Traxxas LP TRX1018 Traxxas Link wireless module User Manual 1
Traxxas LP Traxxas Link wireless module Users Manual 1
Contents
Users Manual-1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2975360 |
| Application ID | NoKB17dp0hElm5wmhegN3w== |
| Document Description | Users Manual-1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 225.92kB (2824017 bits) |
| Date Submitted | 2016-04-29 00:00:00 |
| Date Available | 2016-04-29 00:00:00 |
| Creation Date | 2016-04-15 16:07:51 |
| Producing Software | iText 2.1.7 by 1T3XT |
| Document Lastmod | 2016-04-15 16:07:51 |
| Document Title | Users Manual-1 |
| Document Creator | pdfsam-console (Ver. 2.4.1e) |
MODEL 7908 MODEL 7909 OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL USUARIO BEDIENUNGSANLEITUNG KC2363-R05 160324 CONTENTS INTRODUCTION......................................................................................................... 2 INCLUDED SUPPORT EQUIPMENT............................................................................ 2 MODEL ORIENTATION................................................................................................ 2 KNOW BEFORE YOU FLY............................................................................................ 3 FLIGHT CONTROLS.................................................................................................... 4 SAFETY PRECAUTIONS.............................................................................................. 5 PREPARING FOR FLIGHT.......................................................................................... 6 FLYING YOUR MODEL................................................................................................ 7 AUTO TAKE-OFF......................................................................................................... 7 RETURN TO HOME..................................................................................................... 7 FLIGHT MODES........................................................................................................ 10 FILM MODE....................................................................................................... 10 SPORT MODE................................................................................................... 11 EXPERT MODE.................................................................................................. 12 CARING FOR YOUR HELICOPTER........................................................................... 12 ROTOR BLADE INSTALLATION................................................................................ 12 TROUBLESHOOTING GUIDE.................................................................................... 13 All instructions and precautions outlined in this manual should be strictly followed to ensure safe operation of your model. Failure to comply with the warnings, instructions, and precautions in this manual could lead to product damage and personal injury. INTRODUCTION Thank you for purchasing the Traxxas Āton quad rotor high performance helicopter. This manual contains the instructions you will need to operate and maintain your model. Even if you are an experienced R/C enthusiast, it’s important to read and follow the procedures in this manual so that you are fully knowledgeable on the operation and care of your Āton. We want you to feel confident that you own one of the best-performing models in the market and that it is backed by a team of professionals who aim to provide the highest level of factory support possible. Our Customer Support team is with you every step of the way. If you have any questions about your model or its operation, call the Traxxas Technical Support Line toll-free at: 1-888-TRAXXAS (1-888-8729927) (Toll-free support is available to U.S. residents only). MODEL ORIENTATION REAR Black Rotor Blades White Lights QUICK START GUIDE See the included Quick Start Guide for initial setup of your helicopter. The Quick Start Guide is not intended to replace the full operating instructions available in this manual. Please read this entire manual to become familiar with the controls and operations of the model before attempting to fly it the first time. FRONT Color Rotor Blades Red Lights INCLUDED SUPPORT EQUIPMENT • • • • • • • • • High capacity LiPo iD battery LiPo battery charger with AC power cord 4 Traxxas AAA alkaline batteries Landing gear with hardware Camera mounting bracket with hardware (designed for use with GoPro® action cameras*) 2mm hex wrench (to assist with repairs) Spare rotor blade set Spare hardware Transmitter sticks (interchangeable with the thumb pads) AAA Batteries Landing Gear and Camera Mount LiPo Battery LiPo Charger Hex Wrench, Spare Parts, and Accessories *Camera not included 2 • TRAXXAS GoPro is a registered trademark of