Trans Electric BTR1000 Bluetooth Audio Adapter User Manual RF BTR212 A2DP AptX

Download:
Mirror Download [FCC.gov]
Document ID	2115593
Application ID	ZpvOAA+BT6TeyRtbrJpi8A==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.57kB (1044661 bits)
Date Submitted	2013-11-11 00:00:00
Date Available	2014-05-12 00:00:00
Creation Date	2013-10-11 18:37:56
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2013-10-11 18:38:11
Document Title	RF-BTR212 A2DP&AptX®
Document Creator	Acrobat PDFMaker 9.1 Word 版
Document Author:	market

BTR-1002N
Bluetooth music receiver
With A2DP/SBC supported and With NFCTM fast paring
and connection.
Feature
◎SBC codec support
◎NFC Quick link support
◎A2DP Bluetooth profile supported
◎ 33 feet(10M) effective range
◎Audio RL audio output
◎8 devices ID storable
What’s in the box
Main unit
AC/DC adaptor
3.5mm male
3.5mm female
male audio cable
audio RL cable
Outlook and connectors
Front
Top View
Back
Side View
Setup your BTR-1002N
Analogue connection
1.
Connect one 3.5mm end of the include audio to headphone jacket on the
BTR-1000
2.
Connect the other end to an audio input on your home stereo system (3.5mm or
3.5mm + 3.5mmm2 RCA). Consult your stereo user’s manual for more
information on how to accomplish this.
3.
Consult your stereo user’s manual for more information on how to accomplish
this.
4.
Connect AC power adaptor cable to DC input jacket of BTR-1000, AC end to any
AC outlet.
5.
The LED light will flash once to show the unit is powered and ready for being
paired for your devices.
NFC Fast connection and Pairing of BTR-1002N
BTR-1002N is equipped with a standard NFC tag, there are NDEF information for Bluetooth
org and NFC forum defined. Before you can use this feature, you need to check your
Smartphone or tablet with NFC function and the operational system is Android 4.1 and above.
Start the NFC function
STEP1: Check the android operational system
Tab the “setting”
Choose “about Device”
Make sure android version
Is 4.1 or above
Step 2 : Turn on the NFC function
Back to setting page
Check NFC function
Turn on NFC function
Step3: Fast Connection using NFC
TAP the Smartphone to BTR
*The message will pop up
Please choose YES
*Some device will pop up
Some will not
Pairing First
Connection, if connected
you can play music now
Step4: Disconnected you device and BTR-1002N
If you wan to disconnect, you need to tap the Smartphone to BTR-1002N again. Then the
connection between BTR-1002N and your device will off.
Pairing your BTR-1002N with non NFC Smartphone
The operational logic of the BTR-1002 is designed to connect the last
connected device. When power on the unit, it will search the last connected
device then enter the pairing mode( waiting for the connection). So when you
use BTR-1002 at the first time, you can use the pairing process as following or
you can press the “Pairing Button” on the top (LED Lamp is the switch) to
entering the “pairing process”
Pairing
button
iPad/iPhone/iPod touch
1. Go to Bluetooth manager of your iPad/iPhone/iPod touch by the following steps
a .From your iPad/iPhone/iPod
b. Inside Settings tap on
touch home page, tap “setting”
2.Turn On the Bluetooth
function
“General”
3.Your iPod/iPhone/iPad
c. Inside General tap on
“Bluetooth”
4. Enter “0000” when the player
will auto searching
asks for PIN code(some
available device. You
devices have no need to input
will see “Music
PIN). This will allow the
Receiver” then Tap on
iPad/iPhone/iPod touch to pair
with “Music Receiver”
it.
5. Your iPod/iPhone/iPad
connected to
BTR-1002N Now. And You can play music from
your iPod/iPhone/iPad.
Android Phone/Tablet（ver 4.0 as Example）
1. Go to Bluetooth manager of your smart phone by the following step
a. From your smart phone home
page, tap on “setting”
b. Inside the setting, turn on The
Bluetooth
c. Bluetooth is turned on
2. Searched Bluetooth
3. Enter “0000” when
Devices will show up,
the player asks for
please tap on “Music
PIN code（some
Receiver”
devices have no
need to input PIN）.
4. Once paired, the blue LED
light on the BTR-1002N
will flash once. The Blue
LED will keep lighted
when a connection is
established
And In your Smartphone
there is showed
“connected to media
audio”
Note:
Some devices, such as iPhone, will connect immediately after pairing so the LED
will ON. Other devices, such as notebook, may ask you if you wish to connect
