Trane Xr 90 Series Owners Manual ManualsLib Makes It Easy To Find Manuals Online!
2014-12-11
: Trane Trane-Xr-90-Series-Owners-Manual-121666 trane-xr-90-series-owners-manual-121666 trane pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
TUX-D-2 Upflow/Horizontal Left Downflow/Horizontal Right Condensing, Direct Vent Gas-Fired Furnace XR 90 TUX040,060,080,100,120C TDX040,060,080,100,120C Single-Stage Fan Assisted Combustion System PUB. NO. 22-1674-04-0803 (EN) General Features NATURAL GAS MODELS Central Heating furnace designs are certified by the American Gas Association for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards. SAFE OPERATION The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety. QUICK HEATING Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide a positive discharge of gas fumes to the outside. BURNERS Multiport Inshot burners will give years of quiet and efficient service. All models can be converted to L.P. gas without changing burners. INTEGRATED SYSTEM CONTROL Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service. Also contains connection points for E.A.C./humidifier. © 2003 American Standard Inc. All Rights Reserved 2 AIR DELIVERY The four speed, direct drive blower motor, has sufficient airflow for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed. STYLING Heavy gauge steel and “wrap-around” cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass. Built-in bottom pan and alternate bottom, left or right side return air connection provision. FEATURES AND GENERAL OPERATION The XR 90 High Efficiency Gas Furnaces employ a Silicon Carbide Hot Surface Ignition system, which eliminates the waste of a constant burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access. a. Low energy power venter b. Vent proving pressure switch. 22-1674-04-0803 (EN) Features and Benefits XR 90 Standard Equipment Contents General Features 2 Features and Benefits 3 • Power supply 115/1/60 • Convertible to horizontal left • Type 29-4C™ stainless steel secondary heat exchanger • Inner blower doors • Direct drive, 4-speed motors • Silicon Nitride igniter with adaptive heat up • Accessory hook-up capability – Hum and EAC • Quiet induced draft blower • Blower door safety switch • Dual solenoid combination gas valve & regulator • Cleanable high velocity filters • PVC venting – 1 or 2 pipe vent option • Left/right gas connection • Selectable cooling fan off delay eliminates need for BAY24X045 time delay relay • Single wire twinning • Integrated solid state control with selfdiagnostics • 24 volt fuse • Manual reset burner box limit • Lifetime limited primary heat exchanger or secondary heat exchanger warranty to original owner (Residential use) • 5 Year limited parts warranty • Optional extended warranties 22-1674-04-0803 (EN) XR 90 Standard Equipment XR 90 Optional Equipment General Data TUX040C924D TUX060C936D TUX080C942D TUX080C960D TUX100C948D TUX100C960D TUX120C960D TDX040C924D TDX060C936D TDX080C942D TDX100C948D TDX120C960D Performance Data 3 4 5 5 5 5 5 6 6 6 7 7 7 8 8 9 Electrical Data 11 Field Wiring 13 Twinning Field Wiring 14 Dimensions 15 3 Features and Benefits XR 90 Optional Equipment Thermostat, Mechanical Heating Only Without Fan Switch ...................................................................................... BAYSTAT388 [ Thermostat, Mechanical Heating Only With Fan Switch ........................................................................................... BAYSTAT303 [ Thermostat, Heating/Cooling Single Stage (Mounts Horizontally) ................................................................................ AY28X092 [ Thermostat, Heating/Cooling Single Stage (Mounts Vertically) ................................................................................ BAYSTAT305 [ Thermostat, Electronic Programmable 1-Stage Heating/1-Stage Cooling .............................................................. TAYSTAT300C [ Propane Conversion Kit ........................................................................................................................................ BAYLPKT210B [ Propane Conversion Kit (stainless steel burners) .................................................................................................. BAYLPSS210B [ Wall Mount Flange – 3" .............................................................................................................................................. BAY96X147 [ Wall Mount Flange – 2" .............................................................................................................................................. BAY96X148 [ Downflow Subbase ................................................................................................................................................. BAYBASE205 [ Filter Access Door Kit .............................................................................................................................................. BAYFLTR206 [ Electronic Air Filter, “Perfect Fit” Super Efficiency (17-1/2" Wide Gas Furnace) ..................................................... TFE175A9FR0 [ Electronic Air Filter, “Perfect Fit” Super Efficiency (21" Wide Gas Furnace) ........................................................... TFE210A9FR0 [ Electronic Air Filter, “Perfect Fit” Super Efficiency (24-1/2" Wide Gas Furnace) ..................................................... TFE245A9FR0 [ Electronic Air Filter, “Perfect Fit” High Efficiency (17-1/2" Wide Gas Furnace) ....................................................... TFM175A9FR0 [ Electronic Air Filter, “Perfect Fit” High Efficiency (21" Wide Gas Furnace) ............................................................. TFM210A9FR0 [ Electronic Air Filter, “Perfect Fit” High Efficiency (24-1/2" Wide Gas Furnace) ....................................................... TFM245A9FR0 [ Electronic Air Filter, “Perfect Fit” Standard Efficiency (17-1/2" Wide Gas Furnace) ................................................ TFP175A9FR0 [ Electronic Air Filter, “Perfect Fit” Standard Efficiency (21" Wide Gas Furnace) ...................................................... TFP210A9FR0 [ Electronic Air Filter, “Perfect Fit” Standard Efficiency (24-1/2" Wide Gas Furnace) ................................................ TFP245A9FR0 [ Side Filter Rack ...................................................................................................................................................... BAYFLTR200 [ Coil Enclosure (17-1/2" Wide Cabinets) ................................................................................................................ BAYCLE1700C [ Coil Enclosure (21" Wide Cabinets) ...................................................................................................................... BAYCLE2100C [ Coil Enclosure (24-1/2" Wide Cabinets) ................................................................................................................ BAYCLE2400C [ High Altitude Pressure Switch Kit TUX040,100C960D; TDX040C ........................................................................... BAYHALT230 [ High Altitude Pressure Switch Kit TUX060C ............................................................................................................ BAYHALT231 [ High Altitude Pressure Switch Kit TUX080C ............................................................................................................ BAYHALT232 [ High Altitude Pressure Switch Kit TUX100C948D,120C; TDX080,120C ................................................................. BAYHALT233 [ High Altitude Pressure Switch Kit TDX100C ............................................................................................................ BAYHALT234 [ High Altitude Pressure Switch Kit TDX060C ............................................................................................................ BAYHALT241 [ Concentric Vent Kit ............................................................................................................................................... BAYVENT100A [ Sidewall Vent Termination Kit .............................................................................................................................. BAYVENT200B [ Manufactured/Mobile Home Kit ............................................................................................................................ BAYMFGH100A [ 4 ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] 22-1674-04-0803 (EN) General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE (ICS) Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type-Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty. — Drill Size GAS VALVE PILOT SAFETY DEVICE Type BURNERS — Type Number POWER CONN. — V / Ph / Hz 4 Ampacity (In Amps) Max. Overcurrent Protection (Amps) PIPE CONN. SIZE (IN.) DIMENSIONS Crated (In.) WEIGHT Shipping (Lbs.) / Net (Lbs) TUX040C924D Upflow / Horizontal TUX060C936D Upflow / Horizontal TUX080C942D Upflow / Horizontal TUX080C960D Upflow / Horizontal 40,000 38,000 92.0 30 - 60 DIRECT 9x7 1 4 See Fan Performance Table 1/5 1075 115/1/60 Centrifugal Direct - 1 1/55 - 3000 115/1/60 1.0 Yes High Velocity 1 - 17x25 - 1in. 2 Round 60,000 56,000 92.0 30 - 60 DIRECT 10 x 7 1 4 See Fan Performance Table 1/3 1075 115/1/60 Centrifugal Direct - 1 1/55 - 3000 115/1/60 1.0 Yes High Velocity 1 - 17x25 - 1in. 2 Round 80,000 74,000 92.0 35 - 65 DIRECT 10 x 8 1 4 See Fan Performance Table 1/3 1075 115/1/60 Centrifugal Direct - 1 1/24 - 3200 115/1/60 1.35 Yes High Velocity 1 - 17x25 - 1in. 2 Round 80,000 74,000 92.0 30 - 60 DIRECT 10 x 11 1 4 See Fan Performance Table 3/4 1075 115/1/60 Centrifugal Direct - 1 1/25 - 3200 115/1/60 1.35 Yes High Velocity 1 - 20x25 - 1in. 2 Round Aluminized Steel - Type I Aluminized Steel - Type I Aluminized Steel - Type I Aluminized Steel - Type I 20 20 20 20 2 — 45 2 — 56 Redundant - Single Stage 3 — 45 3 — 56 Redundant - Single Stage 4 — 45 4 — 56 Redundant - Single Stage 4 — 45 4 — 56 Redundant - Single Stage Hot Surface Ignition Multiport Inshot 2 115/1/60 4.8 15 1/2 HxWxD 41-3/4 x 19-1/2 x 30-1/2 Hot Surface Ignition Multiport Inshot 3 115/1/60 8.4 15 1/2 HxWxD 41-3/4 x 19-1/2 x 30-1/2 Hot Surface Ignition Multiport Inshot 4 115/1/60 9.5 15 1/2 HxWxD 41-3/4 x 19-1/2 x 30-1/2 Hot Surface Ignition Multiport Inshot 4 115/1/60 13.5 20 1/2 HxWxD 41-3/4 x 23 x 30-1/2 139 / 129 150 / 140 158 / 148 171 / 160 1 Central Furnace heating designs are certified by AGA and CSA. 2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level. For Canadian applicaitons, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level. 3 Based on U.S. government standard tests. 4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. 22-1674-04-0803 (EN) 5 General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE (ICS) Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type-Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty. — Drill Size GAS VALVE PILOT SAFETY DEVICE Type BURNERS — Type Number POWER CONN. — V / Ph / Hz 4 Ampacity (In Amps) Max. Overcurrent Protection (Amps) PIPE CONN. SIZE (IN.) DIMENSIONS Crated (In.) WEIGHT Shipping (Lbs.) / Net (Lbs) TUX100C948D Upflow / Horizontal TUX100C960D Upflow / Horizontal TUX120C960D Upflow / Horizontal 100,000 93,000 92.0 35 - 65 DIRECT 10 x 10 1 4 See Fan Performance Table 1/2 1075 115/1/60 Centrifugal Direct - 1 1/20 - 3450 115/1/60 0.71 Yes High Velocity 1 - 20x25 - 1in. 2 Round 100,000 93,000 92.0 35 - 65 DIRECT 11 x 10 1 4 See Fan Performance Table 3/4 1100 115/1/60 Centrifugal Direct - 1 1/20 - 3450 115/1/60 0.71 Yes High Velocity 1 - 24x25 - 1in. 2 Round 120,000 113,000 92.0 40 - 70 DIRECT 11 x 10 1 4 See Fan Performance Table 