GoPro, Inc. *Compatible with GoPro® Hero3, Hero3+, or Hero4 KNOW BEFORE YOU FLY Welcome to the world of fun and excitement with model aviation. The Āton is designed for the purpose of easily capturing beautiful and exciting imagery or to explore the freedom of flight just for the fun of it. The included Quick Start Guide contains an overview of the operation of the Āton and the steps you need to take to get flying quickly. We recommend that you review both the Quick Start Guide and this full Owner’s Manual so that you are fully knowledgeable on the operation and care of your Āton. This will help you maintain and enjoy the model for years to come. Traxxas support is always available to answer your questions and help you with any issues you may encounter. Our contact information is on the previous page. The Āton is a high performance model that has tremendous power and capability. With that comes the responsibility to read, understand, and follow all warnings, precautions, and instructions to ensure the safe operation of the model. Failure to operate the model in a safe and responsible manner may result in property damage and serious injury to yourself and others. As the pilot, you alone are responsible for ensuring that all instructions and precautions are adhered to. Your Important Responsibility as a Pilot The Āton must operate in shared air space with other model aircraft and more importantly, full-sized aircraft. It is critically important to choose a flying/filming location that meets the rules and regulations that have been established by local and national regulating bodies so that you will not create a hazard for any other aircraft in flight or person on the ground. Where Can I Fly: Choose a location that offers plenty of open space, away from people. Your Āton is controlled by radio which is subject to interference from sources beyond your control. Fly in locations that minimize any possible risk to people or property if you somehow lose control of your model. 1. Some areas such as parks or schools may be restricted for operation of radio control models. Look for posted signs or check with local authorities. 2. Look for natural or man-made obstacles that can interfere with your flight or block your line of site to the model. Examples include: • Tree lines • Power lines • Buildings • Light poles • Water towers 3. You must be able to maintain line of sight to your model at all times during flight. Places You Should Not Fly: The Federal Aviation Administration (FAA) governs the use of US airspace. The FAA classifies the Āton as an unmanned aircraft system (UAS) and RC model pilots are expected to comply with FAA regulations and restrictions for UASs. • Do Not Fly over roads or highways where your model could disrupt or distract passing traffic. • Do Not Fly within a 5-mile radius of an airport without first contacting the tower or airport authorities. • Do Not Interfere with manned aircraft operations, and you must see and avoid other aircraft and obstacles at all times. If you are able to fly near manned aircraft then it is likely you are flying in a restricted area. Land immediately and find another location. • Do Not Fly in areas with temporary flight restrictions. Examples of temporary flight restrictions include but are not limited to: • Sports stadiums and other similar venues • Racetracks • Disaster and hazard areas (such as fires or traffic accidents) • Large public gatherings • Consult with local airport officials to determine if there are flight restrictions where you intend to fly. • Do Not Fly near or over sensitive infrastructure or property such as power stations, water treatment facilities, correctional facilities, heavily 400 feet traveled roadways, government facilities, etc. (122 • Limit your altitude to 400 feet (122 meters) meters) maximum. • Check and Follow all local laws and ordinances before flying or filming over private property. Safety for Everyone • Do Not Fly while impaired by any substance or physical ailment. • Do Not intentionally fly over unprotected persons or moving vehicles, and remain at least 25 feet (7.5 meters) away from individuals and vulnerable property. • Do Not Fly in adverse weather conditions such as in high winds or reduced visibility. • Keep your model in sight at all times. • Do Not conduct surveillance or photograph persons in areas where there is an expectation of privacy without the individual’s permission. • Maintain your model to prevent mechanical problems. • Do Not Attempt to rescue your model in dangerous areas or conditions. If the model does get tangled in trees, power lines, or lands on rooftops, in water, and so on, do not risk personal injury or death to yourself or others attempting to retrieve the model. • Know How to disarm your model. If a bystander approaches the model while in