Trane Bmtk Svn01D En Users Manual

2015-01-21

• Contents
• Overview
  • Controller components
    • Termination module
    • Main module
    • Display module
  • Model numbers
  • Tracker controller specifications
  • UCM maximum capacities for Tracker models 12 and 24
  • UCM maximum capacities for Tracker model WSHP
  • Before installation
    • Verify the shipment
    • Inspect for shipping damage
    • Store unused components until needed
  • After installation
  • FCC compliance
• Termination module mounting
  • Select a location for the controller
    • Verify location conformance to controller specifications
    • Verify location conformance to controller dimensions and clearances
    • Verify location conformance to optimal touch screen viewing angles
  • Mount the termination module
    • Securing the termination module to a wall
    • Securing the termination module to a conduit box
    • Installing electrical conduit
• Termination board wiring
  • Wire 24 Vac power
  • Wire optional inputs and outputs
    • Wire the alarm relay
    • Wire the priority shutdown device
    • Wire the utility pulse meter
    • Wire the thermistor
  • Wire the UCMs
    • Wire specifications
    • UCM wiring configurations
    • Termination resistor placement for Comm5 links
    • Wire supported UCMs
    • Requirements for repeaters on Comm5 communication links
• Main module mounting
• Display module mounting
• PC workstation wiring
  • Verify PC workstation specifications
  • Direct connection to PC workstation
  • Modem connection to PC workstation
  • Ethernet connection to PC workstation
    • Connecting over an existing LAN
    • Connecting through a hub
    • Connecting with one cable
• Troubleshooting
  • Troubleshooting components
    • LEDs
    • Service pin buttons and jumper
  • Symptom/action troubleshooting
• Maintenance
  • Cleaning the touch screen
  • Calibrating the touch screen
• Installation checklists
  • Required supplies
  • Optional supplies
  • Comm5 UCM identification and location
  • Pre-installation wiring notes
  • Termination module post-installation checklist
• Declaration of Conformity
• Index