3/4 1100 115/1/60 Centrifugal Direct - 1 1/20 - 3450 115/1/60 0.71 Yes High Velocity 1 - 24x25 - 1in. 3 Round Aluminized Steel - Type I Aluminized Steel - Type I Aluminized Steel - Type I 20 20 20 5 — 45 5 — 56 Redundant - Single Stage 5 — 45 5 — 56 Redundant - Single Stage 6 — 45 6 — 56 Redundant - Single Stage Hot Surface Ignition Multiport Inshot 5 115/1/60 12.5 15 1/2 HxWxD 41-3/4 x 23 x 30-1/2 Hot Surface Ignition Multiport Inshot 5 115/1/60 12.9 15 1/2 HxWxD 41-3/4 x 26-1/2 x 30-1/2 Hot Surface Ignition Multiport Inshot 6 115/1/60 12.9 15 1/2 HxWxD 41-3/4 x 26-1/2 x 30-1/2 171 / 160 197 / 185 205 / 193 1 Central Furnace heating designs are certified by AGA and CSA. 2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level. For Canadian applicaitons, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level. 3 Based on U.S. government standard tests. 4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. 6 22-1674-04-0803 (EN) General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE (ICS) Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type-Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty. — Drill Size GAS VALVE PILOT SAFETY DEVICE Type BURNERS — Type Number POWER CONN. — V / Ph / Hz 4 Ampacity (In Amps) Max. Overcurrent Protection (Amps) PIPE CONN. SIZE (IN.) DIMENSIONS Crated (In.) WEIGHT Shipping (Lbs.) / Net (Lbs) TDX040C924D Downflow / Horizontal TDX060C936D Downflow / Horizontal TDX080C942D Downflow / Horizontal 40,000 38,000 91.0 30 - 60 DIRECT 10 x 7 1 4 See Fan Performance Table 1/5 1080 115/1/60 Centrifugal Direct - 1 1/55 - 3000 115/1/60 1.14 Yes High Velocity 2 - 14x20 - 1in. 2 Round 60,000 56,000 91.0 30 - 60 DIRECT 10 x 8 1 4 See Fan Performance Table 1/3 1075 115/1/60 Centrifugal Direct - 1 1/55 - 3000 115/1/60 1.0 Yes High Velocity 2 - 14x20 - 1in. 2 Round 80,000 74,000 91.0 35 - 65 DIRECT 11 x 8 1 4 See Fan Performance Table 1/2 1075 115/1/60 Centrifugal Direct - 1 1/25 - 3200 115/1/60 1.35 Yes High Velocity 2 - 14x20 - 1in. 2 Round Aluminized Steel - Type I Aluminized Steel - Type I Aluminized Steel - Type I 20 20 20 2 — 45 2 — 56 Redundant - Single Stage 3 — 45 3 — 56 Redundant - Single Stage 4 — 45 4 — 56 Redundant - Single Stage Hot Surface Ignition Multiport Inshot 2 115/1/60 4.8 15 1/2 HxWxD 41-3/4 x 19-1/2 x 30-1/2 Hot Surface Ignition Multiport Inshot 3 115/1/60 9.2 15 1/2 HxWxD 41-3/4 x 19-1/2 x 30-1/2 Hot Surface Ignition Multiport Inshot 4 115/1/60 11.4 15 1/2 HxWxD 41-3/4 x 19-1/2 x 30-1/2 145 / 135 155 / 145 168 / 158 1 Central Furnace heating designs are certified by AGA and CSA. 2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level. For Canadian applicaitons, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level. 3 Based on U.S. government standard tests. 4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. 22-1674-04-0803 (EN) 7 General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE (ICS) Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type-Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty. — Drill Size GAS VALVE PILOT SAFETY DEVICE Type BURNERS — Type Number POWER CONN. — V / Ph / Hz 4 Ampacity (In Amps) Max. Overcurrent Protection (Amps) PIPE CONN. SIZE (IN.) DIMENSIONS Crated (In.) WEIGHT Shipping (Lbs.) / Net (Lbs) TDX100C948D Downflow / Horizontal TDX120C960D Downflow / Horizontal 100,000 94,000 91.0 35 - 65 DIRECT 11 x 10 1 4 See Fan Performance Table 1/2 1075 115/1/60 Centrifugal Direct - 1 1/20 - 3450 115/1/60 0.71 Yes High Velocity 2 - 16x20 - 1in. 2 Round 120,000 110,000 91.0 40 - 70 DIRECT 11 x 10 1 4 See Fan Performance Table 3/4 1075 115/1/60 Centrifugal Direct - 1 1/20 - 3450 115/1/60 0.71 Yes High Velocity 2 - 16x20 - 1in. 3 Round Aluminized Steel - Type I Aluminized Steel - Type I 20 20 5 — 45 5 — 56 Redundant - Single Stage 6 — 45 6 — 56 Redundant - Single Stage Hot Surface Ignition Multiport Inshot 5 115/1/60 13.6 20 1/2 HxWxD 41-3/4 x 23 x 30-1/2 Hot Surface Ignition Multiport Inshot 6 115/1/60 13.9 20 1/2 HxWxD 41-3/4 x 26-1/2 x 30-1/2 185 / 175 206 / 196 1 Central Furnace heating designs are certified by AGA and CSA. 2 For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level. For Canadian applicaitons, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level. 