operation, land and disarm immediately to prevent injury. Spinning props are dangerous. Keep spectators and bystanders well clear of the model while in operation. Who is Know Before You Fly? Know Before You Fly is an education campaign founded by the Association for Unmanned Vehicle Systems International (AUVSI), the Academy of Model Aeronautics (AMA), and the Small UAV Coalition in partnership with the Federal Aviation Administration (FAA) to educate prospective users about the safe and responsible operation of unmanned aircraft systems (UAS). At the Know Before You Fly website you will find additional information and useful links to learn even more about safe flying. For more information visit www.knowbeforeyoufly.org No Commercial Use The Āton is intended for personal recreational use. At the time this publication was created, the FAA requires anyone using an unmanned aircraft system for non-hobby purposes to acquire authorization from the FAA. Non-hobby purposes include but are not limited to commercial activities such as for-hire film and photography services, real estate and wedding photography, commercial film and television production, and for-hire inspection and survey services. For more information on what types of activities constitute non-hobby use and how to obtain authorizations and exemptions, visit www.faa.gov/uas. For operation outside of the US, be sure to consult regulations specific to your country and/or local region.. TRAXXAS • 3 Pre-Flight Checklist Read all manufacturer supplied instructions and precautions before attempting to operate the model. Make sure that you as a pilot are competent and proficient in the operation of your model. It is important to become familiar with the controls and operations of the model before attempting to operate it the first time. Make sure that your batteries are charged and the model is fully operational. Do not operate a damaged or malfunctioning model. Make sure you have a GPS satellite signal. Make sure the operating environment is safe. Controls (Mode 2 Operation) Status Bar • Altitude Up • Rotate Left • Forward • Rotate Right • Altitude Hold • Altitude Down GPS Home • Backward Throttle Stick Up HOLD Hold AUX1 Button Air Brake Button (AUX2) Default Setting: Initiate Trick Sequence (Sport (Fast) Mode only; see Owner’s Manual for details) Press and release to enter transmitter menu while disarmed Rotate Left Power • Sideways Right • Sideways Left Rotate Right Flight Stick Press and release to change Flight Mode while disarmed Forward Sideways Left Down Sideways Right Backward Menu Navigation (Up/Down) Arm/Disarm Button Return to Home Button Power Switch LCD Screen Transmitter Battery Charge Level Throttle Rate AUX1 Status Indicator AUX2 Status Indicator Helicopter Lights Status Mode Indicator 4 • TRAXXAS Helicopter Battery Charge Level Info SAFETY PRECAUTIONS WARNING! CAUTION! DANGER! • Never fly the helicopter with low batteries. Low battery indicators include: • The transmitter or the receiver battery level indicator on the transmitter LCD starts flashing, and the transmitter starts beeping continuously. • The rear-facing green Info Status LED on the helicopter is flashing. • The helicopter loses power and lands itself (low voltage cutoff). • Alert tones from the transmitter. • Automatic return to home. • The helicopter has rotating blades that move at high speed, posing danger of damage and injury. Pilots are responsible for any actions that result in damage or injury from the improper operation of the helicopter. Choose an adequate flying space without obstacles. Do not operate the helicopter near buildings, crowds of people, high-voltage power lines, or trees to ensure the safety of yourself, others, and your model. Wear eye protection when operating your helicopter and keep your hands, face, hair, loose clothing, and foreign objects away from the rotating blades. • This model has small parts that may pose a choking hazard. Keep all small parts and electrical devices out of the reach of children and animals. • Pets can become excited by radio-controlled models. Keep pets away from your model at all times. • Your Āton is controlled by radio which is subject to interference from sources beyond your control. Radio interference can cause momentary losses of radio control; always allow a safety margin in all directions around the model to prevent collisions. • Do not attempt to rescue your model in dangerous areas or conditions. If the model does get tangled in trees, power lines, or lands on rooftops, in water, and so on, do not risk personal injury or death to yourself or others attempting to retrieve the model. • Do not fly while impaired by any substance or physical ailment. • Moisture causes damage to electronics. Avoid exposing your model, transmitter, and battery to water. • The