Trans Electric DIR300 Digital Remote Control Extender User Manual 1

Trans Electric Co., Ltd. Digital Remote Control Extender 1

Contents

User Manual 1

Download: Trans Electric DIR300 Digital Remote Control Extender User Manual 1
Mirror Download [FCC.gov]Trans Electric DIR300 Digital Remote Control Extender User Manual 1
Document ID1462764
Application ID+F0nnAnhYqJwX12A112jwg==
Document DescriptionUser Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.3kB (178753 bits)
Date Submitted2011-05-11 00:00:00
Date Available2011-05-11 00:00:00
Creation Date2011-05-06 11:09:41
Producing SoftwarepdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod2011-05-10 17:10:14
Document TitleDIR300說明書(20110427_因應FCC ID修改Caution).pdf
Document CreatorpdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author: lydia

DIGITAL REMOTE CONTROL
EXTENDER
MODEL :DIR-300
OWNERS MANUAL
LOCATION OF CONTROLS
Transmitter Side
Receiver Side
DC Power
DC Power IR Probe
Transmitter and
Receiver Front
Infrared Remote
Control Antenna
Remote Control
Indicators &
IR Transmitter/Receiver
Accessory
DC 12 V
AC 120V or 230V
Adaptor x2
Infrared
Extender X 3
1,1.5,2m in length
CAUTION:
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
IMPORTANT SAFETY PRECAUTIONS
To prevent fire or shock hazard, do not submerge or
expose this product to water.
To avoid electric shock, do not open the units. The
DIR-300 contains no user serviceable parts. Doing so will
void the warranty.
Use only the power supply provided with the DIR-300
Do not overload wall outlets or extension cords.
If you are experiencing difficulty with this product, do not
attempt to service it yourself. Please call your vendor for
assistance.
Product Description
The DIR-300 Wireless Infrared Remote Control Extender
enables you to extend the range of your present Infrared
Remote Control so that you can operate VCRs, stereos, Cable
Converter, Satellite receivers, etc., virtually anywhere in the
home.
Applications
The remote operation of electronics products that utilize IR
(Infrared) remote control technology such as:
Satellite Receivers
Television
VCR's (Video Cassette Recorders)
CDs (Compact Disc)
DVD's (Digital Video Disc)
LDP's (Laser Disc Players)
Cable Converter Boxes
Audio / Hi-Fi Stereo Systems
Wireless Video Sender Systems
Any IR Remote Controlled Devices
APPLICATION DIAGRAM
1. Stereo system with remote control:
IR Signal
RF Signal
DIR-300
Receiver
Wire to Extension Speaker
Probe
Stereo
Wall
IR Remote
Control
DIR-300
Transmitter
2. DSS / Satellite Receiver with remote control:
2nd TV
DSS or Satellite
Receiver
Wall
DIR-300
Receiver
IR Remote
Control
DIR-300
Transmitter
Installation & Operation Guide
Receiver
Picture 1
Picture 2
Working with extender probe
Power
Adaptor
Antenna
(Using IR )
Make sure the IR probe is affixed toward
IR sensor receiving Window with proper position
(within 0.5M and working angles +/- 15°).
Picture 3
Working without
extender probe
Keep Vertical
Picture 4
Working without extender probe
Side View
0.3
5.7 M
6M
Working Angle not more than +/15°
Not less than 0.3M and not more than 6M
Working Angle not more than +/- 15°
Transmitter
Picture 6
Picture 5
Working Angle not
more than +/- 15°
Antenna
Power
Adaptor
Keep Vertical
Remote Control
Picture 7
Antenna
Distance Not less than 0.3M and not more than 5M
Working Angle not more than +/- 15°
Care and Maintenance
Keep the DIR-300 Remote Extender dry. If it gets wet, wipe it
dry immediately.
Use and store the DIR-300 only in normal temperature
environments. Extreme temperature can shorten the life of
electronic devices
Handle the DIR-300 gently and carefully. Dropping it can
damage the circuit board and can cause it to work
improperly.
Keep the DIR-300 away from dust and dirt, which can cause
premature wear of parts.
Wipe the DIR-300 with a damp cloth occasionally to keep it
looking new. Do not use harsh chemicals, cleaning solvents,
or strong detergents.
Specifications
Operating Voltage
.110 VAC, 60Hz/230V 50Hz
DC 12V, 250mA
Power Consumption (pair)..............................
Transmission Frequency........
.....3 Watts Max
.433.92MHz+/-1MHz
Power Gain......................................................................10dBm
Effective operating range.......................
...
....about 100M
(clear line of sight)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:05:06 11:09:41+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2011:05:10 17:10:14+08:00
Metadata Date                   : 2011:05:10 17:10:14+08:00
Format                          : application/pdf
Creator                         : lydia
Title                           : DIR300說明書(20110427_因應FCC ID修改Caution).pdf
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:25153b93-6811-4fd3-96d4-11ac1d3ac4cf
Instance ID                     : uuid:585f5c3e-bf33-415f-b61f-c40fd779c085
Page Count                      : 8
Author                          : lydia
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BY4-DIR300

Navigation menu