Insert Memory Card. * Ensure SD Card is inserted in correct direction * Use only microSD SDHC C10 or higher level * 8G or higher capacity SD Card recommended Install Quick Release Lock Base -9- Install Handle Bar Holder 360 Rotatable Holder mount - 10 - Install Adhesive Mount Install Universal Mount - 11 - < Rear Cam > Blue LED lights up Install Handle Bar Holder - 12 - Install Adhesive Mount Install Universal Mount - 13 - Install Universal Mount & Adjusting arm - 14 - < B-GPS > Installation diagram Installation position GPS LED flashing When Positioning Successfully - 15 - Bicycle tube holder Handle Bar Extended interface Hand screw Host & Quick release base GPS Receiver Handle Bar Holder GPS Plug - 16 - Motor side mirror holder Side mirror Extended interface Hand Screw Host & Quick release base GPS Receiver Side mirror holder GPS Plug - 17 - Motor adhesive holder Flat place Extended interface Hand Screw Host & Quick release base GPS Receiver Side mirror holder GPS Plug - 18 - Motor Universal mount Extended interface Hand Screw Host & Quick release base GPS Receiver GPS Plug Universal mount - 19 - Computer program Interface Computer program name：GVPlayer Program download area： 1) Trans website download area(http://www.px.com.tw/file/B52%20video.rar) 2) https://drive.google.com/open?id=0B7GBHEgWCJt0SDR0Ty01 U2J0S1U Map Tracker Video Play Files List Files Group List Instructions： To provide the use of the GPS function recorder. When using this function, the computer must be connected to the Internet. After the map function is turned on, the information in the window will be updated with the video playback. The GPS information above provides the user with the coordinates and speed information. - 20 - - When there is GPS information in the image file, there will be a map of the image file on the trajectory. Green line represents the whole trajectory. Purple line represents the trajectory of the play. Open and close the map window interface Users can retrieve their coordinates in Google Earth, Google Map Loop play When the image file is finished Video Flip Open File Pause Play Slow Wave - 21 - Fast Wave Screenshot Stop Select the map system Select Language (English / Simplified Chinese / Traditional Chinese / German / Italian / Latvian / Polish / Romanian / Slovak / Ukrainian / French / Korean / Japanese / Spanish / Russian / Portuguese) - 22 - Product Appearance < Main Unit > A：Power / Record Power ON/OFF：Press 2 seconds Record ON/OFF：Press to start / stop B：Shutter Push for photo shot Long press 2 sec. to backup 2 files (before/current) C：WIFI On/Off or Loop Recording WIFI ON/OFF：Press 2 seconds Loop Recording ON/OFF：Push to start / stop Formatting SD card: Long press for 8 sec. Restore Factory Setting: Long press for 20 sec. - 23 - 1: Power LED Power On: Blue LED ON. Power Off: Blue LED Off 2: Charging LED Low Power: Red LED ON. Charging: Blue LED flashes. Fully Charged: Blue LED Off 3: Record LED Recording: Blue LED ON Loop Recording: Blue LED flashing Record Off: Blue LED Off 4: Alarm LED No Memory Card inserted: Blue LED ON Memory Card full: Blue LED flashing Memory Card inserted: Blue LED Off 5: WIFI LED WIFI On: Blue LED ON WIFI Connected: Blue LED flashing WIFI Disconnected: Blue LED Off - 24 - < Main Unit (IO) > Open the water proof cover to find： (1)SD Card Slot & (2) RESET KEY Rear Cam port：Connect to Rear Cam Power input: * DC5V / 1A power supply * Micro USB (Female) port 1/4” Screw Hole (connect to Sport Cam or tripod) Quick Release Speaker MIC - 25 - < Rear Cam (IO) > Connect to mounting accessories Connect Camcorder - 26 - Quick APP Installation Guide * Download “GoRiding” APP from: * Play Store for Android System * Apple Store for iOS System Step 1. Ensure Front Cam WiFi function is enabled. * If the WiFi LED indicator is not ON, means WiFi is not enabled, please push “WiFi” button to enable it. Step 2. Ensure smartphone’s WiFi has connected to Front Cam. - 27 - *Open WiFi of your Smartphone * For first WiFi connection, select device name "GoRiding" * Default Password: 1234567890 (10 digits number) Step 3. Open the APP, tap “CONNECT TO YOUR CAMERA” icon to enter setting page. 1. Tap “CONNECT TO YOUR CAMERA” icon - 28 - 2. We will lead you to Wi-Fi Setting, if you didn’t connect