motor, batteries, and speed control can become hot during use. Allow parts to cool before handling. • Do not leave the model unattended while it is turned on. Immediately turn the model and the transmitter off after you have safely landed the model. • Most importantly, use good common sense at all times. FIRE HAZARD! Charging and discharging batteries has the potential for fire, explosion, serious injury, and property damage if not performed per the instructions. In addition, Lithium Polymer (LiPo) batteries pose a SEVERE risk of fire if not properly handled per the instructions and require special care and handling procedures for long life and safe operation. WARNING: LiPo batteries are intended only for advanced users that are educated on the risks associated with LiPo battery use. Traxxas does not recommend that anyone under the age of 14 use or handle LiPo battery packs without the supervision of a knowledgeable and responsible adult. Dispose of used batteries according to the instructions. • Your model requires the use of LiPo batteries. LiPo batteries have a minimum safe discharge voltage threshold that should not be exceeded. The Traxxas Āton is equipped with built-in Low-Voltage Detection that alerts the pilot when LiPo batteries have reached their minimum voltage (discharge) threshold. It is the pilot’s responsibility to stop immediately to prevent the battery pack from being discharged below its safe minimum threshold. • Low-Voltage Detection is just one part of a comprehensive plan for safe LiPo battery use. It is critical to follow all instructions for safe and proper charging, use, and storage of LiPo batteries. Make sure you understand how to use your LiPo batteries. If you have questions about LiPo battery usage, please consult with your local hobby dealer or contact the battery manufacturer. As a reminder, all batteries should be recycled at the end of their useful life. • The included LiPo battery pack must be charged ONLY with a Lithium Polymer (LiPo) balance charger, such as the included LiPo balance charger, the Traxxas EZ-Peak Plus, part #2970, or the Traxxas EZ-Peak Dual, part #2972. Only use a LiPo charger compatible with Traxxas iD batteries. If you are using a LiPo balance charger that is not compatible with Traxxas iD batteries, the Traxxas balance adapter (part #2938) is required. • DO NOT use a charger designed for NiMH or NiCad batteries. Failure to use the correct charger may result in battery damage, fire, personal injury, and/or property damage. • The use of a NiMH or NiCad charger or charge mode will damage the batteries and may cause fire and personal injury. • ALWAYS inspect your LiPo batteries carefully before charging. Do not use or charge battery packs that have been damaged in any way (bent, dented, swollen, torn covering, or otherwise damaged). • DO NOT remove or change the connector on Traxxas iD batteries. Changing the connector could remove the ability to balance charge the battery pack. • BEFORE you charge, ALWAYS confirm that the charger settings exactly match the type (chemistry), specification, and configuration of the battery to be charged. DO NOT exceed the maximum manufacturer recommended charge rate. DO NOT attempt to charge non-rechargeable batteries (explosion hazard), batteries that have an internal charge circuit or a protection circuit, or batteries that have been altered from original manufacturer configuration. • While charging or discharging, ALWAYS place the battery (all types of batteries) in a fire retardant/fire proof container and on a non-flammable surface such as concrete. • ALWAYS charge batteries in a well-ventilated area. • Charge the battery in a safe area away from flammable materials. Monitor the charging process and never leave batteries unattended while charging. Do not allow small children to charge or handle LiPo batteries. • DO NOT disassemble, crush, short circuit, or expose the batteries to flame or other source of ignition. • DO NOT let any exposed battery contacts or wires touch each other. This will cause the battery to short circuit and create the risk of fire. TERMS OF USE - The buyer assumes all risk associated with using this • DO NOT leave the charger and battery unattended while charging, discharging, or anytime the product. Traxxas, its affiliates, manufacturers, distributors, and retail charger is ON with a battery connected. If there are any signs of a malfunction, unplug the power partners cannot control the use, application, charging or installation of source and/or stop the charging process immediately. this product and shall not be held responsible for any accident, injury to • ALWAYS unplug the charger from the wall outlet and disconnect the battery when not in use. persons, or damage to property resulting from the use of this product. • Never charge LiPo