TransCore 3000B3 Rugged computer User Manual Binder1

TransCore Rugged computer Binder1

Contents

User manual

Download: TransCore 3000B3 Rugged computer User Manual Binder1
Mirror Download [FCC.gov]TransCore 3000B3 Rugged computer User Manual Binder1
Document ID1088703
Application ID6H+mlvH3fKjc88beeshsTA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize231.82kB (2897777 bits)
Date Submitted2009-03-31 00:00:00
Date Available2009-04-02 00:00:00
Creation Date2009-03-30 15:36:24
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2009-03-30 15:45:40
Document TitleBinder1.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: panyi

CE3000B
User Guide
Ultimate
2009/03
CMU056-A1 (a)
www.RoperMobile.com
ATTENTION DAP CUSTOMERS
Leading Rugged Mobile Computer Companies
Merge To Form “Roper Mobile Technology”
TEMPE, AZ. and QUEBEC CITY, CANADA, March 27, 2007--JLT Mobile Computers, a leading provider
of rugged, wireless mobile computers built for use in challenging environments, and DAP Technologies,
LTD, manufacturer of rugged mobile computing solutions and services, have merged to form Roper Mobile
Technology (www.ropermobile.com). Both Companies are subsidiaries of Roper Industries, Inc. (NYSE:
ROP).
JLT Mobile Computers’ rugged vehicle mount computers are used throughout the world in warehousing,
construction, mining, law enforcement and in many other remote environments. JLT Mobile Computers’
sales grew 397% percent during the four-year period since 2002 and it has garnered many national awards
for its growth record, including being named to the Inc. 500 List of Fastest Growing Privately-Held Companies
in America for the last three consecutive years.
DAP Technologies, a Canadian company, designs and manufactures and markets the DAP line of rugged
mobile computing solutions and services in more than 60 countries. DAP’s products help increase the
productivity of data collection, processing and transmission for a wide variety of applications in industries
KPENWFKPIWVKNKVKGUĹżGNFUGTXKEGGOGTIGPE[UGTXKEGURWDNKEUCHGV[VTCPURQTVCVKQPUGEWTKV[CPFNQIKUVKEU
With this merger, Roper Mobile Technology is formed and is poised to enter the rugged computing
market with a comprehensive line of rugged computers, ranging from Vehicle Mount Terminals to PDAs.
6JKUOGTIGTKUVJGĹżTUVQHOCP[UVGRU4QRGT/QDKNG6GEJPQNQI[YKNNVCMGKPGUVCDNKUJKPIKVUGNHCUCPKPPQXCVKXG
technology leader in rugged, mobile computing.
This merger will help the growth of our core technology-rugged, vehicle computers. As Roper Mobile
Technology, we are able to use our added resources to strengthen our presence in international markets.
In addition, our customers can choose from a broader line of products and can expect an even higher level
of responsive world-class service and support.
For more information contact your local Sales or Customer
Representative nearest you or visit our new Web Site at
www.RoperMobile.Com.
Table of Contents
ISO %GTVKĹżECVKQP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Product Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Product 5RGEKĹżECVKQPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Warning %CWVKQP0QVG&GĹżPKVKQP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Quick Tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Battery Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Main Batteries Very Low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Main Battery Expired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Battery Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Operation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Turning the Unit On & Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Turn Unit On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Turning the Unit Off Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Automatic Shut-Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Touch Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Touch Screen Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Activating the Screen Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Alpha Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Virtual Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Activating the Keyboard Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
PC & SDIO Card Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
SDIO Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Using PC & SDIO Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Inserting PC or SDIO Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Removing PC or SDIO Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Using the Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using the Ethernet Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Transferring Files in FTP Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
USB Client Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Vehicle %TCFNG%QPPGEVQT+FGPVKĹżECVKQP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
www.RoperMobile.com
CMU056-A1
Table of Contents
Using the Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Making your own Power Supply Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Installing Vehicle Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Monitoring the Process on a 3 Serial Port Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Serial Port Connector Pin-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Field Replaceable Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Changing the Field Replaceable Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Adaptable Endcap Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Barcode Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Laser Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Testing the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
2D Barcode Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Testing the Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Fast Fingerprint Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Testing the Fingerprint Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Advanced Battery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
To See Power Remaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Preserving Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Battery Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Background Display and Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
ActiveSync Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Partnership with Ethernet Cradle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Advanced User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Companion Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
DAP CE3000B Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Microsoft Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Storage & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Shipping the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Carrying Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Battery Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Main Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Backup Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Touch Screen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Adaptable EndCap With Laser Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Quick-Reference Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Recycling Passport. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
CMU056-A1
www.RoperMobile.com
Table of Contents
FCC Statement, Copyright Policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Microsoft End-User License Agreement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Return Merchandise Authorization for Servicing (RMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Extended Warranty on Roper Mobile Technology Manufactured Products . . . . . . . . . . . . . . . . . . . . . . .65
International Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
www.RoperMobile.com
CMU050-A1
+51%GTVKĹżECVKQP
DAP Technologies has documented and implemented a Quality Management System in accordance with ISO
+PVGTPCVKQPCN5VCPFCTF %GTVKĹżECVGPWODGT 
This International recognition has been made possible thanks to the continual efforts put forth by DAP’s
personnel.
In order to ensure continuous improvements to our products and services, we invite you to communicate your
comments to our Customer Service Department by dialing:
Canada: 1 (418) 681-7833 or 1 (800) 363-1993
United States: 1(800) 363-1993
Europe: + (800) 8899 1000
or
Sales@RoperMobile.com
www.RoperMobile.com
Return To Table of Contents
CMU056-A1
www.RoperMobile.com
Introduction
INTENDED USE
This User Guide is intended to assist in the operation of the CE3000B series and applies to the CE3240B,
running Windows CE.NET 5.0 Operating System, Release Pack K or later and manufactured after June 1st,
2007. Should any information in this Guide be incorrect, please report your comments to your local Customer
Service Representative nearest you so that this document can be made as accurate as possible.
PRODUCT DESCRIPTION
The CE3000B Series is built for use in all environments. It will survive being dropped, being subject to
vibration, being used in below freezing conditions or desert heat, making it the ideal work tool for industry type
applications within many market segments.
PRODUCT ILLUSTRATION
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
Introduction
PRODUCT SPECIFICATIONS
BASE UNIT
OPERATING SYSTEM & PROCESSOR
•
Windows CE 5.0
•
Intel XScale Bulverde - PXA270, 520 MHz
MEMORY
•
128 MB Storage Flash for Win CE & File system
(approx. 64MB available to the user)
•
128 MB SRAM (Approx. 64 MB used for OS)
•
Optional: Additional storage via PCMCIA/CF
Flash Cards and USB connected Memory devices and SD Memory Flash Cards.