camera’s Wi-Fi. 3. Select the device you want to connect to and tap “Connect” to complete the connection. * A tutorial window will guide you for first connection, please follow the guide to set up. * Or you can scroll down the screen, the APP will auto connect the device. Device SSID/Password rename is required for first connection Rename device name and password  password requires 8 digits (letters or numbers)  For the security, please change the device name and password - 29 - When name/password is confirmed to change, system will initialize. APP UI Description < Main Page > Options Connected Devices List LIVE VIEW MY MEDIA VIDEO REVIEW - 30 - MOMENTS Notes： 1. Enter “CONNECT TO YOUR CAMERA”，select Device. < Options> HOME MY MEDIA MAP - 31 - < Connected Device List > - Left Windows：Select Device name (GoRiding-xxxxxx). - Rightwindows：Select Done. SETTINGS - 32 - < SETTINGS > SSID change Password change Format SD Card Firmware Version Notice: If you change SSID/Password after WiFi Settings, - 33 - It is required to redo the WiFi Settings, a tutorial window will show up to guide the WiFi Settings. < LIVE VIEW > Front Cam Preview Icons from left to right:  Remained SD Card for Videos  Power %  Close the window and return to main page Preview Icons from left to right: * Snapshot * Cam Switch * Record start/stop * SETTINGS - 34 - Enter F  R Rear Cam Preview - 35 - < SETTINGS > Resolution：1080P UpsideDown：UpsideDown / Normal Sound：With Sound / Without Sound LoopVideo：1Min / 2Min / 3Min / 5Min - 36 - < MY MEDIA > Display the recorded video file on SD card, you can choose the desired video. Smart phone video review ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Smart phone photo review Display the snapshot of photo on SD card. You can choose desired photo to show on Smartphone - 37 - < Smart phone video review> Video Review Tap to enter options ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Browse & Playback Share Notice： Browse & Playback: Play videos with smart phone’s media player Share: Share videos with smart phone’s APP. - 38 - < Smart phone photo review> Photo Review Tap to enter options ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Open & Playback Share *Notice: “Share” only supports APPs in smart phone. - 39 - < Video Review > Video Review Tap to enter options ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Open & Playback Save B62G video to smart phone Notice： Browse & Playback: Play videos with smart phone’s media player - 40 - DCIM：Recycle video file LOCK：Non-loop video file BACKUP：Backup File - 41 - < Moments > Photo Review Tap to enter options ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Browse & Playback Save B62G photo to smart phone - 42 - Trouble Shooting Q1：Bike Cam could not boot up? Ans.： (1) Press Power key for 2 sec. then release. (If still could not boot up, do the following) (2) Use mobile power supply or DC power cable as power supply for the Bike Cam, the system should boot up and charging at the same time. Make sure the Charging LED is ON or the system is turned ON. If not, do the following. (3) Please contact your original dealer or our customer service Dept. Q2：Can this Bike Cam operate without external power source? Ans.： B62G is built-in with 1100mAh lithium battery. When it is fully charged, it can continuous recording for about 1 hours. You can use the APP to check the capacity of the battery. Note: If you use the rear cam at the same time, the recording time will be reduced to 1 hour. Q3：When play the video files in PC, it will pause from time to time? Ans.： (1) Make sure your SD card is Class 10 or above. (2) Please make sure your computer meets the following requirement: CPU 2.0GHz, Memory 1GB and above. (3) Turn off all the resident programs. (4) Copy the file to your computer first before playback. (5) Use other video player program. Q4：Recorded picture is fuzzy? Ans.: Please make sure there is not fingerprints or grease on B62G’s lens. - 43 - Q5：What is the maximum capacity/speed for the memory card to be used with the B62G? How long can it records? Ans : B62G can support up to 32G for the memory card. Class10 level or above type of SD card is recommended. 