battery packs in series or parallel with this charger. Charging packs in series or parallel may result in improper charger cell recognition and an improper charging rate that may After reading all, if you do not agree with these terms and conditions lead to overcharging, cell imbalance, cell damage and fire. and are not prepared to accept complete liability for the use of this • If a battery gets hot to the touch during the charging process (temperature greater than 110°F / product, return this product immediately in new/unused condition to 43°C), immediately disconnect the battery from the charger and discontinue charging. your place of purchase. Your retailer absolutely cannot accept product • DO NOT store or charge LiPo batteries with or around other batteries or battery packs of any for return or exchange if it has been used in any way. type, including other LiPos. If you have any questions, call Traxxas Customer Support at • Store and transport your LiPo batteries in a cool dry place. DO NOT store in direct sunlight. DO 1-888-TRAXXAS (1-888-872-9927). Outside the US, call +1-972-549NOT allow the storage temperature to exceed 140°F or 60°C or the cells may be damaged and risk 3000 or e-mail support@traxxas.com. of fire created. ALWAYS store battery packs safely out of the reach of children and pets. • Keep a Class D fire extinguisher nearby in case of fire. • DO NOT disassemble LiPo batteries or cells. DO NOT disassemble the charger. • DO NOT attempt to build your own LiPo battery pack from loose cells. • REMOVE the battery from your model or device before charging. • DO NOT expose the charger to water or moisture. TRAXXAS • 5 PREPARING FOR FLIGHT 1. Charge the battery pack A. 2. Install batteries in the transmitter B. 45min CHARGE PROGRESS (Green LED) Red LED AAA Alkaline x 4 WARNING! It is critical to follow all instructions for safe and proper use, charging, and storage of LiPo batteries (see page 5). 3. Turn on the transmitter The transmitter will emit a rising musical tone. Always turn the transmitter on first, before connecting the helicopter battery. Green LED on LCD screen flashing “00” 4. Turn on the helicopter Open the battery compartment (A). Install the fully charged battery with the wires facing the rear of the model. Connect the battery. The helicopter will emit a musical tone and the rear-facing Power and Info Status LEDs on the helicopter will glow solid. The GPS Status LED will blink slowly (B). A. B. Confirm that the Āton is in Film Mode. If it is in Sport (Fast) or Expert Mode, press the control stick (flight stick, Mode 2) to cycle through the modes. Press the control stick until the Film Mode icon appears. 5. Locating GPS Satellites Āton is intended for outdoor flight. Select a flying location with a clear, unobstructed view of the sky. Place the helicopter on a level surface with the Status Bar facing you (nose out). A. GPS 30s- 45s A. B. GPS Home Ready to Take Off! The helicopter will sound a descending tone indicating that the flight system is ready. The GPS Status LED on the Status Bar will continue to blink slowly while the helicopter is searching for GPS satellites (A). Once the GPS position is established (usually about a minute), it will also glow solid. The Home Status LED on the Status Bar will then glow solid indicating that the current position of the helicopter has been set as the Return to Home location (B). When all four LEDs on the Status Bar are solid green, you are ready to take off! Note: If a GPS signal can not be found, move the helicopter to a different location. We recommend that you do not fly the model without GPS or a Return to Home location (see “Flying without GPS” on page 9). These features are critical to help prevent loss of your helicopter. 6 • TRAXXAS 6. Arm your helicopter for flight B. C. Move the throttle stick to the full down position. The helicopter will not arm unless the throttle stick is in the down position (A). Press and release the Arm/Disarm button on the transmitter to arm your model for take off (B). The transmitter will emit a tone and the Arm/Disarm button will glow solid green. The helicopter will emit a long tone and all four rotors will spin at idle speed (C). The helicopter is armed and ready for take off. Note: While idling, the helicopter will automatically disarm when the throttle stick is left in the full down position (zero on the LCD screen) for 2 seconds in Film Mode or 15 seconds in Sport Mode, one or more of the rotors are obstructed, or the helicopter detects an impact. AUTO TAKE-OFF (Film Mode only) With the helicopter armed and idling, gently raise the throttle stick to the center position (the LCD screen will read 50%). The transmitter will emit a descending tone until you reach the center position. The center position activates Auto Take-Off. The helicopter will automatically take off and maintain hover at 8-10 feet (2-3 meters). 