Trapeze Software Group 50T0177A On-Board Validator User Manual EP308 Specifications
Trapeze Software Group, Inc. On-Board Validator EP308 Specifications
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3257872 |
| Application ID | JnReG0HydHXqZ8W7XYdqRQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 16.68kB (208503 bits) |
| Date Submitted | 2017-01-13 00:00:00 |
| Date Available | 2017-03-19 00:00:00 |
| Creation Date | 2016-03-25 13:45:44 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2016-03-25 13:45:56 |
| Document Title | EP308 Specifications |
| Document Creator | Acrobat PDFMaker 11 for Word |
| Document Author: | Craig Kennedy |
EP308 Specifications Manual 06E00079-001A On-Board Validator Manual Version Author Approval date Approved by A. Pasker EP308 Specifications Manual | Trapeze Change DRN/DCN Number Initial Release March 25, 20166 EP308 Specifications Manual 06E00079-001A Contents Overview ............................................................................................................................. 4 References ......................................................................................................................... 4 Acronyms ............................................................................................................................ 4 Electromagnetic Specifications ........................................................................................... 5 Environmental ..................................................................................................................... 6 5.1 Temperature ................................................................................................................ 6 5.2 Shock and Vibration ..................................................................................................... 6 5.3 Electrostatic Discharge ................................................................................................ 6 5.4 MTBF ........................................................................................................................... 6 5.5 Power Input.................................................................................................................. 6 5.6 Mechanical .................................................................................................................. 6 Connectors ......................................................................................................................... 7 6.1 Power .......................................................................................................................... 7 6.1.1 Connector ............................................................................................................. 7 6.1.2 Pinout ................................................................................................................... 7 6.2 Digital Input .................................................................................................................. 7 6.2.1 Connector ............................................................................................................. 7 6.2.2 Pinout ................................................................................................................... 7 6.3 J1708 ........................................................................................................................... 7 6.3.1 Connector ............................................................................................................. 7 6.3.2 Pinout ................................................................................................................... 7 6.4 Ethernet ....................................................................................................................... 9 6.4.1 Connector ............................................................................................................. 9 6.4.1 Pinout ................................................................................................................... 9 Card Interfaces ................................................................................................................... 9 7.1 Micro-SD Card Slot ...................................................................................................... 9 7.2 SIM Card Slot .............................................................................................................. 9 7.3 SAM Card Slots ........................................................................................................... 9 Interface Specifications/Recommendations......................................................................... 9 8.1 J1708 ........................................................................................................................... 9 EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A 8.2 Digital Inputs ...............................................................................................................10 8.3 Audio ..........................................................................................................................10 8.4 GPS ............................................................................................................................10 8.5 Wi-Fi ...........................................................................................................................11 8.6 Ethernet ......................................................................................................................11 EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A 1 Overview This document is to provide the specifications and recommendations for the interconnection of the EzeFare Validator. 