Transcend Information B003C Body Camera User Manual DrivePro Body 60 Manual EN 20180516

Transcend Information Inc. Body Camera DrivePro Body 60 Manual EN 20180516

DrivePro Body 60_Manual_EN_20180516

1SpecificationsConnect Interface USB 2.0Storage Capacity Internal MLC-based storageDimensions 95.9 mm (L) × 52.2 mm (W)× 24.88 mm (H)3.78” (L) x 2.06” (W) x 0.98” (H)Weight 167g5.89 ozBattery Li-Polymer 3120mAhPower Supply Input: AC100V-240V, 50-60Hz, 0.4A MaxOutput: DC5V 2ARecording Life Up to 10 hours*OperatingTemperature-20°C (-4°F) ~ 65°C (149°F)5°C (11°F) ~ 45°C (113°F) when charging with theadapterVideo Format H.264 (MP4: up to 1920x1080 30fps)Ingress Protection IP67Shock Resistance MIL-STD-810G 516.6-Transit Drop TestLens F/2.8, 130° wide angleResolution / FrameRate Full HD (1920 x 1080) / 30fpsCertification CE, FCC, BSMI, NCC, MICWarranty 2-Year Limited* Environmental conditions may increase or decrease specifications
Federal Communications Commission (FCC) StatementThis device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2) This device must accept any interferencereceived including interference that may cause undesired operation.This Equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.RF Exposure Information (SAR)This equipment complies with the FCC portable RF exposure limit set forth for an uncontrolledenvironment. The exposure standard for wireless devices employing a unit of measurement is knownas the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.This equipment could be installed and operated with minimum distance 0cm between the radiator &your body.* Any changes or modifications not expressly approved by the party responsible for compliance couldvoid the authority to operate equipment.* This device and its antenna must not be co-located or operating in conjunction with any otherantenna or transmitter.Transcend Information Inc (USA)1645 North Brian Street, Orange, CA 92867, U.S.ATEL: +1-714-921-2000
Recycling and Environmental ProtectionRecycling the Product (WEEE): Your product is designed and manufactured with high qualitymaterials and components, which can be recycled and reused. When you see the crossed-outwheel bin symbol attached to a product, it means that the product is covered by the EuropeanDirective 2002/96/EC:Never dispose of your product with other household waste. Please inform yourself about the localrules on the separate collection of electrical and electronic products. The correct disposal of yourold product helps prevent potential negative consequences on the environment and human health.Battery Disposal: Your product contains a built-in rechargeable battery covered by the EuropeanDirective 2006/66/EC, which cannot be disposed of with normal household waste. Please informyourself about the local rules on separate collection of batteries. The correct disposal of batterieshelps prevent potentially negative consequences on the environment and human health.For products with non-exchangeable built in batteries: The removal of (or the attempt to remove)the battery invalidates the warranty. This procedure is only to be performed at the end of theproduct’s life.CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Navigation menu