Voice System
•
Integrated and environmentally sealed speaker
•
Recording and play back fully supported by
Windows CE operating system
•
Optional: Integrated and environmentally sealed
microphone and headset connector
CONNECTIVITY
POWER
DISPLAY
•
KPEJFKCIQPCN OO 38)#6(6VTCPUƀGEVKXG
color LCD with LED backlighting
•
Indoor and outdoor display
•
Scratch and shock resistant touch screen that can
DGWUGFGKVJGTYKVJ5V[NWUQTĹżPIGT
KEYBOARD
•
Highly ergonomic keyboard, 22-key keypad with 10
numeric and function keys plus 2 trigger keys
•
Programmable auto-repeat
•
Keyboard backlighting
•
Customized keyboard template
•
Ergonomic key grouping to speed up data entry
•
Tactile and programmable audible feedback
CE3240W WIRELESS EDITION
•
Internal Bluetooth Class 2
•
Internal 802.11 b/g
CE3240B ETHERNET EDITION
•
Ethernet 10BaseT, 10Mbps through the cradle
•
•
•
•
•
Rechargeable backup battery
Backup system for RAM memory if main battery is
exhausted or removed
ON/OFF switch, manual or automatic shutoff
5 Volt power for external devices
•
Rechargeable 2000mAH Lithium-Ion battery
pack (user accessible)
Battery life: Typically 2 to 4 working days
Integrated charge status and low battery
indicator
Intelligent fast charge
ADAPTABLE
END-CAPS
•
•
Smart Card Reader: Contact/Contactless
*KIJTGUQNWVKQPĹżPIGTRTKPVUGPUQT
•
•
1D/2D Barcode reader (CMOS imager)
1D Barcode scanner
PC CARD & SDIO
•
•
1 PC Card Type II (CF Card via adapter)
1 Secure Digital (SD or SDIO) slot
•
•
CF Card support via adapter
User accessible via an environmentally sealed
expansion bay
COMMUNICATION
I/O
•
Ethernet 10BaseT, 10Mbps plus USB host and •
client through cradles
•
Internal, user accessible and environmentally
sealed
Ideal for OEM Integration
BUNDLED/
AVAILABLE
SOFTWARE
•
•
•
•
Microsoft ActiveSync
•
FTP Client/Server
CE Internet Explorer and Viewers for Word® , •
ExcelÂŽ, PowerPointÂŽ & PDF files
Microsoft OutlookÂŽ
•
Microsoft Window Media PlayerÂŽ
Terminal Services Client
•
Image & Video Viewer
Voice Recorder
Handwriting recognition
DAPDUB system allowing: Backup/Restore utilities,
ENQPKPI15WRFCVGWVKNKV[CWVQOCVGFĹżNGVTCPUHGT
auto recovery system
CE Pad (Notepad)
Playback/Recording program
•
•
•
•
•
•
PERIPHERALS &
ACCESSORIES
•
Various communication and charging cradles
QHĹżEGQTXGJKENG
SIZE & HEIGHT
•
5.2 cm (2.05 in) x 7.9 cm (3.1 in) x 19.6 cm (7.7
in)
ELECTRICAL &
ENVIRONMENTAL
REQUIREMENTS
TEMPERATURE
•
Operating: -20°C (-4°F) to +50°C (+122°F)
•
Storage: -30°C (-22°F) to + 60°C (+140°F)
•
Display refresh cycle may decrease
1 lb (454 g) with battery
Immersion, Rain & Humidity:
•
Meets MIL-STD-810F method 512.3 procedure 1 &
IP65
•
Meets MIL-STD-810F method 506.3 procedure 1
(wind blown rain)
•
Humidity: 95% non-condensing
Return To Table of Contents
10
CMU056-A1
www.RoperMobile.com
Introduction
PRODUCT SPECIFICATIONS (CONTINUED)
ELECTRICAL &
ENVIRONMENTAL
REQUIREMENTS
(Continued)
Free Fall Drop Resistance (*):
Electrostatic Discharge:
•
Meets and exceeds IEC 68-2-32 method 1 (2 •
Meets EN 61000-4-2
meter drop on concrete)
•
Meets and exceeds MIL-STD-810F method
516.4 procedure IV<
%'%GTVKĹżECVKQP
Approvals
•
•
Warranty
Manufacturer’s warranty: 1 year parts & labor
FCC Class B
Optional DAPCare Warranty extension available
4QRGT/QDKNG6GEJPQNQI[TGUGTXGUVJGTKIJVVQEJCPIGURGEKĹżECVKQPUYKVJQWVPQVKEG
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION, and NOTE carry special meanings and should be carefully reviewed.
WARNING
Alerts the reader about a situation, which if not avoided, could affect the proper functioning of the unit and
result in permanent damage to the unit.
CAUTION
Alerts the reader of a potentially hazardous situation, which if not avoided, may result in minor injury to the
user or may cause damage to the equipment. This includes special care necessary for the safe and effective
use of the device and the care necessary to avoid any damage that may occur as a result of use or misuse.
Note:
This provides special information to make important instructions clearer.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
11
Symbols
Warning, pay special attention.
In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE), this symbol indicates that the product must not be disposed of as unsorted
municipal waste, but should be collected separately. Refer to your local distributor for return
and/or collection systems available in your country.
Caution must be used when this symbol is present. This symbol indicates a danger for laser
radiation.
Return To Table of Contents
12
CMU056-A1
www.RoperMobile.com
Safety Precautions
WARNING
•
•
•
•
•
•
•
Refer to this Guide when inserting or removing batteries, cables or external peripherals.
1RGTCVG CPF UVQTG [QWT  WPKV YKVJKP VJG VGORGTCVWTG NKOKVU URGEKĹżGF KP VJKU )WKFG
Do not use any pointed objects on the keyboard, door or mechanisms. Doing so may damage the unit.
Use the ‘Stylus’ which has been provided with the unit by Roper Mobile Technology, as it has been
designed with a non-abrasive material that cannot scratch or damage the touch screen.
Never expose the battery to extreme heat or dispose of by burning.
Any attempts to open the case of a CE3240B unit will void the warranty.
If you need to use a cable other than the ones provided or recommended by
Roper Mobile we recommend that you contact your Customer Service Representative nearest you.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
13
Quick Tour
FRONT VIEW
1. On/Off Key
2. Light Sensor
3. EndCap with aDAPtable Extension
4. Color Screen
5. Microphone
6. Battery Status Indicator
7. Cradle Communication Connector
8. Head-Set Adapter
10
9. Hand Strap Attachment
10. Trigger Button (both sides)
11. Function Key
12. Navigation Key
(Left, Right, Top & Bottom)
12
11
Return To Table of Contents
14
CMU056-A1
www.RoperMobile.com
Quick Tour
BACK VIEW
1. Release screws for PC & SDIO Card
Access Door
2. Stylus (Pen) holder
3. Trigger Buttons (Left & Right)
4. Speaker
5. 4GNGCUGUETGYUVQEJCPIGĹżGNFTGRNCEGCDNG
battery (2 screws left and right).
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
15
Getting Started
WARNING
7RQPTGEGKXKPI[QWT%'$WPKVKVKUUVTQPIN[TGEQOOGPFGFVJCV[QWĹżTUVEJCTIGVJGDCVVGTKGURTKQTVQWUG
These following messages are likely to appear due to the length of time the unit was stored. When the battery
TGCEJGUVJGNQYNGXGNVJGDCVVGT[UVCVWUKPFKECVQTYKNNƀCUJTGF6JG/CKP$CVVGT[ſGNFYKNNDGJKIJNKIJVGFCU
“Low” under the Battery or Status Tab. It will remain highlighted as long as the battery level is between 6% and
16%.
BATTERY WARNINGS
Main Batteries Veryy Low
Following several hours of use or storage, the main
battery will become very low and this warning will
appear when there is still some power remaining.
At 5% the battery status indicator continues to
ƀCUJ CPF C YKPFQY YKNN FKURNC[ VQ KPFKECVG VQ VJG
user that the battery is at a critical level and must
be re-charged. This warning shall be displayed
approximately every 4 minutes for as long as the
battery is below 5 %
It is strongly recommended that the batteries be
re-charged immediately to avoid loss of data.
Note: The level at which this warning is to appear
ECP DG EQPĹżIWTGF CEEQTFKPI VQ RTGHGTGPEG 4GHGT
to “Battery Power Management” for further
instructions.
Main Batteryy Expired
This warning will appear when the power is too
low.
Turn the unit off immediately and recharge the
batteries.
WARNING
Data may be lost if the unit is not re-charged
immediately.
Backup
p Batteryy Low
6JGDCEMWRDCVVGT[YKNNUCXGRTQITCOUCPFĹżNGUKP
the memory for days. The backup battery is used
when replacing the main battery or when the main
battery has expired. The backup battery will be recharged every time the main batteries are charged.
Note: The life of the backup battery will depend
on:
• The residual power of the main battery.
• The amount of memory installed in the unit.
Return To Table of Contents
16
CMU056-A1
www.RoperMobile.com
Getting Started
CHARGING THE BATTERY
1. The installation requires the Modular Charger
CSCE300-NA (North America - 110V / 120V
AC Adapter) or the CSCE300-EU (Europe
220V) or the CSCE300-UK (United Kingdom
220 V).
CSCE300-EU,
CECE300-UK
2. Insert modular charger into round connector
(a) at the back of the cradle.
3. Connect the Modular Charger to the wall
outlet.
(a)
4. Insert unit into cradle.
Note:
• The CE3240B Battery Status indicator will
turn red in the next 5 seconds indicating that
charging is now in progress. The light will turn
green when charging is complete. Charging
may take up to 3 hours.
• If the unit was turned off, it should turn back
on after a few seconds or after 2 to 3 minutes
if the main battery charge has been very low
for some time. Processing will resume exactly
where it was interrupted once re-charging
starts.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
17
Getting Started
BATTERY STATUS INDICATOR
Color
&GĹżPKVKQP
Red
Charger is connected
and charging.
Green
Battery is fully charged.
Blinking Red
Warning, low battery
Yellow
Charger detected, but the
battery charger temperature
is too high or too low to recharge. Charge will start when
temperature is adequate.