2 References [1] SAE J1708 Serial Data Communication Between Microcomputer Systems in Heavy-Duty Vehicle Applications Aug 2004 [2] SAE 1939-11 Physical Layer, 250K bits/s, Twisted Shielded Pair Oct 1999 [3] Telit Jupiter JF2 Datasheet [4] IEEE 802.3 3 Acronyms Acronym DC EMI FCC GPS IEEE LAN MTBF RMS USB Wi-Fi Meaning Direct Current Electromagnetic Interference Federal Communications Commission Global Positioning System Institute of Electrical and Electronic Engineers, Inc. Local Area Network Mean Time Before Failure Root mean square Universal Serial Bus Wireless network based on IEEE 802.11 EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A 4 Electromagnetic Specifications Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an output on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A 5 Environmental The EzeFare Validator is designed to meet the following specifications but is not tested to meet SAE J1455. 5.1 Temperature Operating: -20°C - + 60°C Storage: -30°C - +70°C 5.2 Shock and Vibration Swept Sinusoidal: 10 – 2000 Hz @ 2 g Survive and impact velocity of 1.75 m/s on all edges and corners 5.3 Electrostatic Discharge Packaging and Handling: Tested to +/- 4kV direct contact discharge. In-Vehicle Operation: Tested to +/- 8kV direct contact discharge. 5.4 MTBF 50K hours MTBF minimum 5.5 Power Input Operating voltage range: 8 – 36V DC Current: Nominal value 500 mA @ 12V, 250 mA @ 24V Peak value 2 A @ 12V, 1A @ 24V Overvoltage (>36V) and reverse voltage protected. 5.6 Mechanical Depth: 81 mm (3.19”) Width: 134 mm (5.28”) Length: 213 mm (8.39”) EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A 6 Connectors 6.1 Power 6.1.1 Connector Connector: Molex 0306-2044 Mating Connector: Molex 0306-1043 or equivalent 6.1.2 Pinout Pin Signal Number VIN GND IGN_SENSE RFU Signal Type Vehicle Battery + Chassis Ground Vehicle Ignition Sense Reserved For Future Use 6.2 Digital Input 6.2.1 Connector Connector: Unterminated 6.2.2 Pinout Pin Signal Number INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Signal Type Discrete Input Discrete Input Discrete Input Discrete Input Discrete Input 6.3 J1708 6.3.1 Connector Connector: Molex 0306-2032 Mating Connector: Molex 0306-1038 or equivalent 6.3.2 Pinout Pin Signal Number J1708A EP308 Specifications Manual | Trapeze Signal Type J1708A(-) March 25, 20166 EP308 Specifications Manual 06E00079-001A Pin Number Signal Signal Type N/C J1708B N/A J1708B(+) EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A 6.4 Ethernet 6.4.1 Connector Connector: D-SUB 50 Male Mating Connector: D-SUB 50 Female, AMP 1658641-3 or equivalent 6.4.1 Pinout Pin Signal Number TPI+ TPI3 TPO4 TPO+ SHIELD Signal Type Data In+ Data InData OutData Out+ Ground 7 Card Interfaces 7.1 Micro-SD Card Slot One MicroSD card slot for removable memory storage. 7.2 SIM Card Slot One Mini-SIM (2FF) card slot. 7.3 SAM Card Slots Two Secure Access Module card (2FF) slots. 8 Interface Specifications/Recommendations 8.1 J1708 J1708 is a modified version of RS-485. J1708 specifies 18 gauge wire with 1 twist per inch with a total network length of 131 feet (40m) maximum. The minimum/maximum voltages on the bus are specified to be -7V – +12V. The data rate is 9600 baud. The standard node in the J1708 standard is shown in Figure 8-1. Vdiff is defined as A – B. If A – B ≥ 200 mV then the data bit is a 1, -200 mv ≤ A – B ≤ 200 mV is undefined, A – B ≤ -200mV the data bit is a 0. EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A Figure 8-1 Note: C1 and C2 are 0.0022 F. Caution: An RS-485 specified termination uses a 100 ohm resistors external to each node at each end of the bus which if installed in a J1708 system can cause the network to fail/ 8.2 Digital Inputs V IL < 0.5V and V IH 1.2V. These inputs are protected with 47K of series resistance. Transients to 60V can be tolerated with circuit damage becoming more likely above 60V. 8.3 Audio The speaker is rated to 3W, 200 – 20,000 Hz. 8.4 GPS The On-Board Validator uses an internal GPS antenna. Specifications taken from Telit Jupiter JF2 Datasheet [3]. Channels Sensitivity 10 48 To -163 dBm EP308 Specifications Manual | Trapeze March 25, 20166 EP308 Specifications Manual 06E00079-001A Heading Velocity Accuracy Acquisition Rate Protocol 0.01 deg 0.01 m/s 2.5 m Cold start: 35s, average Hot start: 1s, average NMEA and OSP 8.5 Wi-Fi The EzeFare Validator uses an internal Wi-Fi module and antenna. This supports 802.11 b/g/n and WPA2 encryption. 8.6 Ethernet There is one 10/100 BASET port. Full details of the physical layer are found in the IEEE 802.3 Specification [4]. 11 EP308 Specifications Manual | Trapeze March 25, 20166
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Craig Kennedy Create Date : 2016:03:25 13:45:44-05:00 DRN : XXXX Modify Date : 2016:03:25 13:45:56-05:00 Subject : Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:03:25 13:45:56-05:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:8acc2407-ae32-4ae0-90dc-cd15da25b217 Instance ID : uuid:6f30c425-e14d-4e9a-9eaf-1867c1f7a0b1 Format : application/pdf Title : EP308 Specifications Description : Creator : Craig Kennedy Producer : Adobe PDF Library 11.0 Keywords : Source Modified : D:20160311133115 Company : Trapeze Comments : DRN Revision : 1 Part Number : 06E0007 Dash Number : -001 Revision : A Drn : XXXX DRN Status : Initial Release Page Layout : OneColumn Page Count : 11EXIF Metadata provided by EXIF.tools