Trane Huvc Horizontal Classroom Unit Ventilator Installation And Maintenance Manual UV SVN02C EN (24 Jan 2013)

2015-04-02

• Warnings, Cautions, and Notices
• Model Number Descriptions
• General Information
  • Unit Description
  • Options
  • Unit Ventilator Controls
• ECM Application Notes
• Dimensions and Weights
  • Unit Location and Clearances
• Receiving and Handling
• Pre-Installation
  • Jobsite Inspection
  • Jobsite Storage
• Installation—Mechanical
  • Location Considerations
  • Unit Mounting
    • Horizontal Recessed Mounting
• Installation—Piping
  • Trane Piping Packages (Option)
  • Split System Units
  • Refrigerant Piping
  • Steam Piping
  • Modulating Water Valves (Option)
  • Plumbing
  • Manual Opener
  • Isolation Valves
    • Installation
    • Servicing/Removal of Valves
  • Heating Coils with Direct Expansion Cooling
• Installation—Sensors
  • Control Options
  • Installing Wall-Mounted Wired Sensors
    • Location Considerations
    • Location Considerations for Wireless Zone Sensors
    • Fan Mode Switch Installation
    • Zone Sensor Installation
  • Wireless Sensors
    • Address Setting
    • Observing the Receiver for Readiness to Associate
    • Associating the Sensor to the Receiver
    • Testing Signal Strength and Battery Status
    • Configuring the Wireless Display Sensor (Model WDS only)
    • Sensor Operations
    • Wireless Sensor Specifications
• Installation—Electrical
  • Wiring
  • Electrical Wiring
  • Electric Heat Units
  • Heating Coils with Direct Expansion Cooling
• ECM Overview and Setup
  • Overview
  • General Information
    • Trane BLDC Motor
    • ECM Engine Controller
    • Standard Adapter Board
    • CSTI Adapter Board
  • Installation and Initial Setup
    • Installation and Initial Setup
    • Adjustment and Configuration of the Engine Board
    • Status Display
    • Initial Setup and Configuration
  • Configuration
    • Configuring the ECM Engine Controller
    • Configuring the ECM Engine Board
• Time Clock
  • Setting the Time Clock
• Wired Controllers—Communication Wiring
  • Wiring Installation (Tracer ZN520)
    • Device Addressing
    • Recommended Communication Wiring Practices
  • Wiring Installation (Tracer UC400)
    • Wiring Overview Outline
    • General Instructions
    • BACnet MS/TP Link
    • Power Supply
• Pre-Start
  • Pre-Start-up Checklist
• Startup
  • Tracer ZN520 Unit Startup
  • Tracer UC400 Unit Startup
  • General Information
  • Fan Mode Switch Operation
  • Tracer ZN520 Operation
  • UC400 Controller Operation
  • Tracer ZN520 Sequence of Operation
    • Cooling Operation (Tracer ZN520)
    • Fan Mode Operation (Tracer ZN520)
  • UC400 Sequence of Operation
    • Power-up Sequence (UC400)
    • Random Start (UC400)
    • Occupancy Modes (UC400)
    • Timed Override Control (UC400)
    • Zone Temperature Control (UC400)
    • Discharge Air Tempering (UC400)
    • Heating or Cooling Mode (UC400)
    • Entering Water Temperature Sampling Function (UC400)
    • Fan Operation (UC400)
    • Exhaust Control (UC400)
    • Valve Operation (UC400)
    • Modulating Outdoor/Return Air Damper (UC400)
    • Two-position Control Of A Modulating Outdoor Air Damper (UC400)
    • Electric Heat Operation (UC400)
    • Dehumidification Operation (UC400)
    • Peer-to-peer Communication (UC400)
    • Unit Protection Strategies (UC400)
• Maintenance
  • Service Access
  • Periodic Maintenance
  • Filters
  • Removal of the Drain Pan
  • Removal of the Fanboard and Coil Cleaning
  • Lubrication: Fan Shaft
  • Motor
  • Modulating Valves (3-Wire Floating)
  • Preventive Maintenance
• Diagnostics
  • Troubleshooting Checklist
  • Output Testing and Diagnostics (Tracer ZN520)
  • Output Testing and Diagnostics (UC400)
    • Output Testing (UC400)
    • Diagnostics (UC400)
  • Troubleshooting (Wireless Controls)
    • Troubleshooting (Tracer ZN520)
    • Troubleshooting (UC400)
    • Troubleshooting (ECM)
    • General Information (ECM)
    • Troubleshooting Information (ECM)
• Replacing ECM Components
  • Circuit Modules Replacement Notes/Work Instructions
  • Softsetting the IMC Address of an ECM Engine Module
• Accessories
  • Wallboxes
    • General Instructions
    • Installation in Masonry Walls
    • Installation in Curtain Walls