No Light
Power from the charger
is not detected.
Return To Table of Contents
18
CMU056-A1
www.RoperMobile.com
Operation Guide
TURNING THE UNIT ON & OFF
Once charging is complete, the unit will automatically turn itself off after approximately 3 minutes.
Turn Unit On
1. To turn on the CE3240B Unit, press the
ON / OFF key for 2 seconds and release.
Note: Should the unit not turn on, it could be
because the battery is too low. Refer back to
“Charging the Battery” Section for further
instructions.
Turning the Unit Off Manually
There are two ways to turn the unit off:
1. Press on the Start button located at the
bottom left corner of the screen and then
select “Suspend”
or
2. To manually turn off the CE3240B unit, press
the Function Key followed by the ON / OFF
Key.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
19
Operation Guide
TURNING THE UNIT ON & OFF (CONTINUED)
Automatic Shut-Off
If the Unit remains inactive for more than 3 minutes, it will turn off automatically in order to save battery. The
unit will also save the exact status of your application program and data before shutting down. Simply restart
the unit when ready to resume work.
Note: When turned off with fully charged batteries, the unit can be stored up to several days without recharging. Refer to ‘Storage and Maintenance’ Section for further instructions.
TOUCH SCREEN
Touch Screen Calibration
The Touch Screen may need to be calibrated upon receiving a new unit of after being stored for a long period
of time.
1. Hold your Stylus down until the Cross begins
to move.
2. Touch the center of the Cross for a few
seconds. Repeat operation as Cross moves
to another location.
Note:
Calibration may also be started by following the
steps below:
Click on:
a) Start
b) Settings
c) Control Panel
3. Select Stylus applet
4. Select Calibration tab and click on
Recalibrate.
Using
g the Touch Screen
1. To use the touch screen, simply use
the Stylus provided with the Unit.
WARNING
Apply normal pressure when using the Touch
Screen. Excessive pressure may permanently
damage the screen and hinder performance.
Return To Table of Contents
20
CMU056-A1
www.RoperMobile.com
Operation Guide
TOUCH SCREEN (CONTINUED)
Using
g the Touch Screen (Continued)
1. $[WUKPIVJG5V[NWURTQXKFGFOQXGĹżNGUQT
folders by “dragging and dropping” into the
folder of your choice.
2. To open a folder, double click with Stylus on
the desired folder.
3. To run a program, double click with Stylus on
the desired program.
4. Point to a folder (pressing Stylus on Touch
Screen) and wait a few seconds, a contextual
menu will appear.
5. To navigate, with Stylus scroll up or down the
navigation bar.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
21
Operation Guide
Activating
g the Screen Backlight
Every unit has been designed to work in low-light
environments and have been equipped with a
“Backlight” that can be activated at any time.
1. To adjust the backlight, Click on:
a) Start
b) Settings
c) Control Panel
2. Select the “Display” applet.
3. Select “Backlight” tab.
Adjust time backlight is to turn off.
4. Select the “Advanced” tab for more options
5. Check options:
a) Always Off: Will remain off at all times.
b) Always On: Will remain on at all times.
c) Auto Off: Will automatically adjust to
surrounding light, turning on and off when
required.
6. To adjust backlight manually, slide
arrow to the left or to the right.
Return To Table of Contents
22
CMU056-A1
www.RoperMobile.com
Operation Guide
USING THE KEYBOARD
Special functions
To obtain special functions, press the F key (Function Key) followed by another key. Refer to the table below
HQTURGEKĹżEHWPEVKQPUCXCKNCDNGYKVJ[QWT%'$WPKV
Note: when the F1 Key is pressed, an “F” icon will appear on the task bar and disappear once the second
key has been pressed.
Special Function
Instruction
Keyboard Backlight
ON/OFF
Press the F key followed by the TAB key
Delete Key (DEL)
Press the F Key followed by the “Backspace” key
Alternate Key (ALT)
Press the F key followed by the “SP” key
Control Key (CTRL)
Press the F key followed by the “Period” key
F1 to F9
Press the F key followed by a number from 0 to 9
Navigation arrows
Press cursor pad in desired direction (Left, right, up or down)
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
23
Operation Guide
USING THE KEYBOARD (CONTINUED)
Alpha
p Mode
Special Function
Instruction
Engage / disengage
Alpha Mode
Press the F key followed by the escape key. The ABC icon will appear /
disappear on the task bar.
Enter an Alpha Character
Press the corresponding key. Depending on the letter, you may need to
press once, twice or three times in order to obtain the desired letter.
e.g:
Engage / Disengage
Uppercase Mode
press once for “ a “
press twice for “ b “
press three times for a “ c ”
Press the F key followed by the the 0 key
Virtual Keyboard
The virtual keyboard has been included to assist in the entry of data. By clicking the Keyboard icon at the
bottom right of the Task Bar, the virtual keyboard will be displayed on the screen.
•
Select “Hide Input Panel” to hide the Virtual Keyboard.
Return To Table of Contents
24
CMU056-A1
www.RoperMobile.com
Operation Guide
USING THE KEYBOARD (CONTINUED)
Virtual Keyboard
(Continued)
1. Standard Keyboard
2. Press
to toggle between the
standard and extended language Keyboard.
3. Press the Shift Key on the virtual Keyboard to
access additional characters.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
25
Operation Guide
USING THE KEYBOARD (CONTINUED)
Transcriber
Transcriber is an award winning application that
is used for handwriting recognition. Whether the
handwriting is cursive or printed, or a combination of
both, Transcriber is able to recognize both. In addition
to recognizing letter, numbers and words, Transcriber
can also recognize special characters and most
common symbols and even various control gestures.
1. Start an application such as Pocket Word or CE
Pad.
2. Double click on the Word Icon on your Desktop
or go to:
a) My Device
b) DAP Utilities
c) CE Pad
3. Click on the input method menu Icon in the
lower right corner of the window (depending on
what you already had selected on your CE3000B
unit, one of these two icons will be visible).
4. Select Transcriber from the menu.
5. Activate or deactivate Transcriber by clicking on
Transcriber in the menu.
6. Position the cursor where you want text to
appear.
7. Using the Stylus, write directly onto the screen.
Once text is written, Transcriber will wait a few
moments for the Recognition Delay, then displays
the text in the selected location.
he lo
Return To Table of Contents
26
CMU056-A1
www.RoperMobile.com
Operation Guide
USING THE KEYBOARD (CONTINUED)
Transcriber (Continued)
Note: To know more about Transcriber as well as
possible options, click on the Help Icon located on
the Input Panel Display.
Activating
g the Keyboard
Backlight
1. Press the “F” key followed by the “Tab” key,
pressing one after the other.
Note: Keyboard backlight drains the batteries more quickly, it is recommended that
backlight be used only when necessary.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
27
Operation Guide
PC & SDIO CARD DESCRIPTION
PC Cards
PC cards are available in 3 basic formats: Type I, Type II & Type III. The type refers to the thickness of the
card; type III being the thickest. The width is the same for all cards, however the length will depend on the particular function of the card. (Memory cards are the shortest while wireless and GPS cards are much longer).
Note:6JGUVCPFCTFNGPIVJQHC2%ECTFKUOO ĹŤ 1/8 in). The maximum length a CE3000B unit can
CEEQOOQFCVGKUOO ĹŤ 1/2 in). The extended length is usually used for GPS, RF Tag Readers and
wireless cards.
Note: CF cards (Compact Flash Cards) are between the SDIO and PC Cards in terms of size and can
generally be installed in the CE3000B unit as a PC card, however, it requires the use of an Adapter.
SDIO Cards
These cards are available in a smaller format. Length will depend on the complexity of the card, e.g., a
memory card is much shorter than a wireless card.
SDIO Cards will come in 3 different lengths:
•
•
•
Short: 32 mm (standard cards such as memory cards)
Medium: 40 mm (such as Bluetooth cards)
Long: 54 mm (such as WIFI AND WLAN Cards)
Note: The CE3000B unit does not accept CardBus 32 bit PC Cards or extended PCM CIA Cards (which all
use the same technology). To ensure your unit may accept certain cards not described within this user guide,
it is recommended you refer to our Technical Support Web Site for the most current information, or contact
your Technical Support Representative nearest you.
USING PC & SDIO CARDS
One PC Card slot and one SDIO card slot are located at the top of the Endcap or the Adaptable Endcap.