8-10 feet (2-3 meters) RETURN TO HOME When all four status LEDs are glowing solid, you can automatically return to your original take-off location at any time during flight by pressing the Return to Home button on the transmitter (A). The Home status LED on the Status Bar and the Home button on the transmitter will blink slowly (B). The helicopter will position itself with the Status Bar facing the Return to Home location (nose out); then, it will rapidly move in a straight flight path back to the home location, descend, land, and disarm. The transmitter will emit a low-high-mid tone indicating that the model is returning to home. If the helicopter was flying at an altitude below 45 feet (14 meters), it will ascend to this altitude; if it was flying at an altitude above 45 feet (14 meters), it will maintain its current altitude while returning. Note: While the helicopter is descending, the control stick can be used to land the Āton in a different location other than the set home position. A. B. CONTROLLING ĀTON (FILM MODE) Your helicopter is set by default to Film Mode. Film Mode is the easiest to fly and will allow you to quickly become familiar with the controls. • Fly Higher: Raise the throttle stick past the center position and the helicopter will gain altitude. The transmitter will beep a high tone alerting you that it is climbing. The farther up you move the stick, the faster it will climb. When the desired altitude is reached, move the stick back to the center position (no sound) and the model will maintain altitude. • Fly Lower: Lower the throttle stick past the center position and the helicopter will lose altitude. The transmitter will beep a low tone alerting you that it is descending. The farther down you move the stick, the faster it will descend. When the desired altitude is reached, move the stick back to the center position (no sound) and the model will maintain altitude. • Rotating (Yaw): Move the throttle stick left or right to rotate the model around its center axis. This has no effect on the altitude. • Maneuvering: Move the control stick in the direction you want the model to travel. The farther you move the stick, the faster it will travel. Note that if the helicopter has been rotated so that the front is facing you (nose in), then the controls will seem reversed. LANDING When you are finished flying, either press the Return to Home button to automatically land the helicopter (see Return to Home below) or manually land the helicopter in a safe location by gently lowering the throttle stick to the full down position. Once you have safely landed, press and hold the fast blinking green Arm/Disarm button on the transmitter for 2 seconds to disarm your model. The helicopter will not disarm unless the throttle stick is in the down position. Above 45 feet (14 meters) 45 feet (14 meters) Below 45 feet (14 meters) B. Note: The pilot may at any time cancel Return to Home by pressing the Air Brakes button. If you press and hold the Air Brakes button, the Āton will stop and hover in place. When you release the Air Brakes button, the Āton will be operating in Film Mode. Depending on where the throttle stick is located, Āton may be moving up or down. If necessary, adjust the throttle stick to move up, move down, or hover. Use this feature to navigate around an obstacle in the Return to Home path of the model. Press the Return to Home button on the transmitter to reactivate. Resetting Home Location A. When you land and disarm the helicopter away from the original home location, the Home Status LED and the Return to Home button on your transmitter will both blink fast (A). You can set the new B. position as the Return to Home landing location by pressing the blinking Return to Home button on the transmitter (B). Note: If you do not wish to reset your home landing location, arm the helicopter and continue flying. Āton will retain the original home location. TRAXXAS • 7 Return to Home - Out of Radio Control Range Failsafe The transmitter and helicopter are equipped with an automatic fail-safe system. In the event of signal loss or interference, the transmitter will automatically switch to Film Mode and the transmitter will emit the Return to Home sound (low-high-mid tone followed by a beep). The helicopter will automatically return to the home location, land, and disarm (with a set home location) or immediately land and disarm (without a set home location; see “Flying without GPS” on page 9). Determine the reason for signal loss and resolve the problem before operating the helicopter again. Above 45 feet (14 meters) 45 feet (14 meters) +2 Beeps +2 Beeps Below 45 feet (14 meters) +2 Beeps Geofence Boundary Flying Range Approximately 500 feet (150 meters) Above 45 feet (14 