and LED will go off after pairing until a connection is established.
Although the BTR-1000 can only play music from one device at a time, it is capable of
being paired to up to 8 devices. It means that you have to enter the PIN code once for
each device.
You can play the music now. Just play music on your device as you normally would and
the sound will come out from your stereo system.
Note: the effective range of BTR-1002N is 33 feet(10M). (light of sight). If you hold
and wear the Smartphone or tablet and cover the Bluetooth antenna, the
distance will be shorter.
Reconnecting your device
If you move out of range or turn off the Bluetooth feature on you iPad/iPhone/iPod
touch or Smartphone, BTR-1002N will be disconnected from your device. To reconnect,
simply open the Bluetooth manager and tap on the “Music Receiver”, then you do not
need to input PIN again, the connection will be done automatically.
Adding a new phone or tablet：
If you want to switch from one device to another, please follow these steps
1.
2.
End the existing Bluetooth connection with connected device.
The BTR-1002N can now be connected with another device such as
iPad/iPod/iPhone or Smartphone or tablet.
3.
Follow the section “Pairing the BTR-1002N” to connect a new device.
Out of range or lost signal:
When the paired phone or device away from receiver (33 feet) or there is
something blocking the Bluetooth signal. The LED light will go off, it means the
connection between device and BTR-1002N is lost. To avoid a lost connection:
1.
Move the music device back into range ( within 33 feet), and make sure there’s a
clear line of sight and there are no obstructions between BTR-1002N and device.
2.
Within 15 seconds, the connection will automatically be reestablished and LED
will turn on
3.
If the connection is lost for more than 15 seconds, you need to reconnect the
device and BTR-1002N again. Please follow the “Reconnect Your Device”
section.
Indication of LED
Indication
meaning
Description
Flash once 1 sec
Power on
Waiting for connection
per 5 secs
/Pairing
Permanent Lighted
connected
Device and main unit are connected
Troubleshooting
You can solve your problems from this section
No music out from my stereo speaker
◎ Make sure the BTR-1002N is powered.
◎ Make sure an audio cable correctly and firmly connected to
BTR-1002N
◎ Make sure the volume of the stereo is set to a comfortable listening level
◎ Make sure you are within range.
◎ Make sure the Bluetooth function is opened on your device.
◎ Make sure you are playing the music from your device.
SAFETY WARNINGS
◎ BTR-1002N requires full connection and both hands to install.
◎ Do not use BTR-1002N near water(for example, a bath tub, wash bowl, kitchen sink,
laundry tub, wet basement, swimming pool, or other areas located near water).
◎ Clean with dry cloth.
◎ Unplug the BTR-1002N before cleaning.
◎ Install BTR-1002N far away from heat sources.
◎ Use only the attached accessories.
◎ Unplug the BTR-1002N when unused for long time.
“The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.”
10
Legal notices
FCC Caution:
"Changes or modifications not expressly approved by the part responsible for compliance
could void the user's authority to operate the equipment."
FCC Statement:
"This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help."
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies
pour un environnement non contrôlé.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Keywords                        : 
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Modify Date                     : 2013:10:11 18:38:11+08:00
Create Date                     : 2013:10:11 18:37:56+08:00
Metadata Date                   : 2013:10:11 18:38:11+08:00
Format                          : application/pdf
Creator                         : market
Title                           : RF-BTR212 A2DP&AptX®
Description                     : 
Document ID                     : uuid:1d543d4c-6f91-40c1-90aa-6eaea560b24c
Instance ID                     : uuid:65101791-b475-4fcf-9aa3-b384e69f367d
Subject                         : 4
Company                         : px
Comments                        : 
Source Modified                 : D:20131011103731
Page Layout                     : OneColumn
Page Count                      : 11
Author                          : market

EXIF Metadata provided by EXIF.tools