Follow the instructions to insert, remove or to replace a card.
WARNING
•
To ensure no dirt particles or water enters the unit when inserting, removing or replacing PC or SDIO
cards, it is important to do so in a clean and dry area.
Some Adaptable Endcaps may make the installation of these cards more complex. You may require the
assistance of a skilled technician or assistance from customer technical support.
2%5&+1%#TFUECPTGFWEGDCVVGT[NKHGUKIPKĹżECPVN[GURGEKCNN[VJG9.#0CPF$NWGVQQVJECTFU
Most PC & SDIO cards that are not memory cards, will require the installation of a driver for proper
functioning. Refer to your technical suport team or Roper Mobile Technical Support Team for further
information.
•
•
•
Return To Table of Contents
28
CMU056-A1
www.RoperMobile.com
Operation Guide
USING PC & SDIO CARDS (CONTINUED)
Inserting
g PC or SDIO Cards
1. Turn the unit off.
2. Using a Flathead screwdriver, loosen the 2
screws located at the top of your unit on Endcap.
3. Remove the Endcap slowly and place to the
side.
Note: The screws will remain inside the Endcap.
WARNING
•
The Adaptable Endcap with GPS option has a
short communication cable between Endcap
and unit. Keep Endcap close to unit not to break
or disconnect the cable.
Note: You do not need to disconnect the GPS cable
to insert the PC or SDIO cards.
4. Slide card into the appropriate socket. (PC or
SDIO).
a) SDIO Slot
b) PC Slot
5. Turn stopper to secure cards into place.
c) SDIO Stopper
d) PC Stopper
Note: The extended Endcap also comes with two
(2) foams to secure PC or SDIO cards into place
when stoppers cannot be used.
6. Replace
position
the
door
to
its
and
tighten
original
screws.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
29
Operation Guide
USING PC & SDIO CARDS (CONTINUED)
WARNING
1. Installing PC cards is not recommended
when Adaptable Endcap is installed.
2. Insert PC or SDIO Cards in a clean
and dry environment to ensure no
dust particles or water enters the unit.
3. Ensure to insert PC or SDIO Cards
appropriately or you may damage the unit.
a) PC Cards: Insert the end with the
VYQ   TQYU QH NKVVNG JQNGU ĹżTUV CPF
manufacturer
label
facing
upwards.
b) SDIO Cards: Insert the end with the row
QH EQRRGT ĹżPIGTU ĹżTUV CPF OCPWHCEVWTGT NCDGN
facing upwards.
Removing
g PC or SDIO Cards
1. Turn the unit off.
2. Using a Flathead screwdriver, loosen the 2
screws located at the top of your unit on Endcap.
3. Remove the Endcap slowly and place to the side.
Note: The screws will remain inside the Endcap.
a) To remove the PC Card from the
unit, press the ‘release button’ located to the right of the PC Card opening.
b) To remove the SDIO Card, push gently once and card will pop up. Remove card.
4. Replace the door to its original position and
tighten screws.
Return To Table of Contents
30
CMU056-A1
www.RoperMobile.com
Operation Guide
USING THE CRADLE
Note:(QTKPUVTWEVKQPUTGICTFKPIVJGKPUVCNNCVKQPCPFEQPĹżIWTCVKQPQHVJGETCFNGUCXCKNCDNGHQT[QWT%'$
unit, refer to the Technical Guide available on the Roper Mobile Technical Support web site. Refer to ‘Advanced
User Information” for instructions on logging onto the Customer Service Web Site.
The Technical Guide will provide information on the following Cradles:
1HĹżEG%TCFNG
Cradle Code
Description
CBCE340BE
Charge & Communication: USB Host; USB Client and Ethernet
Vehicle Cradles
Cradle Code
Description
CBCE340BV
Charge and Communication: USB Host; USB Client and 3 Serial Ports
(RS232)
Using
g the Ethernet Cradle
1. 6QCEVKXCVGVJG'VJGTPGV%TCFNG[QWOWUVĹżTUV
connect a CSCE300 charger to the cradle.
2. Connect the RJ-45 network cable to the cradle.
3. Slide the unit into the cradle.
4. Connect power cable to the wall outlet.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
31
Operation Guide
USING THE CRADLE (CONTINUED)
Using
g the Ethernet Cradle (Continued)
1. Ethernet Adapter is activated and linked to the
Network. It is ready to be used by a User or
Windows Application.
2. This blinking icon indicates that a connection
is established with the network and data is
being transferred.
3. The following icons indicate that the FTP
Server is running. By default, server starts
automatically when a network connection is
established.
TRANSFERRING FILES IN FTP MODE
6JG%'$WPKVKPENWFGUCP(62%NKGPVCEEGUUYJKEJOCMGUVTCPUHGTTKPIĹżNGUGCU[CPFFQGUPQVTGSWKTG
the use of ActivSync.
1. +PUGTVVJG%'$WPKVKPVQVJG1HĹżEG%TCFNG
Note: Once unit is inserted this will automatically activate the FTP server. If the
FTP server does not activate automatically, follow the steps below.
Click on:
a) Start
b) Program
c) DAP Utilities
d) FTP Server
Return To Table of Contents
32
CMU056-A1
www.RoperMobile.com
Operation Guide
Transferring Files in FTP Mode (Continued)
3. Open Internet Explorer on your Desktop Computer then type:
FTP:// 
e.g.: FTP://192.168.2.34
4. The contents of your CE3000B unit will appear. Simply use the conventional ‘Drag and Drop / Copy /
Delete’ functions to manage its contents.
USB CLIENT CONNECTION
1. 6QCEVKXCVGVJG75$%QPPGEVKQP[QWOWUVĹżTUV
connect a CSCE300 Charger to the cradle.
2. Connect USB cable to the CE3000B Unit and to
the Host connector on your desktop computer.
3. Slide unit into the cradle.
4. Connect power cable
to
wall
outlet.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
33
Operation Guide
USB CLIENT CONNECTION (CONTINUED)
1. 6QEQPĹżIWTG75$%QPPGEVKQP%NKEM
a) Start
b) Settings
c) Control Panel
d) PC Connection
2. Select “Enable direct connections to the
desktop computer”.
3. Click “OK”
4. To activate ActiveSync, Click:
a) Start
b) Programs
c) Communication
d) PC Link
Note: Shortcut to PC Link: Press the
Function Key followed by the 1.
Return To Table of Contents
34
CMU056-A1
www.RoperMobile.com
Operation Guide
USING THE VEHICLE CRADLE
A vehicle adapter/charger is required and is
available through Roper Mobile Technology (Part
Number CS312).
CBCE340BV with Optional Mount
8GJKENG%TCFNG%QPPGEVQT+FGPVKĹżECVKQP
Back of Unit:
1.
2.
3.
4.
USB Host
USB Client
Power Supply
Fuse
Under the Unit:
5. Serial Port 1
6. Serial Port 2
7. Serial Port 3
Note: 9JGPKPUVCNNKPICPFEQPĹżIWTKPIRGTKRJGTCNU
ensure to select the proper Port (1, 2 or 3) and to
EQPPGEV VQ VJG EQPĹżIWTGF RQTV QPEG KPUVCNNCVKQP
complete.
1. Install power supply lead by inserting round
connector into the round connector at the
back of the cradle (refer back to connector
KFGPVKĹżECVKQP 
2. Turn ring clockwise to hold in place.
3. Connect other end of connector to cigarette
lighter.
Note:
• The Vehicle Cradle requires a power source of
9 to 30 Vdc.
• Ensure cigarette lighter connector is clean and
corrosion-free to provide the least electrical
resistance.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
35
Operation Guide
USING VEHICLE CRADLE (CONTINUED)
Making
g your
own Power Supply
pp y Lead
To make your own power supply lead, you may order the power connector at Roper Mobile Technology using
the following information:
•
•
Roper Mobile Technology item #: NAM036
Manufacturer’s name and item #: SwitchCraft 760K
Note:
• Be sure to insert a 3 amp time-lag fuse, or if you are using a fuse box, ensure to use a similar fuse.
• All contacts must be clean and corrosion-free to avoid electrical resistance.
• Keep the length of the Lead to a minimum.
Wiring
The Vehicle Cradle can have up to 3 serial cables connected at the same time.
The DU-C-0040 measures approximately 180 cm (70 in) and includes 2 DB-9
sockets. Its sole use if for communicating with the host computer via ActiveSync.