meters) 45 feet (14 meters) +1 Beep +1 Beep Below 45 feet (14 meters) +1 Beep Telemetry Range Limit Control Range Limit Note: If a control signal is reestablished between the transmitter and receiver along the return to home flight path, you may cancel Return to Home by pressing the Air Brakes button (see “Air Brakes” on page 11). Release the button to regain complete control of the model in Film Mode. Return to Home - Geofence Breach Āton comes configured with a GPS-controlled boundary (geofence) with a radius of approximately 500 feet (150 meters). When Āton flies beyond this boundary, it will automatically return to home. The transmitter will emit the Return to Home sound followed by 2 beeps, indicating a geofence breach. Once inside the geofence, you may press the Air Brakes button to cancel return to home and continue flying in Film Mode. The geofence boundary does not represent the control range of the radio system. You may use the Traxxas Flight Link application to modify the distance of or remove the geofence boundary. Removing the geofence boundary can create situations where the Āton at far distances may perform autonomous behavior (such as Return to Home) and won’t be able to communicate to the operator what it is doing until it is back within telemetry range. The geofence boundary keeps Āton approximately within telemetry range for two-way communication between Āton and the operator. Return to Home - Low Voltage Failsafe (Telemetry) Within a range of about 500 feet (150 meters), the helicopter has 2-way communication with the transmitter and will alert you when the battery level is low. When the battery is nearly discharged (approximately 30 seconds before entering low voltage emergency reserve mode), the transmitter will emit a tone every 5 seconds. Immediately fly the helicopter to a safe location and land it. In the last 5 seconds, the tone will be continuous. After that, the transmitter will emit the Return to Home sound (low-high-mid tone followed by 3 beeps) and the helicopter will automatically return to the home location, land, and disarm. If necessary, use the Air Brakes button to cancel Return to Home to steer around unexpected obstacles in the return to home path. Once clear, press the Return to Home button again to continue, or maneuver and land the Āton on your own as quickly and safely as possible. WARNING: DO NOT always rely on the emergency reserve return to home function to land. Conditions such as distance, wind, and temperature can affect the battery’s end of charge reserve, resulting in a shutdown in flight. DO NOT ignore the first battery low voltage warning, but safely return and land as soon as possible. To prevent permanent damage to your battery pack, ALWAYS disconnect the battery whenever the helicopter is not in use. Please note that if you have disabled or increased the radius of the default geofence, this will affect your ability to receive battery alerts. Refer to the the section “Flying without the Geofence Protection” on page 9 for more information. Above 45 feet (14 meters) 45 feet (14 meters) +3 Beeps +3 Beeps Below 45 feet (14 meters) +3 Beeps Low Battery Warning Tone Timeline 8 • TRAXXAS Urgent Warning Tone Return to Home is Your Extra Security Āton’s sophisticated Return to Home functions are there to help whenever you need it. If you ever encounter a difficult or uncomfortable situation, such as losing directional orientation, loss of visual contact, high winds, flying too high and so on, simply press the Return to Home button. Let Āton bring itself back to you quickly and safely. Āton’s Return to Home function can be especially helpful if you are learning how to fly for fun in Sport or Expert Modes. Flying without GPS (without a Return to Home Location) WARNING: The Āton has tremendous power and capability; it can very easily get out of your line of sight. Flying the helicopter without a satellite GPS signal and a set Return to Home location has the risk of losing your helicopter. We do not recommend flying Āton without GPS fully enabled and functioning. If the helicopter encounters an emergency situation during flight without GPS, such as loss of the radio control signal or critically low battery, Āton will attempt to safely land and disarm. This can result in loss of the Āton if it is, for example, over water or some other area where it can’t be retrieved. To help prevent problems, always fly with GPS enabled and avoid flying over areas where an unexpected emergency landing could endanger the Āton or nearby people and property. If for some reason you decide it is necessary to operate Āton without GPS, you can override the satellite search function by pressing and holding the Arm/Disarm button on the transmitter for 2 seconds. This will arm the helicopter for flight, but the Return to Home function