3 Based on U.S. government standard tests. 4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. 8 22-1674-04-0803 (EN) Performance Data FURNACE AIRFLOW (CFM) VS. EXTERNAL STATIC PRESSURE (in. w.c.) MODEL SPEED TAP 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 TUX040C924D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 1043 940 837 729 992 895 798 694 930 841 752 657 885 791 705 600 812 726 649 545 740 650 560 478 647 559 438 376 518 420 305 220 457 390 279 178 TUX060C936D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 1394 1250 1102 957 1359 1232 1092 944 1314 1202 1069 922 1260 1160 1034 891 1196 1106 986 853 1122 1040 925 806 1038 962 852 750 945 873 766 686 853 771 668 614 TUX080C942D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 1748 1375 1178 859 1683 1367 1167 863 1615 1347 1147 856 1544 1314 1119 839 1470 1268 1082 811 1393 1210 1036 772 1314 1139 982 723 1232 1056 919 663 1147 960 847 592 TUX080C960D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 2304 1980 1668 1375 2262 1963 1654 1372 2219 1946 1640 1368 2170 1919 1626 1361 2121 1892 1611 1354 2048 1853 1587 1330 1975 1814 1562 1305 1893 1751 1511 1267 1811 1687 1460 1229 TUX100C948D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 2054 1932 1762 1558 1980 1875 1720 1546 1906 1818 1677 1533 1826 1746 1615 1477 1746 1673 1552 1421 1649 1577 1463 1350 1551 1481 1373 1278 1428 1371 1266 1175 1305 1260 1158 1071 TUX100C960D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 2411 2108 1772 1480 2358 2083 1759 1477 2304 2058 1745 1474 2235 2007 1723 1458 2165 1956 1700 1441 2083 1893 1657 1414 2001 1829 1613 1386 1915 1754 1544 1327 1828 1679 1475 1268 TUX120C960D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 2454 2105 1747 1445 2406 2092 1742 1447 2358 2078 1736 1449 2310 2045 1720 1440 2261 2012 1703 1430 2184 1950 1677 1400 2106 1887 1651 1369 2017 1826 1593 1325 1928 1765 1535 1280 From D330656 Sh.1 Rev. 12 NOTE: See page 11 for factory heat & cool speed tap settings CFM VS. TEMPERATURE RISE MODEL TUX040C924 Cubic Feet Per Minute (CFM) 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 56 48 42 37 33 56 50 45 42 39 36 TUX080C942 61 56 51 48 44 42 TUX080C960 61 56 51 48 44 42 39 37 35 33 TUX100C948 64 60 56 52 49 46 44 42 TUX100C960 64 60 56 52 49 46 44 63 59 56 53 TUX060C936 TUX120C960 32 30 42 40 38 50 48 46 From C340405 Sh. 1 Rev. 5 22-1674-04-0803 (EN) 9 Performance Data FURNACE AIRFLOW (CFM) VS. EXTERNAL STATIC PRESSURE (in. w.c.) MODEL SPEED TAP 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 TDX040C924D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 998 856 753 647 965 832 728 617 922 797 694 581 870 751 650 538 807 695 596 490 735 628 533 435 653 550 460 375 561 462 378 308 459 363 286 235 TDX060C936D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 1487 1342 1181 877 1425 1291 1147 863 1362 1240 1113 849 1286 1182 1061 820 1209 1124 1009 791 1125 1047 943 739 1040 989 877 686 935 869 779 612 830 769 681 537 TDX080C942D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 1547 1487 1388 1263 1498 1436 1348 1234 1445 1382 1302 1196 1386 1325 1249 1150 1323 1265 1191 1095 1254 1202 1126 1032 1180 1137 1056 960 1101 1069 979 879 1016 998 896 790 TDX100C948D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 1892 1779 1630 1444 1827 1726 1587 1416 1762 1672 1544 1388 1688 1605 1485 1348 1614 1538 1426 1308 1531 1460 1362 1246 1448 1381 1297 1184 1354 1291 1208 1108 1260 1200 1119 1032 TDX120C960D 4 - HIGH - Black 3 - MED.-HIGH - Blue 2 - MED.