Note: Another type of cable may be required to link certain devices such as a GPS or external radio. The
DU-C-0040 may not be the appropriate cable for these devices and a special cable might therefore be required.
To customize your own cable, refer to the “Serial Connector Pin Layout” section for further information.
Installing
g Vehicle Mount
The vehicle cradle is compatible with the RAM-MOUNT System.
•
•
Roper Mobile Technology item #: DC813
RAM-MOUNT item number: RAM-B-101U
DU-C-0040
RAM-MOUNT offers several installation possibilities. For further information, consult their web site at
www.ram-mount.com.
The DC813 hinged support is comprised of the following parts:
1. 1 RAM-B-201 Socket Arm with Handle
2. 2 RAM-B-202 anti-vibration balls
3. 3 screws
Return To Table of Contents
36
CMU056-A1
www.RoperMobile.com
Operation Guide
USING VEHICLE CRADLE (CONTINUED)
Installing the Vehicle Mount (Continued)
1. Place one of the 2 balls underneath the cradle
and align holes with the receptacles for the
screws.
2. Tighten all 3 screws to secure balls into place.
3. Position
the
second
any
solid
area
in
ball
the
against
vehicle.
4. Secure into place by tightening 4 screws (not
provided).
WARNING
For safety reasons, it is strongly recommended that
the vehicle cradle be installed at level lower than
the driver’s and passenger’s heads.
5. Using handle, loosen the pin-head adaptor.
6. Insert each of the balls on either end of the arm.
7. Adjust cradle to desired angle and secure into
position by tightening the handle.
WARNING
Roper Mobile Technology may not be held
responsible for any injuries caused by the vehicle
cradle or handheld mobile computer in the event of
a collision. The Vehicle cradle has been designed
to withstand normal bumps and vibrations during
travel. It has not been designed to secure the
handheld in case of a collision.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
37
Operation Guide
MONITORING THE PROCESS ON A 3 SERIAL PORT CRADLE
A unique feature of the 3 Serial Port Cradle will allow you to monitor the process on the CE3000B screen.
Note: A driver is required to ensure the 3 Serial Port Cradle (CBCE340BV) works correctly. For more
KPHQTOCVKQPQPVJGKPUVCNNCVKQPCPFEQPĹżIWTCVKQPQHVJGETCFNGTGHGTVQVJG%'$6GEJPKECN)WKFGNQECVGF
on Docudap technical web site.
•
Cradle is powered and driver is installed
correctly when the task bar displays the
following icons.
•
When communication begins and data is
being transferred, additional icons will appear
to indicate communication status.
Serial Port Connector Pin-Out
Ports 1 2 & 3 on the CBCE340BV Cradle
PIN
DESCRIPTION
TYPE
CD
Carrier Detect
INPUT
RX
Receive Line
INPUT
TX
Transmit Line
OUTPUT
DTR
Data Terminal Ready
OUTPUT
GND
Ground
DSR
Data Set Ready
INPUT
RTS
Request To Send
INPUT
CTS
Clear To Send
OUTPUT
RI
Ring Indicator
Return To Table of Contents
38
CMU056-A1
www.RoperMobile.com
Operation Guide
MONITORING THE PROCESS ON A 3 SERIAL PORT CRADLE (CONTINUED)
Serial Port Connector Pin-Out
Typical Communication Cable for Peripheral (Null Cable)
Cradle Side
Peripheral Side
Female DB-9
Female-- DB-9
Typical Communication Cable for Peripheral
Depends on the Peripheral
Cradle Side
Peripheral Side
Female DB-9
Male DB-9
Depends on the Peripheral
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
39
Operation Guide
FIELD REPLACEABLE BATTERY
6JG %'$ WPKV EQOGU GSWKRRGF YKVJ C ĹżGNF
replaceable battery designed to ensure quick
charging, long battery life and to withstand shocks and
vibrations. It is strongly recommended to use batteries
that are provided by Roper Mobile Technology or one
of its distributors.
Note: Check for our label on the battery pack.
WARNING
Always turn the unit off prior to changing the battery
to ensure no data is lost.
2. Turn left screw downwards and right screw
upwards to loosen in order to remove the battery
pack. (Refer to the illustration on the right).
To Unlock
1. Turn the unit off.
To Unlock
Changing the Field Replaceable Battery
3. Remove Battery Pack by lifting it off the unit.
Return To Table of Contents
40
CMU056-A1
www.RoperMobile.com
Operation Guide
FIELD REPLACEABLE BATTERY (CONTINUED)
4. Replace with a fully charged Battery Pack.
Note: Ensure to insert battery pack correctly
or you may not be able to tighten screws.
To lock
To lock
5. Turn left screw upwards and right screw
downwards to tighten and secure Battery Pack
into place. (Refer to the illustration on the right).
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
41
Adaptable Endcap Options
Part Number
3240B-C
3240B-EEC
3240B-FC
Description
1D/2D Barcode Reader
Extended End-Cap
Fingerprint & 1D/2D Barcode Reader
3240B-FEC
Fingerprint Reader
3240B-LEC
Laser Barcode Scanner
3240B-LF
Laser Scanner & Fingerprint Reader
3240B-NEC
Standard End-Cap
3240B-SCR
Contact/Contactless SmartCard Reader
3240B-REC
RS-232 DB9 End-Cap
Return To Table of Contents
42
CMU056-A1
www.RoperMobile.com
Adaptable Endcap Options
BARCODE READERS
Right
ght
Laser Scanner
The ‘Laser Scanner’ function will depend
application used and a special software
Refer to your application’s User Guide for
instructions. Information included are
scanning instructions.
on the
driver.
further
basic
Wro
Wrong
rong
ng
Refer to the diagram to the right for right and wrong
scanning methods.
Testing
g the Scanner
1. To test the scanner, click on:
a) Start
b) Programs
c) DAP Utilities
d) CE Pad
2. To activate scanner point the top of the unit
toward the barcode label needed to be scanned.
3. Press the ‘trigger’ button located on the side
of the unit and move the unit back and forth
so the beam completely crosses the label.
Trigger Button
4. Once the label has been decoded, the unit will
sound a short ‘beep’.
Note: If you keep the ‘trigger’ button pressed for
too long, the unit will stop scanning by itself after a
few moments. The unit will sound two (2) beeps to
indicate that no barcode has been detected.
Advanced Users: Refer to the CE3000B Technical
Guide for further instructions on programming.
CAUTION
•
•
Avoid Exposure to Laser Light Beam.
Do not intentionally look into the Laser Light
Beam.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
43
Adaptable Endcap Options
BARCODE READERS (CONTINUED)
2D Barcode Reader
6JKUURGEKCNQRVKQPKUWUWCNN[KPUVCNNGFCPFEQPſIWTGFKPJQWUGCVVJGOCPWHCEVWTGTŏU
The 2D Barcode Reader is primarily controlled by the client application and a special driver. Therefore, please
refer to your application specialist or supervisor for further instructions.
Note: You may also refer to the CE3000B Technical Guide located on DocuDap for further instructions on
Testing
g the Reader
1. To test the reader, click on:
a) Start
b) Program
c) DAP Utilities
d) CE Pad
2. To activate reader, press the ‘trigger’ button.
3. Hold the unit
of 10 cm (4
steadily at a
in), from the
distance
barcode.
WARNING
Do not move the unit while scanning or scan will
not function.
Note: Unlike the laser scanner, the 2D reader does not “swipe” the barcode, but rather, it takes a photograph
which is then recognized and interpreted by the unit. The photograph can be taken from any direction.
The 2D Barcode Reader will emit a red beam allowing the user to adequately focus on the barcode needing
to be read.
1PEGVJGTGCFKPIJCUDGGPEQORNGVGFVJGFGXKEGYKNNGOKVCUQWPFCPFVJGEQPĹżTOCVKQP.'&YKNNVWTPITGGP
for a moment. The numeric code will then be displayed on the screen.
You can release the trigger an any time to cancel the scanning. Two short beeps indicate that scanning has
ended.
Return To Table of Contents
44
CMU056-A1
www.RoperMobile.com
Adaptable Endcap Options
FAST FINGERPRINT SENSOR
Testing
g the Fingerprint
g p
Sensor
1. Click on:
a) Start
b) Programs
c) Dap Utilities
d) Fingerprint
2. This
“TFM
window
will
Session is
appear
indicating
not opened yet.