will be deactivated (the GPS Status LED on the Status Bar will continue to blink green slowly during flight). When you are finished flying, land the helicopter in a safe location. Move the throttle stick to the full down position. Press and hold the fast blinking green Arm/Disarm button on the transmitter for 2 seconds to disarm your model. The helicopter will not disarm unless the throttle stick is in the full down position. Note: If a satellite GPS signal is found during flight, the GPS Status LED on the Status Bar will glow solid green indicating that the Return to Home function is now active. This location will be set as the Return to Home location. To choose a different location, land the helicopter, disarm it, and then follow the instructions in the “Resetting Home Location” section on page 7. Flying without the Geofence Protection The Āton is programmed with default geofence protection that keeps Āton within the range of the telemetry communication. The geofence radius is set to about 500 feet (150 meters) and can be adjusted or removed using the Traxxas Flight Link App. If you remove the geofence, you can encounter situations where the Āton is flying autonomously (such as Return to Home) without providing information to the pilot about its actions until it flies within telemetry range. Once in range, the tansmitter will provide alerts to the pilot. For example, if the Āton’s battery reaches the end of its charge while the Āton is flying beyond telemetry range, the pilot will not receive the progression of prompts from the transmitter to return and land. When the battery reaches its critical threshold, Āton will return to home automatically without alerting the pilot until Āton is inside telemetry range with the Return to Home sound followed by three beeps. When you observe the Āton flying autonomously and returning to home, do not cancel return to home until you receive an alert that informs you of the reason it is returning to home. If the reason is a low battery, then allow Āton to return and land on its own. We recommend that pilots do not disable or extend the geofence range unless they are fully familiar and confident in how the Āton responds to different circumstances. *Compatible with GoPro® Hero3, Hero3+, or Hero4 If one or more of the rotor blades are obstructed, the helicopter will disarm itself. Move the helicopter to a clear area, remove the obstruction, arm the helicopter again, and continue flying. If the helicopter will not fly correctly, unplug the battery and inspect the helicopter for damage. “FIND ME” BEEPER If the helicopter lands and disarms out of your line of sight, it is equipped with a beeper to help determine its location. To activate the beeper, move the throttle stick on the transmitter to the full down position (the beeper will not activate unless the throttle stick is in the down position); then, move the flight stick right and back. HELPFUL FLYING TIPS Controls are reversed as the model flies toward you. • When your model is flying away from you, the helicopter reacts to direction changes just as you command. If you command the model to move right, it will move to your right as you commanded. • When the helicopter is coming toward you and you command the model to move right, the model will move to your left. Always remember that the model flies forward, reverse, right, and left relative to the position of itself, not relative to your position. • Until you become used to reversing your control inputs as the model changes direction, allow yourself extra flying room to accommodate pilot error. • To help with directional control, it may help to imagine yourself sitting in the cockpit of the helicopter. • The model will react quickly to your commands. At first, move the controls SLOWLY and make small, gentle control movements to avoid loss of control. If you ever feel you don’t have complete control of the helicopter, maintain altitude with the throttle stick and release the opposite stick to return to level flight (Film and Fast Mode). • Fly the Āton with the Status Bar facing you (nose out) until you become familiar with the flight controls and different behaviors of the helicopter. • Fly at least 8-10 feet (2-3 meters) above the ground to avoid ground turbulence for a more stable and controllable flight. Be prepared for altitude changes as you fly. Forward/reverse and left/right movements may increase or reduce lift, causing the helicopter to gain or lose altitude. Be prepared to react to altitude changes by adjusting the throttle as you fly the model. TRAXXAS • 9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Modify Date : 2016:04:15 16:07:51+08:00 Creator : pdfsam-console (Ver. 2.4.1e) Create Date : 2016:04:15 16:07:51+08:00 Producer : iText 2.1.7 by 1T3XT Page Count : 9EXIF Metadata provided by EXIF.tools