Trane Series R Rtud Installation And Maintenance Manual RLC SVX09H EN (10/12)

2015-04-02

• Warnings, Cautions and Notices
  • Factory Warranty Information
  • Introduction
• Model Number Description
  • Nameplates
    • Unit Nameplate
    • Compressor Nameplate
    • Model Number Coding System
    • ASME Nameplate
  • Model Number Descriptions
    • RTWD Model Number
    • Compressor Model Number
• General Information
  • Unit Description
  • Accessory/Options Information
  • General Data
• Pre-Installation
  • Inspection Checklist
  • Unit Storage
  • Installation requirements and Contractor responsibilities
• Unit Dimensions/Weights
  • Service Clearances and Dimension
  • Weights
• Installation - Mechanical
  • Location Requirements
    • Noise Considerations
    • Foundation
    • Clearances
  • Rigging
    • Lifting Procedure
    • Unit Isolation and Leveling
    • Center of Gravity
  • Evaporator Piping
    • Low Evap Refrigerant Cutout/Percent Glycol Recommendations
  • Condenser Water Piping (RTWD Units Only)
  • Refrigerant Relief Valve Venting
  • RTUD Installation
    • Application examples
    • Remote Air-Cooled Condenser Interconnection Refrigerant Piping
    • Condenser by Others Requirement for Stable fan operation at low ambient temperatures
  • System Configuration
    • Equivalent Line Length
    • Liquid Line Sizing
    • Discharge (Hot Gas) Line Sizing
    • Example
    • Refrigerant Charge Determination
    • RTUD Chilled Water Flow Control
    • Oil Charge Determination
    • Outdoor Air Temperature Sensor Installation Requirements
    • Fan Control for the Remote Air Cooled Condenser
    • RTUD Condenser Elevation Setting
  • Shipping Spacers
• Installation - Electrical
  • General Recommendations
  • Installer-Supplied Components
    • Power Supply Wiring
  • Interconnecting Wiring
    • Outdoor Air Temperature Sensor Installation Requirements
    • Remote Air Cooled Condenser
    • Fan Control for the Remote Air Cooled Condenser
  • Communications Interface
• RTWD/RTUD Operating Principles
  • General
    • RTWD
    • RTUD
  • Refrigeration (Cooling) Cycle
    • Overview
    • Cycle Description
  • Oil System Operation (RTWD/RTUD)
    • Overview
    • Compressor Motor
    • Compressor Rotors
    • Oil Filter
    • Compressor Rotor Oil Supply
    • Compressor Bearing Oil Supply
    • Oil Separator
    • Compressor Loading Sequence
• Controls Interface
  • CH530 Communications Overview
  • Controls Interface
    • DynaView
    • Display Screens
    • Main Screen
    • Chiller Operating Mode
    • Settings Screen
  • Lockout Screen
  • Power Up and Self Tests
  • TechView
    • Fan Configurations
    • A/C Fan Controls
    • Low Ambient Fan Control Type
    • Fan Deck Arrangement Circuit 1
    • Fan Deck Arrangement Circuit 2
    • Example for Fan Configurations
    • A/C Fan Controls (ACFC)
• Pre-Start Checkout
  • Unit Voltage Power Supply
    • Unit Voltage Imbalance
    • Unit Voltage Phasing
    • Water System Flow Rates
    • Water System Pressure Drop
• Unit Start-Up Procedures
  • Sequence of Operation
    • Power Up
    • Stopped to Starting:
  • Start-up
  • Seasonal Unit Start-Up Procedure
• Unit Shutdown
  • Normal Shutdown to Stopped
  • Seasonal Unit Shutdown
• Service and Maintenance
  • Overview
  • Maintenance
    • Weekly Maintenance and Checks
    • Monthly Maintenance and Checks
    • Annual Maintenance
    • Scheduling Other Maintenance
  • Operating Log
  • Service Procedures
    • Cleaning the Condense (RTWD Only)
    • RTUD Air Cooled Condenser Applications - High Condenser Pressure Limit and High Pressure Cutout Diagnostics
    • Cleaning the Evaporator
    • Compressor Oil
    • Refrigerant Charge
  • Freeze Protection
• Diagnostics
  • Starter Diagnostics
  • Main Processor Diagnostics
  • Communication Diagnostics
  • Limit Conditions
• Wiring Schematics
  • Unit Electrical Data