3. Click send to open session.
4. Wait until this message appears in
the middle section of the window.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
45
Adaptable Encap Options
FAST FINGERPRINT SENSOR (CONTINUED)
Testing
g the Fingerprint
g p
Sensor (Continued)
5. Select 1 - OnEnroll from the drop down menu.
6. Enter New ID Number and click Send.
7. 2NCEG ĹżPIGT QP (KPIGTRTKPV 5GPUQT
CPF YCKV HQT ĹżPIGTRTKPV TGEQIPKVKQP
Return To Table of Contents
46
CMU056-A1
www.RoperMobile.com
Operation Guide
FAST FINGERPRINT SENSOR (CONTINUED)
Testing
g the Fingerprint
g p
Sensor (Continued)
1. If Fingerprint image was taken appropriately,
this screen will appear.
2. If the image was read correctly, you may now
XGTKH[FCVCDCUGHQTĹżPIGTRTKPVTGEQIPKVKQP
3. Click “OnVerify” VQXGTKH[ſPIGTRTKPVKP
Database.
4. Click “Send” and wait a few moments for a
Database search.
5. After a few moments, the ő8GTKſECVKQP
Result” will be displayed.
6. It will either indicate “Match” or “No Match”.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
47
Operation Guide
SMARTCARD READER (CONTACT & CONTACTLESS)
The CardManÂŽ 5121 is based on a 13.56 MHz contactless Smart Card Interface that is compliant with ISO
5RGEKĹżECVKQPU#$CPF6JGTGCFGTYQTMUYKVJCXCTKGV[QH/*\EQPVCEVNGUU5OCTV%CTFU
including but not limited to:
Philips: MIFAREÂŽ, DESFireÂŽ, MIFARE ProXÂŽ Smart MX, and i.code;
HID: ICLASSÂŽ
Texas Instruments: TagITÂŽ
ST Micro: x-indent, SR 176, SR 1X 4K
Infineon: My-d (in secure mode UID only)
Atmel: AT088RF020
•
•
•
•
•
•
PC/SC Driver Support
Host Interface
Ũ
USB 2.0 CCID (also supports 1.1)
Transmission speed
12 Mbps
Power Supply
Bus
Powered
Max.
U25mA
Windows CE 3.0 Support
/ CE.NET (depending on the software)
*CTFYCTG5RGEKĹżECVKQPU
Dimensions (LxBxH)
Weight
Contactless (RFID) Smart Card Interface
ISO 14443 A
Ũ
ISO 14443 B
Ũ
ISO 15693
Ũ
Compliance
MicrosoftÂŽ WHQL Certified
Ũ
USB 1.1 & 2.0
Ũ
API
Ũ
57 x 40 x 1.5 mm
20 grams
without Contact
Connector;
40 grams with
Contact Connector
Operating Temperature
10 - 55° C
(32-131° F)
Operating Humidity
10 - 90 % rH
Meantime Between
Failure (MTBF)
500,000 hours
5CHGV['PXKTQPOGPVCN5VCPFCTFU RTGEGTVKĹżGF
PC / SC Driver
Ũ
Synchronous API ( On top of PC/SC)
Ũ
CE, FCC & UL
Ũ
Note: A basic Demo Program can be provided upon request. Contact your Customer Service Representative
nearest you.
Return To Table of Contents
48
CMU056-A1
www.RoperMobile.com
Advanced Settings
ADVANCED BATTERY OPTIONS
To See Power Remaining
1. Under Windows CE 5.0, click on:
a) Start
b) Settings
c) Control Panel
d) Power
e) Battery
Preserving
g Power
It is possible to extend battery life by modifying the
power delays of the unit, screen and backlighting
settings.
1. To setup the screen and backlight delays, click
on:
a) Start
b) Settings
c) Control Panel
d) _Power
e) Power Off
Batteryy Power Management
All CE3000BB units are delivered with a calibrated
Main Battery.
1. &GſPG ő.QY .GXGNŒ CU RGT [QWT UGNGEVKQP CPF
applications used.
Note: The default settings are 16% for “Low Level”
and 5% for “Very Low”. When the battery reaches
VJG NQY NGXGN VJG DCVVGT[ UVCVWU KPFKECVQT YKNN ƀCUJ
red. A 5% the battery status indicator continues to
ƀCUJ CPF C YKPFQY YKNN FKURNC[ VQ KPFKECVG VQ VJG
user that the battery is at a critical level and must
be re-charged.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
49
Advanced Settings
BACKGROUND DISPLAY AND CONTRAST
6JG5ETGGPFKURNC[JCUDGGPEQPſIWTGFVQGPUWTGNKIJVKPIKUQRVKOK\GFKPCNNRQUUKDNGGPXKronments and conditions. However, in extreme conditions and outside the normal temperature range (-20°C to +50°C (-4°F to + 122°F)), manual readjustment might be necessary.
ACTIVESYNC COMMUNICATION
7UKPIVJG/KETQUQHV#EVKXG5[PEEQOOWPKECVKQPKVKURQUUKDNGVQVTCPUHGTĹżNGUDGVYGGPCFGUMVQREQORWVGT
and the CE3000B unit.
Note: With Microsoft Outlook 2002 or later, it is also possible to synchronize information between the desktop
computer and the CE3000B unit.
ActiveSync Setup
Note: ActiveSync Client is already installed on the unit and the “ActiveSync Host” must be setup on the
desktop computer in order to function. (Should the host not be installed on the desktop, follow the instructions
below.
1. Download the latest version of the Microsoft ActiveSync Software from one of the following sites:
a) From the Microsoft Web Site
b) From DAP Technologies Customer Support Web Site @ www.support.daptech.com
2. Once download is complete, launch the ActiveSync “Install” program. A screen will appear prompting
you to Setup Microsoft ActiveSync Program.
3. Click Next
4. A screen will appear prompting you for what folder to save the program. The default folder is
recommended.
5. Click Next
6. Once installation is completed, click “Finish”. If prompted “Create Partnership between Desktop and
CE Device, Click “Cancel”.
7. Once the installation has been successfully completed, the ActiveSync Applet will be displayed on your
desktop and an icon will be added to your Task Bar. (The Software program will also be available through
the Start Menu).
Return To Table of Contents
50
CMU056-A1
www.RoperMobile.com
Advanced Settings
PARTNERSHIP WITH ETHERNET CRADLE:
Note: The “Ethernet Partnership” is only possible with ActiveSync 3.7 or 3.8.
The Ethernet connection requires the use of a cradle model # and an Ethernet cable connected between the
cradle and your network. Refer to the “using the Cradle” section for further instructions.
An initial Ethernet connection normally requires a “Partnership” with your “Host” computer using a serial or
USB port. Roper Mobile Technology has made these following programs available to assist in the creation of
the “ Ethernet Partnership” when using the Ethernet cradle:
•
•
SetPartnerShip.exe (Already installed on the CE3000B unit)
PartnerShip Server.exe (This program must be downloaded)
Download PartnerShip Server.exe
1. Go to http://www.support.daptech.com
2. Refer to CE.NET PUBLIC DOWNLOAD
3. Copy to a folder that will be easily accessible; e.g. Desktop Folder.
%TGCVGĹżTUV'VJGTPGVRCTVPGTUJKR
1. Install the CE3000B unit into its Ethernet Cradle
and wait until the network has been detected.
Click on arrow to see more icons
if network icons are not visible.
Network connection
is established.
2. Launch PartnerShip Server.exe on the Host
computer.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
51
Advanced Settings
PARTNERSHIP WITH ETHERNET CRADLE (CONTINUED)
3. To establish PartnerShip, click on:
a) Start
b) Communication
c) Set PartnerShip
4. The Ethernet PartnerShip should be
established within a few seconds.
Note: This procedure needs only to be done
QPEGVQETGCVGVJGſTUVő2CTVPGT5JKRŒ
5. To launch ActiveSync, Click on:
a) Start
b) Program
c) Communication
d) ActivSync
Note: For subsequent connections, simply
follow step 5 to start ActiveSync.
Return To Table of Contents
52
CMU056-A1
www.RoperMobile.com
Advanced Settings
ADVANCED USER INFORMATION
To obtain the most current technical information on
[QWT%'$WPKV[QWOWUVĹżTUVTGIKUVGT[QWTWPKV
@ DocuDap Technical Web Site.
1. Click on Control Panel.
2. Click on the _System Applet.
3. From this _System Applet Window, note the
16 digit serial number.
Start your Internet Browser.