1 min recording is about 120MB of SD card. Front / rear cam recording for 1min. is about 240MB. Memory Card Dual Cam Full HD (1080@30) 8GB about 30 min. 16GB about 60 min. 32GB about 120 min. Q6：Memory card is damaged and cannot be recorded? Ans.: (1) Memory card is a consumer type product. It has a cyclic R/W life mechanism. Too much read and write will make the memory card reach its limit and result with various problems in R/W. So we strongly recommend to format the memory card every 3 months. (2) If after formatting, still could not recording normally, please contact your SD card dealer or send it back for repair. (3) Memory card of Class 10 level or above is recommended. Q7: Phone / tablet cannot find the B62G, nor make connection? Ans.: (1) Please check to see if B62G’ WiFi is ON? (2) Please check to see if Smart Phone’s WiFi is ON? (3) Please make sure the B62G is selected in App’s WiFi devices list. - 44 - (4) Restart the APP, and then connect again. (5) If still failed to connect, please contact PX customer service Dept. Q8. : The recorded date/time is not correct? Ans.: Before us the B62G, connect to GoRiding APP once  System will calibrate the system time to the local time. Q9: Mobile supported system? Ans.: iOS: version 8.2 or above Android: Version 4.0.3 or above. Q10.: There is only one resolution for the photo mode? Ans.: This is because B62G use Snapshot for Photo mode, it supports only 1920x1080 resolution. Q11 : When playback video files in Android system, the video might distorted or flashback? Ans.: (1) Because the video file format is MOV(1080), some smart phone does not support 1080@30 MOV playback. (2) When this happened, please switch to 1080@30 resolution for the recording. Q12: PC system configuration for the video player program? Ans.: Windows XP/7/8/10 - 45 - Specification Main unit & Rear Cam IC Chip Dynamic Record Resolution Dynamic Record Format Dynamic Video Ratio Video Bit-Rate Static Photo Format Static Photo Ratio Image Sensor Optical Format Pixel Size Record Angle Lens Aperture Power Supply Lithium Battery Memory Card USB type Six-axis Sensor (Front cam)AIT 8328P (Reae cam)AIT 8437D Full HD 1080@30 .Mov 16:9 Average 20Mbps JPG， (Front cam)FULL HD 1920x1080 (Rear cam)HD 1280x720 16:9 (Front cam)OV 4689 (Rear cam)AR0330 (Front cam)1/3” (Rear cam)1/3” (Front cam)4.1M pixel (Rear cam)3M pixel (Front cam)FOV(D) 122° (Rear Cam)FOV(D) 178° (Front cam)F1.8 (Rear cam)F2.5 1. Built-in Lithium Battery 2. External DC 5V/1A power supply * Frequency 60Hz Yes，1100mAh Support up to 32GB（MicroSD/SDHC） USB 2.0 High Speed Built-in GYRO-Sensor - 46 - Mic Yes Speaker Yes Wi-Fi EIS Anti-shake Photo Shot Yes, 802.11 b/g/n Yes Shot Shutter APP Shutter Yes, share via smartphone Yes Cloud Share WDR Date/Time Flip Record Mode I/O Safety Water Proof Level LED Indicator Language Color Size Weight Working Temp Storage Temp. (For one year only) Yes Yes, 180° PS. APP Setup 1/2/3/5 minutes in length per record 1. Power in (micro USB) 2. EXTRA Option (micro USB)  Rear Cam BSMI、NCC、CE IPX5 Power LED / Power LED Charge LED / Alarm LED WiFi LED Traditional Chinese/English Silver Grav (Front cam)74mm * 45mm * 32mm (Rear cam)43mm * 32mm * 45mm (Front cam)85g (Rear cam)41g -20℃ ~ 55℃(Charging 45℃) -10℃ ~ 30℃ (RH 85%) - 47 - GPS ● Receiver type：GPS system ● Chip：U-blox 7020 ● Frequency：L1 1575.42MHz ● Baud rate：9600bps ● Consumption：0.5W(max) (DC 5V 10mA) ● Waterproof：Ultrasonic pressing ● Interface：USB 2.0 ● Operating temperature：-40℃ ~ 80℃ ● Size：32 x 53 x 14 (mm) with cable 100mm (SR-SR) ● Weight：26 (g) - 48 - Series Difference Differences Model Series Quick Charge B52Q WIFI GPS Rear Bike Mount Motorbike Cam FW kit Mount kit Version B52Q-V*.** B52 B52X B52-V*.** B52G B52-V*.** B52R B52-V*.** B51-V*.** B51-V*.** B51-V*.** B51-V*.** M62-V*.** M62-V*.** M61-V*.** M61-V*.** B51 B51X B51G B51R B62 B62G B61 B61G - 49 - B52-V*.** FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. — — — — Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - 50 - Declaration of Compliance Hereby we, Trans Electric Co., Ltd, declare that the radio equipment type B52Q series is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.px.com.tw Radio Frequency Power Claim item Radio Frequency Output Power WLAN 2.4GHz 802.11b 10dBm 2.4GHz 802.11g 10dBm 2.4GHz 802.11n HT20 10dBm - 51 -