-LOW - Yellow 1 - LOW - Red 2213 2057 1765 1468 2138 2000 1733 1452 2062 1943 1700 1435 2001 1883 1652 1409 1939 1822 1603 1382 1863 1752 1552 1336 1786 1681 1500 1290 1706 1595 1424 1225 1625 1508 1347 1159 From D330710 Rev.10 CFM VS. TEMPERATURE RISE MODEL Cubic Feet Per Minute (CFM) 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 TDX040C924D 56 TDX060C936D TDX080C942D TDX100C948D 48 42 37 34 63 56 51 46 42 39 36 34 61 56 52 48 45 42 40 37 35 65 60 56 53 50 47 44 42 40 38 37 35 67 63 59 56 53 51 48 46 44 42 TDX120C960D From C330767 Sh. 1 Rev. 3 10 22-1674-04-0803 (EN) Electrical Data From Dwg. D341852 Rev. 1 22-1674-04-0803 (EN) 11 Electrical Data From Dwg. D341854 Rev. 1 12 22-1674-04-0803 (EN) Field Wiring FIELD WIRING DIAGRAM FOR 1 STAGE FURNACE 1 STAGE HEATING USING A 1 STAGE HEATING THERMOSTAT NO COOLING FURNACE SEE NOTE 7 TWIN B/C SEE NOTE 6 TO 115 V 1 PH., 60 HZ., POWER SUPPLY PER LOCAL CODES B/C HUM SEE NOTE 5 EAC SEE NOTE 5 From Dwg. B341437 Rev. 1 FIELD WIRING DIAGRAM FOR 1 STAGE FURNACE 1 STAGE HEATING, 1 STAGE COOLING USING A 1 STAGE HEATING, 1 STAGE COOLING THERMOSTAT (OUTDOOR SECTION WITHOUT TRANSFORMER) FURNACE OUTDOOR UNIT (NO TRANSFORMER) SEE NOTE 6 B/C SEE NOTE 8 B/C TO 115 V 1 PH., 60 HZ., POWER SUPPLY PER LOCAL CODES HUM SEE NOTE 5 EAC SEE NOTE 5 22-1674-04-0803 (EN) 13 From Dwg. B340388 Rev. 2 Twinning Field Wiring TWINNING CONNECTION DIAGRAM FOR TWINNING 1 STAGE FURNACES WITH SINGLE WIRE TWINNING FEATURE 1 STAGE HEATING ONLY THERMOSTAT 1 STAGE HEAT ONLY THERMOSTAT (WITH FAN SWITCH) FURNACE NO. 2 FURNACE NO. 1 BLOWER OPERATION OF UNIT NO. 2 IS SYNCRONIZED WITH UNIT NO. 1 VIA SIGNALS FROM TWIN CONNECTION. TWIN TWIN SEE NOTE 4 ISOLATION RELAY (FIELD SUPPLIED) SEE NOTE 4 R1 R1 ISOLATION RELAY SEE NOTE 4 B/C SEE NOTE 3 B/C B/C From Dwg. 21B341422 Rev. 3 OUTDOOR UNIT (WITH TRANSFORMER) 1 STAGE HEATING / COOLING THERMOSTAT TWINNING CONNECTION DIAGRAM FOR TWINNING 1 STAGE FURNACES WITH SINGLE WIRE TWINNING FEATURE 1 STAGE HEAT / 1 STAGE COOL THERMOSTAT FURNACE NO. 2 FURNACE NO. 1 BLOWER OPERATION OF UNIT NO. 2 IS SYNCRONIZED WITH UNIT NO. 1 VIA SIGNALS FROM TWIN CONNECTION. TWIN TWIN RC ISOLATION RELAY (FIELD SUPPLIED) SEE NOTE 3 SEE NOTE 4 OUTDOOR UNIT (NO TRANSFORMER) R1 ISOLATION RELAY SEE NOTE 4 B/C SEE NOTE 5 R1 B/C B/C ISOLATION RELAY (FIELD SUPPLIED) SEE NOTE 4 14 From Dwg. 21B341423 Rev. 2 22-1674-04-0803 (EN) Dimensions TUX-C-D Outline Drawing (ALL DIMENSIONS ARE IN INCHES) MODEL A B C D E F TUX040C924 TUX060C936 TUX080C942 17-1/2" 2-1/4" 16-1/4" 16" 7-1/2" 2" TUX080C960 TUX100C948 21" 2-1/2" 19-3/4" 19-1/2" 9" 3" 10" 3" TUX100C960 TUX120C960 24-1/2" 2-15/16" 23-1/4" 23" From Dwg. 21C340574 Rev. 12 22-1674-04-0803 (EN) 15 Dimensions TDX-C-D Outline Drawing (ALL DIMENSIONS ARE IN INCHES) From Dwg. 21C341885 Rev. 0 Trane A business of American Standard Companies www.trane.com Literature Order Number TUX-D-2 File Number PL-UN-FURN-TUX-D-2 08/03 Supersedes TUX-D-1 06/02 Stocking Location PI Louisville Trane has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice. P.I.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Provided By MANUALSLIB.COM - http://www.manualslib.com/ Create Date : 2013:09:27 19:04:22Z Keywords : manuals, instruction manuals, user manuals, service manuals, user guides, pdf manuals, owners manuals, installation guides Modify Date : 2014:12:07 14:21:06+08:00 Subject : Search through 700.000 manuals online & and download pdf manuals. Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Provided By MANUALSLIB.COM - http://www.manualslib.com/ Description : Search through 700.000 manuals online & and download pdf manuals. Title : ManualsLib - Makes it easy to find manuals online! Creator Tool : pdftk 1.44 - www.pdftk.com Metadata Date : 2014:12:07 14:21:06+08:00 Producer : itext-paulo-155 (itextpdf.sf.net-lowagie.com) Document ID : uuid:64008509-d090-1e49-9621-d2dcb3f338de Instance ID : uuid:34cd9765-05e5-9f47-9098-ae98e0986818 Page Count : 16EXIF Metadata provided by EXIF.tools