Go to:
http://www.RoperMobile.com/DocuDap
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
53
Advanced Settings
ADVANCED USER INFORMATION (CONTINUED)
1. Click on “Register a Serial Number or Access
Code”
2. Enter your CE3000B unit’s serial number noted
earlier.
3. Enter a valid Email address and your user name
and password will be forwarded to you.
4. Return to DocuDap login and enter the information
that was provided to you and click “Submit”.
5. You may now surf the Technical Web Site for
more technical and advanced user information.
Return To Table of Contents
54
CMU056-A1
www.RoperMobile.com
Companion Programs
This section lists several programs that are included with the CE3000B unit and provides a brief description
of their functions. However, Not all programs are covered.
It is not the intent of this User Guide to describe the applications included. Please refer to DAP Technical
Web Site for further instructions on DAP programs included or the Microsoft Web Site for Microsoft Programs
included.
DAP CE3000B PROGRAMS
Icon
Name
CE Pad
&GĹżPKVKQP
A Small Test Editor.
To verify color screen quality.
Color Pattern
Power Remaining
Display Power Applet.
Soft Reset
Reset the unit. The supervisor
mode is required.
Recorder
#NNQYU[QWVQRNC[DCEMYCXGĹżNGU
and recorded messages.
Change Mode
Switch between the User and
Change mode.
Fast Fingerprint Sensor
Fingerprint Demo.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
55
Companion Programs
MICROSOFT PROGRAMS
Icon
Name
&GĹżPKVKQP
Inbox
Send and receive Emails by
synchronizing
Desktop
with
CE3000B unit.
Microsoft Viewer Suite
9KNN FKURNC[ 'ZEGN ĹżNGU KOCIGU
2&(2QYGT2QKPVCPF9QTFĹżNGU
MSN Messager
Chat on MSN Messenger.
Requires an Microsoft Passport or
Exchange Email Account which is
provided by employer.
Internet Explorer
Surf the Web by synchronizing
pages with desktop computer or
by connecting to Internet.
Media Player
2NC[OWUKEQTXKFGQĹżNGU
Return To Table of Contents
56
CMU056-A1
www.RoperMobile.com
Troubleshooting Guide
Problem / Failure
Low Battery Messages on the Main Battery.
Recommended Action
1. Still some power remains but it is recommended
that you replace the battery before Data is lost.
If neither of these 2 icons appear in the Task 1. Verify Network cable is connected on the back of
Bar when using Ethernet Cradle.
the cradle.
2. Verify Network cable is not defective.
3. Ethernet on-board adapter may be deactivated or
in Power Save Mode.
The screen is blank and keyboard does not
sound the ‘beep’ when a key is pressed.
1. Verify that the unit is turned on.
2. Verify that the battery is fully charged.
The unit does not turn on.
1. Verify batteries --- batteries may need re-charging.
Once unit is placed on the charger, the unit should
turn itself on in the next few seconds and re-start
the operating system.
The PC Card does not connect.
1. Verify that the PC Card is inserted properly.
Refer back to the section “Using PC Cards”
The display contrast is very weak or background 1. Verify the display contrast settings are appropriately
very dark.
set. Use the contrast keys to adjust the settings.
(Refer to “Background Display and Contrast
Advanced Settings” for further instructions.
The unit does not turn off automatically or 1. Verify unit is properly connected to the charger.
manually.
2. 8GTKH[őUJWVQHHŒHGCVWTGKURTQRGTN[EQPſIWTGF
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
57
Storage & Maintenance
The CE3000B Unit is a reliable product requiring little maintenance. Only occasional replacement of the
battery and the carrying strap is required.
WARNING
There are no user-serviceable parts inside the CE3000B Unit. Do not try to repair the unit as this may affect
proper functioning as well as void the warranty.
STORAGE
•
•
If the unit is not going to be used for a few days or more, the unit may be kept directly on the charger.
If the unit is not going to be used for a few weeks, it is strongly recommended that the unit be fully
charged and stored in a location where the temperature will be between 20°C (68°F) to 25°C (77°F).
WARNING
•
If extended storage time is necessary, it is important to backup all data to ensure no data is lost or
corrupted.
Keeping the unit on the Charger is also possible, however, this may affect the battery life and capacity
over time. It is recommended that the unit be re-charged daily.
•
CLEANING
Use a normal soft cloth and mild soap to clean the CE3000B unit. Do not use abrasives as these cleansers
OC[FCOCIGVJGĹżPKUJCPFUETCVEJVJGVQWEJUETGGP'PUWTGVJCVCNNEQORCTVOGPVUCTGRTQRGTN[ENQUGFRTKQT
to cleaning unit.
SHIPPING THE UNIT
The CE3000B units have been designed to withstand vibrations and shocks that can occur during normal
use of the product. However, should shipping one of these units be required, it is strongly recommended
that these be packaged in the same packaging the unit was delivered in, or similar packaging to avoid any
damage to the units during transportation.
CARRYING STRAP
To clean the strap, simply use a mild soap and a normal soft cloth. If there is extensive wear on the strap, it
may be time to change it.
Return To Table of Contents
58
CMU056-A1
www.RoperMobile.com
Storage & Maintenance
BATTERY MAINTENANCE
Main Battery
The high-quality Lithium-Ion battery provided with your unit may be re-charged over 500 times according to
the battery manufacturer.
Note:+HVJGDCVVGT[ŏUFWTCVKQPFQGUPQVNCUVVJGPQTOCNVKOGHTCOGURGEKſGFKVOC[DGVKOGVQEJCPIGKV6JG
main battery should last from 12 to 24 months if used under normal working conditions.
Backup Battery
The Backup Battery will normally not need to be replaced during the expected life of the CE3000B unit.
4GEJCTIGCUURGEKĹżGFCHVGTWUG
Replacing the Battery
Note: Always turn the unit off before removing the battery. The CE3000B Unit uses an approved battery to
ensure a quicker charging time, longer battery life and resistance to shock and vibrations. To ensure that the
batteries are appropriate for use on DAP equipment, it is strongly recommended that these be purchased
directly through Roper Mobile Technology or one of its distributors. (Check for our logo on the battery). Refer
back to “Field Replaceable Battery” for further instruction on changing the battery of your CE3000B unit.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
59
Storage & Maintenance
TOUCH SCREEN MAINTENANCE
The Touch Screen requires minimal maintenance. Only appropriate care when using and cleaning the touch
is required. Use the Stylus provided with the unit when using the touch screen to ensure other pointed devices
do not damage the screen. When cleaning, ensure to use a mild detergent and soft cloth.
WARNING
&Q0QVWUGCDTCUKXGUCUVJGUGOC[FCOCIGVJGĹżPKUJCPFUETCVEJVJGVQWEJUETGGP
Replace or clean the Stylus as soon as it seems damaged or dirty.
•
•
ADAPTABLE ENDCAP WITH LASER OPTION
Note:6JGGHĹżEKGPE[QHVJG.CUGTTGCFKPIYKNNFGRGPFQPVJGSWCNKV[QHVJGRNCUVKEYKPFQY#P[UETCVEJFKTVQT
ĹżPIGTRTKPVUYKNNFGITCFGVJGTGCFKPISWCNKV[
1. Clean aDAPtable end cap using a mild detergent and soft cloth to ensure no scratches
to the window. (A plastic Lens cleaner can also be used for cleaning the window).
QUICK-REFERENCE REPLACEMENT PARTS LIST
Part Description
Part Number
Lithium-Ion Battery
DCCE300
Carrying Strap (4 per package)
DCCE301
Stylus (Pen) (5 per package)
DCCE303
Return To Table of Contents
60
CMU056-A1
www.RoperMobile.com
Recycling Passport
CE3000B UNIT
The Waste Electrical and Electronic Equipment Directive (WEEE) is a European directive established in 2003
for the collection, recycling and recovery targets for all types of electrical goods.
This European Directive imposes the responsibility for the disposal of waste electrical and electronic equipment
on the manufacturers of such equipment.
In accordance to this directive, DAP Technologies will assist you in the proper disposal of your DAP Units.
For further instructions on how to dispose of these units, please refer to our web site:
www.RoperMobile.com
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
61
CE Conformity
The CE3240B, has been tested and is in compliance with the 89/336/EEC European Directive for
Electromagnetic Compatibility.
