically.

A2. Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web

browser.

A3. Use another web browser and try again.

A4. Reboot your modem router and try again.

A5. Disable then enable the network adapter in use.

Q2. What should I do if the LED turns solid orange?

A1. Check your cables and make sure they are all plugged in correctly, including the

telephone lines and power adapter.

A2. Restore your modem router to its factory default settings.

A3. Remove the DSL splitter, directly connect the modem router to the phone jack and

follow this guide to reconfigure the modem router.

A4. Contact your ISP (internet service provider) to check the status of your DSL line.

A5. If the problem persists, contact our Technical Support.

Q3. What should I do if I cannot access the internet?

A1. Make sure all telephone and Ethernet cables are correctly and securely connected to the

modem router.

A2. Try to log in to the web management page of the modem router using the default address

at http://tplinkmodem.net or http://192.168.1.1. If you cannot, change your computer

settings to obtain an IP address automatically from the modem router. If you can, try the

steps below.

A3. Ask your internet service provider for the VPI/VCI (or VLAN ID), Connection Type, internet

service username and password, and make sure all are correctly entered into your router's

management page.

A4. Restore the modem router to its factory default settings and reconfigure it by following the

instructions in this guide.

A5. Please contact our Technical Support if the problem persists.

Q4. What should I do if I forget my password?

For the web management page:

A1. If you are using a TP-Link ID to log in, click Forgot password on the login page and then

follow the instructions to reset it.

A2. Alternatively, restore the modem router to its factory default settings and then set a

new password.

For the Wi-Fi network:

A1. The default wireless password/PIN can be found on the product label at the bottom of

the modem router.

A2. If the default wireless password has been changed, log in to the web management

page and go to Basic > Wireless to retrieve or reset your password.

Q5. How do I restore the modem router to its factory default settings?

A1. With the modem router powered on,

press and hold the RESET button on the

modem router for approximately 2

seconds until the LED flashes quickly,

then release the button.

A2. Log in to the web management page of the modem router. Go to Advanced > System

Tools > Backup & Restore and click Factory Restore. The modem router will restore

and reboot automatically.

If you already have a modem or your internet comes directly from an

Ethernet wall outlet, you can switch to Wireless Router mode. Follow the

steps below to set up.

Already have a modem?

1. Connect the hardware, then wait for about 1 minute for the router to start up.

2. Connect your device to the router via an Ethernet cable or wirelessly.

The SSIDs (network names) and wireless password are printed on the product label at the

bottom of your router.

http://tplinkmodem.net

Note: If the login page does not appear, please refer to FAQ > Q1.

3. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.

Create a password for router management and get started.

Ethernet Cable

Modem

Modem Router

LAN2 LAN3 LAN4/WAN DSLPower ON/OFF RESET WPS

Power Adapter

Now you can enjoy the internet.

©2017 TP-Link

7106507249 REV1.0.0

LED Indicators

Color Status Indication

Orange

Blue

The system is starting up, or DSL synchronization is

complete but there is no internet connection.

DSL synchronization is in progress.

DSL synchronization failed, or there is no internet

connection.

Internet connection is available.

The firmware is being upgraded. Do not disconnect

or power off the modem router.

A wireless device is connecting to the network via

WPS, or the system is being reset.

Flashing Slowly

Flashing Quickly

On

On

Flashing Slowly

Flashing Quickly

TP-Link Cloud service provides a better way to manage your cloud devices.

For example:

TP-Link Cloud Service

Remote Management

Easily manage your home network when you are out and

about via the Tether app on your smartphone or tablet.

Timely Upgrade Notifications

Keep informed of the latest rmware updates, ensuring

that your router stays at its best.

One for All

Manage multiple TP-Link Cloud devices, all from a single

TP-Link ID.

You can set up and enjoy cloud functions via the Tether app or through the

web management page at http://tplinkmodem.net.

To learn more about TP-Link Cloud service and other useful features

supported by the modem router (including Guest Network, Parental Controls,

Access Control and more), please refer to the User Guide at www.tp-link.com.For technical support and more information, please visit

http://www.tp-link.com/support, or simply scan the QR code.