Electromagnetic Emissions & Electromagnetic Immunity
&GĹżPKVKQP
Standards
EN55022
ENV 50204
Radiated & Conducted, Class B
4CFKCVGFGNGEVTQOCIPGVKEĹżGNFHTQOTCFKQVGNGRJQPGU
EN 61000-4-2
Electrostatic discharge
EN 61000-4-3
Radiated Immunity
EN 61000-4-5
Surge
EN 61000-4-6
Conducted Immunity
EN 61000-4-11
Voltage Variation
EN 61000-3-2
Harmonic
EN 61000-3-3
Flickers
Return To Table of Contents
62
CMU056-A1
www.RoperMobile.com
FCC Information, Copyright Policy
RADIO FREQUENCY EXPOSURE REQUIREMENTS
(only for models with Wireless WAN)
For body worn operation, this product has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no metallic component. Use of
other accessories may not ensure compliance with FCC Radio Frequency exposure
guidelines. This device shall not be co-located or operating in conjuction with any other
antenna or transmitter.
INFORMATION TO USER
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for Class B Digital
Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
For more information about RF exposure, please visit the FCC web site at www.fcc.gov
For more information about the product certification, please contact
support@daptech.com
COPYRIGHT POLICY
Any software described in this document is provided under a license agreement or non-disclosure agreement. It is
strictly prohibited by law to copy any portion of the software provided by DAP Technologies onto any media format.
DAP is a registered trademark of DAP Technologies. Microsoft, MS-DOS and Windows CE are registered
trademarks of Microsoft Corporation. PCM CIA and PC Cards are also registered trademarks of Microsoft
Corporation.
Note: A Copyright Policy is also applicable for any software provided by Microsoft on DAP Products. Please refer to
Microsoft End User License Agreement Section for further information.
CMU056-A1 (a)
63
Microsoft End-User License Agreement
You have acquired a DAP device that includes software licensed from Microsoft Corporation. The Microsoft
software included in your device, as well as associated media, printed materials, and online documentation
are all protected by Copyright Laws and International Copyright Treaties. If you do not agree with this EndUser License Agreement (“EULA”), use of this device, or use and copying of, any installed software is strictly
prohibited. We strongly recommend that you immediately contact a DAP Customer Representative for return
instructions of the unused unit.
LICENSE GRANT
•
•
•
•
The software must only be used with the device provided.
There are no warranties for the software included.
Reverse engineering is strictly prohibited.
Software transfer is allowed but with restrictions. You may permanently transfer rights under this EULA
only as part of a permanent sale or transfer of the device as long as the recipient agrees to this EULA. If
the software is an upgrade, any transfer must also include all prior versions of the software.
JAVA SUPPORT
The software may contain support for programs written in Java. Java technology is not designed, manufactured,
or intended for use or resale as online control equipment in hazardous environments requiring fail-safe
performance. These environments include nuclear facilities, aircraft navigation, communication systems, air
VTCHĹżEEQPVTQNNKHGUWRRQTVOCEJKPGUQTYGCRQPU
Return To Table of Contents
64
CMU056-A1
www.RoperMobile.com
Warranty
LIMITED WARRANTY
Roper Mobile Technology will replace or repair at its discretion, any products that prove to be defective, in
terms of material or workmanship, for a period of twelve (12) months following the purchase date of the DAP
HandHeld computers and its accessories.
This warranty does not cover damages caused by misuse, abuse, neglect, or those incurred during shipping
or storage of the DAP units. This warranty does not EQXGTCP[OQFKĹżECVKQPUQTUGTXKEKPID[CP[QPGQVJGTVJCP
a Roper Mobile Authorized Service Center.
Roper Mobile Technology shall not be held accountable for any damages caused by misuse of DAP units or
damage incurred due to the installation of any other software or hardware added to these units.
WARNING
DAP units and accessories should not be used in applications where device failure could result in physical
injury or loss of life.
The Operating System, MS-Dos, Windows CE and all other software sold or provided by Roper Mobile
Technology are provided as is, without any warranty, either expressed or implied.
In no event shall Roper Mobile Technology be liable for any direct damages, indirect damages or damages
KPEWTTGFD[VJGNQUUQHRTGUGPVQTRTQURGEVKXGRTQĹżVUCTKUKPIHTQOVJGHCKNWTGKPRGTHQTOCPEGQHVJGRTQFWEV
This warranty hereby excludes all other legal warranties related to the quality of the product or its capacities
VQHWNĹżNNURGEKĹżERWTRQUGUKPENWFKPICNNYCTTCPVKGUITCPVGFD[VJG7PKVGF0CVKQPU%QPXGPVKQPQP%QPVTCEVUHQT
the International Sale of Goods; the application of this Convention being expressly excluded.
RETURN MERCHANDISE AUTHORIZATION FOR SERVICING (RMA)
+PQTFGTVQJCXG[QWTRTQFWEVUGTXKEGF[QWOWUVĹżTUVQDVCKPC4GVWTP/CVGTKCN#WVJQTK\CVKQP4/#0WODGT
from Roper Mobile Technology. You must return your unit in its original packaging to your Value Added
Reseller (VAR), an Authorized Service Center, or directly to Roper Mobile Technology. Service under the
conditions of this warranty requires prepaid shipment from your facility to a Service Center.
The DAP unit and accessories have no user serviceable parts.
To obtain an RMA Number, you may call your service center closest to you or go directly to the online RMA
form @ www.RoperMobile.com, click on Support, RMA form.
EXTENDED WARRANTY ON ROPER MOBILE TECHNOLOGY MANUFACTURED PRODUCTS
The original purchaser may, at any time during the initial warranty period, extend the warranty with the
purchase of a Roper Mobile Technology Service Contract. Contact your local VAR or Customer Support
nearest you for further information.
Return To Table of Contents
www.RoperMobile.com
CMU056-A1
65
International Addresses
Roper Mobile Technology Worldwide
1HĹżEG.QECVKQPU
Customer Support
Technical Support Canada & International
Canada
875 Charest West Boulevard, suite 200
Quebec City, Quebec
+ 1 (418) 681-7833
Canada G1N 2C9
T: (418) 681-9394
F: (418) 681-0799
+ 1 (800) 363-1993
TechSupportCanada@RoperMobile.com
TF: (800) 363-1993
E: Sales@RoperMobile.com
Technical Support USA
+ 1 (518) 293-7824
Unites States
7450 South Priest Drive
+ 1 (800) 363-1993
Tempe, Arizona
TechSupportUSA@RoperMobile.com
United States, 85283
T: (480) 705-4200
F: (480) 705-4216
Technical Support EMEA
TF: (800) 363-1993
E: Sales@RoperMobile.com
+ (800) 8899 1000
TechSupportEMEA@RoperMobile.com
Europe
0WHĹżGNF9C[
Abingdon, OX14 1RL
England
Technical Support United Kingdom
T : + 44 (0) 1235 462130
F: + 44 (0) 1235 462131
+ 44 (0) 1235 462130
TechSupportUK@RoperMobile.com
TF: + (800) 8899 1000
E: SalesUK@RoperMobile.com
Asia
Level 15, Shinjuku Dai-Ichi Seimei Bldg.
2-7-1 Nishi-Shinjuku
Shinjuku, Tokyo 163-0715
Japan
T: + 81-3-3340-2861
F: + 81-3-3340-2920
E: SalesASIA@RoperMobile.com
Return To Table of Contents
66
CMU056-A1
www.RoperMobile.com
Canada
875 Charest Boulevard West
Suite 200
Quebec City, Quebec
Canada, G1N 2C9
T: (418) 681-9394
TF: (800) 363-1993
F: (418) 681-0799
E:Sales@RoperMobile.com
Printed in Canada
United States
7450 South Priest Drive
Tempe, Arizona
United States, 85283
T: (480) 705-4200
TF: (800) 363-1993
F: (480) 705-4216
E: Sales@RoperMobile.com
Innovations for a Rugged World
2007/08
CMU056-A1
www.RoperMobile.com

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 67
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6b46a938-1e2c-4b0f-bd97-567e54a95ee4
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2009:03:30 15:36:24-04:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:03:30 15:45:40-04:00
Metadata Date                   : 2009:03:30 15:45:40-04:00
Document ID                     : uuid:b9035cdc-5614-46b6-9e8d-38b93fc22a9b
Format                          : application/pdf
Title                           : Binder1.pdf
Creator                         : panyi
Author                          : panyi
EXIF Metadata provided by EXIF.tools
FCC ID Filing: T5M3000B3

Navigation menu